Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 3月, 2017 1 次提交
    • A
      perf stat: Output JSON MetricExpr metric · 37932c18
      由 Andi Kleen 提交于 
      Add generic infrastructure to perf stat to output ratios for
"MetricExpr" entries in the event lists. Many events are more useful as
ratios than in raw form, typically some count in relation to total
ticks.

Transfer the MetricExpr information from the alias to the evsel.

We mark the events that need to be collected for MetricExpr, and also
link the events using them with a pointer. The code is careful to always
prefer the right event in the same group to minimize multiplexing
errors. At the moment only a single relation is supported.

Then add a rblist to the stat shadow code that remembers stats based on
the cpu and context.

Then finally update and retrieve and print these values similarly to the
existing hardcoded perf metrics. We use the simple expression parser
added earlier to evaluate the expression.

Normally we just output the result without further commentary, but for
--metric-only this would lead to empty columns. So for this case use the
original event as description.

There is no attempt to automatically add the MetricExpr event, if it is
missing, however we suggest it to the user, because the user tool
doesn't have enough information to reliably construct a group that is
guaranteed to schedule. So we leave that to the user.

  % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}'
       1.000147889        800,085,181      unc_p_clockticks
       1.000147889         93,126,241      unc_p_freq_max_os_cycles  #     11.6
       2.000448381        800,218,217      unc_p_clockticks
       2.000448381        142,516,095      unc_p_freq_max_os_cycles  #     17.8
       3.000639852        800,243,057      unc_p_clockticks
       3.000639852        162,292,689      unc_p_freq_max_os_cycles  #     20.3

  % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
  #    time         freq_max_os_cycles %
       1.000127077      0.9
       2.000301436      0.7
       3.000456379      0.0

v2: Change from DivideBy to MetricExpr
v3: Use expr__ prefix.  Support more than one other event.
v4: Update description
v5: Only print warning message once for multiple PMUs.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      37932c18
  3. 14 3月, 2017 1 次提交
    • H
      perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info · f3b3614a
      由 Hari Bathini 提交于 
      Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.

Committer notes:

Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.

Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:

  util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
     ret  += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
                                         ^
Testing it:

  # perf record --namespaces -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
  #
  # perf report -D
  <SNIP>
  3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
                [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
                 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]

  0x1151e0 [0x30]: event: 9
  .
  . ... raw event: size 48 bytes
  .  0000:  09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00  ......0..q.h....
  .  0010:  a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00  .9...9...(.c....
  .  0020:  03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00  ................
  <SNIP>
        NAMESPACES events:          1
  <SNIP>
  #
Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f3b3614a
  5. 15 2月, 2017 1 次提交
    • A
      perf evsel: Do not put a variable sized type not at the end of a struct · c24ae6d9
      由 Arnaldo Carvalho de Melo 提交于 
      As this is a GNU extension and while harmless in this case, we can do
the same thing in a more clearer way by using a existing thread_map and
cpu_map constructors:

With this we avoid this while compiling with clang:

  util/evsel.c:1659:17: error: field 'map' with variable sized type 'struct cpu_map' not at the end of a struct or class is a GNU extension
        [-Werror,-Wgnu-variable-sized-type-not-at-end]
          struct cpu_map map;
                         ^
  util/evsel.c:1667:20: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension
        [-Werror,-Wgnu-variable-sized-type-not-at-end]
          struct thread_map map;
                            ^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-207juvrqjiar7uvas2s83v5i@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c24ae6d9
  7. 14 2月, 2017 1 次提交
  9. 16 12月, 2016 2 次提交
  11. 23 11月, 2016 1 次提交
  13. 24 10月, 2016 1 次提交
  15. 03 10月, 2016 1 次提交
    • A
      perf tools: Experiment with cppcheck · 18ef15c6
      由 Arnaldo Carvalho de Melo 提交于 
      Experimenting a bit using cppcheck[1], a static checker brought to my
attention by Colin, reducing the scope of some variables, reducing the
line of source code lines in the process:

  $ cppcheck --enable=style tools/perf/util/thread.c
  Checking tools/perf/util/thread.c...
  [tools/perf/util/thread.c:17]: (style) The scope of the variable 'leader' can be reduced.
  [tools/perf/util/thread.c:133]: (style) The scope of the variable 'err' can be reduced.
  [tools/perf/util/thread.c:273]: (style) The scope of the variable 'err' can be reduced.

Will continue later, but these are already useful, keep them.

1: https://sourceforge.net/p/cppcheck/wiki/Home/

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ixws7lbycihhpmq9cc949ti6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      18ef15c6
  17. 29 9月, 2016 3 次提交
  19. 21 9月, 2016 1 次提交
  21. 19 8月, 2016 1 次提交
    • A
      perf evsel: Do not access outside hw cache name arrays · c53412ee
      由 Arnaldo Carvalho de Melo 提交于 
      We have to check if the values are >= *_MAX, not just >, fix it.

