When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.

Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.

Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device().  Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().

Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.

Link: https://lore.kernel.org/r/20210602133029.2864069-2-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Apparently some arrays are now returning "HPE" as the vendor.

Link: https://lore.kernel.org/r/20210601175214.25719-1-emilne@redhat.comSigned-off-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some MediaTek SoC platforms with UFSHCI version below 3.0 have incorrect
UFSHCI versions showed in register map.

Fix the version by referring to UniPro version which is always correct.

Link: https://lore.kernel.org/r/20210531062642.12642-1-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Do not drop reference count on vn_port->host in qedf_vport_create()
unconditionally. Instead drop the reference count in qedf_vport_destroy().

Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.deReported-by: NJaved Hasan <jhasan@marvell.com>
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The abort_cmd_ia flag in an abort wqe describes whether an ABTS basic link
service should be transmitted on the FC link or not.  Code added in
lpfc_sli4_issue_abort_iotag() set the abort_cmd_ia flag incorrectly,
surpressing ABTS transmission.

A previous LPFC change to build an abort wqe inverted prior logic that
determined whether an ABTS was to be issued on the FC link.

Revert this logic to its proper state.

Link: https://lore.kernel.org/r/20210528212240.11387-1-jsmart2021@gmail.com
Fixes: db7531d2 ("scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the
interrupts, a call to irqs_disabled() will return false thus firing a
warning in __transport_wait_for_tasks().

Remove the warning and also replace assert_spin_locked() with
lockdep_assert_held()

Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.comReviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.

TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.

WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:

NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR  qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR  qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR  qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn

The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.

Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.comReviewed-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: NDmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

irqs allocated with devm_request_irq() should not be freed using
free_irq(). Doing so causes a dangling pointer and a subsequent double
free.

Link: https://lore.kernel.org/r/20210519130519.2661938-1-yangyingliang@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Acked-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some commands (such as INQUIRY) may return less data than the initiator
requested. To avoid conducting useless information, set the right residual
count to make upper layer aware of this.

Before (INQUIRY PAGE 0xB0 with 128B buffer):

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 128 bytes of data:
 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

After:

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 64 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

[mkp: clarified description]

Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.comSigned-off-by: NMatt Wang <wwentao@vmware.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Return failure from bnx2fc_eh_abort() if io_req is already in ABTS
processing.

Link: https://lore.kernel.org/r/20210519061416.19321-1-jhasan@marvell.comReviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NJaved Hasan <jhasan@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Building aicasm with gcc 10.2 + gas 26.1 causes these errors:

  multiple definition of `args';
  multiple definition of `yylineno';

args came from the expansion of:

  STAILQ_HEAD(macro_arg_list, macro_arg) args;

The definition of the macro_arg_list structure is needed, the global
variable 'args' is not, so delete it.

yylineno is defined by flex, so defining it in bison/*.y file is not
needed. Also delete this.

Link: https://lore.kernel.org/r/20210517205057.1850010-1-trix@redhat.comSigned-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

With CONFIG_AIC7XXX_BUILD_FIRMWARE, there is this representative error:

  aicasm: Stopped at file ./drivers/scsi/aic7xxx/aic7xxx.seq,
    line 271 - Undefined symbol MSG_SIMPLE_Q_TAG referenced

MSG_SIMPLE_Q_TAG used to be defined in drivers/scsi/aic7xxx/scsi_message.h
as:

  #define MSG_SIMPLE_Q_TAG	0x20 /* O/O */

The new definition in include/scsi/scsi.h is:

  #define SIMPLE_QUEUE_TAG    0x20

But aicasm can not handle the all the preprocessor directives in scsi.h, so
add MSG_SIMPLE_Q_TAB and other required defines back to scsi_message.h.

