For architecture like ia64, the switch stack structure is fairly large
(currently 528 bytes).  For context switch intensive application, we found
that significant amount of cache misses occurs in switch_to() function.
The following patch adds a hook in the schedule() function to prefetch
switch stack structure as soon as 'next' task is determined.  This allows
maximum overlap in prefetch cache lines for that structure.
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Race is as follows. Process A forks process B, both being part of the same
session. Then, A calls disassociate_ctty while B forks C:

A				B
====				====
				fork()
				  copy_signal()
dissasociate_ctty()		....
				  attach_pid(p, PIDTYPE_SID, p->signal->session);

Now, C can have current->signal->tty pointing to a freed tty structure, as
it hasn't yet been added to the session group (to have its controlling tty
cleared on the diassociate_ctty() call).

This has shown up as an oops but could be even more serious.  I haven't
tried to create a test case, but a customer has verified that the patch
below resolves the issue, which was occuring quite frequently.  I'll try
and post the test case if i can.

The patch simply checks for a NULL tty *after* it has been attached to the
proper session group and clears it as necessary.  Alternatively, we could
simply do the tty assignment after the the process is added to the proper
session group.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch for old autofs (version 3) cleans dentries which are not putted
after killing the automount daemon (it's analogue of recent patch for
autofs4).
Signed-off-by: NAlexander Krizhanovsky <klx@yandex.ru>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some people use 66-cells braille devices for reading the console, and hence
would like to reduce the width of the screen by using:

stty cols 66

However, the vga text console doesn't behave correctly: the 14 first
characters of the second line are put on the right of the first line and so
forth.

Here is a patch to correct that.  It corrects the disp_end and offset
registers of the vga board on console resize and console switch.

On usual screens, you then correctly get a right and/or bottom blank
margin.  On some laptop panels, the output is resized so that text actually
gets magnified, which can be great for some people (see
http://dept-info.labri.fr/~thibault/ls.jpg ).
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The idea of this patch is to lock both sides of a ptmx/pty pair during line
discipline changing.  This is needed to ensure that say a poll on one side of
the pty doesn't occur while the line discipline is actively being changed.
This resulted in an oops reported on lkml, see:

	http://marc.theaimsgroup.com/?l=linux-kernel&m=111342171410005&w=2

A 'hacky' approach was previously implmemented which served to eliminate the
poll vs.  line discipline changing race.  However, this patch takes a more
general approach to the issue.  The patch only adds locking on a less often
used path, the line-discipline changing path, as opposed to locking the
ptmx/pty pair on read/write/poll paths.

The patch below, takes both ldisc locks in either order b/c the locks are both
taken under the same spinlock().  I thought about locking the ptmx/pty
separately, such as master always first but that introduces a 3 way deadlock.
For example, process 1 does a blocking read on the slave side.  Then, process
2 does an ldisc change on the slave side, which acquires the master ldisc lock
but not the slave's.  Finally, process 3 does a write which blocks on the
process 2's ldisc reference.

This patch does introduce some changes in semantics.  For example, a line
discipline change on side 'a' of a ptmx/pty pair, will now wait for a
read/write to complete on the other side, or side 'b'.  The current behavior
is to simply wait for any read/writes on only side 'a', not both sides 'a' and
'b'.  I think this behavior makes sense, but I wanted to point it out.

I've tested the patch with a bunch of read/write/poll while changing the line
discipline out from underneath.

This patch obviates the need for the above "hide the problem" patch.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/alpha/kernel/module.c:process_reloc_for_got(), which figures out how big
the .got section for a module should be, appears to be confusing r_offset (the
file offset that the relocation needs to be applied to) with r_addend (the
offset of the relocation's actual target address from the address of the
relocation's symbol).  Because of this, one .got entry is allocated for each
relocation instead of one each unique symbol/addend.

In the module I am working with, this causes the .got section to be almost 10
times larger than it needs to be (75544 bytes instead of 7608 bytes).  As the
.got is accessed with global-pointer-relative instructions, it needs to be
within the 64k gp "zone", and a 75544 byte .got clearly does not fit.  The
result of this is that relocation overflows are detected during module load
and the load is aborted.