From the bugzilla report:

''In file /tools/perf/util/evsel.c  function __perf_evsel__hw_cache_name
it appears that there is a bug that reads beyond the end of the buffer.
The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be
equal to the maximum value. Later, when statement "if
(!perf_evsel__is_cache_op_valid(type, op))" is executed, the function
can access array perf_evsel__hw_cache_stat[type] beyond the end of the
buffer.

It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)"
should be "if (type >= PERF_COUNT_HW_CACHE_MAX)"

Bug found with Coverity and manual code review. No attempts were made to
execute the code with a maximum type value.''

Committer note:

Testing it:

  $ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1
  [ perf record: Woken up 16 times to write data ]
  [ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ]
  $ perf evlist
  L1-dcache-load-misses
  L1-dcache-loads
  L1-dcache-stores
  L1-icache-load-misses
  LLC-load-misses
  LLC-loads
  LLC-store-misses
  LLC-stores
  branch-load-misses
  branch-loads
  dTLB-load-misses
  dTLB-loads
  dTLB-store-misses
  dTLB-stores
  iTLB-load-misses
  iTLB-loads
  node-load-misses
  node-loads
  node-store-misses
  node-stores
  $ perf list cache

  List of pre-defined events (to be used in -e):

    L1-dcache-load-misses        [Hardware cache event]
    L1-dcache-loads              [Hardware cache event]
    L1-dcache-stores             [Hardware cache event]
    L1-icache-load-misses        [Hardware cache event]
    LLC-load-misses              [Hardware cache event]
    LLC-loads                    [Hardware cache event]
    LLC-store-misses             [Hardware cache event]
    LLC-stores                   [Hardware cache event]
    branch-load-misses           [Hardware cache event]
    branch-loads                 [Hardware cache event]
    dTLB-load-misses             [Hardware cache event]
    dTLB-loads                   [Hardware cache event]
    dTLB-store-misses            [Hardware cache event]
    dTLB-stores                  [Hardware cache event]
    iTLB-load-misses             [Hardware cache event]
    iTLB-loads                   [Hardware cache event]
    node-load-misses             [Hardware cache event]
    node-loads                   [Hardware cache event]
    node-store-misses            [Hardware cache event]
    node-stores                  [Hardware cache event]
  $
Reported-by: NBrian Sweeney <bsweeney@lgsinnovations.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c53412ee
  23. 03 8月, 2016 1 次提交
  25. 29 7月, 2016 1 次提交
  27. 16 7月, 2016 2 次提交
    • W
      perf tools: Enable overwrite settings · 626a6b78
      由 Wang Nan 提交于 
      This patch allows following config terms and option:

Globally setting events to overwrite;

  # perf record --overwrite ...

Set specific events to be overwrite or no-overwrite.

  # perf record --event cycles/overwrite/ ...
  # perf record --event cycles/no-overwrite/ ...

Add missing config terms and update the config term array size because
the longest string length has changed.

For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.

Test result:

  # perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
  # perf evlist -v
  syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      626a6b78
    • A
      perf evlist: Drop redundant evsel->overwrite indicator · 32a951b4
      由 Arnaldo Carvalho de Melo 提交于 
      evsel->overwrite indicator means an event should be put into
overwritable ring buffer. In current implementation, it equals to
evsel->attr.write_backward. To reduce compliexity, remove
evsel->overwrite, use evsel->attr.write_backward instead.

In addition, in __perf_evsel__open(), if kernel doesn't support
write_backward and user explicitly set it in evsel, don't fallback
like other missing feature, since it is meaningless to fall back to
a forward ring buffer in this case: we are unable to stably read
from an forward overwritable ring buffer.

Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-2-git-send-email-wangnan0@huawei.comSigned-off-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      32a951b4
  29. 13 7月, 2016 2 次提交
  31. 30 6月, 2016 1 次提交
  33. 22 6月, 2016 1 次提交
  35. 04 6月, 2016 1 次提交
  37. 03 6月, 2016 1 次提交
  39. 30 5月, 2016 1 次提交
    • A
      perf tools: Per event max-stack settings · 792d48b4
      由 Arnaldo Carvalho de Melo 提交于 
      The tooling counterpart, now it is possible to do:

  # perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
  # perf evlist -v
  sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
  cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
  cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events

Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      792d48b4
  41. 21 5月, 2016 1 次提交
  43. 13 5月, 2016 2 次提交
    • A
      perf evsel: Handle EACCESS + perf_event_paranoid=2 in fallback() · 08094828
      由 Arnaldo Carvalho de Melo 提交于 
      Now with the default for the kernel.perf_event_paranoid sysctl being 2 [1]
we need to fall back to :u, i.e. to set perf_event_attr.exclude_kernel
to 1.

