- 05 10月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 10月, 2009 1 次提交
-
-
由 Andrew Morton 提交于
drivers/input/input.c:1277: warning: 'input_dev_reset' defined but not used Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 9月, 2009 1 次提交
-
-
由 Ingo Molnar 提交于
input: fix build failures caused by Kconfig Winbond WPCD376I Consumer IR hardware driver Kconfig entry Fix these warnings: drivers/built-in.o: In function `apanel_remove': apanel.c:(.text+0x56e852): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `apanel_probe': apanel.c:(.text+0x56eae3): undefined reference to `led_classdev_register' drivers/built-in.o: In function `acpi_fujitsu_hotkey_add': fujitsu-laptop.c:(.text+0x5d7647): undefined reference to `led_classdev_register' fujitsu-laptop.c:(.text+0x5d76b5): undefined reference to `led_classdev_register' drivers/built-in.o: In function `wbcir_probe': winbond-cir.c:(.devinit.text+0x5f375): undefined reference to `led_classdev_register' winbond-cir.c:(.devinit.text+0x5f663): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `wbcir_remove': winbond-cir.c:(.devexit.text+0x7f23): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `fujitsu_cleanup': fujitsu-laptop.c:(.exit.text+0xbe37): undefined reference to `led_classdev_unregister' fujitsu-laptop.c:(.exit.text+0xbe53): undefined reference to `led_classdev_unregister' It happens because the new INPUT_WINBOND_CIR driver relies on new-leds infrastructure - but does not select it in drivers/input/misc/Kconfig. But it selects LEDS_CLASS, which confuses a number of other drivers into thinking that all the leds infrastructure is in place. Fix this by selecting NEW_LEDS as well, like similar drivers do. Eventually, this whole leds infrastructure complexity should be cleaned up, it's been going on for years. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: David Härdeman <david@hardeman.nu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 9月, 2009 2 次提交
-
-
由 Anton Vorontsov 提交于
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Raphael Derosso Pereira 提交于
This version only supports individual cells (no slide support yet). The code has been tested on proprietary development ARM board, but should work fine on other machines. Signed-off-by: NRaphael Derosso Pereira <raphaelpereira@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 22 9月, 2009 3 次提交
-
-
由 David Härdeman 提交于
Add a driver for the the Consumer IR (CIR) functionality of the Winbond WPCD376I chipset (found on e.g. Intel DG45FC motherboards). Signed-off-by: NDavid Härdeman <david@hardeman.nu> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitry Torokhov 提交于
Convert max7359 driver to use IRQ threading instead of using workqueue. Tested-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Kim Kyuwon 提交于
The Maxim MAX7359 is a I2C interfaced key switch controller which provides microprocessors with management of up to 64 key switches. This patch adds support for the MAX7359 key switch controller. Signed-off-by: NKim Kyuwon <q1.kim@samsung.com> Reviewed-by: NTrilok Soni <soni.trilok@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 9月, 2009 1 次提交
-
-
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 9月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 9月, 2009 9 次提交
-
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Joonyoung Shim 提交于
The MELPAS MCS-5000 is the touchscreen controller. The overview of this controller can see at the following website: http://www.melfas.com/product/product01.asp?k_r=eng_ This driver is tested on s3c6410 NCP board and supports only the i2c interface. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Javier Herrero 提交于
Driver for the keyboard hardware documented here: http://www.opencores.org/project,keyboardcontrollerSigned-off-by: NJavier Herrero <jherrero@hvsistemas.es> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
The genirq already provides default hard IRQ handler for threaded IRQs, no need to implement our own here. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
cancel_delayed_work() may spin and therefore should not be used in interrupt contexts. Acked-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Michael Hennerich 提交于
The AD7889 is a new part but 100% software compatible with the AD7879, so add it to the id_table and help text. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Now that input core takes care of restoring state of input devices upon resume we don't need to do anything special here. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Automatically turn off leds and sound effects as part of suspend process and restore led state, sounds and repeat rate at resume. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
The serio ports on i8042 are not completely isolated; while we provide enough locking to ensure proper serialization when accessing control and data registers AUX and KBD ports can still have an effect on each other on PS/2 protocol level. The most prominent effect is that issuing a command for the device connected to one port may cause abort of the command currently executing by the device connected to another port. Since i8042 nor serio subsystem are not aware of the details of the PS/2 protocol (length of the commands and their replies and so on) the locking should be done on libps2 level by adding special handling when we see that we are dealing with serio port on i8042. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 17 9月, 2009 3 次提交
