This patch changes mtk_aes_handle_queue() to make it more generic.
The function argument is now a pointer to struct crypto_async_request,
which is the common base of struct ablkcipher_request and
struct aead_request.

Also this patch introduces struct mtk_aes_base_ctx which will be the
common base of all the transformation contexts.

Hence the very same queue will be used to manage both block cipher and
AEAD requests (such as gcm and authenc implemented in further patches).
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes mtk_aes_xmit() data transfer bug.

The original function uses the same loop and ring->pos
to handle both command and result descriptors. But this
produces incomplete results when src.sg_len != dst.sg_len.

To solve the problem, we splits the descriptors into different
loops and uses cmd_pos and res_pos to record them respectively.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch moves hardware control block members from
mtk_*_rec to transformation context and refines related
definition. This makes operational context to manage its
own control information easily for each DMA transfer.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

A lot of asm-optimized routines in arch/x86/crypto/ keep its
constants in .data. This is wrong, they should be on .rodata.

Mnay of these constants are the same in different modules.
For example, 128-bit shuffle mask 0x000102030405060708090A0B0C0D0E0F
exists in at least half a dozen places.

There is a way to let linker merge them and use just one copy.
The rules are as follows: mergeable objects of different sizes
should not share sections. You can't put them all in one .rodata
section, they will lose "mergeability".

GCC puts its mergeable constants in ".rodata.cstSIZE" sections,
or ".rodata.cstSIZE.<object_name>" if -fdata-sections is used.
This patch does the same:

	.section .rodata.cst16.SHUF_MASK, "aM", @progbits, 16

It is important that all data in such section consists of
16-byte elements, not larger ones, and there are no implicit
use of one element from another.

When this is not the case, use non-mergeable section:

	.section .rodata[.VAR_NAME], "a", @progbits

This reduces .data by ~15 kbytes:

    text    data     bss     dec      hex filename
11097415 2705840 2630712 16433967  fac32f vmlinux-prev.o
11112095 2690672 2630712 16433479  fac147 vmlinux.o

Merged objects are visible in System.map:

ffffffff81a28810 r POLY
ffffffff81a28810 r POLY
ffffffff81a28820 r TWOONE
ffffffff81a28820 r TWOONE
ffffffff81a28830 r PSHUFFLE_BYTE_FLIP_MASK <- merged regardless of
ffffffff81a28830 r SHUF_MASK   <------------- the name difference
ffffffff81a28830 r SHUF_MASK
ffffffff81a28830 r SHUF_MASK
..
ffffffff81a28d00 r K512 <- merged three identical 640-byte tables
ffffffff81a28d00 r K512
ffffffff81a28d00 r K512

Use of object names in section name suffixes is not strictly necessary,
but might help if someday link stage will use garbage collection
to eliminate unused sections (ld --gc-sections).
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Josh Poimboeuf <jpoimboe@redhat.com>
CC: Xiaodong Liu <xiaodong.liu@intel.com>
CC: Megha Dey <megha.dey@intel.com>
CC: linux-crypto@vger.kernel.org
CC: x86@kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

%progbits form is used on ARM (where @ is a comment char).

x86 consistently uses @progbits everywhere else.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Josh Poimboeuf <jpoimboe@redhat.com>
CC: Xiaodong Liu <xiaodong.liu@intel.com>
CC: Megha Dey <megha.dey@intel.com>
CC: George Spelvin <linux@horizon.com>
CC: linux-crypto@vger.kernel.org
CC: x86@kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The GNU assembler for ARM version 2.22 or older fails to infer the
element size from the vmov instructions, and aborts the build in
the following way;

.../aes-neonbs-core.S: Assembler messages:
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1h[1],r10'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1h[0],r9'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1l[1],r8'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1l[0],r7'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2h[1],r10'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2h[0],r9'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2l[1],r8'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2l[0],r7'

Fix this by setting the element size explicitly, by replacing vmov with
vmov.32.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

tcrypt is very tight-lipped when it succeeds, but a bit more feedback
would be useful when developing or debugging crypto drivers, especially
since even a successful run ends with the module failing to insert. Add
a couple of debug prints, which can be enabled with dynamic debug:

Before:

 # insmod tcrypt.ko mode=10
 insmod: can't insert 'tcrypt.ko': Resource temporarily unavailable

After:

 # insmod tcrypt.ko mode=10 dyndbg
 tcrypt: testing ecb(aes)
 tcrypt: testing cbc(aes)
 tcrypt: testing lrw(aes)
 tcrypt: testing xts(aes)
 tcrypt: testing ctr(aes)
 tcrypt: testing rfc3686(ctr(aes))
 tcrypt: all tests passed
 insmod: can't insert 'tcrypt.ko': Resource temporarily unavailable
Signed-off-by: NRabin Vincent <rabinv@axis.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The fourth argument of dma_map_sg() and dma_unmap_sg() is an item of
dma_data_direction enum. Function img_hash_xmit_dma() wrongly used
DMA_MEM_TO_DEV, which is an item of dma_transfer_direction enum.

