Disclose the user task doing ALSA access when requested by
the debug bitmask.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

Handle multiple brightness hotkey presses between two polling cycles.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

Extract the backlight level range size detection from the brightness
subdriver, and allow the other subdrivers access to that information.

This also allows us to relocate some code to a more convenient place.
The moved code was largerly unmodified, except for the return type of
tpacpi_check_std_acpi_brightness_support(), which now is correctly
marked as returning "unsigned int", and and two cosmetic fixes to make
checkpatch.pl happy.

Fixes for the NVRAM polling mode for the brightness hotkeys will need
this.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

Move the driver initial greetings out of the first subdriver, as we do a
lot of other initialization before that point, and the initial greetings
should go as soon as the driver decides that it should load.

These greetings are not cosmetic, they make my life easier when users
report bugs.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

The hotkey polling code is supposed to generate hotkey messages as
close to the way the IBM event-based volume hotkey firmware does as
possible, i.e:

* Pressing MUTE issues a mute hotkey event, even if already mute;

* Pressing Volume up/down issues a volume up/down hotkey event,
  even if already at maximum or minumum volume;

* The act of unmuting issues a volume up/down event, depending on
  which hotkey was used to unmute.

Fix the code to do just that (mute handling was incorrect), and handle
multiple hotkey presses between two polling cycles.

The new code uses the volume_toggle bit in NVRAM only to detect
repeated presses of the mute key and multiple presses of the volume
keys trying to go past the end of the volume scale.  This will work
around a bug in recent Lenovo firmware (e.g. T400), which causes the
firmware to not update the volume_toggle bit in certain situations.
Reported-by: NYang Zhe <yangzhe1990@gmail.com>
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

The X100e needs some quick fixes to work semi-right with this driver.
There are much better ways to do this, but we can start with a quick
update and do it properly later.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

Lenovo is playing around with its ACPI BIOS, and will end up reusing
method names.  Their memory is not nearly as long as thinkpad-acpi's...

Secure most of the old IBM codepaths against running in a non-IBM box.
This would happen on the Lenovo X100e in video_init(), for example.  We
would misdetect it as an ancient model 570 firmware.

Also, refuse to load the driver if we cannot identify the vendor.  No
ACPI ThinkPad in existence lacks this information, AFAIK.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

commit 672917dc ("cpuidle: menu governor: reduce latency on exit")
added an optimization, where the analysis on the past idle period moved
from the end of idle, to the beginning of the new idle.

Unfortunately, this optimization had a bug where it zeroed one key
variable for new use, that is needed for the analysis.  The fix is
simple, zero the variable after doing the work from the previous idle.

During the audit of the code that found this issue, another issue was
also found; the ->measured_us data structure member is never set, a
local variable is always used instead.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Corrado Zoccolo <czoccolo@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move initialization of the virtio framework before the initialization of
mtd, so that block2mtd can be used on virtio-based block devices.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644Signed-off-by: NStijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some time ago we stopped the clean/active metadata updates
from being written to a 'spare' device in most cases so that
it could spin down and say spun down.  Device failure/removal
etc are still recorded on spares.

However commit 51d5668c broke this 50% of the time,
depending on whether the event count is even or odd.
The change log entry said:

   This means that the alignment between 'odd/even' and
    'clean/dirty' might take a little longer to attain,

how ever the code makes no attempt to create that alignment, so it
could take arbitrarily long.

So when we find that clean/dirty is not aligned with odd/even,
force a second metadata-update immediately.  There are already cases
where a second metadata-update is needed immediately (e.g. when a
device fails during the metadata update).  We just piggy-back on that.
Reported-by: NJoe Bryant <tenminjoe@yahoo.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

Fix: Raid-6 was not trying to correct a read-error when in
singly-degraded state and was instead dropping one more device, going to
doubly-degraded state. This patch fixes this behaviour.
Tested-by: NJanos Haar <janos.haar@netcenter.hu>
Signed-off-by: NGabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com>
Reported-by: NJanos Haar <janos.haar@netcenter.hu>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

It's unused and buggy in its current form, since it can place a bo
in the reserved state without removing it from lru lists.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Bring radeon up to speed with the async event synchronization for
drmWaitVblank. See c9a9c5e0 for
more information. Without this patch event never get delivered
to userspace client.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move the fifo reset from pxa_camera_start_capture to pxa_camera_irq direct
before the dma start after an end of frame interrupt to prevent images from
shifting because of old data at the begin of the frame.
Signed-off-by: NStefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Tested-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

soc_mbus_bytes_per_line() returns -EINVAL on error but we store it in an
unsigned int so the test for less than zero doesn't work.  I think it
always returns "small" positive values so we can just cast it to int
here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This fixes a regression of

	7d58289f (mx1: prefix SOC specific defines with MX1_ and deprecate old names)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Never call dvb_frontend_detach if we failed to attach a frontend. This fixes
the following oops, which will be triggered by a missing stv090x module:

[    8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[    8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29
[    8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    8.562047] DVB: Unable to find symbol stv090x_attach()
[    8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac
[    8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core]

Ref http://bugs.debian.org/575207Signed-off-by: NBjørn Mork <bjorn@mork.no>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Send one DiSEqC byte to make sure that the pin is set to low level.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Reviewed-by: NManu Abraham <abraham.manu@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix
regression where v4l2_device was registered too late) caused a new
regression in the av7110 driver.

Reverted the old fix and fixed the problem in the mxb driver instead.
Tested on mxb and budget-av cards.