Link: https://lore.kernel.org/r/20210517132451.1832233-1-trix@redhat.com
Fixes: d8cd784f ("scsi: aic7xxx: aic79xx: Drop internal SCSI message definition"
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This has us use raw_smp_processor_id() in iblock's plug_device callout.
smp_processor_id() is not needed here, because we are running from a per
CPU work item that is also queued to run on a worker thread that is
normally bound to a specific CPU. If the worker thread did end up switching
CPUs then it's handled the same way we handle when the work got moved to a
different CPU's worker thread, where we will just end up sending I/O from
the new CPU.

Link: https://lore.kernel.org/r/20210519222640.5153-1-michael.christie@oracle.com
Fixes: 415ccd98 ("scsi: target: iblock: Add backend plug/unplug callouts")
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If sas_notify_lldd_dev_found() fails then this code calls:

	sas_unregister_dev(port, dev);

which removes "dev", our list iterator, from the list.  This could lead to
an endless loop.  We need to use list_for_each_entry_safe().

Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda
Fixes: 303694ee ("[SCSI] libsas: suspend / resume support")
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit f5ce815f ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N *
PAGE_SIZE") introduced xas_next() calls to iterate xarray elements.  These
calls triggered the WARNING "suspicious RCU usage" at tcmu device set up
[1]. In the call stack of xas_next(), xas_load() was called.  According to
its comment, this function requires "the xa_lock or the RCU lock".

To avoid the warning:

 - Guard the small loop calling xas_next() in tcmu_get_empty_block with RCU
   lock.

 - In the large loop in tcmu_copy_data using RCU lock would possibly
   disable preemtion for a long time (copy multi MBs). Therefore replace
   XA_STATE, xas_set and xas_next with a single xa_load.

[1]

[ 1899.867091] =============================
[ 1899.871199] WARNING: suspicious RCU usage
[ 1899.875310] 5.13.0-rc1+ #41 Not tainted
[ 1899.879222] -----------------------------
[ 1899.883299] include/linux/xarray.h:1182 suspicious rcu_dereference_check() usage!
[ 1899.890940] other info that might help us debug this:
[ 1899.899082] rcu_scheduler_active = 2, debug_locks = 1
[ 1899.905719] 3 locks held by kworker/0:1/1368:
[ 1899.910161]  #0: ffffa1f8c8b98738 ((wq_completion)target_submission){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580
[ 1899.920732]  #1: ffffbd7040cd7e78 ((work_completion)(&q->sq.work)){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580
[ 1899.931146]  #2: ffffa1f8d1c99768 (&udev->cmdr_lock){+.+.}-{3:3}, at: tcmu_queue_cmd+0xea/0x160 [target_core_user]
[ 1899.941678] stack backtrace:
[ 1899.946093] CPU: 0 PID: 1368 Comm: kworker/0:1 Not tainted 5.13.0-rc1+ #41
[ 1899.953070] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 1899.962459] Workqueue: target_submission target_queued_submit_work [target_core_mod]
[ 1899.970337] Call Trace:
[ 1899.972839]  dump_stack+0x6d/0x89
[ 1899.976222]  xas_descend+0x10e/0x120
[ 1899.979875]  xas_load+0x39/0x50
[ 1899.983077]  tcmu_get_empty_blocks+0x115/0x1c0 [target_core_user]
[ 1899.989318]  queue_cmd_ring+0x1da/0x630 [target_core_user]
[ 1899.994897]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1899.999695]  ? trace_kmalloc+0xa6/0xd0
[ 1900.003501]  ? __kmalloc+0x205/0x380
[ 1900.007167]  tcmu_queue_cmd+0x12f/0x160 [target_core_user]
[ 1900.012746]  __target_execute_cmd+0x23/0xa0 [target_core_mod]
[ 1900.018589]  transport_generic_new_cmd+0x1f3/0x370 [target_core_mod]
[ 1900.025046]  transport_handle_cdb_direct+0x34/0x50 [target_core_mod]
[ 1900.031517]  target_queued_submit_work+0x43/0xe0 [target_core_mod]
[ 1900.037837]  process_one_work+0x268/0x580
[ 1900.041952]  ? process_one_work+0x580/0x580
[ 1900.046195]  worker_thread+0x55/0x3b0
[ 1900.049921]  ? process_one_work+0x580/0x580
[ 1900.054192]  kthread+0x143/0x160
[ 1900.057499]  ? kthread_create_worker_on_cpu+0x40/0x40
[ 1900.062661]  ret_from_fork+0x1f/0x30

