io_wqe_cancel_pending_work() grabs it internally, grab it upfront
instead. For the running work cancelation, grab the lock around it as
well.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In preparation to nesting it under the wqe lock (which is raw due to
being acquired from the scheduler side), change the io_worker lock from
a normal spinlock to a raw spinlock.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We don't use 'work' anymore in the busy logic, remove the dead argument.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fixes a problem described in 50252e4b
("aio: fix use-after-free due to missing POLLFREE handling")
and copies the approach used there.

In short, we have to forcibly eject a poll entry when we meet POLLFREE.
We can't rely on io_poll_get_ownership() as can't wait for potentially
running tw handlers, so we use the fact that wqs are RCU freed. See
Eric's patch and comments for more details.
Reported-by: NEric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org
Reported-and-tested-by: syzbot+5426c7ed6868c705ca14@syzkaller.appspotmail.com
Fixes: 221c5eb2 ("io_uring: add support for IORING_OP_POLL")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ed56b6f548f7ea337603a82315750449412748a.1642161259.git.asml.silence@gmail.com
[axboe: drop non-functional change from patch]
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix the following clang warnings:

fs/io_uring.c:1195:20: warning: unused function 'req_ref_put'
[-Wunused-function].

Fixes: aa43477b ("io_uring: poll rework")
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220113162005.3011-1-jiapeng.chong@linux.alibaba.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

Pull mailbox updates from Jassi Brar:

 - qcom: misc updates to qcom-ipcc driver

 - mpfs: change compatible string

 - pcc:
     - fix handling of subtypes
     - avoid uninitialized variable

 - mtk:
     - add missing of_node_put
     - enable control_by_sw
     - silent probe-defer prints
     - fix gce_num for mt8192

 - zynq: add missing of_node_put

 - imx: check for NULL instead of IS_ERR

 - appple: switch to generic compatibles

 - hi3660: convert comments to kernel-doc notation

* tag 'mailbox-v5.17' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: Add more protocol and client ID
  mailbox: qcom-ipcc: Support interrupt wake up from suspend
  mailbox: qcom-ipcc: Support more IPCC instance
  mailbox: qcom-ipcc: Dynamic alloc for channel arrangement
  mailbox: change mailbox-mpfs compatible string
  mailbox: pcc: Handle all PCC subtypes correctly in pcc_mbox_irq
  mailbox: pcc: Avoid using the uninitialized variable 'dev'
  mailbox: mtk: add missing of_node_put before return
  mailbox: zynq: add missing of_node_put before return
  mailbox: imx: Fix an IS_ERR() vs NULL bug
  mailbox: hi3660: convert struct comments to kernel-doc notation
  mailbox: add control_by_sw for mt8195
  mailbox: mtk-cmdq: Silent EPROBE_DEFER errors for clks
  mailbox: fix gce_num of mt8192 driver data
  mailbox: apple: Bind to generic compatibles
  dt-bindings: mailbox: apple,mailbox: Add generic and t6000 compatibles

Pull rdma updates from Jason Gunthorpe:
 "Another small cycle. Mostly cleanups and bug fixes, quite a bit
  assisted from bots. There are a few new syzkaller splats that haven't
  been solved yet but they should get into the rcs in a few weeks, I
  think.

  Summary:

   - Update drivers to use common helpers for GUIDs, pkeys, bitmaps,
     memset_startat, and others

   - General code cleanups from bots

   - Simplify some of the rxe pool code in preparation for a larger
     rework

   - Clean out old stuff from hns, including all support for hip06
     devices

   - Fix a bug where GID table entries could be missed if the table had
     holes in it

   - Rename paths and sessions in rtrs for better understandability

   - Consolidate the roce source port selection code

   - NDR speed support in mlx5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (83 commits)
  RDMA/irdma: Remove the redundant return
  RDMA/rxe: Use the standard method to produce udp source port
  RDMA/irdma: Make the source udp port vary
  RDMA/hns: Replace get_udp_sport with rdma_get_udp_sport
  RDMA/core: Calculate UDP source port based on flow label or lqpn/rqpn
  IB/qib: Fix typos
  RDMA/rtrs-clt: Rename rtrs_clt to rtrs_clt_sess
  RDMA/rtrs-srv: Rename rtrs_srv to rtrs_srv_sess
  RDMA/rtrs-clt: Rename rtrs_clt_sess to rtrs_clt_path
  RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path
  RDMA/rtrs: Rename rtrs_sess to rtrs_path
  RDMA/hns: Modify the hop num of HIP09 EQ to 1
  IB/iser: Align coding style across driver
  IB/iser: Remove un-needed casting to/from void pointer
  IB/iser: Don't suppress send completions
  IB/iser: Rename ib_ret local variable
  IB/iser: Fix RNR errors
  IB/iser: Remove deprecated pi_guard module param
  IB/mlx5: Expose NDR speed through MAD
  RDMA/cxgb4: Set queue pair state when being queried
  ...