Change struct got_entry/process_reloc_for_got to fix this.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

enforce_max_cpus nukes out cpu_present_map and cpu_possible_map making it
impossible to add new cpus in the system.  Since it doesnt provide any
additional value apart this call and reference is removed.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The use of non-shortcut version of routines breaking CPU hotplug.  The option
to select this via cmdline also is deleted with the physflat patch, hence
directly placing this code under CONFIG_HOTPLUG_CPU.

We dont want to use broadcast mode IPI's when hotplug is enabled.  This causes
bad effects in send IPI to a cpu that is offline which can trip when the cpu
is in the process of being kicked alive.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the same issue as ppc64 before, when returning to userland we
shouldn't re-compute the seccomp check or the task could be killed during
sigreturn when orig_eax is overwritten by the sigreturn syscall.  This was
found by Roland.

This was harmless from a security standpoint, but some i686 users reported
failures with auditing enabled system wide (some distro surprisingly makes
it the default) and I reproduced it too by keeping the whole workload under
strace -f.

Patch is tested and works for me under strace -f.

nobody@athlon:~/cpushare> strace -o /tmp/o -f python seccomp_test.py
make: Nothing to be done for `seccomp_test'.
Starting computing some malicious bytecode
init
load
start
stop
receive_data failure
kill
exit_code 0 signal 9
The malicious bytecode has been killed successfully by seccomp
Starting computing some safe bytecode
init
load
start
stop
174 counts
kill
exit_code 0 signal 0
The seccomp_test.py completed successfully, thank you for testing.

(akpm: collaterally cleaned up a bit of do_syscall_trace() too)
Signed-off-by: NAndrea Arcangeli <andrea@cpushare.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add TANBAC TB0287 support.
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch changes the usages of PVR_440* into strcmp's with the
cpu_name field, and removes the defines altogether.  The Ebony portion was
briefly tested long ago.  One benefit of moving from PVR-tests to string
tests in general is that not all CPUs can be on and be able to do this type
of comparison.

See http://patchwork.ozlabs.org/linuxppc/patch?id=1250 for the original
thread.
Signed-off-by: NTom Rini <trini@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modifies serial_init to get base baud rate from the rs_table entry instead
of BAUD_BASE.  This patch eliminates duplication between the
SERIAL_PORT_DFNS macro and BAUD_BASE.  Without the patch, if a port set the
baud rate in SERIAL_PORT_DFNS, but did not update BASE_BAUD, the BASE_BAUD
value would still be used.
Signed-off-by: NGrant Likely <grant.likely@gdcanada.com>
Signed-off-by: NTom Rini <trini@kernel.crashing.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In the flush and invalidate bootcode on PPC4xx we were accidentally using
the wrong instruction.  Use cmplw, which reads from a register like we
want.
Signed-off-by: NTom Rini <trini@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Subject says it all, there is no need to link perfmon.o on
sub-architectures other than CONFIG_E500.
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes the inode_post_link and inode_post_rename LSM hooks as
they are unused (and likely useless).
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes the inode_post_create/mkdir/mknod/symlink LSM hooks as
they are obsoleted by the new inode_init_security hook that enables atomic
inode security labeling.

If anyone sees any reason to retain these hooks, please speak now.  Also,
is anyone using the post_rename/link hooks; if not, those could also be
removed.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch modifies tmpfs to call the inode_init_security LSM hook to set
up the incore inode security state for new inodes before the inode becomes
accessible via the dcache.

As there is no underlying storage of security xattrs in this case, it is
not necessary for the hook to return the (name, value, len) triple to the
tmpfs code, so this patch also modifies the SELinux hook function to
correctly handle the case where the (name, value, len) pointers are NULL.