Link: https://lore.kernel.org/r/20210519135440.26773-1-bostroesser@gmail.com
Fixes: f5ce815f ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZE")
Reported-by: NShin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: NShin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: NBodo Stroesser <bostroesser@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The BUG message "BUG: using smp_processor_id() in preemptible [00000000]
code" was observed for TCMU devices with kernel config DEBUG_PREEMPT.

The message was observed when blktests block/005 was run on TCMU devices
with fileio backend or user:zbc backend [1]. The commit 1130b499
("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the
symptom. The commit modified work queue to handle commands and changed
'current->nr_cpu_allowed' at smp_processor_id() call.

The message was also observed at system shutdown when TCMU devices were not
cleaned up [2]. The function smp_processor_id() was called in SCSI host
work queue for abort handling, and triggered the BUG message. This symptom
was observed regardless of the commit 1130b499 ("scsi: target:
tcm_loop: Use LIO wq cmd submission helper").

To avoid the preemptible code check at smp_processor_id(), get CPU ID with
raw_smp_processor_id() instead. The CPU ID is used for performance
improvement then thread move to other CPU will not affect the code.

[1]

[   56.468103] run blktests block/005 at 2021-05-12 14:16:38
[   57.369473] check_preemption_disabled: 85 callbacks suppressed
[   57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511
[   57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510
[   57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506
[   57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[   57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34
[   57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[   57.369617] Call Trace:
[   57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507
[   57.369628]  dump_stack+0x6d/0x89
[   57.369642]  check_preemption_disabled+0xc8/0xd0
[   57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[   57.369655]  __target_init_cmd+0x157/0x170 [target_core_mod]
[   57.369695]  target_init_cmd+0x76/0x90 [target_core_mod]
[   57.369732]  tcm_loop_queuecommand+0x109/0x210 [tcm_loop]
[   57.369744]  scsi_queue_rq+0x38e/0xc40
[   57.369761]  __blk_mq_try_issue_directly+0x109/0x1c0
[   57.369779]  blk_mq_try_issue_directly+0x43/0x90
[   57.369790]  blk_mq_submit_bio+0x4e5/0x5d0
[   57.369812]  submit_bio_noacct+0x46e/0x4e0
[   57.369830]  __blkdev_direct_IO_simple+0x1a3/0x2d0
[   57.369859]  ? set_init_blocksize.isra.0+0x60/0x60
[   57.369880]  generic_file_read_iter+0x89/0x160
[   57.369898]  blkdev_read_iter+0x44/0x60
[   57.369906]  new_sync_read+0x102/0x170
[   57.369929]  vfs_read+0xd4/0x160
[   57.369941]  __x64_sys_pread64+0x6e/0xa0
[   57.369946]  ? lockdep_hardirqs_on+0x79/0x100
[   57.369958]  do_syscall_64+0x3a/0x70
[   57.369965]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   57.369973] RIP: 0033:0x7f7ed4c1399f
[   57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b
[   57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
[   57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f
[   57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009
[   57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001
[   57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70
[   57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568
[   57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34
[   57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[   57.370039] Call Trace:
[   57.370045]  dump_stack+0x6d/0x89
[   57.370056]  check_preemption_disabled+0xc8/0xd0
[   57.370068]  __target_init_cmd+0x157/0x170 [target_core_mod]
[   57.370121]  target_init_cmd+0x76/0x90 [target_core_mod]
[   57.370178]  tcm_loop_queuecommand+0x109/0x210 [tcm_loop]
[   57.370197]  scsi_queue_rq+0x38e/0xc40
[   57.370224]  __blk_mq_try_issue_directly+0x109/0x1c0
...

