We can only scan for partitions on the whole disk, so move the flag
from struct block_device to struct gendisk.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It is possible, albeit more unlikely, for a block device to have a non
power-of-2 for chunk_sectors (e.g. 10+2 RAID6 with 128K chunk_sectors,
which results in a full-stripe size of 1280K. This causes the RAID6's
io_opt to be advertised as 1280K, and a stacked device _could_ then be
made to use a blocksize, aka chunk_sectors, that matches non power-of-2
io_opt of underlying RAID6 -- resulting in stacked device's
chunk_sectors being a non power-of-2).

Update blk_queue_chunk_sectors() and blk_max_size_offset() to
accommodate drivers that need a non power-of-2 chunk_sectors.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Like 'io_opt', blk_stack_limits() should stack 'chunk_sectors' using
lcm_not_zero() rather than min_not_zero() -- otherwise the final
'chunk_sectors' could result in sub-optimal alignment of IO to
component devices in the IO stack.

Also, if 'chunk_sectors' isn't a multiple of 'physical_block_size'
then it is a bug in the driver and the device should be flagged as
'misaligned'.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bmd is allocated using kmalloc in bio_alloc_map_data, so make sure
is_null_mapped is properly initialized to false for the !null_mapped
case.

Fixes: f3256075 ("block: remove the BIO_NULL_MAPPED flag")
Reported-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.

the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x;
@@

x =
- kzalloc
+ kmalloc
 (...)
...
sg_init_table(x,...)
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Do not need check the bps or iops limitation if bps or iops is unlimited.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The tg_may_dispatch() will call tg_with_in_bps_limit() and
tg_with_in_iops_limit() to check if we can dispatch a bio or
not, which will calculate bps/iops limitation multiple times.
But tg_may_dispatch() is always called under queue lock, which
means the bps/iops limitation will not change in tg_may_dispatch().

So we can calculate the bps/iops limitation only once, and pass
them to tg_with_in_bps_limit() and tg_with_in_iops_limit() to
avoid calculating bps/iops limitation repeatedly.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The 'throtl_grp_quantum' and 'throtl_quantum' are both read-only
variables, thus better to use readable macros instead of static
variables, which can also save some spaces for .bss area.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use readable READ/WRITE macros instead of magic numbers.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix some comments' typos.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

adjust_inuse_and_calc_cost() is responsible for reducing the amount of
donated weights dynamically in period as the budget runs low. Because we
don't want to do full donation calculation in period, we keep latching up
inuse by INUSE_ADJ_STEP_PCT of the active weight of the cgroup until the
resulting hweight_inuse is satisfactory.

Unfortunately, the adj_step calculation was reading the active weight before
acquiring ioc->lock. Because the current thread could have lost race to
activate the iocg to another thread before entering this function, it may
read the active weight as zero before acquiring ioc->lock. When this
happens, the adj_step is calculated as zero and the incremental adjustment
loop becomes an infinite one.

Fix it by fetching the active weight after acquiring ioc->lock.

Fixes: b0853ab4 ("blk-iocost: revamp in-period donation snapbacks")
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Conceptually, root_iocg->hweight_donating must be less than WEIGHT_ONE but
all hweight calculations round up and thus it may end up >= WEIGHT_ONE
triggering divide-by-zero and other issues. Bound the value to avoid
surprises.

Fixes: e08d02aa ("blk-iocost: implement Andy's method for donation weight updates")
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This enables proper statistics in /proc/diskstats for bcache partitions.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Reviewed-by: NColy Li <colyli@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This enables proper statistics in /proc/diskstats for md partitions.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

These functions can be used to enable iostat for partitions on devices
like md, bcache.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

NVMe shares tagset between fabric queue and admin queue or between
connect_q and NS queue, so hctx_may_queue() can be called to allocate
request for these queues.

