- 05 10月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
There is no point in implementing a detect callback for the MAX6875, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This basically divides the binary module size by 2. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBen Gardner <gardner.ben@gmail.com>
-
- 02 10月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
[akpm@linux-foundation.org: fix KVM] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 9月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 9月, 2009 2 次提交
-
-
由 Roel Kluin 提交于
The allocation may fail. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 9月, 2009 2 次提交
-
-
由 Anton Vorontsov 提交于
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 M. Mohan Kumar 提交于
Current lkdtm code puts a probe on __do_IRQ for some of the kdump test cases. Since __do_IRQ is deprecated, change lkdtm code to use do_IRQ function. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 9月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 9月, 2009 4 次提交
-
-
由 David Altobelli 提交于
Add poll handler to hpilo, to allow applications a low overhead method of waiting for data. Signed-off-by: NDavid Altobelli <david.altobelli@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Altobelli 提交于
Add interrupt handler to hpilo. This is enablement for poll handler, and it also simplifies the logic for handling an iLO reset, because now only the interrupt handler needs to look for reset, the file system interfaces only need to return failure when a reset has happened. Signed-off-by: NDavid Altobelli <david.altobelli@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Altobelli 提交于
Refactor some hpilo routines in order to allow for locking changes in interrupt handling. Should not be functionally different. Signed-off-by: NDavid Altobelli <david.altobelli@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 9月, 2009 1 次提交
-
-
由 Randy Dunlap 提交于
Fix warnings in SGI XPC sn2 driver: lots of printk format warnings and: drivers/misc/sgi-xp/xpc_sn2.c: In function 'xpc_get_partition_rsvd_page_pa_sn2': drivers/misc/sgi-xp/xpc_sn2.c:618: warning: passing argument 3 of 'sn_partition_reserved_page_pa' from incompatible pointer type drivers/misc/sgi-xp/xpc_sn2.c:618: warning: passing argument 4 of 'sn_partition_reserved_page_pa' from incompatible pointer type (likely due to generic u64 / long long changes) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NRobin Holt <holt@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 03 9月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NNeil Horman <nhorman@txudriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2009 3 次提交
-
-
由 James Bottomley 提交于
Now that hot add works correctly, if a new device is added, we're still operating on stale enclosure data, so fix that by updating the enclosure diagnostic pages when we get notified of a device hot add Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Bottomley 提交于
Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Bottomley 提交于
In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 31 7月, 2009 2 次提交
-
-
the code allready uses flush_kernel_dcache_page(). This patch updates the driver to the recent sg API changes which require that either SG_MITER_TO_SG or SG_MITER_FROM_SG is set. SG_MITER_TO_SG calls flush_kernel_dcache_page() in sg_mitter_stop() Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
由 Hartley Sweeten 提交于
The EP93xx features two PWMs (one on the EP9307) with the following features: * Configurable dual output * Separate input clocks for each PWM output * 16-bit resolution * Programmable pulse width (duty cycle), interval (frequency), and polarity This adds the necessary core support as well as the driver. A sysfs interface is provided to control the PWM outputs. Signed-off-by: NMatthieu Crapet <mcrapet@gmail.com> Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NRyan Mallon <ryan@bluewatersys.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 7月, 2009 1 次提交
-
-
由 Sebastian Heutling 提交于
Under certain circumstances msleep(1) within the loop, which waits for the EEPROM to be finished, might take longer than the timeout. On the next loop the status register might now return to be ready and therefore the loop finishes. The following check now tests if a timeout occurred and if so returns an error although the device reported it was ready. This fix replaces testing the occurrence of the timeout by testing the "not ready" bit in the status register. Signed-off-by: NSebastian Heutling <heutling@who-ing.de> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 7月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 7月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Commit 5fd29d6c ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 7月, 2009 1 次提交
-
-
由 Patrick McHardy 提交于
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 6月, 2009 17 次提交
-
-
由 Jack Steiner 提交于
Fix the copyright statements in a couple of GRU files. No functional changes are being made. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Delete references to the SGI GRU GSH hardware resources. These GRU resources have been deleted from the hardware. (These resources have never benn used, anyway). Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Minor fixes to the SGI GRU grudump facility: - fix address where user data is written - add gru number to data passed to user - indicate if context is locked Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Fix potential SGI GRU bug that could cause a use-after-free. If one thread in a task is flushing the GRU and another thread destroys the GRU context, there is the potential to access a table after it has been freed. Copy the gms pointer to a local variable before unlocking the gts table. Note that no refcnt is needed for the gms - the reference is held indirectly by the task's mm_struct. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Add a user request to specify the gru instruction slice parameter for user contexts. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Change the user GRU request for specifying the "task_slice" option to use a generic infrastructure that can be expanded in the future to include additional context options. No new capabilities are added with this patch. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Cleanup of GRU inline functions to eliminate unnecessary inline code. Update function descriptions. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Delete the user request for fetching the status of a GRU chiplet. This request has been made obsolete by other changes. Note: this is not a change to a user API - there are no compatibility issues with this change. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Collect GRU statistics for each user GRU context. Statistics are kept for TLB misses & content resource contention. Add user request for retrieving the statistics. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Fix bug in automatic retry of GRU instruction failures. CBR substatus (message queue failure) was being checked incorrectly. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Add user function to explicitly unload GRU kernel contexts from the GRU. Only contexts that are not in-use will be unloaded. This function is primarily for testing. It is not expected that this will be used in normal production systems. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Fix two problems related to GRU instruction failures. Cache coherency is not maintained for CBEs except when loading or unloading contexts. When reading a CBE to extract error information, the CBE must first be flushed from the cache. The function that reads kerrnel CBEs was reading the wrong CBE. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Update GRU driver to the latest version of the GRU spec. This consists of minor updates: - changes & additions to error status bits - new restriction on handling of TLB misses while in FMM mode - new field (not used by software) in TFH Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Change the kernel self tests that can be optionally executed on GRU initialization. This is primarily for testing. Eliminate the BUG statements on failure and return bad status. Add ioctl interface to execute the tests on demand. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Add support for asynchronous GRU instructions. Currently, asynchronous instructions are supported only for GRU instructions issued by the kernel. [akpm@linux-foundation.org: build fix] Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Add support for interrupts generated by GRU instruction completion. Previously, the only interrupts were for TLB misses. The hardware also supports interrupts on instruction completion. This will be supported for instructions issued by the kernel. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Check whether the gru state being loaded into a gru is from a new context or a previously unloaded context. If new, simply zero out the hardware context; if unloaded and valid, reload the old state. This change is primarily for reloading kernel contexts where the previous is not required to be saved. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-