Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 30 11月, 2017 2 次提交
  3. 29 11月, 2017 2 次提交
    • A
      perf record: Ignore kptr_restrict when not sampling the kernel · b0ebd811
      由 Arnaldo Carvalho de Melo 提交于 
      If we're not sampling the kernel, we shouldn't care about kptr_restrict
neither synthesize anything for assisting in resolving kernel samples,
like the reference relocation symbol or kernel modules information.

Before:

  $ cat /proc/sys/kernel/kptr_restrict /proc/sys/kernel/perf_event_paranoid
  2
  2
  $ perf record sleep 1
  WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,
  check /proc/sys/kernel/kptr_restrict.

  Samples in kernel functions may not be resolved if a suitable vmlinux
  file is not found in the buildid cache or in the vmlinux path.

  Samples in kernel modules won't be resolved at all.

  If some relocation was applied (e.g. kexec) symbols may be misresolved
  even with a suitable vmlinux or kallsyms file.

  Couldn't record kernel reference relocation symbol
  Symbol resolution may be skewed if relocation was used (e.g. kexec).
  Check /proc/kallsyms permission or run as root.
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
  $ perf evlist -v
  cycles:uppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  $

After:

  $ perf record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (10 samples) ]
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t025e9zftbx2b8cq2w01g5e5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b0ebd811
    • A
      perf record: Generate PERF_RECORD_{MMAP,COMM,EXEC} with --delay · dffdcbdb
      由 Arnaldo Carvalho de Melo 提交于 
      When we use an initial delay, e.g.: 'perf record --delay 1000', we do not
enable the events until that delay has passed after we started the workload,
including the tracking event, i.e. the one for which we have attr.mmap, etc,
enabled to ask the kernel to generate the PERF_RECORD_{MMAP,COMM,EXEC} metadata
events that will then allow us to resolve addresses in samples to the map, dso
and symbol. There will be a shadow that even synthesizing samples won't cover,
i.e. the workload that we start and other processes forking while we
wait for the initial delay to expire.

So use a dummy event to be the tracking one and make it be enabled on exec.

Before:

  # perf record --delay 1000 stress --cpu 1 --timeout 5
  stress: info: [9029] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [9029] successful run completed in 5s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.624 MB perf.data (15908 samples) ]
  # perf script | head
      :9031 9031 32001.826888:       1 cycles:ppp: ffffffff831aa30d event_function (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826893:       1 cycles:ppp: ffffffff8300d1a0 intel_bts_enable_local (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826895:       7 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826897:     103 cycles:ppp: ffffffff8300c331 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826899:    1615 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826902:   26724 cycles:ppp: ffffffff8384c6a7 native_irq_return_iret (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826913:  329739 cycles:ppp:     7fb2a5410932 [unknown] ([unknown])
      :9031 9031 32001.827033: 1225451 cycles:ppp:     7fb2a5410930 [unknown] ([unknown])
      :9031 9031 32001.827474: 1391725 cycles:ppp:     7fb2a5410930 [unknown] ([unknown])
      :9031 9031 32001.827978: 1233697 cycles:ppp:     7fb2a5410928 [unknown] ([unknown])
  #

After:

  # perf record --delay 1000 stress --cpu 1 --timeout 5
  stress: info: [9741] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [9741] successful run completed in 5s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.751 MB perf.data (15976 samples) ]
  # perf script | head
     stress  9742 32110.959106:          1 cycles:ppp:  ffffffff831b26f6 __perf_event_task_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959110:       1 cycles:ppp: ffffffff8300c2e9 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959112:       7 cycles:ppp: ffffffff830231e0 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959115:     101 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959117:    1533 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959119:   23992 cycles:ppp: ffffffff831b0900 ctx_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959129:  329406 cycles:ppp:     7f4b1b661930 __random_r (/usr/lib64/libc-2.25.so)
     stress 9742 32110.959249: 1288322 cycles:ppp:     5566e1e7cbc9 hogcpu (/usr/bin/stress)
     stress 9742 32110.959712: 1464046 cycles:ppp:     7f4b1b66179e __random (/usr/lib64/libc-2.25.so)
     stress 9742 32110.960241: 1266918 cycles:ppp:     7f4b1b66195b __random_r (/usr/lib64/libc-2.25.so)
  #
Reported-by: NBram Stolk <b.stolk@gmail.com>
Tested-by: NBram Stolk <b.stolk@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 6619a53e ("perf record: Add --initial-delay option")
Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      dffdcbdb
  5. 17 11月, 2017 1 次提交
    • A
      perf record: Ignore kptr_restrict when not sampling the kernel · 6c443954
      由 Arnaldo Carvalho de Melo 提交于 
      If we're not sampling the kernel, we shouldn't care about kptr_restrict
neither synthesize anything for assisting in resolving kernel samples,
like the reference relocation symbol or kernel modules information.

Before:

  $ cat /proc/sys/kernel/kptr_restrict /proc/sys/kernel/perf_event_paranoid
  2
  2
  $ perf record sleep 1
  WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,
  check /proc/sys/kernel/kptr_restrict.

  Samples in kernel functions may not be resolved if a suitable vmlinux
  file is not found in the buildid cache or in the vmlinux path.

  Samples in kernel modules won't be resolved at all.

  If some relocation was applied (e.g. kexec) symbols may be misresolved
  even with a suitable vmlinux or kallsyms file.

  Couldn't record kernel reference relocation symbol
  Symbol resolution may be skewed if relocation was used (e.g. kexec).
  Check /proc/kallsyms permission or run as root.
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
  $ perf evlist -v
  cycles:uppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  $

After:

  $ perf record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (10 samples) ]
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t025e9zftbx2b8cq2w01g5e5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6c443954
  7. 13 11月, 2017 1 次提交
    • A
      perf record: Generate PERF_RECORD_{MMAP,COMM,EXEC} with --delay · d3dbf43c
      由 Arnaldo Carvalho de Melo 提交于 
      When we use an initial delay, e.g.: 'perf record --delay 1000', we do not
enable the events until that delay has passed after we started the workload,
including the tracking event, i.e. the one for which we have attr.mmap, etc,
enabled to ask the kernel to generate the PERF_RECORD_{MMAP,COMM,EXEC} metadata
events that will then allow us to resolve addresses in samples to the map, dso
and symbol. There will be a shadow that even synthesizing samples won't cover,
i.e. the workload that we start and other processes forking while we
wait for the initial delay to expire.

So use a dummy event to be the tracking one and make it be enabled on exec.

Before:

  # perf record --delay 1000 stress --cpu 1 --timeout 5
  stress: info: [9029] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [9029] successful run completed in 5s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.624 MB perf.data (15908 samples) ]
  # perf script | head
      :9031 9031 32001.826888:       1 cycles:ppp: ffffffff831aa30d event_function (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826893:       1 cycles:ppp: ffffffff8300d1a0 intel_bts_enable_local (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826895:       7 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826897:     103 cycles:ppp: ffffffff8300c331 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826899:    1615 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826902:   26724 cycles:ppp: ffffffff8384c6a7 native_irq_return_iret (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826913:  329739 cycles:ppp:     7fb2a5410932 [unknown] ([unknown])
      :9031 9031 32001.827033: 1225451 cycles:ppp:     7fb2a5410930 [unknown] ([unknown])
      :9031 9031 32001.827474: 1391725 cycles:ppp:     7fb2a5410930 [unknown] ([unknown])
      :9031 9031 32001.827978: 1233697 cycles:ppp:     7fb2a5410928 [unknown] ([unknown])
  #

After:

  # perf record --delay 1000 stress --cpu 1 --timeout 5
  stress: info: [9741] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [9741] successful run completed in 5s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.751 MB perf.data (15976 samples) ]
  # perf script | head
     stress  9742 32110.959106:          1 cycles:ppp:  ffffffff831b26f6 __perf_event_task_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959110:       1 cycles:ppp: ffffffff8300c2e9 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959112:       7 cycles:ppp: ffffffff830231e0 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959115:     101 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959117:    1533 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959119:   23992 cycles:ppp: ffffffff831b0900 ctx_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959129:  329406 cycles:ppp:     7f4b1b661930 __random_r (/usr/lib64/libc-2.25.so)
     stress 9742 32110.959249: 1288322 cycles:ppp:     5566e1e7cbc9 hogcpu (/usr/bin/stress)
     stress 9742 32110.959712: 1464046 cycles:ppp:     7f4b1b66179e __random (/usr/lib64/libc-2.25.so)
     stress 9742 32110.960241: 1266918 cycles:ppp:     7f4b1b66195b __random_r (/usr/lib64/libc-2.25.so)
  #
Reported-by: NBram Stolk <b.stolk@gmail.com>
Tested-by: NBram Stolk <b.stolk@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 6619a53e ("perf record: Add --initial-delay option")
Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d3dbf43c
  9. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  11. 31 10月, 2017 2 次提交
  13. 23 10月, 2017 2 次提交
  15. 03 10月, 2017 1 次提交
    • K
      perf top: Implement multithreading for perf_event__synthesize_threads · 340b47f5
      由 Kan Liang 提交于 
      The proc files which is sorted with alphabetical order are evenly
assigned to several synthesize threads to be processed in parallel.

For 'perf top', the threads number hard code to online CPU number. The
following patch will introduce an option to set it.

For other perf tools, the thread number is 1. Because the process
function is not ready for multithreading, e.g.
process_synthesized_event.

This patch series only support event synthesize multithreading for 'perf
top'. For other tools, it can be done separately later.

With multithread applied, the total processing time can get up to 1.56x
speedup on Knights Mill for 'perf top'.

For specific single event processing, the processing time could increase
because of the lock contention. So proc_map_timeout may need to be
increased. Otherwise some proc maps will be truncated.

Based on my test, increasing the proc_map_timeout has small impact
on the total processing time. The total processing time still get 1.49x
speedup on Knights Mill after increasing the proc_map_timeout.
The patch itself doesn't increase the proc_map_timeout.

Doesn't need to implement multithreading for per task monitoring,
perf_event__synthesize_thread_map. It doesn't have performance issue.

Committer testing:

  # getconf _NPROCESSORS_ONLN
  4
  # perf trace --no-inherit -e clone -o /tmp/output perf top
  # tail -4 /tmp/bla
     0.124 ( 0.041 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eb3a8f30, parent_tidptr: 0x7fc3eb3a99d0, child_tidptr: 0x7fc3eb3a99d0, tls: 0x7fc3eb3a9700) = 9548 (perf)
     0.246 ( 0.023 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eaba7f30, parent_tidptr: 0x7fc3eaba89d0, child_tidptr: 0x7fc3eaba89d0, tls: 0x7fc3eaba8700) = 9549 (perf)
     0.286 ( 0.019 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9550 (perf)
   246.540 ( 0.047 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9551 (perf)
  #
Signed-off-by: NKan Liang <kan.liang@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-4-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      340b47f5
  17. 13 9月, 2017 1 次提交
  19. 02 9月, 2017 1 次提交
  21. 19 7月, 2017 2 次提交
    • D
      perf tools: Add feature header record to pipe-mode · e9def1b2
      由 David Carrillo-Cisneros 提交于 
      Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.

For alignment, check that synthesized events don't exceed
pagesize.

Add the perf_event__synthesize_feature event call back to
process the new header records.

Before this patch:

  $ perf record -o - -e cycles sleep 1 | perf report --stdio --header
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  ...

After this patch:
  $ perf record -o - -e cycles sleep 1 | perf report --stdio --header
  # ========
  # captured on: Mon May 22 16:33:43 2017
  # ========
  #
  # hostname : my_hostname
  # os release : 4.11.0-dbx-up_perf
  # perf version : 4.11.rc6.g6277c80
  # arch : x86_64
  # nrcpus online : 72
  # nrcpus avail : 72
  # cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
  # cpuid : GenuineIntel,6,63,2
  # total memory : 263457192 kB
  # cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
  # HEADER_CPU_TOPOLOGY info available, use -I to display
  # HEADER_NUMA_TOPOLOGY info available, use -I to display
  # pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  ...

Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e9def1b2
    • A
      perf record: Do not ask for precise_ip with --no-samples · 4b4cd503
      由 Arnaldo Carvalho de Melo 提交于 
      When the user doesn't specify an event with -e/--event, 'perf record'
will use as a default the "cycles" event with the highest level of
precision in perf_event_attr.precise_ip, but --no-samples, if present,
is incompatible with precise_ip != 0, so use the newly introduced
__perf_event__add_default(precise = false) to fix that:

Before:

  # perf record -n usleep 1
  Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles:ppp).
  /bin/dmesg may provide additional information.
  No CONFIG_PERF_EVENTS=y kernel support configured?
  #

After:

  # perf record -n usleep 1
  Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data ]
  [root@jouet /]# perf evlist -v
  cycles: size: 112, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  [root@jouet /]#
Reported-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q991fw6s6rhjvrd5ye4t7qom@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4b4cd503
  23. 27 6月, 2017 1 次提交
  25. 25 4月, 2017 1 次提交
  27. 21 4月, 2017 3 次提交
  29. 20 4月, 2017 2 次提交
  31. 27 3月, 2017 1 次提交
  33. 15 3月, 2017 1 次提交
    • H
      perf record: Synthesize namespace events for current processes · e907caf3
      由 Hari Bathini 提交于 
      Synthesize PERF_RECORD_NAMESPACES events for processes that were running prior
to invocation of perf record. The data for this is taken from /proc/$PID/ns.
These changes make way for analyzing events with regard to namespaces.

Committer notes:

Check if 'tool' is NULL in perf_event__synthesize_namespaces(), as in the
test__mmap_thread_lookup case, i.e. 'perf test Lookup mmap thread".

Testing it:

  # ps axH > /tmp/allthreads
  # perf record -a --namespaces usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.169 MB perf.data (8 samples) ]
  # perf report -D | grep PERF_RECORD_NAMESPACES | wc -l
  602
  # wc -l /tmp/allthreads
  601 /tmp/allthreads
  # tail /tmp/allthreads
  16951 pts/4    T      0:00 git rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^
  16952 pts/4    T      0:00 /bin/sh /usr/libexec/git-core/git-rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^
  17176 pts/4    T      0:00 git commit --amend --no-post-rewrite
  17204 pts/4    T      0:00 vim /home/acme/git/linux/.git/COMMIT_EDITMSG
  18939 ?        S      0:00 [kworker/2:1]
  18947 ?        S      0:00 [kworker/3:0]
  18974 ?        S      0:00 [kworker/1:0]
  19047 ?        S      0:00 [kworker/0:1]
  19152 pts/6    S+     0:00 weechat
  19153 pts/7    R+     0:00 ps axH
  # perf report -D | grep PERF_RECORD_NAMESPACES | tail
  0 0 0x125068 [0xa0]: PERF_RECORD_NAMESPACES 17176/17176 - nr_namespaces: 7
  0 0 0x1255b8 [0xa0]: PERF_RECORD_NAMESPACES 17204/17204 - nr_namespaces: 7
  0 0 0x125df0 [0xa0]: PERF_RECORD_NAMESPACES 18939/18939 - nr_namespaces: 7
  0 0 0x125f00 [0xa0]: PERF_RECORD_NAMESPACES 18947/18947 - nr_namespaces: 7
  0 0 0x126010 [0xa0]: PERF_RECORD_NAMESPACES 18974/18974 - nr_namespaces: 7
  0 0 0x126120 [0xa0]: PERF_RECORD_NAMESPACES 19047/19047 - nr_namespaces: 7
  0 0 0x126230 [0xa0]: PERF_RECORD_NAMESPACES 19152/19152 - nr_namespaces: 7
  0 0 0x129330 [0xa0]: PERF_RECORD_NAMESPACES 19154/19154 - nr_namespaces: 7
  0 0 0x12a1f8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
  0 0 0x12b0b8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
  #

Humm, investigate why we got two record for the 19155 pid/tid...
Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891931111.25309.11073854609798681633.stgit@hbathini.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e907caf3
  35. 14 3月, 2017 1 次提交
    • H
      perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info · f3b3614a
      由 Hari Bathini 提交于 
      Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.

