Implement SYSFS_FLAG_REMOVED flag which currently is used only to
improve sanity check in sysfs_deactivate().  The flag will be used to
make directory entries reclamiable.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rename sysfs_dirent->s_type to s_flags, pack type into lower eight
bits and reserve the rest for flags.  sysfs_type() can used to access
the type.  All existing sd->s_type accesses are converted to use
sysfs_type().  While at it, type test is changed to equality test
instead of bit-and test where appropriate.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs_drop_dentry() used to go through sd->s_dentry and
sd->s_parent->s_dentry to access the inodes.  This is incorrect
because inode can be cached without dentry.

This patch makes sysfs_drop_dentry() access inodes using ilookup() on
sd->s_ino.  This is both correct and simpler.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix oops on x86_64 caused by the dereference of dir in
sysfs_drop_dentry() made before checking if dir is not NULL
(cf. http://marc.info/?l=linux-kernel&m=118151626704924&w=2).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make sysfs_dirent use singly linked list for its tree structure.
sysfs_link_sibling() and sysfs_unlink_sibling() functions are added to
handle simpler cases.  It adds some complexity and cpu cycle overhead
but reduced memory footprint is worthwhile on big machines.

This change reduces the sizeof sysfs_dirent from 104 to 88 on 64bit
and from 60 to 52 on 32bit.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make sysfs_dirent->s_active an atomic_t instead of rwsem.  This
reduces the size of sysfs_dirent from 136 to 104 on 64bit and from 76
to 60 on 32bit with lock debugging turned off.  With lock debugging
turned on the reduction is much larger.

s_active starts at zero and each active reference increments s_active.
Putting a reference decrements s_active.  Deactivation subtracts
SD_DEACTIVATED_BIAS which is currently INT_MIN and assumed to be small
enough to make s_active negative.  If s_active is negative,
sysfs_get() no longer grants new references.  Deactivation succeeds
immediately if there is no active user; otherwise, it waits using a
completion for the last put.

Due to the removal of lockdep tricks, this change makes things less
trickier in release_sysfs_dirent().  As all the complexity is
contained in three s_active functions, I think it's more readable this
way.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These functions are about to receive more complexity and doesn't
really need to be inlined in the first place.  Move them from
fs/sysfs/sysfs.h to fs/sysfs/dir.c.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The root sysfs_dirent didn't point to the root dentry fix it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

After dentry is reclaimed, sysfs always used to allocate new dentry
and inode if the file is accessed again.  This causes problem with
operations which only pin the inode.  For example, if inotify watch is
added to a sysfs file and the dentry for the file is reclaimed, the
next update event creates new dentry and new inode making the inotify
watch miss all the events from there on.

This patch fixes it by using iget_locked() instead of new_inode().
sysfs_new_inode() is renamed to sysfs_get_inode() and inode is
initialized iff the inode is newly allocated.  sysfs_instantiate() is
responsible for unlocking new inodes.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reorganize/clean up sysfs_new_inode() and sysfs_create().

* sysfs_init_inode() is separated out from sysfs_new_inode() and is
  responsible for basic initialization.
* sysfs_instantiate() replaces the last step of sysfs_create() and is
  responsible for dentry instantitaion.
* type-specific initialization is moved out to the callers.
* mode is specified only once when creating a sysfs_dirent.
* spurious list_del_init(&sd->s_sibling) dropped from create_dir()

This change is to

* prepare for inode allocation fix.
* separate alloc and init code for synchronization update.
* make dentry/inode initialization more flexible for later changes.

This patch doesn't introduce visible behavior change.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Parent reference wasn't properly transferred during rename and move.
Fix it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs_alloc_ino() isn't used out side of fs/sysfs/dir.c.  Make it
static.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs is now completely out of driver/module lifetime game.  After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners.  Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.

This patch kills now unnecessary attribute->owner.  Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.

For more info regarding lifetime rule cleanup, please read the
following message.

  http://article.gmane.org/gmane.linux.kernel/510293

(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch reimplements sysfs_drop_dentry() such that remove_dir() can
use it to drop dentry instead of using a separate mechanism.  With
this change, making directories reclaimable is much easier.

This patch used to contain fixes for two race conditions around
sd->s_dentry but that part has been separated out and included into
mainline early as commit 6aa054aa and
dd14cbc9.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Consolidate sd <-> dentry association into sysfs_attach_dentry() and
call it after dentry and inode are properly set up.  This is in
preparation of sysfs_drop_dentry() updates.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that sysfs_dirent can be disconnected from kobject on deletion,
there is no need to orphan each attribute files.  All [bin_]attribute
nodes are automatically orphaned when the parent node is deleted.
Kill attribute file orphaning.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs: implement sysfs_dirent active reference and immediate disconnect

Opening a sysfs node references its associated kobject, so userland
can arbitrarily prolong lifetime of a kobject which complicates
lifetime rules in drivers.  This patch implements active reference and
makes the association between kobject and sysfs immediately breakable.

