As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.

  arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
    `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
    `drm_panel_dp_aux_backlight'
  make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1

The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]

v2:
	* fix and expand commit description (Arnd)
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: 9d6366e7 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: NLinux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1]
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/ # [2]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.deSigned-off-by: NDave Airlie <airlied@redhat.com>

Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS helpers and CMA will now automatically enable CMA KMS helpers.

Some drivers' Kconfig files did not correctly select KMS or CMA helpers.
Fix this as part of the change.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de

It adds a DRM panel driver for Sony Tulip Truly NT35521 5.24" 1280x720
DSI panel, which can be found on Sony Xperia M4 Aqua phone.  The panel
backlight is managed through DSI link.

The driver is built using linux-mdss-dsi-panel-driver-generator[1], and
additionally modeling the 5V control GPIOs with regulators and adding
Backlight GPIO support.

[1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generatorSigned-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809051008.6172-3-shawn.guo@linaro.org

This adds support for the BOE BF060Y8M-AJ0 5.99" AMOLED module
that can be found in some F(x)Tec Pro1 and Elephone U1 devices.
Signed-off-by: NAngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173115.998628-1-angelogioacchino.delregno@somainline.org

Add a driver for panels using the Novatek NT35950 Display Driver IC,
including support for the Sharp LS055D1SX04, found in some Sony Xperia
Z5 Premium and XZ Premium smartphones.
Signed-off-by: NAngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: NMarijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-1-angelogioacchino.delregno@somainline.org

Fix the following build/link error by adding a dependency on the CRC32
routines:

  ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe':
  panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le'

Fixes: 17fd7a9d ("drm/panel: Add support for Olimex LCD-OLinuXino panel")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.comSigned-off-by: NDave Airlie <airlied@redhat.com>

This adds support for the JDI R63452 Full HD LCD panel used on the
Xiaomi Mi 5 smartphone, in MIPI DSI command mode.
Signed-off-by: NRaffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210925102911.518038-1-raffaele.tranquillini@gmail.com

Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.
Signed-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-3-dmitry.baryshkov@linaro.org

This reverts commit
223cce88 ("drm/panel: Add support for Sharp LS060T1SX01 panel").

It was pushed to drm-misc-next by accident.
Added my own ack to expedit the revert.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-3-dmitry.baryshkov@linaro.org

Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.
Signed-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-3-dmitry.baryshkov@linaro.org

The panel-simple driver handles way too much. Let's start trying to
get a handle on it by splitting out the eDP panels. This patch does
this:

1. Start by copying simple-panel verbatim over to a new driver,
   simple-panel-edp.
2. Rename "panel_simple" to "panel_edp" in the new driver.
3. Keep only panels marked with `DRM_MODE_CONNECTOR_eDP` in the new
   driver. Remove those panels from the old driver.
4. Remove all recent "DP AUX bus" stuff from the old driver. The DP
   AUX bus is only possible on DP panels.
5. Remove all DSI / MIPI related functions from the new driver.
6. Remove bus_format / bus_flags from eDP driver. These things don't
   seem to make any sense for eDP panels so let's stop filling in made
   up stuff.

In the end we end up with a bunch of duplicated code for now. Future
patches will try to address _some_ of this duplicated code though some
of it will be unavoidable.

NOTE: This may not actually move all eDP panels over to the new driver
since not all panels were properly marked with
`DRM_MODE_CONNECTOR_eDP`. A future patch will attempt to move wayward
panels I could identify but even so there may be some missed.
Suggested-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.7.I0a2f75bb822d17ce06f5b147734764eeb0c3e3df@changeid

This adds a driver for Samsung S6D27A1 display controller and panel.
This panel is found in the Samsung GT-I8160 mobile phone,
and possibly some other mobile phones.

This display needs manufacturer commands to configure it;
the commands used in this driver were taken from downstream driver
by Gareth Phillips; sadly, there is almost no documentation on what they
actually do.

This driver re-uses the DBI infrastructure to communicate with the display.

This driver is heavily based on WideChips WS2401 display controller
driver by Linus Walleij and on other panel drivers for reference.
Signed-off-by: NMarkuss Broks <markuss.broks@gmail.com>
[Up reset out time to 120 ms]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210807133111.5935-3-markuss.broks@gmail.com

This driver combines tiny/ili9341.c mipi_dbi_interface driver
with mipi_dpi_interface driver, can support ili9341 with serial
mode and parallel rgb interface mode by different dts bindings.
Signed-off-by: NDillon Min <dillon.minfei@gmail.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627098243-2742-4-git-send-email-dillon.minfei@gmail.com

The Samsung ATNA33XC20 panel is an AMOLED eDP panel that has backlight
control over the DP AUX channel.

