Round-robin (RR) is no longer used in the allocation of the bitmap table,
and all the function input parameters that use this mechanism are
BITMAP_NO_RR. The code that defines and uses the RR needs to be deleted.

Link: https://lore.kernel.org/r/1623325814-55737-4-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The refcount_t API will WARN on underflow and overflow of a reference
counter, and avoid use-after-free risks.

Link: https://lore.kernel.org/r/1622194663-2383-10-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The base address table is allocated by dma allocator, and the size is
always aligned to PAGE_SIZE. If a fixed size is used to allocate the
table, the number of base address entries stored in the table will be
smaller than that can actually stored.

Link: https://lore.kernel.org/r/1621589395-2435-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The doorbell update interfaces are very similar for different queues, such
as SQ, RQ, SRQ, CQ and EQ. So reorganize these code and also fix some
inappropriate naming.

Link: https://lore.kernel.org/r/1616840738-7866-3-git-send-email-liweihang@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.

Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().

Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Split the SRQ creation process into multiple steps and encapsulate them
into functions.

Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.

Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.

Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Split the hns_roce_mtr_create() into serval small functions, remove unused
member in 'struct hns_roce_buf_attr' and delete unnecessary MTR page count
check flow to make the MTR creation related codes clearer.

Link: https://lore.kernel.org/r/1611395282-991-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Some %d in print format string should be %u, and some prints miss the
useful errno or are in nonstandard format. Just fix above issues.

Link: https://lore.kernel.org/r/1607650657-35992-11-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Just format the code without modifying anything, including fixing some
redundant and missing blanks and spaces and changing the variable
definition order.

Link: https://lore.kernel.org/r/1607650657-35992-8-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

For ib_copy_from_user(), the length of udata may not be the same as that
of cmd. For ib_copy_to_user(), the length of udata may not be the same as
that of resp. So limit the length to prevent out-of-bounds read and write
operations from ib_copy_from_user() and ib_copy_to_user().

Fixes: de77503a ("RDMA/hns: RDMA/hns: Assign rq head pointer when enable rq record db")
Fixes: 633fb4d9 ("RDMA/hns: Use structs to describe the uABI instead of opencoding")
Fixes: ae85bf92 ("RDMA/hns: Optimize qp param setup flow")
Fixes: 6fd610c5 ("RDMA/hns: Support 0 hop addressing for SRQ buffer")
Fixes: 9d9d4ff7 ("RDMA/hns: Update the kernel header file of hns")
Link: https://lore.kernel.org/r/1607650657-35992-2-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

These flags will be returned to the userspace through ABI, so they should
be defined in hns-abi.h. Furthermore, there is no need to include
hns-abi.h in every source files, it just needs to be included in the
common header file.

Link: https://lore.kernel.org/r/1606872560-17823-1-git-send-email-liweihang@huawei.comReported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

uverbs was blocking srq_types the driver doesn't support based on the
CREATE_XSRQ cmd_mask. Fix all drivers to check for supported srq_types
during create_srq and move CREATE_XSRQ to the core code.

Link: https://lore.kernel.org/r/5-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.comSigned-off-by: NJason Gunthorpe <jgg@nvidia.com>

In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.

Fixes: 68e326de ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Some variables have been initialized when used. As a result, here removes
some unncessary initial assignment.

Link: https://lore.kernel.org/r/1599547944-30671-1-git-send-email-oulijun@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.

This reverts commit 711195e5.

Fixes: 711195e5 ("RDMA/hns: Reserve one sge in order to avoid local length error")
Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The redundant parameters "hr_dev" need to be removed from
free_kernel_wrid() and free_srq_wrid().

Link: https://lore.kernel.org/r/1590152579-32364-3-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When rq/srq sge length is smaller than sq sge length, it will produce a
local length error and may cause the bus to hang. Therefore, for rq wqe
and srq wqe, one reserved sge pointing to a reserved mr is used to avoid
this error.

Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Rename the PAGE_ADDR_SHIFT as HNS_HW_PAGE_SHIFT to make code more
readable.

Link: https://lore.kernel.org/r/1588931159-56875-9-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Optimize the SRQ's WQE buffer parameters calculating process to make the
codes more readable by using new functions about multi-hop addressing to
calculating capabilities of SRQ.

Link: https://lore.kernel.org/r/1588071823-40200-6-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add the zero hop addressing support by using mtr interface for SRQ buffer,
so the hns driver can support addressing hopnum between 0 to 3 for SRQ.

Link: https://lore.kernel.org/r/1586779091-51410-6-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When the value of nbufs is 1, the buffer is in direct mode, which may cause
confusion. So optimizes current codes to make it easier to maintain and
understand.

Link: https://lore.kernel.org/r/1586779091-51410-3-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Some magic numbers are hard to understand, so replace them with macros or
add some comments for them.

Link: https://lore.kernel.org/r/20200126145504.9700-1-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

So far the assumption was that ib_umem_get() and ib_umem_odp_get()
are called from flows that start in UVERBS and therefore has a user
context. This assumption restricts flows that are initiated by ULPs
and need the service that ib_umem_get() provides.

This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device
directly by relying on the fact that both UVERBS and ULPs sets that
field correctly.
Reviewed-by: NGuy Levi <guyle@mellanox.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

The argument is always ignored, so remove it.

Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Acked-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Modify some printings that is not in uniformed style, non-standard or with
spelling errors.

Link: https://lore.kernel.org/r/1572952082-6681-10-git-send-email-liweihang@hisilicon.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It is better to return a linux error code than define a private constant.

Link: https://lore.kernel.org/r/1572952082-6681-9-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Replace "sw2hw" and "hw2sw" which is hard to understand with "create" and
"destroy".

Link: https://lore.kernel.org/r/1572952082-6681-6-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use wqe_cnt instead of max which means the queue size of srq, and remove
wqe_ctr which is not used.

Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

srq_desc_size should be rounded up to pow of two before used, or related
calculation may cause allocating wrong size of memory for srq buffer.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1572575610-52530-3-git-send-email-liweihang@hisilicon.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The parameters npages used to initial mtt of srq->idx_que shouldn't be
same with srq's. And page_shift should be calculated from idx_buf_pg_sz.
This patch fixes above issues and use field named npage and page_shift
in hns_roce_buf instead of two temporary variables to let us use them
anywhere.

Fixes: 18df508c ("RDMA/hns: Remove if-else judgment statements for creating srq")
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-3-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Delete the assignment of srq->ibsrq.ext.xrc.srq_num, beacause this
value is not used.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-9-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Because if the value of srqwqe_buf_pg_sz is zero, npages and
ib_umem_page_count are equivalent, page_shif and PAGE_SHIFT
are equivalent in hns_roce_create_srq. Here remove it.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-8-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Move the related codes of creating user srq and kernel srq into two
independent functions as well as remove some unused code and
simplifications.

Link: https://lore.kernel.org/r/1562593285-8037-3-git-send-email-oulijun@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch removes the hns-roce.ko for cleanup all the exported symbols in
common part.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Update ib_umem_release() to behave similarly to kfree() and allow
submitting NULL pointer as safe input to this function.

Fixes: a52c8e24 ("RDMA: Clean destroy CQ in drivers do not return errors")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>