Tags can be reserved in these tagset. Before error recovery, there is
often lots of in-flight requests which can't be completed, and new
reserved request may be needed in error recovery path. However,
hctx_may_queue() can always return false because there is too many
in-flight requests which can't be completed during error handling.
Finally, nothing can proceed.

Fix this issue by always allowing reserved tag allocation in
hctx_may_queue(). This is reasonable because reserved tags are supposed
to always be available.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Cc: David Milburn <dmilburn@redhat.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

scsi/sg.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The test and the explaination of the patch as bellow.

Before test we added more debug code in blkg_async_bio_workfn():
	int count = 0
	if (bios.head && bios.head->bi_next) {
		need_plug = true;
		blk_start_plug(&plug);
	}
	while ((bio = bio_list_pop(&bios))) {
		/*io_punt is a sysctl user interface to control the print*/
		if(io_punt) {
			printk("[%s:%d] bio start,size:%llu,%d count=%d plug?%d\n",
				current->comm, current->pid, bio->bi_iter.bi_sector,
				(bio->bi_iter.bi_size)>>9, count++, need_plug);
		}
		submit_bio(bio);
	}
	if (need_plug)
		blk_finish_plug(&plug);

Steps that need to be set to trigger *PUNT* io before testing:
	mount -t btrfs -o compress=lzo /dev/sda6 /btrfs
	mount -t cgroup2 nodev /cgroup2
	mkdir /cgroup2/cg3
	echo "+io" > /cgroup2/cgroup.subtree_control
	echo "8:0 wbps=1048576000" > /cgroup2/cg3/io.max #1000M/s
	echo $$ > /cgroup2/cg3/cgroup.procs

Then use dd command to test btrfs PUNT io in current shell:
	dd if=/dev/zero of=/btrfs/file bs=64K count=100000

Test hardware environment as below:
	[root@localhost btrfs]# lscpu
	Architecture:          x86_64
	CPU op-mode(s):        32-bit, 64-bit
	Byte Order:            Little Endian
	CPU(s):                32
	On-line CPU(s) list:   0-31
	Thread(s) per core:    2
	Core(s) per socket:    8
	Socket(s):             2
	NUMA node(s):          2
	Vendor ID:             GenuineIntel

With above debug code, test command and test environment, I did the
tests under 3 different system loads, which are triggered by stress:
1, Run 64 threads by command "stress -c 64 &"
	[53615.975974] [kworker/u66:18:1490] bio start,size:45583056,8 count=0 plug?1
	[53615.975980] [kworker/u66:18:1490] bio start,size:45583064,8 count=1 plug?1
	[53615.975984] [kworker/u66:18:1490] bio start,size:45583072,8 count=2 plug?1
	[53615.975987] [kworker/u66:18:1490] bio start,size:45583080,8 count=3 plug?1
	[53615.975990] [kworker/u66:18:1490] bio start,size:45583088,8 count=4 plug?1
	[53615.975993] [kworker/u66:18:1490] bio start,size:45583096,8 count=5 plug?1
	... ...
	[53615.977041] [kworker/u66:18:1490] bio start,size:45585480,8 count=303 plug?1
	[53615.977044] [kworker/u66:18:1490] bio start,size:45585488,8 count=304 plug?1
	[53615.977047] [kworker/u66:18:1490] bio start,size:45585496,8 count=305 plug?1
	[53615.977050] [kworker/u66:18:1490] bio start,size:45585504,8 count=306 plug?1
	[53615.977053] [kworker/u66:18:1490] bio start,size:45585512,8 count=307 plug?1
	[53615.977056] [kworker/u66:18:1490] bio start,size:45585520,8 count=308 plug?1
	[53615.977058] [kworker/u66:18:1490] bio start,size:45585528,8 count=309 plug?1

