Remove the xfs_bitmap_destroy call from the end of xrep_reap_extents
because this sort of violates our rule that the function initializing a
structure should destroy it.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

When I lifted the code in xfs_alloc_ag_vextent_lastblock out of a loop,
I forgot to convert all the accesses to len to be pointer dereferences.

Coverity-id: 1457918
Fixes: 5113f8ec ("xfs: clean up weird while loop in xfs_alloc_ag_vextent_near")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

If the xfs_buf_map array allocation in xfs_dabuf_map fails for whatever
reason, we bail out with error code zero.  This will confuse callers, so
make sure that we return ENOMEM.  Allocation failure should never happen
with the small size of the array, but code defensively anyway.

Fixes: 45feef8f ("xfs: refactor xfs_dabuf_map")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Move the code for verifying the iclog state on a clean unmount into a
helper, and instead of checking the iclog state just rely on the shutdown
check as they are equivalent.  Also remove the ifdef DEBUG as the
compiler is smart enough to eliminate the dead code for non-debug builds.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

When the log is shut down all iclogs are in the XLOG_STATE_IOERROR state,
which means that xlog_state_want_sync and xlog_state_release_iclog are
no-ops.  Remove the whole section of code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Remove the ignored return value from xfs_log_unmount_write, and also
remove a rather pointless assert on the return value from xfs_log_force.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

A shutdown log is a slow failure path.  Add an unlikely annotation to
it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

This is much less widely used than the bc_private union was, so this
is done as a single patch. The named union xfs_btree_cur_private
goes away and is embedded into the struct xfs_btree_cur_ag as an
anonymous union, and the code is modified via this script:

$ sed -i 's/priv\.\([abt|refc]\)/\1/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

we need to name the btree cursor private structures to be able
to pull them out of the deeply nested structure definition they are
in now.

Based on code extracted from a patchset by Darrick Wong.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Rename the union and it's internal structures to the new name and
remove the temporary defines that facilitated the change.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

BPRV is not longer appropriate because bc_private is going away.
Script:

$ sed -i 's/BTCUR_BPRV/BTCUR_BMBT/g' fs/xfs/*[ch] fs/xfs/*/*[ch]

With manual cleanup to the definitions in fs/xfs/libxfs/xfs_btree.h
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
[darrick: change "BC_BT" to "BTCUR_BMBT", fix subject line typo]
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

bc_private.b -> bc_ino conversion via script:

$ sed -i 's/bc_private\.b/bc_ino/g' fs/xfs/*[ch] fs/xfs/*/*[ch]

And then revert the change to the bc_ino #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
[darrick: tweak the subject line slightly]
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

bc_private.a -> bc_ag conversion via script:

`sed -i 's/bc_private\.a/bc_ag/g' fs/xfs/*[ch] fs/xfs/*/*[ch]`

And then revert the change to the bc_ag #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Just the defines of the new names - the conversion will be in
scripted commits after this.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
[darrick: change "bc_bt" to "bc_ino"]
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Commit 263dde86 ("xfs: cleanup xfs_dir2_block_getdents") introduced
a getdents regression, when it converted the pointer arithmetics to
offset calculations: offset is updated in the loop already for the next
iteration, but the updated offset value is used incorrectly in two
places, where we should have used the not-yet-updated value.

This caused for example "git clean -ffdx" failures to cleanup certain
directory structures when running in a container.

Fix the regression by making sure we use proper offset in the loop body.
Thanks to Christoph Hellwig for suggestion how to best fix the code.

Cc: Christoph Hellwig <hch@lst.de>
Fixes: 263dde86 ("xfs: cleanup xfs_dir2_block_getdents")
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

In xchk_xattr_listent, we attempt to validate the extended attribute
hash structures by performing a attr lookup by (hashed) name.  If the
lookup returns ENODATA, that means that the hash information is corrupt.
The _process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name.  If the lookup
returns ENOENT, that means that the hash information is corrupt.  The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Check the owner field of dir3 block headers.  If it's corrupt, release
the buffer and return EFSCORRUPTED.  All callers handle this properly.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Check the owner field of dir3 data block headers.  If it's corrupt,
release the buffer and return EFSCORRUPTED.  All callers handle this
properly.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Check the owner field of dir3 free block headers and reject the metadata
if there's something wrong with it.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NAllison Collins <allison.henderson@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller.  After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.

Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.

Fixes: de14c5f5 ("xfs: verify free block header fields")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

xfs_verifier_error is supposed to be called on a corrupt metadata buffer
from within a buffer verifier function, whereas xfs_buf_mark_corrupt
is the function to be called when a piece of code has read a buffer and
catches something that a read verifier cannot.  The first function sets
b_error anticipating that the low level buffer handling code will see
the nonzero b_error and clear XBF_DONE on the buffer, whereas the second
function does not.