This panel is _almost_ able to be controlled in a "simple" way (and it
originally was implemented in panel-simple.c), but it's really
impossible to get the backlight semantics right there without adding
wacky special-case code to panel-simple. Let's give up and clone the
parts of panel-simple that we need and implement the power sequence
that this panel needs.

NOTE: we'll still leave the devicetree bindings alone. Even though the
power-sequencing is non-standard the bindings are still "simple".
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.6.I3a2900080f8749d2bb4baf49ca902db4b0e1df7d@changeid

This adds a driver for panels based on the WideChips WS2401 display
controller. This display controller is used in the Samsung LMS380KF01
display found in the Samsung GT-I8160 (Codina) mobile phone and
possibly others.

As is common with Samsung displays manufacturer commands are necessary
to configure the display to a working state.

The display optionally supports internal backlight control, but can
also use an external backlight.

This driver re-uses the DBI infrastructure to communicate with the
display.

Cc: phone-devel@vger.kernel.org
Cc: Douglas Anderson <dianders@chromium.org>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714225002.1065107-2-linus.walleij@linaro.org

Add support for the Innolux/Chimei EJ030NA 3.0"
320x480 TFT panel.

This panel can be found in the LDKs, RS97 V2.1 and RG300 (non IPS)
handheld gaming consoles.

While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels in delta arrangement.
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-2-paul@crapouillou.net

The SPI access to s6e63m0 is using the DBI protocol, so switch
to using the elaborate DBI protocol implementation in the DRM
DBI helper library.
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210614181135.1124445-2-linus.walleij@linaro.org

The panel-simple driver can already have devices instantiated as
platform devices or MIPI DSI devices. Let's add a 3rd way to
instantiate it: as DP AUX endpoint devices.

At the moment there is no benefit to instantiating it in this way,
but:
- In the next patch we'll give it access to the DDC channel via the DP
  AUX bus.
- Possibly in the future we may use this channel to configure the
  backlight.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.5.Iada41f76a7342354bae929d0bb3ceba40f27f0ea@changeid

This adds a new driver for the Samsung DB7430 DPI display
controller as controlled over SPI.

Right now the only panel product we know that is using this
display controller is the LMS397KF04 but there may be more.

This is the first regular panel driver making use of the
MIPI DBI helper library. The DBI "device" portions can not
be used because that code assumes the use of a single
regulator and specific timings around the reset pulse that
do not match the DB7430 datasheet.

Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Doug Anderson <dianders@chromium.org>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610220527.366432-1-linus.walleij@linaro.org

Unpreparing and re-preparing a panel can be a really heavy
operation. Panels datasheets often specify something on the order of
500ms as the delay you should insert after turning off the panel
before turning it on again. In addition, turning on a panel can have
delays on the order of 100ms - 200ms before the panel will assert HPD
(AKA "panel ready"). The above means that we should avoid turning a
panel off if we're going to turn it on again shortly.

The above becomes a problem when we want to read the EDID of a
panel. The way that ordering works is that userspace wants to read the
EDID of the panel _before_ fully enabling it so that it can set the
initial mode correctly. However, we can't read the EDID until we power
it up. This leads to code that does this dance (like
ps8640_bridge_get_edid()):

1. When userspace requests EDID / the panel modes (through an ioctl),
   we power on the panel just enough to read the EDID and then power
   it off.
2. Userspace then turns the panel on.

There's likely not much time between step #1 and #2 and so we want to
avoid powering the panel off and on again between those two steps.

Let's use Runtime PM to help us. We'll move the existing prepare() and
unprepare() to be runtime resume() and runtime suspend(). Now when we
want to prepare() or unprepare() we just increment or decrement the
refcount. We'll default to a 1 second autosuspend delay which seems
sane given the typical delays we see for panels.

A few notes:
- It seems the existing unprepare() and prepare() are defined to be
  no-ops if called extra times. We'll preserve that behavior but may
  try to remove it in a future patch.
- This is a slight change in the ABI of simple panel. If something was
  absolutely relying on the unprepare() to happen instantly that
  simply won't be the case anymore. I'm not aware of anyone relying on
  that behavior, but if there is someone then we'll need to figure out
  how to enable (or disable) this new delayed behavior selectively.
- In order for this to work we now have a hard dependency on
  "PM". From memory this is a legit thing to assume these days and we
  don't have to find some fallback to keep working if someone wants to
  build their system without "PM".
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.7.I9e8bd33b49c496745bfac58ea9ab418bd3b6f5ce@changeid

The panel driver is no longer using any OMAP specific APIs, so
let's move it into the generic panel directory.
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-40-tomi.valkeinen@ti.com

This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.

