Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 17 9月, 2011 1 次提交
  3. 16 9月, 2011 1 次提交
    • M
      nfsd41: try to check reply size before operation · 58e7b33a
      由 Mi Jinlong 提交于 
      For checking the size of reply before calling a operation,
we need try to get maxsize of the operation's reply.

v3: using new method as Bruce said,

 "we could handle operations in two different ways:

	- For operations that actually change something (write, rename,
	  open, close, ...), do it the way we're doing it now: be
	  very careful to estimate the size of the response before even
	  processing the operation.
	- For operations that don't change anything (read, getattr, ...)
	  just go ahead and do the operation.  If you realize after the
	  fact that the response is too large, then return the error at
	  that point.

  So we'd add another flag to op_flags: say, OP_MODIFIES_SOMETHING.  And for
  operations with OP_MODIFIES_SOMETHING set, we'd do the first thing.  For
  operations without it set, we'd do the second."
Signed-off-by: NMi Jinlong <mijinlong@cn.fujitsu.com>
[bfields@redhat.com: crash, don't attempt to handle, undefined op_rsize_bop]
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      58e7b33a
  5. 14 9月, 2011 1 次提交
  7. 07 9月, 2011 1 次提交
  9. 01 9月, 2011 4 次提交
  11. 28 8月, 2011 1 次提交
  13. 27 8月, 2011 2 次提交
    • J
      nfsd4: it's OK to return nfserr_symlink · 75c096f7
      由 J. Bruce Fields 提交于 
      The nfsd4 code has a bunch of special exceptions for error returns which
map nfserr_symlink to other errors.

In fact, the spec makes it clear that nfserr_symlink is to be preferred
over less specific errors where possible.

The patch that introduced it back in 2.6.4 is "kNFSd: correct symlink
related error returns.", which claims that these special exceptions are
represent an NFSv4 break from v2/v3 tradition--when in fact the symlink
error was introduced with v4.

I suspect what happened was pynfs tests were written that were overly
faithful to the (known-incomplete) rfc3530 error return lists, and then
code was fixed up mindlessly to make the tests pass.

Delete these unnecessary exceptions.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      75c096f7
    • J
      nfsd4: clean up S_IS -> NF4 file type mapping · 3d2544b1
      由 J. Bruce Fields 提交于 
      A slightly unconventional approach to make the code more compact I could
live with, but let's give the poor reader *some* chance.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      3d2544b1
  15. 20 8月, 2011 1 次提交
  17. 18 7月, 2011 2 次提交
  19. 16 7月, 2011 2 次提交
  21. 19 5月, 2011 1 次提交
  23. 30 4月, 2011 2 次提交
  25. 18 3月, 2011 1 次提交
  27. 09 3月, 2011 1 次提交
  29. 17 2月, 2011 1 次提交
  31. 12 1月, 2011 2 次提交
  33. 05 1月, 2011 3 次提交
  35. 30 12月, 2010 1 次提交
  37. 18 12月, 2010 1 次提交
  39. 20 11月, 2010 1 次提交
  41. 02 10月, 2010 1 次提交
  43. 10 8月, 2010 1 次提交
    • C
      pass a struct path to vfs_statfs · ebabe9a9
      由 Christoph Hellwig 提交于 
      We'll need the path to implement the flags field for statvfs support.
We do have it available in all callers except:

 - ecryptfs_statfs.  This one doesn't actually need vfs_statfs but just
   needs to do a caller to the lower filesystem statfs method.
 - sys_ustat.  Add a non-exported statfs_by_dentry helper for it which
   doesn't won't be able to fill out the flags field later on.

In addition rename the helpers for statfs vs fstatfs to do_*statfs instead
of the misleading vfs prefix.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      ebabe9a9
  45. 31 7月, 2010 1 次提交
  47. 23 6月, 2010 1 次提交
  49. 14 5月, 2010 1 次提交
  51. 13 5月, 2010 1 次提交
    • B
      nfsd4: keep a reference count on client while in use · d7682988
      由 Benny Halevy 提交于 
      Get a refcount on the client on SEQUENCE,
Release the refcount and renew the client when all respective compounds completed.
Do not expire the client by the laundromat while in use.
If the client was expired via another path, free it when the compounds
complete and the refcount reaches 0.

Note that unhash_client_locked must call list_del_init on cl_lru as
it may be called twice for the same client (once from nfs4_laundromat
and then from expire_client)
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
      d7682988
  53. 04 5月, 2010 1 次提交
  55. 03 5月, 2010 1 次提交
  57. 27 4月, 2010 1 次提交
    • N
      nfsd4: bug in read_buf · 2bc3c117
      由 Neil Brown 提交于 
      When read_buf is called to move over to the next page in the pagelist
of an NFSv4 request, it sets argp->end to essentially a random
number, certainly not an address within the page which argp->p now
points to.  So subsequent calls to READ_BUF will think there is much
more than a page of spare space (the cast to u32 ensures an unsigned
comparison) so we can expect to fall off the end of the second
page.

We never encountered thsi in testing because typically the only
operations which use more than two pages are write-like operations,
which have their own decoding logic.  Something like a getattr after a
write may cross a page boundary, but it would be very unusual for it to
cross another boundary after that.

Cc: stable@kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
      2bc3c117
  59. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      由 Tejun Heo 提交于 
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6