- 26 11月, 2013 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 11 12月, 2011 4 次提交
-
-
由 Finn Thain 提交于
The IOP driver calls into the OSS driver to enable its IRQ. This undesirable coupling between drivers only exists because the OSS driver doesn't correctly handle all of its machspec IRQs. Fix OSS handling of enable/disable for VIA1 IRQs (8 thru 15) which includes MAC_IRQ_ADB. Back when I implemented pmac_zilog support I redefined IRQ_MAC_SCC incorrectly. Change this to a machspec IRQ so that it works on OSS. Clean up the unused OSS audio IRQ and OSS_IRQLEV_* cruft that only confuses things. Fix the OSS description in macints.c and remove an obsolete comment. Don't enable the VIA1 irq before registering the handler. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Finn Thain 提交于
Move some forward declarations into header files and adjust includes. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Finn Thain 提交于
mac_irq_pending() has only one caller (mac_esp.c). Nothing tests for Baboon, PSC or OSS pending interrupts. Until that need arises, let's keep it simple and remove all the unused abstraction. Replace it with a routine to check for SCSI DRQ. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Finn Thain 提交于
mac_clear_irq() is dead code and has been dead for as long as I can recall. On certain Mac models, certain irqs can't be cleared this way. Outside of irq dispatch, this code appears be unusable without busy loops or worse, and for irq dispatch we duplicate the same logic. Remove mac_clear_irq() and supporting code. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 09 11月, 2011 5 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
- Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 28 2月, 2010 1 次提交
-
-
由 Finn Thain 提交于
Remove the old 68k Mac serial port code and a lot of related cruft. Add new SCC platform devices to mac 68k platform. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 13 1月, 2009 1 次提交
-
-
由 Geert Uytterhoeven 提交于
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 29 12月, 2008 1 次提交
-
-
由 Finn Thain 提交于
Remove some more cruft from machw.h and drop the #include where it isn't needed. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 21 7月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - make the following needlessly global code (always) static: - baboon.c: struct baboon - baboon.c: baboon_irq() - config.c: mac_orig_videoaddr - config.c: mac_identify() - config.c: mac_report_hardware() - config.c: mac_debug_console_write() - config.c: mac_sccb_console_write() - config.c: mac_scca_console_write() - config.c: mac_init_scc_port() - oss.c: oss_irq() - oss.c: oss_nubus_irq() - psc.c: psc_debug_dump() - psc.c: psc_dma_die_die_die() - via.c: rbv_clear - remove the unused bootparse.c - #if 0 the following unused functions: - config.c: mac_debugging_short() - config.c: mac_debugging_long() - remove the following unused code: - config.c: mac_bisize - config.c: mac_env - config.c: mac_SCC_init_done - config.c: mac_SCC_reset_done - config.c: mac_init_scca_port() - config.c: mac_init_sccb_port() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 10月, 2007 1 次提交
-
-
由 Simon Arlott 提交于
Spelling fixes in arch/m68k/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 05 5月, 2007 3 次提交
-
-
由 Finn Thain 提交于
There are no slow IRQs on Macs since Roman Zippel's IRQ reorganisation that went into 2.6.16 and removed mac_irq_list[] and the do_mac_irq_list() dispatcher. (They were implemented in do_mac_irq_list() by lowering the IPL.) Hence there's no more use for mutual exclusion in the Mac interrupt dispatchers. Remove it. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Finn Thain 提交于
Make sure that there are no slot IRQs asserted before leaving the nubus handler. If there are and we don't then the nubus gets wedged because this prevents a CA1 transition, which means no more nubus IRQs. Make the interrupt dispatch loops terminate sooner. Explicitly initialise the VIA latches to make the code more easily understood. Also some cleanups. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Finn Thain 提交于
Reverse the last of a monumental brown-paper-bag commit that went into the 2.3 kernel. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 10月, 2006 1 次提交
-
-
由 Al Viro 提交于
m68k_handle_int() split in two functions: __m68k_handle_int() takes pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs *. Places where we used to call m68k_handle_int() recursively with the same pt_regs have simply lost the second argument, the rest is switched to __m68k_handle_int(). The rest of patch is just dropping pt_regs * where needed. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2006 1 次提交
-
-
由 Roman Zippel 提交于
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-