-
-
由 Daniel Ribeiro 提交于
This is a driver for misc input events for the PCAP2 PMIC, it handles the Power key and the Headphone button. Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com> Signed-off-by: NIlya Petrov <ilya.muromec@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Daniel Ribeiro 提交于
Touchscreen driver for the PCAP2 multi function device used in Motorola EZX smartphones. Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
The WM831x series of PMICs support control of initial power on through the ON pin on the device with soft control of the pin at other times. Represent this to userspace as KEY_POWER. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 16 9月, 2009 2 次提交
-
-
由 David Brownell 提交于
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nicolas Pitre 提交于
Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 9月, 2009 1 次提交
-
-
由 Kuninori Morimoto 提交于
After KYCR2 is set, udelay might become necessary if there are only a small number of keys attached. This patch introduces an optional delay through the platform data to address this problem. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 9月, 2009 2 次提交
-
-
由 Henrik Rydberg 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
This one does not have anything useful in DMI either so again we need to use: force=1 keymap=aopen1557 Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 11 9月, 2009 7 次提交
-
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
i8042 is not hot-pluggable and we create the device when we register the driver, so let's save some memory by using platform_device_probe and using __init instead of __devinit. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Ever since we switched from having a polling timer to registering IRQ handlers for both keyboard and AUX ports at the driver registration time, on certain boxes probing for a mouse results in keyboard stopping working. The only real difference between old and new way is that before we disabled ports after unsuccessful probe whereas now we leave them as is. Try to emulate the old behavior by disabling and immediately re-enabling AUX and KBD ports when corresponding serio port is being closed. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Tested-by: NMike Rapoport <mike@compulab.co.il> Acked-by: NEric Miao <eric.y.miao@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Adjust the way 'switch' statements were indented; make sure we stay under 80 ciolumns. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
It seems that many laptops do not fully implement AUX LOOP command in their keyboard controllers, causing issues with touchpad detection. We know however that almost every laptop/portable uses a PS/2 pointing device and, even if user disables it in favor of an external mouse, the system will not use IRQ 12 for anything else. Therefore we may bypass AUX IRQ delivery test when running on a laptop and assume that it is routed properly. Just to be safe we require the box to have good PNP data in order to bypass the test. [Jin Dongming <jin.dongming@np.css.fujitsu.com>: fix crash caused by missing terminator in the DMI table] Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 05 9月, 2009 1 次提交
-
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
- 04 9月, 2009 3 次提交
-
-
由 Dave Andrews 提交于
Compaq Presario R4000-series laptops are not sending a "volume up button release" and "volume down button release" signal in the PS/2 protocol for atkbd. The URL below has some of confirmed reports: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/385477Signed-off-by: NDave Andrews <jetdog330@hotmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
There is no need for locking when we send query and start commands to the touchscreen since there is no concurrency. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
There are more and more laptop requiring use of force_release quirk for their multimedia and other specialized keys. Adding their DMI data to the kernel is not sustainable; instead we will rely on help from userspace (HAL) to do that for us. This patch creates a new 'force_release' sysfs attribute (that belongs to serio device to which keyboard is attached) which can be used to set up force_release keymap. For example, Dell laptop owners might do: echo 133-139,143,147 > /sys/devices/platform/i8042/serio0/force_release Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 02 9月, 2009 1 次提交
-
-
由 wanzongshun 提交于
Add the cpu.c and dev.c and modify w90p910 platform to apply to use the common API(provided by cpu.c and dev.c) at the same time, I renamed all w90x900 to nuc900 in every c file of w90x900 platform and touchscreen's driver name. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 31 8月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
We should first check whether platform data is NULL or not, before dereferencing it to get the keymap. Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-