...with a more straightforward switch().

Also fix a bug when NMI could be dropped on exit. Although this should
never happen in practice, since NMIs can only be injected, never triggered
internally by the guest like exceptions.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Bit 12 is undefined in any of the following cases:
 If the VM exit sets the valid bit in the IDT-vectoring information field.
 If the VM exit is due to a double fault.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Also remove bit 5-6 from rsvd_bits_mask per latest SDM.
Signed-off-by: NEddie Dong <Eddie.Dong@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The testing of feature is too early now, before vmcs_config complete initialization.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

And clean paranthes on returns.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove pointless conditional before kfree().
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

A pte that is shadowed when the guest EFER.NXE=1 is not valid when
EFER.NXE=0; if bit 63 is set, the pte should cause a fault, and since the
shadow EFER always has NX enabled, this won't happen.

Fix by using a different shadow page table for different EFER.NXE bits.  This
allows vcpus to run correctly with different values of EFER.NXE, and for
transitions on this bit to be handled correctly without requiring a full
flush.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Detect, indicate, and propagate page faults where reserved bits are set.
Take care to handle the different paging modes, each of which has different
sets of reserved bits.

[avi: fix pte reserved bits for efer.nxe=0]
Signed-off-by: NEddie Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently, the interrupt enable bit is cleared when in
the vmm.  This patch sets the bit and the external interrupts can
be dealt with when in the vmm.  This improves the I/O performance.
Signed-off-by: NYang Zhang <yang.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The original one is for the code before refactoring.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

EXIT_QUALIFICATION and GUEST_LINEAR_ADDRESS are natural width, not 64-bit.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If the hardware does not support flexpriority, zero the module parameter.
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking
if interrupt window is actually opened.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently timer events are processed before entering guest mode. Move it
to main vcpu event loop since timer events should be processed even while
vcpu is halted.  Timer may cause interrupt/nmi to be injected and only then
vcpu will be unhalted.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Trivial.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Allows reading back hardware capability.
Signed-off-by: NAvi Kivity <avi@redhat.com>

This allows reading back how the hardware is configured.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of 'enable_vpid=1', use a simple 'vpid=1'.
Signed-off-by: NAvi Kivity <avi@redhat.com>

It is a static vmx-specific function.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Useful to see how the module was loaded.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The prioritized bit vector manipulation functions are useful in both vmx and
svm.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

svm_do_inject_vector() reimplements pop_irq().
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We ignore writes to the performance counters and performance event
selector registers already. Kaspersky antivirus reads the eventsel
MSR causing it to crash with the current behaviour.

Return 0 as data when the eventsel registers are read to stop the
crash.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

free_mmu_pages() should only undo what alloc_mmu_pages() does.
Free mmu pages from the generic VM destruction function, kvm_destroy_vm().
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

After discussion with Marcelo, we decided to rework device assignment framework
together. The old problems are kernel logic is unnecessary complex. So Marcelo
suggest to split it into a more elegant way:

1. Split host IRQ assign and guest IRQ assign. And userspace determine the
combination. Also discard msi2intx parameter, userspace can specific
KVM_DEV_IRQ_HOST_MSI | KVM_DEV_IRQ_GUEST_INTX in assigned_irq->flags to
enable MSI to INTx convertion.

2. Split assign IRQ and deassign IRQ. Import two new ioctls:
KVM_ASSIGN_DEV_IRQ and KVM_DEASSIGN_DEV_IRQ.

This patch also fixed the reversed _IOR vs _IOW in definition(by deprecated the
old interface).

[avi: replace homemade bitcount() by hweight_long()]
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fix this sparse warnings:
  arch/x86/kvm/lapic.c:916:22: warning: symbol 'lapic_timer_ops' was not declared. Should it be static?
  arch/x86/kvm/i8254.c:268:22: warning: symbol 'kpit_ops' was not declared. Should it be static?
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Copy in SN2 RTC based ITC emulation for fast exit. The two versions
have the same size, so a dropin is simpler than patching the branch
instruction to hit the SN2 version.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On SN2 do not pass down the real ITC frequency, but rather patch the
values to match the SN2 RTC frequency.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Move all reading of special register 'AR_ITC' into two functions, one
in the kernel and one in the VMM module. When running on SN2, base the
result on the RTC rather the system ITC, as the ITC isn't
synchronized.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On SN2, map in the SN2 RTC registers to the VMM module, needed for ITC
emulation.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Deliver interrupt during destination matching loop.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The new way does not require additional loop over vcpus to calculate
the one with lowest priority as one is chosen during delivery bitmap
construction.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

ioapic_deliver() and kvm_set_msi() have code duplication. Move
the code into ioapic_deliver_entry() function and call it from
both places.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

There is no reason to update the shadow pte here because the guest pte
is only changed to dirty state.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Gleb fixed bitmap ops usage in kvm_ioapic_get_delivery_bitmask.

Sheng merged two functions, as well as fixed several issues in
kvm_get_intr_delivery_bitmask
1. deliver_bitmask is a bitmap rather than a unsigned long intereger.
2. Lowest priority target bitmap wrong calculated by mistake.
3. Prevent potential NULL reference.
4. Declaration in include/kvm_host.h caused powerpc compilation warning.
5. Add warning for guest broadcast interrupt with lowest priority delivery mode.
6. Removed duplicate bitmap clean up in caller of kvm_get_intr_delivery_bitmask.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Modify the arg of kvm_get_lowest_prio_vcpu().
Make it consistent with its declaration.
Signed-off-by: NYang Zhang <yang.zhang@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Hide the internals of vcpu awakening / injection from the in-kernel
emulated timers. This makes future changes in this logic easier and
decreases the distance to more generic timer handling.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>