Now each sysfs_dirent has two reference counts - s_count and s_active.
s_count is a regular reference count which guarantees that the
containing sysfs_dirent is accessible.  As long as s_count reference
is held, all sysfs internal fields in sysfs_dirent are accessible
including s_parent and s_name.

The newly added s_active is active reference count.  This is acquired
by invoking sysfs_get_active() and it's the caller's responsibility to
ensure sysfs_dirent itself is accessible (should be holding s_count
one way or the other).  Dereferencing sysfs_dirent to access objects
out of sysfs proper requires active reference.  This includes access
to the associated kobjects, attributes and ops.

The active references can be drained and denied by calling
sysfs_deactivate().  All active sysfs_dirents must be deactivated
after deletion but before the default reference is dropped.  This
enables immediate disconnect of sysfs nodes.  Once a sysfs_dirent is
deleted, it won't access any entity external to sysfs proper.

Because attr/bin_attr ops access both the node itself and its parent
for kobject, they need to hold active references to both.
sysfs_get/put_active_two() helpers are provided to help grabbing both
references.  Parent's is acquired first and released last.

Unlike other operations, mmapped area lingers on after mmap() is
finished and the module implement implementing it and kobj need to
stay referenced till all the mapped pages are gone.  This is
accomplished by holding one set of active references to the bin_attr
and its parent if there have been any mmap during lifetime of an
openfile.  The references are dropped when the openfile is released.

This change makes sysfs lifetime rules independent from both kobject's
and module's.  It not only fixes several race conditions caused by
sysfs not holding onto the proper module when referencing kobject, but
also helps fixing and simplifying lifetime management in driver model
and drivers by taking sysfs out of the equation.

Please read the following message for more info.

  http://article.gmane.org/gmane.linux.kernel/510293Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implement bin_buffer which contains a mutex and pointer to PAGE_SIZE
buffer to properly synchronize accesses to per-openfile buffer and
prepare for immediate-kobj-disconnect.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs symlink is implemented by referencing dentry and kobject from
sysfs_dirent - symlink entry references kobject, dentry is used to
walk the tree.  This complicates object lifetimes rules and is
dangerous - for example, there is no way to tell to which module the
target of a symlink belongs and referencing that kobject can make it
linger after the module is gone.

This patch reimplements symlink using only sysfs_dirent tree.  sd for
a symlink points and holds reference to the target sysfs_dirent and
all walking is done using sysfs_dirent tree.  Simpler and safer.

Please read the following message for more info.

  http://article.gmane.org/gmane.linux.kernel/510293Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

kobj->dentry can go away anytime unless the user controls when the
associated sysfs node is deleted.  This patch implements
kobj_sysfs_assoc_lock which protects kobj->dentry.  This will be used
to maintain kobj based API when converting sysfs to use sysfs_dirent
tree instead of dentry/kobject.

Note that this lock belongs to kobject/driver-model not sysfs.  Once
sysfs is converted to not use kobject in its interface, this can be
removed from sysfs.

This is in preparation of object reference simplification.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make sd->s_element a union of sysfs_elem_{dir|symlink|attr|bin_attr}
and rename it to s_elem.  This is to achieve...

* some level of type checking : changing symlink to point to
  sysfs_dirent instead of kobject is much safer and less painful now.
* easier / standardized dereferencing
* allow sysfs_elem_* to contain more than one entry

Where possible, pointer is obtained by directly deferencing from sd
instead of going through other entities.  This reduces dependencies to
dentry, inode and kobject.  to_attr() and to_bin_attr() are unused now
and removed.

This is in preparation of object reference simplification.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add s_name to sysfs_dirent.  This is to further reduce dependency to
the associated dentry.  Name is copied for directories and symlinks
but not for attributes.

Where possible, name dereferences are converted to use sd->s_name.
sysfs_symlink->link_name and sysfs_get_name() are unused now and
removed.

This change allows symlink to be implemented using sysfs_dirent tree
proper, which is the last remaining dentry-dependent sysfs walk.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add sysfs_dirent->s_parent.  With this patch, each sd points to and
holds a reference to its parent.  This allows walking sysfs tree
without referencing sd->s_dentry which can go away anytime if the user
doesn't control when it's deleted.

sd->s_parent is initialized and parent is referenced in
sysfs_attach_dirent().  Reference to parent is released when the sd is
released, so as long as reference to a sd is held, s_parent can be
followed.

dentry walk in sysfs_readdir() is convereted to s_parent walk.

