This patch adds initial map for GPIO2 and GPIO3.
S5PV310/S5PC210 has separated GPIO1, GPIO2 and GPIO3.
Signed-off-by: NJongpill Lee <boyko.lee@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch updates MAX_COMBINER_NR from 39 to 40 because
S5PV310 need 39th combiner for including EINT16_31.
Signed-off-by: NJongpill Lee <boyko.lee@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds warning about changing EPLL rate to notice that other
driver that controls H/W, which is using EPLL, will has unknown effects
by this EPLL rate change.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds EPLL specific clock get_rate/set_rate operations
on S5PV210.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch fix wrong EPLL getting on setup clocks on S5PV210.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

S5P Samsung SoCs has a EPLL to support various PLL clock sources for other
H/W blocks. Until now, to control EPLL, each of SoCs make their own functions
in 'mach-s5pxxx/clock.c'. But some of functions, 'xxx_epll_get_rate()' and
'xxx_epll_enable()', are exactly same in all S5P SoCs, so this patch move
these duplicated codes to common EPLL functions that use platform wide.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds audio clocks(SCLK_AUDIO{0,1,2} and SCLK_AUDIO) to be
initial as a sysclk on boot-time.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch add SCLK_SPDIF clock to support source clock of S/PDIF
on S5PV210.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch add S/PDIF platform device to support S/PDIF PCM audio
on S5PV210.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch add SCLK_SPDIF clock to support source clock of S/PDIF
on S5PC100.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch modify SCLK_AUDIO{0,1,2} to be initial as sysclks
on boot-time.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch add S/PDIF platform device to support S/PDIF PCM audio
on S5PC100.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Since it's exported we should make sure we're using the prototype
others see.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Since it's exported we should make sure we're using the prototype
others see.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds ARCH_HAS_CPUFREQ in arch/arm/Kconfig for S5PV210,
and updates mach-s5pv210/Makefile for supporting build CPUFREQ driver.
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds CPUFREQ driver for supporting DFS(Dynamic Frequency Scaling).
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds some CMU(Clock Management Unit) registers for
supporting CPUFREQ and some drivers.
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds MOUT_DMC0 and SCLK_DMC0 for checking the dmc0 clock
in CPUFREQ driver.
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Current fout_apll has fixed rate value. So CPUFREQ driver gets
incorrect value when finding current CPU frequency. Because some
operation level need to change APLL.
Added get_rate function for fout_apll can give correct frequency
value when calling get_rate function.
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

S5PV310 and S5PC210 support more I2C devices than previous SoCs.
Add the device support code for them.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

S5PV310 and S5PC210 support total 8 (+ 1 dedicated for HDMI) I2C devices.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The name of the I2C2 and I2C3 interrupt should be IIC2 and IIC3
instead of CAN0 and CAN1.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes I2C2 and I2C3 interrupt name from IRQ_CANX to IRQ_IICX
according other SoCs' I2C interrupt naming rule.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Basically S5P SoCs use the Samsung common VA address mapping where
plat-samsung and use plat-s5p's mapping also. The later is a little
mess. So this patch cleans it up.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Camera devices use the I2C0 and Gyro uese the I2C1 on universal board.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fixes]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

OneNAND device support for Universal board.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fixes]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds clock types into platform data to support
external clock divider instead of internal clock divider.
It is defined that what kinds of clock type is used in machine.
Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds to change bus width and host capability of HSMMC,
when HSMMC is only configured with another value of bus width
and host capability from default one.
Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com>
Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds support HSMMC for S5PV310(SMDKV310) and
S5PC210(SMDKC210).
Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com>
Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds initialization HSMMC device information.
And HSMMC platform data like card detect, data bus width
and capability is configured.
Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com>
Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds support HSMMC for S5PV310 and S5PC210 and
setup for HSMMC host controller and also related GPIO.
At most 4 channel can be used at the same time.
A user can configure SDHCI data bus as 8bit or 4bit.
Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com>
Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch clean up the GPIO code and removes useless GPIO addresses.
It can be calculated with offset, the 'base' member of s3c_gpio_chip
is also initialized in the init function.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

When merged patches, missed IRQ_EINT_BIT() definition from commit ea31fd43
(ARM: S5PV210: Add Power Management Support). The IRQ_EINT_BIT() is used
in the Power Management operation (plat-samsung/pm.c).
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

When converting to use s3c_gpio_cfgpin_range() the function for the
IISv4 block appears to have been typoed as 4 (the keypad) rather than
5 as it should be.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes code setting special-function and no pull-up
to use the s3c_gpio_cfgrange_nopull() wrapper.
NOTE: This is for missed things from the previous patch.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes code setting special-function and no pull-up
to use the s3c_gpio_cfgrange_nopull() wrapper.
NOTE: This is for missed things from the previous patch.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes code setting special-function and no pull-up
to use the s3c_gpio_cfgrange_nopull() wrapper.
NOTE: This is for missed things from the previous patch.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Change code setting special-function and no pull-up to use
the s3c_gpio_cfgrange_nopull() wrapper.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Change code setting special-function and no pull-up to use
the s3c_gpio_cfgrange_nopull() wrapper.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>