- 08 12月, 2010 2 次提交
-
-
由 Francisco Jerez 提交于
nvxx_graph_isr is already taking care of it. In some cases this could've made you miss PGRAPH interrupts (e.g. when you were supposed to get several IRQs of the same kind in a row). Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
No functional changes, just simplify some code paths a bit. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 03 12月, 2010 38 次提交
-
-
由 Francisco Jerez 提交于
In typical Apple fashion there's no standard information about what encoders are present on this machine, this patch adds a quirk to provide it. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
These have been unused since UMS support was ripped out, so lets remove them completely. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Fix running of destroy_context() when create_context() has never been called for the channel, and fill in engine's tlb_flush() function pointer. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Allows callers to install their own handlers for when a GPIO line changes state (such as for hotplug detect). This also fixes a bug where we weren't acknowledging the GPIO IRQ until after the bottom half had run, causing a severe IRQ storm in some cases. Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Lets start to clean up this mess! Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Reported-by: NPekka Paalanen <pq@iki.fi> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Tested-by: NXavier Chantry <chantry.xavier@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
The point is to share more code between the PFB/PGRAPH tile region hooks, and give the hardware specific functions a chance to allocate per-region resources. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
nouveau_bo_move_m2mf() needs to lock the kernel channel, and it may be called from the pushbuf IOCTL with an user channel already locked. Use a separate subclass for the kernel channel mutex because this is legitimate mutex nesting. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
In a multihead setup vblank interrupts may end up enabled in both heads. In that case we want to ignore the vblank interrupts coming from the wrong CRTC to avoid tearing and unbalanced calls to drm_vblank_get/put (fdo bug 31074). Reported-by: NFelix Leimbach <felix.leimbach@gmx.net> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
nv0x-nv4x should be mostly fine, nv50 doesn't work yet. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
nouveau_fence_* functions are not type safe, which could lead to bugs. Additionally every use of nouveau_fence_unref had to cast struct nouveau_fence to void **. Fix it by renaming old functions and creating static inline functions with new prototypes. We still need old functions, because we pass function pointers to ttm. As we are wrapping functions, drop unused "void *arg" parameter where possible. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Only supported on NV50+ so far, and disabled by default currently. The module parameter "msi=1" will enable it. There's a kernel bug which will cause this to fail if the module (or the NVIDIA binary driver) has ever been loaded before loading nouveau with MSI enabled. As such, this is only safe to enable if you have nouveau load on boot, and don't wish to ever reload it. The workaround is to "echo 0 > /sys/bus/pci/devices/<device>/enable" until the enable count reads 0. Then you should be able to load nouveau with MSI enabled. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Not an issue right now, we're forced to 64k size/alignment by the BO allocator anyway. This won't be the case soon. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This doesn't work yet for unknown reasons. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-