Committer notes:

Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.

Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:

  util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
     ret  += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
                                         ^
Testing it:

  # perf record --namespaces -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
  #
  # perf report -D
  <SNIP>
  3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
                [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
                 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]

  0x1151e0 [0x30]: event: 9
  .
  . ... raw event: size 48 bytes
  .  0000:  09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00  ......0..q.h....
  .  0010:  a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00  .9...9...(.c....
  .  0020:  03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00  ................
  <SNIP>
        NAMESPACES events:          1
  <SNIP>
  #
Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f3b3614a
  37. 20 2月, 2017 2 次提交
  39. 18 2月, 2017 1 次提交
  41. 15 2月, 2017 1 次提交
  43. 14 2月, 2017 1 次提交
  45. 27 1月, 2017 1 次提交
    • A
      perf tools: Propagate perf_config() errors · ecc4c561
      由 Arnaldo Carvalho de Melo 提交于 
      Previously these were being ignored, sometimes silently.

Stop doing that, emitting debug messages and handling the errors.

Testing it:

  $ cat ~/.perfconfig
  cat: /home/acme/.perfconfig: No such file or directory
  $ perf stat -e cycles usleep 1

   Performance counter stats for 'usleep 1':

           938,996      cycles:u

       0.003813731 seconds time elapsed

  $ perf top --stdio
  Error:
  You may not have permission to collect system-wide stats.

  Consider tweaking /proc/sys/kernel/perf_event_paranoid,
  <SNIP>
  [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ]
  [acme@jouet linux]$ perf report --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  # Overhead  Command  Shared Object      Symbol
  # ........  .......  .................  .........................
    71.77%  usleep   libc-2.24.so       [.] _dl_addr
    27.07%  usleep   ld-2.24.so         [.] _dl_next_ld_env_entry
     1.13%  usleep   [kernel.kallsyms]  [k] page_fault
  $
  $ touch ~/.perfconfig
  $ ls -la ~/.perfconfig
  -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig
  $
  $ perf stat -e instructions usleep 1

   Performance counter stats for 'usleep 1':

           244,610      instructions:u

       0.000805383 seconds time elapsed

  $
  [root@jouet ~]# chown acme.acme ~/.perfconfig
  [root@jouet ~]# perf stat -e cycles usleep 1
    Warning: File /root/.perfconfig not owned by current user or root, ignoring it.

   Performance counter stats for 'usleep 1':

           937,615      cycles

       0.000836931 seconds time elapsed
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ecc4c561
  47. 12 1月, 2017 5 次提交
  49. 03 1月, 2017 2 次提交
  51. 16 12月, 2016 1 次提交
    • J
      perf record: Force ignore_missing_thread for uid option · 23dc4f15
      由 Jiri Olsa 提交于 
      Enable perf_evsel::ignore_missing_thread for -u option to ignore
complete failure if any of the user's processes die between its
enumeration and time we open the event.

Committer notes:

While doing a 'make -j4 allmodconfig' we sometimes get into the race:

Before:

  # perf record -u acme
  Error:
  The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:ppp).
  /bin/dmesg may provide additional information.
  No CONFIG_PERF_EVENTS=y kernel support configured?
  #

After:

  [root@jouet ~]# perf record -u acme
  WARNING: Ignored open failure for pid 9888
  WARNING: Ignored open failure for pid 18059
  [root@jouet ~]#

Which is an improvement, with the races not preventing the remaining threads
for the specified user from being monitored, but the message probably needs
further clarification.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      23dc4f15