[2]

[  117.458597] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u16:8
[  117.467279] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[  117.473893] CPU: 1 PID: 418 Comm: kworker/u16:6 Not tainted 5.13.0-rc1+ #34
[  117.481150] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 8
[  117.481153] Workqueue: scsi_tmf_7 scmd_eh_abort_handler
[  117.481156] Call Trace:
[  117.481158]  dump_stack+0x6d/0x89
[  117.481162]  check_preemption_disabled+0xc8/0xd0
[  117.512575]  target_submit_tmr+0x41/0x150 [target_core_mod]
[  117.519705]  tcm_loop_issue_tmr+0xa7/0x100 [tcm_loop]
[  117.524913]  tcm_loop_abort_task+0x43/0x60 [tcm_loop]
[  117.530137]  scmd_eh_abort_handler+0x7b/0x230
[  117.534681]  process_one_work+0x268/0x580
[  117.538862]  worker_thread+0x55/0x3b0
[  117.542652]  ? process_one_work+0x580/0x580
[  117.548351]  kthread+0x143/0x160
[  117.551675]  ? kthread_create_worker_on_cpu+0x40/0x40
[  117.556873]  ret_from_fork+0x1f/0x30

Link: https://lore.kernel.org/r/20210515070315.215801-1-shinichiro.kawasaki@wdc.com
Fixes: 1526d9f1 ("scsi: target: Make state_list per CPU")
Cc: stable@vger.kernel.org # v5.11+
Reviewed-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NShin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When driver is loaded after rmmod some drives are not showing up during
discovery.

SATA drives are directly attached to the controller connected phys.  During
device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out
during revalidation. This will trigger abort from host side and controller
successfully aborts the command and returns success. Post this successful
abort response ATA library decides to mark the disk as NODEV.

To overcome this, inside pm8001_scan_start() after phy_start() call, add get
start response and wait for few milliseconds to trigger next phy start.
This millisecond delay will give sufficient time for the controller state
machine to accept next phy start.

Link: https://lore.kernel.org/r/20210505120103.24497-1-ajish.koshy@microchip.comSigned-off-by: NAjish Koshy <ajish.koshy@microchip.com>
Signed-off-by: NViswas G <viswas.g@microchip.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.

Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com
Fixes: a9083016 ("[SCSI] qla2xxx: Add ISP82XX support.")
Reported-by: NHulk Robot <hulkci@huawei.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The following trace was observed:

 [   14.042059] Call Trace:
 [   14.042061]  <IRQ>
 [   14.042068]  qedf_link_update+0x144/0x1f0 [qedf]
 [   14.042117]  qed_link_update+0x5c/0x80 [qed]
 [   14.042135]  qed_mcp_handle_link_change+0x2d2/0x410 [qed]
 [   14.042155]  ? qed_set_ptt+0x70/0x80 [qed]
 [   14.042170]  ? qed_set_ptt+0x70/0x80 [qed]
 [   14.042186]  ? qed_rd+0x13/0x40 [qed]
 [   14.042205]  qed_mcp_handle_events+0x437/0x690 [qed]
 [   14.042221]  ? qed_set_ptt+0x70/0x80 [qed]
 [   14.042239]  qed_int_sp_dpc+0x3a6/0x3e0 [qed]
 [   14.042245]  tasklet_action_common.isra.14+0x5a/0x100
 [   14.042250]  __do_softirq+0xe4/0x2f8
 [   14.042253]  irq_exit+0xf7/0x100
 [   14.042255]  do_IRQ+0x7f/0xd0
 [   14.042257]  common_interrupt+0xf/0xf
 [   14.042259]  </IRQ>

API qedf_link_update() is getting called from QED but by that time
shost_data is not initialised. This results in a NULL pointer dereference
when we try to dereference shost_data while updating supported_speeds.

Add a NULL pointer check before dereferencing shost_data.