Replace DMA_MEM_TO_DEV (which value is 1) with DMA_TO_DEVICE (which
value is fortunately also 1) when calling dma_map_sg() and
dma_unmap_sg().
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some hardware accelerators (like intel aesni or the s390
cpacf functions) have lower priorities than virtio
crypto, and those drivers are faster than the same in
the host via virtio. So let's lower the priority of
virtio-crypto's algorithm, make it's higher than software
implementations but lower than the hardware ones.
Suggested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ARMv8-M architecture introduces 'tt' and 'ttt' instructions,
which means we can no longer use 'tt' as a register alias on recent
versions of binutils for ARM. So replace the alias with 'ttab'.

Fixes: 81edb426 ("crypto: arm/aes - replace scalar AES cipher")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add the new register layout constants and the requisite logic
for using them.
Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since we're going to need to keep track of more than just one
attribute of the hardware, we'll change the use of the data field
from the match struct from a single flag to a struct pointer.
This patch adds the struct template and initial descriptions.
Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the self-test fails, it probably won't actually suddenly
start working.  Currently, this causes an endless spew of
error messages on the console and in the logs, so this patch
adds a limiter to the test.
Reported-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes the following sparse warning:

drivers/crypto/mediatek/mtk-platform.c:585:27: warning:
 symbol 'of_crypto_id' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When working on AES in CCM mode for ARM, my code passed the internal
tcrypt test before I had even bothered to implement the AES-192 and
AES-256 code paths, which is strange because the tcrypt does contain
AES-192 and AES-256 test vectors for CCM.

As it turned out, the define AES_CCM_ENC_TEST_VECTORS was out of sync
with the actual number of test vectors, causing only the AES-128 ones
to be executed.

So get rid of the defines, and wrap the test vector references in a
macro that calculates the number of vectors automatically.

The following test vector counts were out of sync with the respective
defines:

    BF_CTR_ENC_TEST_VECTORS          2 ->  3
    BF_CTR_DEC_TEST_VECTORS          2 ->  3
    TF_CTR_ENC_TEST_VECTORS          2 ->  3
    TF_CTR_DEC_TEST_VECTORS          2 ->  3
    SERPENT_CTR_ENC_TEST_VECTORS     2 ->  3
    SERPENT_CTR_DEC_TEST_VECTORS     2 ->  3
    AES_CCM_ENC_TEST_VECTORS         8 -> 14
    AES_CCM_DEC_TEST_VECTORS         7 -> 17
    AES_CCM_4309_ENC_TEST_VECTORS    7 -> 23
    AES_CCM_4309_DEC_TEST_VECTORS   10 -> 23
    CAMELLIA_CTR_ENC_TEST_VECTORS    2 ->  3
    CAMELLIA_CTR_DEC_TEST_VECTORS    2 ->  3
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This replaces the unwieldy generated implementation of bit-sliced AES
in CBC/CTR/XTS modes that originated in the OpenSSL project with a
new version that is heavily based on the OpenSSL implementation, but
has a number of advantages over the old version:
- it does not rely on the scalar AES cipher that also originated in the
  OpenSSL project and contains redundant lookup tables and key schedule
  generation routines (which we already have in crypto/aes_generic.)
- it uses the same expanded key schedule for encryption and decryption,
  reducing the size of the per-key data structure by 1696 bytes
- it adds an implementation of AES in ECB mode, which can be wrapped by
  other generic chaining mode implementations
- it moves the handling of corner cases that are non critical to performance
  to the glue layer written in C
- it was written directly in assembler rather than generated from a Perl
  script
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is a reimplementation of the NEON version of the bit-sliced AES
algorithm. This code is heavily based on Andy Polyakov's OpenSSL version
for ARM, which is also available in the kernel. This is an alternative for
the existing NEON implementation for arm64 authored by me, which suffers
from poor performance due to its reliance on the pathologically slow four
register variant of the tbl/tbx NEON instruction.