This will be used to reimplement symlink such that it uses only
sysfs_dirent tree.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently there are four functions to create sysfs_dirent -
__sysfs_new_dirent(), sysfs_new_dirent(), __sysfs_make_dirent() and
sysfs_make_dirent().  Other than sysfs_make_dirent(), no function has
two users if calls to implement other functions are excluded.

This patch consolidates sysfs_dirent creation functions into the
following two.

* sysfs_new_dirent() : allocate and initialize
* sysfs_attach_dirent() : attach to sysfs_dirent hierarchy and/or
			  associate with dentry

This simplifies interface and gives callers more flexibility.  This is
in preparation of object reference simplification.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Error handling in sysfs_rename_dir() was broken.

* When lookup_one_len() fails, 0 is returned.

* If parent inode check fails, returns with inode mutex and rename
  rwsem held.

This patch fixes the above bugs and flattens error handling such that
it's more readable and easier to modify.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Flatten cleanup paths in sysfs_add_link() and create_dir() to improve
readability and ease further changes to these functions.  This is in
preparation of object reference simplification.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Error handling in fs/sysfs/bin.c:write() was wrong because size_t
count is used to receive return value from flush_write() which is
negative on failure.

This patch updates write() such that int variable is used instead.
read() is updated the same way for consistency.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make sysfs_put() ignore NULL sd instead of oopsing.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs used simple incrementing allocator which is not guaranteed to be
unique.  This patch makes sysfs use ida to give each sd a unique and
packed inode number.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There is no reason this function should be inlined and soon to follow
sysfs object reference simplification will make it heavier.  Move it
to dir.c.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implement debugfs_rename() to allow renaming files/directories in debugfs.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Many places in kernel use seq_file API to iterate over a regular list_head.
The code for such iteration is identical in all the places, so it's worth
introducing a common helpers.

This makes code about 300 lines smaller:

The first version of this patch made the helper functions static inline
in the seq_file.h header. This patch moves them to the fs/seq_file.c as
Andrew proposed. The vmlinux .text section sizes are as follows:

2.6.22-rc1-mm1:              0x001794d5
with the previous version:   0x00179505
with this patch:             0x00179135

The config file used was make allnoconfig with the "y" inclusion of all
the possible options to make the files modified by the patch compile plus
drivers I have on the test node.

This patch:

Many places in kernel use seq_file API to iterate over a regular list_head.
The code for such iteration is identical in all the places, so it's worth
introducing a common helpers.
Signed-off-by: NPavel Emelianov <xemul@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On Tue, 2007-07-10 at 10:06 +0100, Christoph Hellwig wrote:
> > -#define GFS2_LARGE_FH_SIZE 10
> > -
> > -struct gfs2_fh_obj {
> > -   struct gfs2_inum_host this;
> > -   u32 imode;
> > -};
> > +#define GFS2_LARGE_FH_SIZE 8
>
> Because gfs2_decode_fh only accepts file handles with GFS2_LARGE_FH_SIZE
> or GFS2_LARGE_FH_SIZE you don't accept filehandles sent out by and older
> gfs version anymore.  Stale filehandles because of a new kernel version
> are a big no-no, so please add back code to handle the old filehandles
> on the decode side.
>

This should fix that problem I think since its only relating to end of
the fh we can just ignore that field in order to accept the older
format.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wendy Cheng <wcheng@redhat.com>

CDL formated DASDs are now detected correctly even if no VOL1 label is
on the disk. This prevents possible loss of data.
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

As per Andrew Mortons request, here's a set of documentation for
the generic pipe_buf_operations hooks, the pipe, and pipe_buffer
structures.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The name 'pin' was badly chosen, it doesn't pin a pipe buffer
in the most commonly used sense in the kernel. So change the
name to 'confirm', after debating this issue with Hugh
Dickins a bit.

A good return from ->confirm() means that the buffer is really
there, and that the contents are good.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

There are now zero users of .sendfile() in the kernel, so kill
it from the file_operations structure and in do_sendfile().
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch removes xip_file_sendfile, the sendfile implementation for
xip without replacement. Those customers that use xip on s390 are not
using sendfile() as far as we know, and so far s390 is the only platform
this could potentially be used on so far.
Having sendfile is not a popular feature for execute in place file
systems, however we have a working implementation of splice_read() based
on fs/splice.c if anyone asks for it.
At this point in time, it does not seem preferable to merge
splice_read() for xip because it causes extra maintenence effort due to
code duplication and it requires struct page behind the xip memory
segment. We'd like to get rid of that in favor of supporting flash based
embedded platforms (Monta Vista work) soon.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Also add fs/splice.c as a kerneldoc target with a smaller blurb that
should be expanded to better explain the overview of splice.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

do_sendfile() prefers splice over sendfile, so it should not trigger
(directly, at least).
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>