Link: https://lore.kernel.org/r/20210512072533.23618-1-jhasan@marvell.com
Fixes: 61d8658b ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NJaved Hasan <jhasan@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request and
hence reduces the usable queue depth.

The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue.

Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles
the queue depth on my test setup from 16 to 32.

In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().

Link: https://lore.kernel.org/r/20210513164912.5683-1-bvanassche@acm.org
Fixes: 7252a360 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Cc: Can Guo <cang@codeaurora.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit 391e2f25 ("[SCSI] BusLogic: Port driver to 64-bit")
introduced a serious issue for 64-bit systems.  With this commit,
64-bit kernel will enumerate 8*15 non-existing disks.  This is caused
by the broken CCB structure.  The change from u32 data to void *data
increased CCB length on 64-bit system, which introduced an extra 4
byte offset of the CDB.  This leads to incorrect response to INQUIRY
commands during enumeration.

Fix disk enumeration failure by reverting the portion of the commit
above which switched the data pointer from u32 to void.

Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.comAcked-by: NKhalid Aziz <khalid@gonehiking.org>
Signed-off-by: NMatt Wang <wwentao@vmware.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As per spec, e.g. JESD220E chapter 7.2, while powering off the UFS device,
RST_N signal should be between VSS(Ground) and VCCQ/VCCQ2. The power down
sequence after fixing:

Power down:

 1. Assert RST_N low

 2. Turn-off VCC

 3. Turn-off VCCQ/VCCQ2

Link: https://lore.kernel.org/r/1620813706-25331-1-git-send-email-peter.wang@mediatek.comReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NPeter Wang <peter.wang@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.

It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:

    drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
    static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
                        ^

Fix it.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Bit later than usual, I queued them all up on Friday then promptly
  forgot to write the pull request email. This is mainly amdgpu fixes,
  with some radeon/msm/fbdev and one i915 gvt fix thrown in.

  amdgpu:
   - MPO hang workaround
   - Fix for concurrent VM flushes on vega/navi
   - dcefclk is not adjustable on navi1x and newer
   - MST HPD debugfs fix
   - Suspend/resumes fixes
   - Register VGA clients late in case driver fails to load
   - Fix GEM leak in user framebuffer create
   - Add support for polaris12 with 32 bit memory interface
   - Fix duplicate cursor issue when using overlay
   - Fix corruption with tiled surfaces on VCN3
   - Add BO size and stride check to fix BO size verification

  radeon:
   - Fix off-by-one in power state parsing
   - Fix possible memory leak in power state parsing

  msm:
   - NULL ptr dereference fix

  fbdev:
   - procfs disabled warning fix

  i915:
   - gvt: Fix a possible division by zero in vgpu display rate
     calculation"

* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Use device specific BO size & stride check.
  drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
  drm/amd/pm: initialize variable
  drm/radeon: Avoid power table parsing memory leaks
  drm/radeon: Fix off-by-one power_state index heap overwrite
  drm/amd/display: Fix two cursor duplication when using overlay
  drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
  fbmem: Mark proc_fb_seq_ops as __maybe_unused
  drm/msm/dpu: Delete bonkers code
  drm/i915/gvt: Prevent divided by zero when calculating refresh rate
  amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
  drm/amdgpu: Register VGA clients after init can no longer fail
  drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
  drm/amdgpu: fix r initial values
  drm/amd/display: fix wrong statement in mst hpd debugfs
  amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
  amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
  drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
  drm/amd/display: Reject non-zero src_y and src_x for video planes

Pull block fix from Jens Axboe:
 "Turns out the bio max size change still has issues, so let's get it
  reverted for 5.13-rc1. We'll shake out the issues there and defer it
  to 5.14 instead"

* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
  Revert "bio: limit bio max size"

Pull cifs fixes from Steve French:
 "Three small SMB3 chmultichannel related changesets (also for stable)
  from the SMB3 test event this week.

