Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 28 10月, 2015 1 次提交
    • W
      perf tools: Enable pre-event inherit setting by config terms · 374ce938
      由 Wang Nan 提交于 
      This patch allows perf record setting event's attr.inherit bit by
config terms like:

  # perf record -e cycles/no-inherit/ ...
  # perf record -e cycles/inherit/ ...

So user can control inherit bit for each event separately.

In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.

Basic result with and without inherit:

  # perf record -e cycles -e instructions ./a.out
  [ perf record: Woken up 9 times to write data ]
  [ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
  # perf report --stdio
  # ...
  # Samples: 23K of event 'cycles'
  # Event count (approx.): 23641752891
  ...
  # Samples: 24K of event 'instructions'
  # Event count (approx.): 30428312415

  # perf record -i -e cycles -e instructions ./a.out
  [ perf record: Woken up 5 times to write data ]
  [ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
  ...
  # Samples: 12K of event 'cycles'
  # Event count (approx.): 11699501775
  ...
  # Samples: 12K of event 'instructions'
  # Event count (approx.): 15058023559

Cancel inherit for one event when globally enable:

  # perf record -e cycles/no-inherit/ -e instructions ./a.out
  [ perf record: Woken up 7 times to write data ]
  [ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
  ...
  # Samples: 12K of event 'cycles/no-inherit/'
  # Event count (approx.): 11895759282
 ...
  # Samples: 24K of event 'instructions'
  # Event count (approx.): 30668000441

Enable inherit for one event when globally disable:

  # perf record -i -e cycles/inherit/ -e instructions ./a.out
  [ perf record: Woken up 7 times to write data ]
  [ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
  ...
  # Samples: 23K of event 'cycles/inherit/'
  # Event count (approx.): 23285400229
  ...
  # Samples: 11K of event 'instructions'
  # Event count (approx.): 14969050259

Committer note:

One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:

  # perf record -e cycles -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #

So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:

  # perf record --no-inherit -e cycles -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1

No inherit bit set, then disabling it and setting just on the cycles event:

  # perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
  # perf evlist -v
  cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #

We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:

  [root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|ID|CPU|PERIOD
    read_format                      ID
    disabled                         1
    inherit                          1
    mmap                             1
    comm                             1
    freq                             1
    task                             1
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
  ------------------------------------------------------------
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    config                           0x1
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|ID|CPU|PERIOD
    read_format                      ID
    disabled                         1
    freq                             1
    sample_id_all                    1
    exclude_guest                    1
  ------------------------------------------------------------
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8

<SNIP>
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      374ce938
  3. 06 10月, 2015 2 次提交
  5. 01 10月, 2015 2 次提交
  7. 29 9月, 2015 3 次提交
    • H
      perf tools: Enable event_config terms to tracepoint events · e637d177
      由 He Kuang 提交于 
      This patch enables config terms for tracepoint perf events. Valid terms
for tracepoint events are 'call-graph' and 'stack-size', so we can use
different callgraph settings for each event and eliminate unnecessary
overhead.

Here is an example for using different call-graph config for each
tracepoint.

  $ perf record -e syscalls:sys_enter_write/call-graph=fp/
                -e syscalls:sys_exit_write/call-graph=no/
                dd if=/dev/zero of=test bs=4k count=10

  $ perf report --stdio

  #
  # Total Lost Samples: 0
  #
  # Samples: 13  of event 'syscalls:sys_enter_write'
  # Event count (approx.): 13
  #
  # Children      Self  Command  Shared Object       Symbol
  # ........  ........  .......  ..................  ......................
  #
      76.92%    76.92%  dd       libpthread-2.20.so  [.] __write_nocancel
                   |
                   ---__write_nocancel

      23.08%    23.08%  dd       libc-2.20.so        [.] write
                   |
                   ---write
                      |
                      |--33.33%-- 0x2031342820736574
                      |
                      |--33.33%-- 0xa6e69207364726f
                      |
                       --33.33%-- 0x34202c7320393039
  ...

  # Samples: 13  of event 'syscalls:sys_exit_write'
  # Event count (approx.): 13
  #
  # Children      Self  Command  Shared Object       Symbol
  # ........  ........  .......  ..................  ......................
  #
      76.92%    76.92%  dd       libpthread-2.20.so  [.] __write_nocancel
      23.08%    23.08%  dd       libc-2.20.so        [.] write
       7.69%     0.00%  dd       [unknown]           [.] 0x0a6e69207364726f
       7.69%     0.00%  dd       [unknown]           [.] 0x2031342820736574
       7.69%     0.00%  dd       [unknown]           [.] 0x34202c7320393039
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-4-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e637d177
    • H
      perf tools: Show proper error message for wrong terms of hw/sw events · ffeb883e
      由 He Kuang 提交于 
      Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.