This version is about ~30% (*) faster than the generic C code, but only in
cases where the input can be 8x interleaved (this is a fundamental property
of bit slicing). For this reason, only the chaining modes ECB, XTS and CTR
are implemented. (The significance of ECB is that it could potentially be
used by other chaining modes)

* Measured on Cortex-A57. Note that this is still an order of magnitude
  slower than the implementations that use the dedicated AES instructions
  introduced in ARMv8, but those are part of an optional extension, and so
  it is good to have a fallback.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This replaces the scalar AES cipher that originates in the OpenSSL project
with a new implementation that is ~15% (*) faster (on modern cores), and
reuses the lookup tables and the key schedule generation routines from the
generic C implementation (which is usually compiled in anyway due to
networking and other subsystems depending on it).

Note that the bit sliced NEON code for AES still depends on the scalar cipher
that this patch replaces, so it is not removed entirely yet.

* On Cortex-A57, the performance increases from 17.0 to 14.9 cycles per byte
  for 128-bit keys.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This adds a scalar implementation of AES, based on the precomputed tables
that are exposed by the generic AES code. Since rotates are cheap on arm64,
this implementation only uses the 4 core tables (of 1 KB each), and avoids
the prerotated ones, reducing the D-cache footprint by 75%.

On Cortex-A57, this code manages 13.0 cycles per byte, which is ~34% faster
than the generic C code. (Note that this is still >13x slower than the code
that uses the optional ARMv8 Crypto Extensions, which manages <1 cycles per
byte.)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In addition to wrapping the AES-CTR cipher into the async SIMD wrapper,
which exposes it as an async skcipher that defers processing to process
context, expose our AES-CTR implementation directly as a synchronous cipher
as well, but with a lower priority.

This makes the AES-CTR transform usable in places where synchronous
transforms are required, such as the MAC802.11 encryption code, which
executes in sotfirq context, where SIMD processing is allowed on arm64.
Users of the async transform will keep the existing behavior.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is a straight port to ARM/NEON of the x86 SSE3 implementation
of the ChaCha20 stream cipher. It uses the new skcipher walksize
attribute to process the input in strides of 4x the block size.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is a straight port to arm64/NEON of the x86 SSE3 implementation
of the ChaCha20 stream cipher. It uses the new skcipher walksize
attribute to process the input in strides of 4x the block size.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

After I enabled COMPILE_TEST for non-ARM targets, I ran into these
warnings:

crypto/mediatek/mtk-aes.c: In function 'mtk_aes_info_map':
crypto/mediatek/mtk-aes.c:224:28: error: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Werror=format=]
   dev_err(cryp->dev, "dma %d bytes error\n", sizeof(*info));
crypto/mediatek/mtk-sha.c:344:28: error: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Werror=format=]
crypto/mediatek/mtk-sha.c:550:21: error: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'size_t {aka long unsigned int}' [-Werror=format=]

The correct format for size_t is %zu, so use that in all three
cases.

Fixes: 785e5c61 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Building the mediatek driver on an older ARM architecture results in a
harmless warning:

warning: (ARCH_OMAP2PLUS_TYPICAL && CRYPTO_DEV_MEDIATEK) selects NEON which has unmet direct dependencies (VFPv3 && CPU_V7)

We could add an explicit dependency on CPU_V7, but it seems nicer to
open up the build to additional configurations. This replaces the ARM
optimized algorithm selection with the normal one that all other drivers
use, and that in turn lets us relax the dependency on ARM and drop
a number of the unrelated 'select' statements.

Obviously a real user would still select those other optimized drivers
as a fallback, but as there is no strict dependency, we can leave that
up to the user.

Fixes: 785e5c61 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The kernel on x86-64 cannot use gcc attribute align to align to
a 16-byte boundary.  This patch reverts to the old way of aligning
it by hand.

Fixes: 9ae433bc ("crypto: chacha20 - convert generic and...")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>

There are some hashes (e.g. sha224) that have some internal trickery
to make sure that only the correct number of output bytes are
generated.  If something goes wrong, they could potentially overrun
the output buffer.

Make the test more robust by allocating only enough space for the
correct output size so that memory debugging will catch the error if
the output is overrun.

Tested by intentionally breaking sha224 to output all 256
internally-generated bits while running on KASAN.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In the case where keylen <= bs mtk_sha_setkey returns an uninitialized
return value in err.  Fix this by returning 0 instead of err.