  The other fixes are still in review/testing"

* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: if max_channels set to more than one channel request multichannel
  smb3: do not attempt multichannel to server which does not support it
  smb3: when mounting with multichannel include it in requested capabilities

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent PSI state corruption when schedule() races with cgroup
     move.

     A recent commit combined two PSI callbacks to reduce the number of
     cgroup tree updates, but missed that schedule() can drop rq::lock
     for load balancing, which opens the race window for
     cgroup_move_task() which then observes half updated state.

     The fix is to solely use task::ps_flags instead of looking at the
     potentially mismatching scheduler state

   - Prevent an out-of-bounds access in uclamp caused bu a rounding
     division which can lead to an off-by-one error exceeding the
     buckets array size.

   - Prevent unfairness caused by missing load decay when a task is
     attached to a cfs runqueue.

     The old load of the task was attached to the runqueue and never
     removed. Fix it by enforcing the load update through the hierarchy
     for unthrottled run queue instances.

   - A documentation fix fot the 'sched_verbose' command line option"

* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix unfairness caused by missing load decay
  sched: Fix out-of-bound access in uclamp
  psi: Fix psi state corruption when schedule() races with cgroup move
  sched,doc: sched_debug_verbose cmdline should be sched_verbose

Pull locking fixes from Thomas Gleixner:
 "A set of locking related fixes and updates:

   - Two fixes for the futex syscall related to the timeout handling.

     FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
     because it's not set the time namespace adjustment for clock
     MONOTONIC is applied wrongly.

     FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
     always a relative timeout.

   - Cleanups in the futex syscall entry points which became obvious
     when the two timeout handling bugs were fixed.

   - Cleanup of queued_write_lock_slowpath() as suggested by Linus

   - Fixup of the smp_call_function_single_async() prototype"

* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Make syscall entry points less convoluted
  futex: Get rid of the val2 conditional dance
  futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
  Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
  locking/qrwlock: Cleanup queued_write_lock_slowpath()
  smp: Fix smp_call_function_single_async prototype

Pull x86 perf fix from Borislav Petkov:
 "Handle power-gating of AMD IOMMU perf counters properly when they are
  used"

* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating

Pull x86 fixes from Borislav Petkov:
 "A bunch of things accumulated for x86 in the last two weeks:

   - Fix guest vtime accounting so that ticks happening while the guest
     is running can also be accounted to it. Along with a consolidation
     to the guest-specific context tracking helpers.

   - Provide for the host NMI handler running after a VMX VMEXIT to be
     able to run on the kernel stack correctly.

   - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
     relevant - real hw supports both)

   - A code generation improvement to TASK_SIZE_MAX through the use of
     alternatives

   - The usual misc and related cleanups and improvements"

* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: x86: Consolidate guest enter/exit logic to common helpers
  context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
  context_tracking: Consolidate guest enter/exit wrappers
  sched/vtime: Move guest enter/exit vtime accounting to vtime.h
  sched/vtime: Move vtime accounting external declarations above inlines
  KVM: x86: Defer vtime accounting 'til after IRQ handling
  context_tracking: Move guest exit vtime accounting to separate helpers
  context_tracking: Move guest exit context tracking to separate helpers
  KVM/VMX: Invoke NMI non-IST entry instead of IST entry
  x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
  x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
  x86/resctrl: Fix init const confusion
  x86: Delete UD0, UD1 traces
  x86/smpboot: Remove duplicate includes
  x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant

This reverts commit cd2c7545.

Alex reports that the commit causes corruption with LUKS on ext4. Revert
it for now so that this can be investigated properly.

Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/Reported-by: NAlex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid over-allocating the kernel's mapping on !MMU systems,
   which could lead to up to 2MiB of lost memory

 - The SiFive address extension errata only manifest on rv64, they are
   now disabled on rv32 where they are unnecessary

 - A pair of late-landing cleanups

* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: remove unused handle_exception symbol
  riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
  riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
  riscv: Only extend kernel reservation if mapped read-only

intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().