This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.

Before this patch:

  $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
  invalid or unsupported event: 'cpu-clock/freqx=200/'
  Run 'perf list' for a list of valid events

   usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

After this patch:

  $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
  event syntax error: 'cpu-clock/freqx=200/'
                                 \___ unknown term

  valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size

  Run 'perf list' for a list of valid events

   usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ffeb883e
    • H
      perf tools: Adds the config_term callback for different type events · 0b8891a8
      由 He Kuang 提交于 
      Currently, function config_term() is used for checking config terms of
all types of events, while unknown terms is not reported as an error
because pmu events have valid terms in sysfs.

But this is wrong when unknown terms are specificed to hw/sw events.
This patch Adds the config_term callback so we can use separate check
routines for each type of events.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0b8891a8
  9. 22 9月, 2015 1 次提交
  11. 15 9月, 2015 5 次提交
  13. 04 9月, 2015 1 次提交
  15. 13 8月, 2015 1 次提交
    • K
      perf callchain: Per-event type selection support · d457c963
      由 Kan Liang 提交于 
      This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.

Here is an example.

  perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1

 perf evlist -v
 cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
 config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
 IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
 inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
 cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
 sample_period, sample_freq }: 4000, sample_type:
 IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
 disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
 exclude_guest: 1
Signed-off-by: NKan Liang <kan.liang@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d457c963
  17. 11 8月, 2015 1 次提交
  19. 07 8月, 2015 1 次提交
  21. 05 8月, 2015 1 次提交
  23. 30 7月, 2015 2 次提交
  25. 21 7月, 2015 2 次提交
    • W
      perf record: Allow filtering perf's pid via --exclude-perf · 4ba1faa1
      由 Wang Nan 提交于 
      This patch allows 'perf record' to exclude events issued by perf itself
by '--exclude-perf' option.

Before this patch, when doing something like:

 # perf record -a -e syscalls:sys_enter_write <cmd>

One could easily get result like this:

 # /tmp/perf report --stdio
 ...
  # Overhead  Command  Shared Object       Symbol
  # ........  .......  ..................  ....................
  #
      99.99%  perf     libpthread-2.18.so  [.] __write_nocancel
      0.01%   ls       libc-2.18.so        [.] write
      0.01%   sshd     libc-2.18.so        [.] write
 ...

Where most events are generated by perf itself.

A shell trick can be done to filter perf itself out:

 # cat << EOF > ./tmp
 > #!/bin/sh
 > exec perf record -e ... --filter="common_pid != \$\$" -a sleep 10
 > EOF
 # chmod a+x ./tmp
 # ./tmp

However, doing so is user unfriendly.

This patch extracts evsel iteration framework introduced by patch 'perf
record: Apply filter to all events in a glob matching' into
foreach_evsel_in_last_glob(), and makes exclude_perf() function append
new filter expression to each evsel selected by a '-e' selector.

To avoid losing filters if user pass '--filter' after '--exclude-perf',
this patch uses perf_evsel__append_filter() in both case, instead of
perf_evsel__set_filter() which removes old filter. As a side effect, now
it is possible to use multiple '--filter' option for one selector. They
are combinded with '&&'.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4ba1faa1
    • W
      perf record: Apply filter to all events in a glob matching · 15bfd2cc
      由 Wang Nan 提交于 
      There is an old problem in perf's filter applying which first posted at
Sep. 2014 at https://lkml.org/lkml/2014/9/9/944 that, if passing
multiple events in a glob matching expression in cmdline then add
'--filter' after them, the filter will be applied on only the last one.

For example:

 # dd if=/dev/zero of=/dev/null &
 [1] 464
 # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.239 MB perf.data (2094 samples) ]
 # perf report --stdio | tee
 ...
 # Samples: 2K of event 'syscalls:sys_enter_read'
 # Event count (approx.): 2092
 ...
 # Samples: 2  of event 'syscalls:sys_exit_read'
 # Event count (approx.): 2
 ...

In this example, filter only applied on 'syscalls:sys_exit_read', and
there's no way to set filter for ''syscalls:sys_enter_read'.

This patch adds a 'cmdline_group_boundary' for 'struct evsel', and
apply filter on all events between two boundary marks.

