Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NUwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Bump version to 3.04.12
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Normally In HBA reset path MPT driver will flush existing work in current work
queue (mpt/0) . This is just a dummy activity for MPT driver point of
view, since HBA reset will turn off Work queue events.

It means we will simply returns from work queue without doing anything.
But for the case where Work is already done (half the way), we have to have
that work to be done.

Considering above condition we stuck forever since Deadlock in scsi midlayer
and MPT driver. sd_sync_cache() will wait forever since HBA is not in
Running state, and it will never come into Running state since
sd_sync_cache() is called from HBA reset context.
Now new code will not wait for half cooked work to be finished
before returning from HBA reset.

Once we are out of HBA reset, EH thread will change host state to running from
recovery and work waiting for running state of HBA will be finished.
New code is turning ON firmware event from another special work called
Rescan toplogy.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Driver is modified to return DID_NO_CONNECT for all pending I/O
requests for bus type SAS, if it founds the target is removed at
the firmware level.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch is solving problem for PAE kernel DMA operation.
On PAE system dma_addr and unsigned long will have different
values.
Now dma_addr is not type casted using unsigned long.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

On Big endian system kernel will crash due to address translation
is not handle properly.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Check for phyinfo->phy before calling sas_port_delete_phy.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Bump version to 3.04.11
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Code cleanup of host page alloc and diag reset.
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Do not set max_id value received from FW. Once SAS transport layer is
introduced max_id value is missleading to SCSI mid layer. Use max_id to
infinite value.

logic of can queue of scsi host is changed.
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Change config request timeout value to 30 seconds.
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Handle insufficient resources status as similar to busy status.
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Removed mptscsih_timer_expired. This timer is no more use.
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Change DEFINED value of can queue for FC and SAS devices.
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch is the result of an automatic spatch transformation to convert
all ndo_start_xmit() return values of 0 to NETDEV_TX_OK.

Some occurences are missed by the automatic conversion, those will be
handled in a seperate patch.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix two typos in mptsas_not_responding_devices. It was mutex_lock instead
of unlock.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Acked-by: N"Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

We're about to make DMA_nnBIT_MASK() emit `deprecated' warnings.  Convert the
remaining stragglers which are visible to the x86_64 build.

Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Eric Moore <Eric.Moore@lsil.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Yi Zou <yi.zou@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix recent fusion driver kernel-doc fatal error and warnings.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Eric.Moore@lsi.com
Cc: support@lsi.com
Cc: DL-MPTFusionLinux@lsi.com
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively.

0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases
where its in direct proximity to one of the other values.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix various typos in documentation txts.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Several of the doc book in the previous patches had incorrect multi-line short
function descriptors.  Fixed it all to be the correct single line descriptor.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Firmware is able to handle Broadcast primitives, but upstream driver does not
have support for broadcast primitive handling. Now this patch is mainly to
support broadcast primitives.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

FW will report Queue full event to Driver and driver will handle this queue
full event to SCSI Mid layer.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

1. Handle integrated Raid device(Add/Delete) and error condition and check
   related to Raid device. is_logical_volume will represent logical volume
   device.
2. Raid device dual port support is added. Main functions to support this
   feature are mpt_raid_phys_disk_get_num_paths and mpt_raid_phys_disk_pg1.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Resending patch considering Grants G's code review.

Main goal to submit this patch is code cleaup.
1. Better driver debug prints and code indentation.
2. fault_reset_work_lock is not used anywhere. driver is using taskmgmt_lock
instead of fault_reset_work_lock.
3. setting pci_set_drvdata properly.
4. Ingore config request when IOC is in reset state.( ioc_reset_in_progress
is set).
5. Init/clear managment frame proprely.(INITIALIZE_MGMT_STATUS and
CLEAR_MGMT_STATUS)
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

1.) SAS topology Rescan is added. If Firmware is doing Reset and we get
Device add interrupt from Firmware, we will not receive it as part of Reset
is going ON. After Reset we will do special Rescan of SAS topology.
2.) Driver version changed from 3.04.08 to 3.04.09.