End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer.  gcc-11 correctly warns
about this case:

  drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
   3491 |                     !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
        |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
  In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
  include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
   1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
        |      ^~~~~~~~~~~~~~~~~~~~
       6:14 elapsed

This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.

There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes in various drivers (qla2xxx, ufs,
  scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
  driver to remove the open coded iteration functions in favour of the
  scsi provided ones"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Use scsi_host_busy_iter() to traverse commands
  scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
  scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
  scsi: ufs: core: Narrow down fast path in system suspend path
  scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
  scsi: ufs: core: Do not put UFS power into LPM if link is broken
  scsi: qla2xxx: Prevent PRLI in target mode
  scsi: qla2xxx: Add marginal path handling support
  scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
  scsi: ufs: core: Fix a typo in ufs-sysfs.c
  scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
  scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
  scsi: lpfc: Fix illegal memory access on Abort IOCBs
  scsi: blk-mq: Fix build warning when making htmldocs

Pull more Kbuild updates from Masahiro Yamada:

 - Convert sh and sparc to use generic shell scripts to generate the
   syscall headers

 - refactor .gitignore files

 - Update kernel/config_data.gz only when the content of the .config
   is really changed, which avoids the unneeded re-link of vmlinux

 - move "remove stale files" workarounds to scripts/remove-stale-files

 - suppress unused-but-set-variable warnings by default for Clang
   as well

 - fix locale setting LANG=C to LC_ALL=C

 - improve 'make distclean'

 - always keep intermediate objects from scripts/link-vmlinux.sh

 - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained

 - misc cleanups

* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
  kbuild: Don't remove link-vmlinux temporary files on exit/signal
  kbuild: remove the unneeded comments for external module builds
  kbuild: make distclean remove tag files in sub-directories
  kbuild: make distclean work against $(objtree) instead of $(srctree)
  kbuild: refactor modname-multi by using suffix-search
  kbuild: refactor fdtoverlay rule
  kbuild: parameterize the .o part of suffix-search
  arch: use cross_compiling to check whether it is a cross build or not
  kbuild: remove ARCH=sh64 support from top Makefile
  .gitignore: prefix local generated files with a slash
  kbuild: replace LANG=C with LC_ALL=C
  Makefile: Move -Wno-unused-but-set-variable out of GCC only block
  kbuild: add a script to remove stale generated files
  kbuild: update config_data.gz only when the content of .config is changed
  .gitignore: ignore only top-level modules.builtin
  .gitignore: move tags and TAGS close to other tag files
  kernel/.gitgnore: remove stale timeconst.h and hz.bc
  usr/include: refactor .gitignore
  genksyms: fix stale comment
  ...

Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-By: NTom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: NShyam Prasad N <sprasad@microsoft.com>

We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.

See MS-SMB2 section 3.2.5.2
Reviewed-by: NShyam Prasad N <sprasad@microsoft.com>
Reviewed-By: NTom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: NSteve French <stfrench@microsoft.com>

Pull powerpc updates and fixes from Michael Ellerman:
 "A bit of a mixture of things, tying up some loose ends.

  There's the removal of the nvlink code, which dependend on a commit in
  the vfio tree. Then the enablement of huge vmalloc which was in next
  for a few weeks but got dropped due to conflicts. And there's also a
  few fixes.

  Summary:

   - Remove the nvlink support now that it's only user has been removed.

   - Enable huge vmalloc mappings for Radix MMU (P9).

   - Fix KVM conversion to gfn-based MMU notifier callbacks.

   - Fix a kexec/kdump crash with hot plugged CPUs.

   - Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.

   - Restore alphabetic order of the selects under CONFIG_PPC.

  Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
  Sandipan Das, and Sourabh Jain"

* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
  powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
  powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
  powerpc/powernv/memtrace: Fix dcache flushing
  powerpc/kexec_file: Use current CPU info while setting up FDT
  powerpc/64s/radix: Enable huge vmalloc mappings
  powerpc/powernv: remove the nvlink support