2, Run 32 threads by command "stress -c 32 &"
	[50586.290521] [kworker/u66:6:32351] bio start,size:45806496,8 count=0 plug?1
	[50586.290526] [kworker/u66:6:32351] bio start,size:45806504,8 count=1 plug?1
	[50586.290529] [kworker/u66:6:32351] bio start,size:45806512,8 count=2 plug?1
	[50586.290531] [kworker/u66:6:32351] bio start,size:45806520,8 count=3 plug?1
	[50586.290533] [kworker/u66:6:32351] bio start,size:45806528,8 count=4 plug?1
	[50586.290535] [kworker/u66:6:32351] bio start,size:45806536,8 count=5 plug?1
	... ...
	[50586.299640] [kworker/u66:5:32350] bio start,size:45808576,8 count=252 plug?1
	[50586.299643] [kworker/u66:5:32350] bio start,size:45808584,8 count=253 plug?1
	[50586.299646] [kworker/u66:5:32350] bio start,size:45808592,8 count=254 plug?1
	[50586.299649] [kworker/u66:5:32350] bio start,size:45808600,8 count=255 plug?1
	[50586.299652] [kworker/u66:5:32350] bio start,size:45808608,8 count=256 plug?1
	[50586.299663] [kworker/u66:5:32350] bio start,size:45808616,8 count=257 plug?1
	[50586.299665] [kworker/u66:5:32350] bio start,size:45808624,8 count=258 plug?1
	[50586.299668] [kworker/u66:5:32350] bio start,size:45808632,8 count=259 plug?1

3, Don't run thread by stress
	[50861.355246] [kworker/u66:19:32376] bio start,size:13544504,8 count=0 plug?0
	[50861.355288] [kworker/u66:19:32376] bio start,size:13544512,8 count=0 plug?0
	[50861.355322] [kworker/u66:19:32376] bio start,size:13544520,8 count=0 plug?0
	[50861.355353] [kworker/u66:19:32376] bio start,size:13544528,8 count=0 plug?0
	[50861.355392] [kworker/u66:19:32376] bio start,size:13544536,8 count=0 plug?0
	[50861.355431] [kworker/u66:19:32376] bio start,size:13544544,8 count=0 plug?0
	[50861.355468] [kworker/u66:19:32376] bio start,size:13544552,8 count=0 plug?0
	[50861.355499] [kworker/u66:19:32376] bio start,size:13544560,8 count=0 plug?0
	[50861.355532] [kworker/u66:19:32376] bio start,size:13544568,8 count=0 plug?0
	[50861.355575] [kworker/u66:19:32376] bio start,size:13544576,8 count=0 plug?0
	[50861.355618] [kworker/u66:19:32376] bio start,size:13544584,8 count=0 plug?0
	[50861.355659] [kworker/u66:19:32376] bio start,size:13544592,8 count=0 plug?0
	[50861.355740] [kworker/u66:0:32346] bio start,size:13544600,8 count=0 plug?1
	[50861.355748] [kworker/u66:0:32346] bio start,size:13544608,8 count=1 plug?1
	[50861.355962] [kworker/u66:2:32347] bio start,size:13544616,8 count=0 plug?0
	[50861.356272] [kworker/u66:7:31962] bio start,size:13544624,8 count=0 plug?0
	[50861.356446] [kworker/u66:7:31962] bio start,size:13544632,8 count=0 plug?0
	[50861.356567] [kworker/u66:7:31962] bio start,size:13544640,8 count=0 plug?0
	[50861.356707] [kworker/u66:19:32376] bio start,size:13544648,8 count=0 plug?0
	[50861.356748] [kworker/u66:15:32355] bio start,size:13544656,8 count=0 plug?0
	[50861.356825] [kworker/u66:17:31970] bio start,size:13544664,8 count=0 plug?0

Analysis of above 3 test results with different system load:
>From above test, we can see more and more continuous bios can be plugged
with system load increasing. When run "stress -c 64 &", 310 continuous
bios are plugged; When run "stress -c 32 &", 260 continuous bios are
plugged; When don't run stress, at most only 2 continuous bios are
plugged, in most cases, bio_list only contains one single bio.