The init values was taken from the vendor source tree, comments were added to the
know values but most of the init table is undocumented.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
[narmstrong: call drm_panel_remove if mipi_dsi_attach fails]
Link: https://patchwork.freedesktop.org/patch/msgid/20201204081949.38418-3-narmstrong@baylibre.com

Add support for the ShenZhen Asia Better Technology Ltd. Y030XX067A 3.0"
320x480 IPS panel.

This panel can be found in the YLM RG-280M, RG-300 and RG-99 handheld
gaming consoles. While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201101093150.8071-5-paul@crapouillou.net

The OnePlus 6/T devices use different panels however they are
functionally identical with the only differences being the resolution.
The panels also don't seem to be used by any other devices, just combine
them into one driver.

The panels are: samsung,sofef00
and             samsung,s6e3fc2x01
Signed-off-by: NCaleb Connolly <caleb@connolly.tech>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-2-caleb@connolly.tech

This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com

Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.

Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.

During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.

With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org

This makes it possible to use the s6e63m0 panel with a
DSI host, such as in the Samsung GT-I8190 (Golden) mobile
phone.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NStephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: NPaul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org

This panel can be accessed using both SPI and DSI.

To make it possible to probe and use the device also from
a DSI bus, first break out the SPI support to its own file.

Since all the panel driver does is write DCS commands to
the panel, we pass a DCS write function to probe()
from each subdriver.

We make the Kconfig entry for SPI mode default so all
current users will continue to work.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NStephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: NPaul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/384873/

The panel uses a Focaltech FT8006p, the touch part is handled by the
already existing edt-ft5x06.
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/118c6e03dd0ff6e86e495579102cbf7d0cfca6f4.1597652012.git.agx@sigxcpu.org

This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.

This is just a basic file rename, with no code changes.
Signed-off-by: NOndrej Jirman <megous@megous.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: NGuido Günther <agx@sigxcpu.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-5-megous@megous.com

This adds support for TMP5P5 NT35596 1080x1920 video
mode panel that can be found on some Asus Zenfone 2
Laser (Z00T) devices.

This panel seems to only be found in this device
and we have no straightforward way of actually
getting the correct model number, as no schematics
are released publicly.
Signed-off-by: NKonrad Dybcio <konradybcio@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-2-konradybcio@gmail.com

Add support for Visionox rm69299 panel.
Signed-off-by: NHarigovindan P <harigovi@codeaurora.org>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
[fix checkpatch warnings, added sentinel ]
Link: https://patchwork.freedesktop.org/patch/msgid/20200421045508.21137-2-harigovi@codeaurora.org

The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.

They differ in their init sequence and mode details.

changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam
Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de

Panel driver for the KD35T133 display from Elida, used for example
in the rk3326-based Odroid Go Advance handheld.

changes in v3:
- add missing return value assignment (Francesco)
- re-sort header includes (Sam)
changes in v2:
- rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor
  the underlying mipi_dsi_dcs_write (Robin)
Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-3-heiko@sntech.de

This adds a driver for panels based on the Novatek NT35510
display driver IC, such as the Hydis HVA40WV1 panel found
in the Samsung GT-S7710.

The NT35510 can be used with both internal and external
backlight (such as GPIO backlight) so we support both:
if no external backlight is found, we register a subdriver
for the internal backlight.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223121841.26836-3-linus.walleij@linaro.org

Add driver for Samsung AMS452EF01 AMOLED panel, which makes
use of their S6E88A0 controller.
Signed-off-by: NMichael Srba <Michael.Srba@seznam.cz>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings, added changelog]
Link: https://patchwork.freedesktop.org/patch/msgid/20200130203555.316-2-michael.srba@seznam.cz

Feixin K101 IM2BA02 is a 800x1280 4-lane MIPI-DSI LCD panel.

Add a panel driver for it.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116033636.512461-4-icenowy@aosc.io

Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: NJitao Shi <jitao.shi@mediatek.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com

Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel.
Signed-off-by: NJitao Shi <jitao.shi@mediatek.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com

The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org