The hook call is needed in tmpfs in order to support proper security
labeling of tmpfs inodes (e.g.  for udev with tmpfs /dev in Fedora).  With
this change in place, we should then be able to remove the
security_inode_post_create/mkdir/...  hooks safely.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch modifies ext3 to call the inode_init_security LSM hook to obtain
the security attribute for a newly created inode and to set the resulting
attribute on the new inode as part of the same transaction.  This parallels
the existing processing for setting ACLs on newly created inodes.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch modifies ext2 to call the inode_init_security LSM hook to obtain
the security attribute for a newly created inode and to set the resulting
attribute on the new inode.  This parallels the existing processing for
setting ACLs on newly created inodes.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch set enables atomic security labeling of newly created
inodes by altering the fs code to invoke a new LSM hook to obtain the security
attribute to apply to a newly created inode and to set up the incore inode
security state during the inode creation transaction.  This parallels the
existing processing for setting ACLs on newly created inodes.  Otherwise, it
is possible for new inodes to be accessed by another thread via the dcache
prior to complete security setup (presently handled by the
post_create/mkdir/...  LSM hooks in the VFS) and a newly created inode may be
left unlabeled on the disk in the event of a crash.  SELinux presently works
around the issue by ensuring that the incore inode security label is
initialized to a special SID that is inaccessible to unprivileged processes
(in accordance with policy), thereby preventing inappropriate access but
potentially causing false denials on legitimate accesses.  A simple test
program demonstrates such false denials on SELinux, and the patch solves the
problem.  Similar such false denials have been encountered in real
applications.

This patch defines a new inode_init_security LSM hook to obtain the security
attribute to apply to a newly created inode and to set up the incore inode
security state for it, and adds a corresponding hook function implementation
to SELinux.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Support for the new RBHMA4500 eval board for the TX4938.  General update
from the 8250 ancestor of this driver.  Replace use of deprecated
interfaces.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update the file systems in fs/ implementing a delete_inode() callback to
call truncate_inode_pages().  One implementation note: In developing this
patch I put the calls to truncate_inode_pages() at the very top of those
filesystems delete_inode() callbacks in order to retain the previous
behavior.  I'm guessing that some of those could probably be optimized.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow file systems supporting ->delete_inode() to call
truncate_inode_pages() on their own.  OCFS2 wants this so it can query the
cluster before making a final decision on whether to wipe an inode from
disk or not.  In some corner cases an inode marked on the local node via
voting may not actually get orphaned.  A good example is node death before
the transaction moving the inode to the orphan dir commits to the journal.
Without this patch, the truncate_inode_pages() call in
generic_delete_inode() would discard valid data for such inodes.

During earlier discussion in the 2.6.13 merge plan thread, Christoph
Hellwig indicated that other file systems might also find this useful.

IMHO, the best solution would be to just allow ->drop_inode() to do the
cluster query but it seems that would require a substantial reworking of
that section of the code.  Assuming it is safe to call write_inode_now() in
ocfs2_delete_inode() for those inodes which won't actually get wiped, this
solution should get us by for now.

Trivial testing of this patch (and a related OCFS2 update) has shown this
to avoid the corruption I'm seeing.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Looks like the help comment for MPC834x got merged incorrectly.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a typo involving CONFIG_ACPI_SRAT.
Signed-off-by: NMagnus Damm <magnus@valinux.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An oversight.  We don't want to carry the IO scheduler's "we hold exclusive fs
resources" hint over to the child across fork().
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the weird and apparently unnecessary logic in MP_processor_info() which
assumes that the BSP is the first one to run MP_processor_info().  On one of
my boxes that isn't true and cpu_possible_map gets the wrong value.

Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Cc: Alexander Nyberg <alexn@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This makes ACPI_BLACKLIST_YEAR be consistently defined when ACPI is
enabled, regardless of whether we're on x86 or not, and thus avoids
bogus -Wundef warnings on ia64.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The legacy PIC's name is "i8259".
Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Passes -m64 to sparse on uml/amd64, tells sparse to stay out of
USER_OBJS.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removed gratuitous includes of asm/serial.h in synklinkmp and ip2main.
Allows to remove the rest of "broken on sparc32" in drivers/char - this
stuff doesn't break the build anymore.  Since it got zero testing, it almost
certainly won't work there, though...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

<qualifier> void * is not the same as void <qualifier> *...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Previous INTx cleanup patch had a bug that was not caught.  I found
this last night during testing and can confirm that it is now 100%
working.
Signed-off-by: NBrett Russ <russb@emc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The pciconfig_iobase, pciconfig_read and pciconfig_write system calls
were only implemented for 32-bit processes; for 64-bit processes they
returned an ENOSYS error.  This allows them to be used by 64-bit
processes as well.  The X server uses pciconfig_iobase at least, and
this change is necessary to allow a 64-bit X server to work on my G5.
Signed-off-by: NPaul Mackerras <paulus@samba.org>