How to explain above phenomenon:
We know, in submit_bio(), if the bio is a REQ_CGROUP_PUNT io, it will
queue a work to workqueue blkcg_punt_bio_wq. But when the workqueue is
scheduled, it depends on the system load.  When system load is low, the
workqueue will be quickly scheduled, and the bio in bio_list will be
quickly processed in blkg_async_bio_workfn(), so there is less chance
that the same io submit thread can add multiple continuous bios to
bio_list before workqueue is scheduled to run. The analysis aligned with
above test "3".
When system load is high, there is some delay before the workqueue can
be scheduled to run, the higher the system load the greater the delay.
So there is more chance that the same io submit thread can add multiple
continuous bios to bio_list. Then when the workqueue is scheduled to run,
there are more continuous bios in bio_list, which will be processed in
blkg_async_bio_workfn(). The analysis aligned with above test "1" and "2".

According to test, we can get io performance improved with the patch,
especially when system load is higher. Another optimazition is to use
the plug only when bio_list contains at least 2 bios.
Signed-off-by: NXianting Tian <tian.xianting@h3c.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the now unused check_disk_change helper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Both callers have a valid CD struture available, so rely on that instead
of getting another reference.  Also move the function to avoid a forward
declaration.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_change instead of check_disk_change and
call sr_block_revalidate_disk manually.  Also add an explicit call to
sr_block_revalidate_disk just before disk_add() to ensure we always
read check for a ready unit and read the TOC and then stop wiring up
->revalidate_disk.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_change instead of check_disk_change and
call sd_revalidate_disk manually.  As sd also calls sd_revalidate_disk
manually during probe and open, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The md driver does not have a ->revalidate_disk method, so it can just
use bdev_check_media_change without any additional changes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Acked-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

ide-gd is only using the disk events mechanism to be able to force an
invalidation and partition scan on opening removable media.  Just open
code the logic without invoving the block layer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Just merge the trivial function into its only caller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_changed instead of check_disk_change and
call idecd_revalidate_disk manually.  Given that idecd_revalidate_disk
only re-reads the TOC, and we already do the same at probe time, the
extra call into ->revalidate_disk from bdev_disk_changed is not required
either, so stop wiring up the method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The Sega GD-ROM driver does not have a ->revalidate_disk method, so it
can just use bdev_check_media_change without any additional changes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The pcd driver does not have a ->revalidate_disk method, so it can just
use bdev_check_media_change without any additional changes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pass a struct ace_device to ace_revalidate_disk, move the media changed
check into the one caller that needs it, and give the routine a better
name.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_change instead of check_disk_change and
call ace_revalidate_disk manually.  Given that ace_revalidate_disk only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_changed instead of check_disk_change and
call floppy_revalidate manually.  Given that floppy_revalidate only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

floppy_revalidate mostly duplicates work already done in floppy_open
despite only beeing called from floppy_open.  Remove the function and
just clear the ->ejected flag directly under the right condition.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_change instead of check_disk_change and
call floppy_revalidate manually.  Given that floppy_revalidate only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_change instead of check_disk_change and
call floppy_revalidate manually.  Given that floppy_revalidate only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to use bdev_check_media_change instead of check_disk_change and
call floppy_revalidate manually.  Given that floppy_revalidate only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The Amiga floppy driver does not have a ->revalidate_disk method, so it
can just use bdev_check_media_change without any additional changes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Like check_disk_changed, except that it does not call ->revalidate_disk
but leaves that to the caller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch to the naming used by the other entries so that we can use the
QUEUE_RW_ENTRY helper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add two helpers macros to avoid boilerplate code for the queue sysfs
entries.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The sparse tool complains as follows:

kernel/trace/blktrace.c:796:5: warning:
 symbol 'blk_trace_bio_get_cgid' was not declared. Should it be static?

This function is not used outside of blktrace.c, so this commit
marks it static.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWang Hai <wanghai38@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>