After applying this patch:

 # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.031 MB perf.data (3 samples) ]
 # perf report --stdio | tee
 ...
 # Samples: 1  of event 'syscalls:sys_enter_read'
 # Event count (approx.): 1
 ...
 # Samples: 2  of event 'syscalls:sys_exit_read'
 # Event count (approx.): 2
 ...
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Reported-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      15bfd2cc
  27. 06 7月, 2015 1 次提交
  29. 26 6月, 2015 1 次提交
  31. 27 5月, 2015 2 次提交
  33. 29 4月, 2015 7 次提交
  35. 08 4月, 2015 1 次提交
  37. 28 2月, 2015 2 次提交
    • Y
      perf list: Clean up the printing functions of hardware/software events · 705750f2
      由 Yunlong Song 提交于 
      Do not need print_events_type or __print_events_type for listing hw/sw
events, let print_symbol_events do its job instead. Moreover,
print_symbol_events can also handle event_glob and name_only.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-4-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      705750f2
    • Y
      perf list: Sort the output of 'perf list' to view more clearly · ab0e4800
      由 Yunlong Song 提交于 
      Sort the output according to ASCII character list (using strcmp), which
supports both number sequence and alphabet sequence.

Example:

Before this patch:

 $ perf list

 List of pre-defined events (to be used in -e):
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   cache-references                                   [Hardware event]
   cache-misses                                       [Hardware event]
   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   ...                                                ...

   jbd2:jbd2_start_commit                             [Tracepoint event]
   jbd2:jbd2_commit_locking                           [Tracepoint event]
   jbd2:jbd2_run_stats                                [Tracepoint event]
   block:block_rq_issue                               [Tracepoint event]
   block:block_bio_complete                           [Tracepoint event]
   block:block_bio_backmerge                          [Tracepoint event]
   block:block_getrq                                  [Tracepoint event]
   ...                                                ...

After this patch:

 $ perf list

 List of pre-defined events (to be used in -e):
   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   cache-misses                                       [Hardware event]
   cache-references                                   [Hardware event]
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   ...                                                ...

   block:block_bio_backmerge                          [Tracepoint event]
   block:block_bio_complete                           [Tracepoint event]
   block:block_getrq                                  [Tracepoint event]
   block:block_rq_issue                               [Tracepoint event]
   jbd2:jbd2_commit_locking                           [Tracepoint event]
   jbd2:jbd2_run_stats                                [Tracepoint event]
   jbd2:jbd2_start_commit                             [Tracepoint event]
   ...                                                ...
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-2-git-send-email-yunlong.song@huawei.com
[ Don't forget closedir({sys,evt}_dir) when handling errors ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ab0e4800
  39. 13 2月, 2015 1 次提交
    • Y
      perf list: Place the header text in its right position · 619a303c
      由 Yunlong Song 提交于 
      The hearer text 'List of pre-defined events (to be used in -e):' is
placed in an improper function, which causes an abnormal output, e.g.
'perf list hw' shows no guiding text at all, and 'perf list hw
L1-dcache*' shows the guiding text incorrectly in the middle of the
output.

Example
Before this patch:

 $ perf list hw L1-dcache*

   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   cache-misses                                       [Hardware event]
   cache-references                                   [Hardware event]
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   stalled-cycles-backend OR idle-cycles-backend      [Hardware event]
   stalled-cycles-frontend OR idle-cycles-frontend    [Hardware event]

 List of pre-defined events (to be used in -e):              <-- incorrect position
   L1-dcache-load-misses                              [Hardware cache event]
   L1-dcache-loads                                    [Hardware cache event]
   L1-dcache-prefetch-misses                          [Hardware cache event]
   L1-dcache-prefetches                               [Hardware cache event]
   L1-dcache-store-misses                             [Hardware cache event]
   L1-dcache-stores                                   [Hardware cache event]

After this patch:

 $ perf list hw L1-dcache*

 List of pre-defined events (to be used in -e):              <-- correct position

   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   cache-misses                                       [Hardware event]
   cache-references                                   [Hardware event]
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   stalled-cycles-backend OR idle-cycles-backend      [Hardware event]
   stalled-cycles-frontend OR idle-cycles-frontend    [Hardware event]

   L1-dcache-load-misses                              [Hardware cache event]
   L1-dcache-loads                                    [Hardware cache event]
   L1-dcache-prefetch-misses                          [Hardware cache event]
   L1-dcache-prefetches                               [Hardware cache event]
   L1-dcache-store-misses                             [Hardware cache event]
   L1-dcache-stores                                   [Hardware cache event]
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423833115-11199-8-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      619a303c
  41. 07 2月, 2015 1 次提交
  43. 22 1月, 2015 1 次提交