Added proper lock/unlock in mptsas_not_responding_devices() as per James'
comment.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

SAS topology scan is restructured. HBA firmware is generating more
events. Expander Events are added, Link status events are also added with
respect to SAS topology scan optimization.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Now Firmware events are handled by firmware event queue.
Previously it was handled in interrupt context/WorkQueue of Linux.
Firmware Event handling is restructured and optimized.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

1) rewrite of ioctl_cmds internal generated function that issue commands to
firmware, porting them to be single threaded using the generic MPT_MGMT
struct. All wait Queues are replace by completion Queue.
2) added seperate callback handler for ioctl task managment
(mptctl_taskmgmt_reply), to handle command that timeout
3) rewrite mptctl_bus_reset
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

1.) 	Added taskmgmt_quiesce_io flag in IOC and removed resetPending from
	_MPT_SCSI_HOST struct.
2.)	Reset from Scsi mid layer and internal Reset are seperate context.
	Adding DeviceResetCtx for internal Device reset frame.
	mptsas_taskmgmt_complete is optimized as part of implementation.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

1.)	 rewrite taskmanagement request and completion routines, making them
single threaded and using the generic MPT_MGMT struct, deleting
mptscsih_TMHandler, replacing with single request TM handler
mptscsih_IssueTaskMgmt, and killing the watchdog timer functions.
2.) cleanup ioc_reset callback handlers, introducing wrappers for
synchronizing error recovery (mpt_set_taskmgmt_in_progress_flag,
mpt_clear_taskmgmt_in_progress_flag), as the fusion firmware only handles
one task management request at a time
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Rewrite of all internal generated functions that issue commands to firmware,
porting them to be single threaded using the generic MPT_MGMT
struct. Implemented using completion Queue.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

1) 	Previously we had mutliple #defines to use same values.
	Now those #defines are optimized.
	MPT_IOCTL_STATUS_* is removed and  MPT_MGMT_STATUS_* are new
	#defines.
2.)	config path is optimized.
	Instead of wait Queue and timer, using completion Q.
3.)	mpt_timer_expired is not used.

[jejb: elide patch to eliminate mpt_timer_expired]
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

SendEventNotification was handled through FIFO, now it is using doorbell to
communicate with hardware. Added Sleep Flag as an extra argument to support
Can-Sleep feature.  Resending patch including compilation error fix reviewed
by Grant Grundler.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

sas_discovery_quiesce_io flag is used to control IO start/resume functionality.
IO will be stoped while doing discovery of topology. Once discovery is completed
It will resume IO. Resending patch including James review.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The reason for this change is there is a data corruption when four different
physical memory regions in the 36GB to 37GB region are
accessed. This is only affecting 1078.

The solution is we need to use different addressing when filling in
the scatter gather table for the effected memory regions.  So instead
of snooping on all four different memory holes, we treat any physical
addresses in the 36GB address with the same algorithm.

The fix is explained below
1) Ensure that the message frames are NOT located in the trouble
region. There is no remapping available for message frames, they must
be allocated outside the problem region.
2) Ensure that Sense buffers are NOT in the trouble region. There is
no remapping available.
3) Walk through the SGE entries and if any are inside the trouble region
   then they need to be remapped as discussed below.
	1) Set the Local Address bit in the SGE Flags field.
  	MPI_SGE_FLAGS_LOCAL_ADDRESS
  	2) Ensure we are using 64-bit SGEs
  	3) Set MSb (Bit 63) of the 64-bit address, this will indicate buffer
	location is Host Memory.
Signed-off-by: NKashyap Desai <kadesai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

In commit c3a4d78c, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero.  The conversion was done under the assumption that
when a request fails residue count wasn't defined.  However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.

This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers.  While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.

* ide-cd: rq->resid_len cleared on pc success

* mptsas: req->resid_len cleared on success

* sas_expander: rsp/req->resid_len cleared on success

* mpt2sas_transport: req->resid_len cleared on success

* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
  advantage of initial full count to simplify code

Boaz Harrosh spotted bug in resid_len initialization.  Fixed as
suggested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NBorislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>