The real problem is that the saa7146 framework has separate probe()
and attach() driver callbacks which should be rolled into one. This
is now done for the mxb driver, but others should do the same. Lack
of hardware makes this hard to do, though. I hope to get hold of some
hexium cards and then I can try to improve the framework to prevent
this from happening again.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As part of upstream merge, set_params() function was removed from isif.c.
This requires removal of BUG_ON() and check for set_params ptr in
vpfe_capture.c. Without this kernel crash dump is seen while bootup on DM365

Also made following changes:-

 1) converted error messages to debug messages since it is not right to flood
    the console with error messages for user mistakes.
 2) returns -EINVAL if ioctl is not supported
Signed-off-by: NMuralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The 0461:0815 camera is spca561 based not spca508
Signed-off-by: NJohn Ellson <john.ellson@comcast.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The 046d:08da usb id shouldn't be associated with the stv06xx driver as they're
not compatible with each other.
This fixes a bug where Quickcam Messenger cams fail to use its proper driver
(gspca-zc3xx), rendering the camera inoperable.
Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Tested-by: NGabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
CC: Brian Johnson <brijohn@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

xawtv using DGA on a Radeon graphics card provides bogus
values to S_FBUF, which will then screw up overlay video:

https://bugs.launchpad.net/ubuntu/+source/xawtv/+bug/499734

This fixes the bytesperline value if it is off completely.
Signed-off-by: NMichael Hunold <michael@mihu.de>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes a bug in vpfe_probe() that doesn't call mutex_unlock() if memory
allocation for ccdc_cfg fails. See also the smatch warning report from Dan
Carpenter that shows this as an issue.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMuralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The previous loop goes until last == VIDEO_MAX_FRAME, so this could
potentially go one past the end of the loop.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add Dell Studio models (1558, 1557, 1555) to the 'set_sci_en_on_resume'
list to fix hang on resume.

BugLink: http://bugs.launchpad.net/bugs/553498Signed-off-by: NKamal Mostafa <kamal@canonical.com>
Acked-by: NAlex Chiang <achiang@canonical.com>
Cc: stable@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_hest_firmware_first_pci() could be called when acpi is disabled
and cause system oops.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_device_class can only be 19 characters and a NULL terminator.

With the current name we get a buffer overflow in acpi_smbus_hc_add()
when we do:
	strcpy(acpi_device_class(device), ACPI_SMB_HC_CLASS);
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_device_class can only be 19 characters and a NULL terminator.

The current code has a buffer overflow in acpi_power_meter_add():
       strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS);
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

cpi_device_class can only be 19 characters and a NULL terminator.

With the current name we get a buffer overflow in acpi_pad_add()
	strcpy(acpi_device_class(device), ACPI_PROCESSOR_AGGREGATOR_CLASS);

[akpm@linux-foundation.org: call it acpi_pad, per Shaohua Li]
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: walter harms <wharms@bfs.de>
Acked-by: NShaohua Li <shaohua.li@intel.com>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

With fa35b492, I broke a lot of PNP resource assignment.  That commit made
PNPACPI include bridge windows as PNP resources, and PNP resource assignment
treats any enabled overlapping PNP resources as conflicts.  Since PCI host
bridge windows typically include most of the I/O port space, this makes PNP
port assigments fail.

The PCI host bridge driver will eventually use those PNP window resources,
so we should make PNP ignore them when checking for conflicts.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=15903Reported-and-tested-by: NPavel Kysilka <goldenfish@linuxsoft.cz>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fix a number of Oopses, memory leaks and unbalanced calls on error paths in
sh_mobile_lcdcfb.c.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Both were "removed" in commit a33eb6b9.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch fixes the bad hashes for one Kingston and one Transcend card.
Thanks to komuro for pointing this out.
Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Multiple Lenovo ThinkPad models with Intel Core i5/i7 CPUs can
successfully suspend/resume once, and then hang on the second s/r
cycle.

We got confirmation that this was due to a BIOS defect. The BIOS
did not properly set SCI_EN coming out of S3. The BIOS guys
hinted that The Other Leading OS ignores the fact that hardware
owns the bit and sets it manually.

In any case, an existing DMI table exists for machines where this
defect is a known problem. Lenovo promise to fix their BIOS, but
for folks who either won't or can't upgrade their BIOS, allow
Linux to workaround the issue.

https://bugzilla.kernel.org/show_bug.cgi?id=15407
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/532374

Confirmed by numerous testers in the launchpad bug that using
acpi_sleep=sci_force_enable fixes the issue. We add the machines
to acpisleep_dmi_table[] to automatically enable this workaround.

Cc: stable@kernel.org
Cc: Colin King <colin.king@canonical.com>
Signed-off-by: NAlex Chiang <achiang@canonical.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

There's nastyness in the way we currently handle barriers (and
discards): They're effectively filesystem commands, but they get
processed as BLOCK_PC commands.  Unfortunately BLOCK_PC commands are
taken by SCSI to be SG_IO commands and the issuer expects to see and
handle any returned errors, however trivial.  This leads to a huge
problem, because the block layer doesn't expect this to happen and any
trivially retryable error on a barrier causes an immediate I/O error
to the filesystem.

The only real way to hack around this is to take the usual class of
offending errors (unit attentions) and make them all retryable in the
case of a REQ_HARDBARRIER.  A correct fix would involve a rework of
the entire block and SCSI submit system, and so is out of scope for a
quick fix.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>