Since xfs_dir3_free_header_check examines fields in the dir free block
header that require more context than can be provided to read verifiers,
we must call xfs_buf_mark_corrupt when it finds a problem.

Switching the calls has a secondary effect that we no longer corrupt the
buffer state by setting b_error and leaving XBF_DONE set.  When /that/
happens, we'll trip over various state assertions (most commonly the
b_error check in xfs_buf_reverify) on a subsequent attempt to read the
buffer.

Fixes: bc1a09b8 ("xfs: refactor verifier callers to print address of failing check")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Add a xfs_failaddr_t parameter to this function so that callers can
potentially pass in (and therefore report) the exact point in the code
where we decided that a metadata buffer was corrupt.  This enables us to
wire it up to checking functions that have to run outside of verifiers.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Add a helper function to get rid of buffers that we have decided are
corrupt after the verifiers have run.  This function is intended to
handle metadata checks that can't happen in the verifiers, such as
inter-block relationship checking.  Note that we now mark the buffer
stale so that it will not end up on any LRU and will be purged on
release.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

In e7ee96df, we converted all ITER_ABORT users to use ECANCELED
instead, but we forgot to teach xfs_rmap_has_other_keys not to return
that magic value to callers.  Fix it now by using ECANCELED both to
abort the iteration and to signal that we found another reverse mapping.
This enables us to drop the separate boolean flag.

Fixes: e7ee96df ("xfs: remove all *_ITER_ABORT values")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Log the corrupt buffer before we release the buffer.

Fixes: a5155b87 ("xfs: always log corruption errors")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

There is just a single user left, so remove it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

struct xfs_agfl is a header in front of the AGFL entries that exists
for CRC enabled file systems.  For not CRC enabled file systems the AGFL
is simply a list of agbno.  Make the CRC case similar to that by just
using the list behind the new header.  This indirectly solves a problem
with modern gcc versions that warn about taking addresses of packed
structures (and we have to pack the AGFL given that gcc rounds up
structure sizes).  Also replace the helper macro to get from a buffer
with an inline function in xfs_alloc.h to make the code easier to
read.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit().  That can confuse things.  In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file.  If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.

For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should.  Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.

Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.

This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:

        mkfs.xfs -f /dev/vdb
        mount /vdb
        touch /vdb/file
        chattr +S /vdb/file
        accton /vdb/file
        mkfs.xfs -f /dev/vdc
        mount /vdc
        umount /vdc

It causes:
	WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
	CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
	RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
	[...]
	Call Trace:
	 write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
	 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
	 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
	 do_writepages+0x41/0xe0 mm/page-writeback.c:2344
	 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
	 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
	 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
	 generic_write_sync include/linux/fs.h:2867 [inline]
	 xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
	 call_write_iter include/linux/fs.h:1901 [inline]
	 new_sync_write+0x130/0x1d0 fs/read_write.c:483
	 __kernel_write+0x54/0xe0 fs/read_write.c:515
	 do_acct_process+0x122/0x170 kernel/acct.c:522
	 slow_acct_process kernel/acct.c:581 [inline]
	 acct_process+0x1d4/0x27c kernel/acct.c:607
	 do_exit+0x83d/0xbc0 kernel/exit.c:791
	 kthread+0xf1/0x140 kernel/kthread.c:257
	 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352

This bug was originally reported by syzbot at
https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com.

Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com
Signed-off-by: NEric Biggers <ebiggers@google.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Let the low-level attr code only allocate the needed buffer size
for xfs_attrmulti_attr_get instead of allocating the upper bound
at the top of the call chain.
Suggested-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

No need to allocate the max size if we can just allocate the easily
known actual ACL size.
Suggested-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Use the round_down macro, and use the size of the uint32 type we
use in the callback that fills the buffer to make the code a little
more clear - the size of it is always the same as int for platforms
that Linux runs on.
Suggested-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The attrlist cursor only exists as part of an attr list context, so
embedd the structure instead of pointing to it.  Also give it a proper
xfs_ prefix and remove the obsolete typedef.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Now that we use the on-disk flags field also for the interface to the
lower level attr routines we can use the XFS_ATTR_INCOMPLETE definition
from the on-disk format directly instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The ATTR_* flags have a long IRIX history, where they a userspace
interface, the on-disk format and an internal interface.  We've split
out the on-disk interface to the XFS_ATTR_* values, but despite (or
because?) of that the flag have still been a mess.  Switch the
internal interface to pass the on-disk XFS_ATTR_* flags for the
namespace and the Linux XATTR_* flags for the actual flags instead.
The ATTR_* values that are actually used are move to xfs_fs.h with a
new XFS_IOC_* prefix to not conflict with the userspace version that
has the same name and must have the same value.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>