Issue detected by static analysis with cppcheck.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The function is used to check either the platform device ID name or the OF
node's compatible (depending how the device was registered) to know which
device type was registered.

But the driver is for a DT-only platform and so there's no need for this
level of indirection since the devices can only be registered via OF.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This driver is only used in the picoxcell platform and this is DT-only.

So only a OF device ID table is needed and there's no need to have a
platform device ID table. This patch removes the unneeded table.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Driver only has runtime but no build time dependency with ARCH_PICOXCELL.
So it can be built for testing purposes if COMPILE_TEST option is enabled.

This is useful to have more build coverage and make sure that the driver
is not affected by changes that could cause build regressions.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Continuing from this commit: 52f5684c
("kernel: use macros from compiler.h instead of __attribute__((...))")

I submitted 4 total patches. They are part of task I've taken up to
increase compiler portability in the kernel. I've cleaned up the
subsystems under /kernel /mm /block and /security, this patch targets
/crypto.

There is <linux/compiler.h> which provides macros for various gcc specific
constructs. Eg: __weak for __attribute__((weak)). I've cleaned all
instances of gcc specific attributes with the right macros for the crypto
subsystem.

I had to make one additional change into compiler-gcc.h for the case when
one wants to use this: __attribute__((aligned) and not specify an alignment
factor. From the gcc docs, this will result in the largest alignment for
that data type on the target machine so I've named the macro
__aligned_largest. Please advise if another name is more appropriate.
Signed-off-by: NGideon Israel Dsouza <gidisrael@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

It's recommended to use kmemdup instead of kmalloc followed by memcpy.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merging 4.10-rc3 so that the cryptodev tree builds on ARM64.

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

Pull char/misc fixes from Greg KH:
 "Here are a few small char/misc driver fixes for 4.10-rc3.

  Two MEI driver fixes, and three NVMEM patches for reported issues, and
  a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
  been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hyper-v: Add myself as additional MAINTAINER
  nvmem: fix nvmem_cell_read() return type doc
  nvmem: imx-ocotp: Fix wrong register size
  nvmem: qfprom: Allow single byte accesses for read/write
  mei: move write cb to completion on credentials failures
  mei: bus: fix mei_cldev_enable KDoc

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and IIO driver fixes for 4.10-rc3.

  Most of these are minor IIO fixes of reported issues, along with one
  network driver fix to resolve an issue. And a MAINTAINERS update with
  a new mailing list. All of these, except the MAINTAINERS file update,
  have been in linux-next with no reported issues (the MAINTAINERS patch
  happened on Friday...)"

* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: add greybus subsystem mailing list
  staging: octeon: Call SET_NETDEV_DEV()
  iio: accel: st_accel: fix LIS3LV02 reading and scaling
  iio: common: st_sensors: fix channel data parsing
  iio: max44000: correct value in illuminance_integration_time_available
  iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  iio: bmi160: Fix time needed to sleep after command execution
  iio: 104-quad-8: Fix active level mismatch for the preset enable option
  iio: 104-quad-8: Fix off-by-one errors when addressing IOR
  iio: 104-quad-8: Fix index control configuration

Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.

Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:

  WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200
  CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3
  Call Trace:
     delete_node+0x1e4/0x200
     __radix_tree_delete_node+0xd/0x10
     shadow_lru_isolate+0xe6/0x220
     __list_lru_walk_one.isra.4+0x9b/0x190
     list_lru_walk_one+0x23/0x30
     scan_shadow_nodes+0x2e/0x40
     shrink_slab.part.44+0x23d/0x5d0
     shrink_node+0x22c/0x330
     kswapd+0x392/0x8f0

This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().

The problem is with 14b46879 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.

While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk.  If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.

Consider this tree, where the s are shadow entries:

       root->rnode
            |
       [0       n]
        |       |
     [s    ] [sssss]

Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:

       root->rnode
            |
       [0        ]
        |
    [s     ]

Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:

       root->rnode
            |
       [s        ]

The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.

  root->rnode
       |
       s

Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.

Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.

Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.

Fixes: 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking")
Reported-by: NDave Chinner <david@fromorbit.com>
Reported-by: NHugh Dickins <hughd@google.com>
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-and-tested-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Leech <cleech@redhat.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.

Commit 953c66c2 ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().

This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().

Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).

And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.

Fixes: 953c66c2 ("mm: THP page cache support for ppc64")
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>