- 08 10月, 2009 11 次提交
-
-
由 Anant Gole 提交于
TI HECC (High End CAN Controller) module is found on many TI devices. It has 32 hardware mailboxes with full implementation of CAN protocol 2.0B with bus speeds up to 1Mbps. Specifications of the module are available on TI web <http://www.ti.com> Signed-off-by: NAnant Gole <anantgole@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private myri10ge_priv structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas de Pesloüan 提交于
The variable old_active is first set to bond->curr_active_slave. Then, it is unconditionally set to new_active, without being used in between. The first assignment, having no side effect, is useless. Signed-off-by: NNicolas de Pesloüan <nicolas.2p.debian@free.fr> Reviewed-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas de Pesloüan 提交于
When parsing module parameters, bond_check_params() erroneously use 'xor_mode' as the name of a module parameter in an error message. The right name for this parameter is 'xmit_hash_policy'. Signed-off-by: NNicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2009 29 次提交
-
-
由 Ajit Khaparde 提交于
adapter doesnot need to maintain a copy of net_device_stats. Use the one already available in net_device. This patch takes care of the same. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The data center bridging ops structure can be const Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
All usages of structure net_proto_ops should be declared const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
The receive_buf methods of the N_PPP and N_SYNC_PPP line disciplines, ppp_asynctty_receive() and ppp_sync_receive(), call tty_unthrottle() which may sleep. Fix the comments claiming otherwise. Impact: documentation Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
This is a fix for a bug which was a result of wrong use of checksum offload flag. The status of tx-checksumming was not changed from on to off after a 'ethtool -K <ifname> tx off' operation. Use the proper checksum offload flag NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Patch is against net-2.6 tree. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
MCC_STATUS_NOT_SUPPORTED should be decimal 66 not hex 66. This patch fixes this typo. Patch against net-2.6 tree. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
While updating the statistics to be passed via the get_stats, tx multicast frames were being accounted instead of rx multicast frames. This patch fixes the bug. This patch is against the net-2.6 tree. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Get rid of spinlock and private mutex usage for exclusive access to the HW semaphore register. rtnl_lock already creates exclusive access to this register in all driver API. Add rtnl to firmware worker threads that also use the HW semaphore register. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Check that we are not already polling firmware events before we queue the firmware event worker, then disable firmware interrupts. Otherwise we can queue the same event multiple times. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Version Update. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Allow multiple functions with INTA. - Removed the condition to allow only one vpath with INTA - Ensure that the alarm bit in titan_mask_all_int register is cleared when driver exits. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Added a function to check if FCS stripping is disabled by the firmware, if it is not disabled fail driver load. - By default FCS stripping is disabled by the firmware. With this assumption driver decrements the indicated packet length by 4 bytes(FCS length). - This patch ensures that FCS stripping is disabled during driver load time. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Removed the wrr_rebalance function - This feature is not supported by the ASIC, hence removing the related code. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Fix a crash in PAE system due to wrong typecasting. - On PAE system size_t is unsigned int which is 32bit. Avoid casting 64 bit address to 32 bit Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Removed accessing GENDMA_INT register - This allowed the firmware to perform a generic DMA write to host memory. This feature is not supported by the ASIC, this patch removes access to GENDMA_INT register. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Update driver_config->vpath_per_dev for each function in probe. - vpath_per_device specifies number of vpaths supported for each function/device. The current code was updating vpath_per_device only for physical device, however this has to be updated for each function also in case of a MF(Multi function) device. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
vxge: Modify __vxge_hw_device_is_privilaged() to not assume function-0 as the privileged function: Resubmit#1 - vxge driver was assuming function-0 is always the privilaged function. Now that restriction has been removed any function can act as a privilaged function. - This patch modifies the __vxge_hw_device_is_privilaged routine to not assume function-0 as the privileged function. - Recreated the patch by incorporating review comments from Dave Miller to remove double slash in path names. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
There are some switches that will do write combining when they see two sequential regions written. In order to avoid any possible write combining issues it is necessary to add a flush after writing each piece of a rar register. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This update adds additional exception handling to the phy code to handle situations where it may be called incorrectly. In addition it adds some bounds checking to the cable length checks to prevent an array overrun in the event that the hardware returned a different value than expected. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch adds a retry to phy reads in the event of failure. The original code broke out of the loop on failure and this is a mistake as we should be trying to do the read twice. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch moves the generic portion of the copper link setup into a seperate function in e1000_phy.c. This helps to reduce the size of copper_link_setup_82575 and make it a bit more readable. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
igb doesn't have any devices that use a microwire interface for NVM. As such the code related to this can be removed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch allows us to treat the alternate mac address as though it is the physical address on the adapter. This is accomplished by letting the alt_mac_address function to only fail on an NVM error. If no errors occur and the alternate mac address is not present then RAR0 is read as the default mac address. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The mailbox timeout routines need to be updated as they were not correctly handling the case of a mailbox timeout and could cause issues with long delays when used. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Both the read and write mailbox functions need to acquire the mailbox lock. Since that is the case we might as well combine both of the procedures into one function so it is easier to maintain. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch adds the device ID necessary to support the 82576NS SerDes adapter. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
In order to support functions such as vlan tag stripping when SR-IOV is enabled any given packet must match at least one filter. However in the case of promiscous mode being enabled on the PF the traffic routed to it may not match any filters and is just sent to the PF by default. In order to make certain that this traffic is processed we can set all bits in the UTA registers to create a pseudo promiscous mode filter that accepts all packets. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-