Before:

  [acme@jouet linux]$ perf record usleep 1
  Error:
  You may not have permission to collect stats.

  Consider tweaking /proc/sys/kernel/perf_event_paranoid,
  which controls use of the performance events system by
  unprivileged users (without CAP_SYS_ADMIN).

  The current value is 2:

    -1: Allow use of (almost) all events by all users
  >= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK
  >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
  >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN
  [acme@jouet linux]$

After:

  [acme@jouet linux]$ perf record usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.016 MB perf.data (7 samples) ]
  [acme@jouet linux]$ perf evlist
  cycles:u
  [acme@jouet linux]$ perf evlist -v
  cycles:u: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  [acme@jouet linux]$

And if the user turns on verbose mode, an explanation will appear:

  [acme@jouet linux]$ perf record -v usleep 1
  Warning:
  kernel.perf_event_paranoid=2, trying to fall back to excluding kernel samples
  mmap size 528384B
  [ perf record: Woken up 1 times to write data ]
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.6.0-rc7+/build/vmlinux for symbols
  [ perf record: Captured and wrote 0.016 MB perf.data (7 samples) ]
  [acme@jouet linux]$

[1] 0161028b ("perf/core: Change the default paranoia level to 2")
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b20jmx4dxt5hpaa9t2rroi0o@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      08094828
    • A
      perf evsel: Improve EPERM error handling in open_strerror() · 7d173913
      由 Arnaldo Carvalho de Melo 提交于 
      We were showing a hardcoded default value for the kernel.perf_event_paranoid
sysctl, now that it became more paranoid (1 -> 2 [1]), this would need to be
updated, instead show the current value:

  [acme@jouet linux]$ perf record ls
  Error:
  You may not have permission to collect stats.

  Consider tweaking /proc/sys/kernel/perf_event_paranoid,
  which controls use of the performance events system by
  unprivileged users (without CAP_SYS_ADMIN).

  The current value is 2:

    -1: Allow use of (almost) all events by all users
  >= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK
  >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
  >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN
  [acme@jouet linux]$

[1] 0161028b ("perf/core: Change the default paranoia level to 2")
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0gc4rdpg8d025r5not8s8028@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7d173913
  45. 10 5月, 2016 1 次提交
    • A
      perf evsel: Print state of perf_event_attr.write_backward · 0a241ef4
      由 Arnaldo Carvalho de Melo 提交于 
      Now we can see if it is set when using verbose mode in various tools,
such as 'perf test':

  # perf test -vv back
  45: Test backward reading from ring buffer                   :
  --- start ---
  <SNIP>
  ------------------------------------------------------------
  perf_event_attr:
    type                             2
    size                             112
    config                           0x98
    { sample_period, sample_freq }   1
    sample_type                      IP|TID|TIME|CPU|PERIOD|RAW
    disabled                         1
    mmap                             1
    comm                             1
    task                             1
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
    write_backward                   1
  ------------------------------------------------------------
  sys_perf_event_open: pid 20911  cpu -1  group_fd -1  flags 0x8
  <SNIP>
  ---- end ----
  Test backward reading from ring buffer: Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kxv05kv9qwl5of7rzfeiiwbv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0a241ef4
  47. 28 4月, 2016 2 次提交
  49. 26 4月, 2016 1 次提交
    • A
      perf evlist: Decode perf_event_attr->branch_sample_type · a213b92e
      由 Arnaldo Carvalho de Melo 提交于 
      While trying to use --call-graph lbr in 'perf trace', since we only are
interested in the callchain for userspace, up to the callchain, I found
that 'perf evlist' is not decoding the branch_sample_type field, fix it.

Before:

  # perf record --call-graph lbr usleep 1
  # perf evlist -v
  cycles:ppp: size: 112, { sample_period, sample_freq }: 4000,
  sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK,
  disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1,
  precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1,
  comm_exec: 1, branch_sample_type: 51201
                ^^^^^^^^^^^^^^^^^^^^^^^^^

After:

  # perf evlist -v
  cycles:ppp: size: 112, { sample_period, sample_freq }: 4000,
  sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK,
  disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1,
  precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1,
  comm_exec: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hozai7974u0ulgx13k96fcaw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a213b92e
  51. 18 4月, 2016 1 次提交
  53. 15 4月, 2016 5 次提交
  55. 13 4月, 2016 1 次提交
  57. 12 4月, 2016 1 次提交