To resolve minor conflict in:
        drivers/infiniband/hw/mlx5/mlx5_ib.h

By merging both hunks.
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Pull MSI irq updates from Thomas Gleixner:
 "Rework of the MSI interrupt infrastructure.

  This is a treewide cleanup and consolidation of MSI interrupt handling
  in preparation for further changes in this area which are necessary
  to:

   - address existing shortcomings in the VFIO area

   - support the upcoming Interrupt Message Store functionality which
     decouples the message store from the PCI config/MMIO space"

* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
  genirq/msi: Populate sysfs entry only once
  PCI/MSI: Unbreak pci_irq_get_affinity()
  genirq/msi: Convert storage to xarray
  genirq/msi: Simplify sysfs handling
  genirq/msi: Add abuse prevention comment to msi header
  genirq/msi: Mop up old interfaces
  genirq/msi: Convert to new functions
  genirq/msi: Make interrupt allocation less convoluted
  platform-msi: Simplify platform device MSI code
  platform-msi: Let core code handle MSI descriptors
  bus: fsl-mc-msi: Simplify MSI descriptor handling
  soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
  soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
  NTB/msi: Convert to msi_on_each_desc()
  PCI: hv: Rework MSI handling
  powerpc/mpic_u3msi: Use msi_for_each-desc()
  powerpc/fsl_msi: Use msi_for_each_desc()
  powerpc/pasemi/msi: Convert to msi_on_each_dec()
  powerpc/cell/axon_msi: Convert to msi_on_each_desc()
  powerpc/4xx/hsta: Rework MSI handling
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for the time(r) subsystem:

  Core:

   - Make the clocksource watchdog more robust by better validation
     checks of the measurement.

  Drivers:

   - New drivers for MStar and SSD20xd SOCs

   - The usual cleanups and improvements all over the place"

* tag 'timers-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: timer: Add Mstar MSC313e timer devicetree bindings documentation
  clocksource/drivers/msc313e: Add support for ssd20xd-based platforms
  clocksource/drivers: Add MStar MSC313e timer support
  clocksource/drivers/pistachio: Fix -Wunused-but-set-variable warning
  clocksource/drivers/timer-imx-sysctr: Set cpumask to cpu_possible_mask
  clocksource/drivers/imx-sysctr: Mark two variable with __ro_after_init
  clocksource/drivers/renesas,ostm: Make RENESAS_OSTM symbol visible
  clocksource/drivers/renesas-ostm: Add RZ/G2L OSTM support
  dt-bindings: timer: renesas: ostm: Document Renesas RZ/G2L OSTM
  clocksource/drivers/exynos_mct: Fix silly typo resulting in checkpatch warning
  clocksource: Reduce the default clocksource_watchdog() retries to 2
  clocksource: Avoid accidental unstable marking of clocksources
  dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  reset: Add of_reset_control_get_optional_exclusive()
  clocksource/drivers/exynos_mct: Refactor resources allocation
  dt-bindings: timer: remove rockchip,rk3066-timer compatible string from rockchip,rk-timer.yaml
  dt-bindings: timer: cadence_ttc: Add power-domains

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core:

   - Provide a new interface for affinity hints to provide a separation
     between hint and actual affinity change which has become a hidden
     property of the current interface

   - Fix up the in tree usage of the affinity hint interfaces

  Drivers:

   - No new irqchip drivers!

   - Fix GICv3 redistributor table reservation with RT across kexec

   - Fix GICv4.1 redistributor view of the VPE table across kexec

   - Add support for extra interrupts on spear-shirq

   - Make obtaining some interrupts optional for the Renesas drivers

   - Various cleanups and bug fixes"

* tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt
  irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt
  irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
  irqchip/ingenic-tcu: Use correctly sized arguments for bit field
  irqchip/gic-v2m: Add const to of_device_id
  irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init
  irqchip/spear-shirq: Add support for IRQ 0..6
  irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime
  irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve
  irqchip/gic-v3-its: Give the percpu rdist struct its own flags field
  net/mlx4: Use irq_update_affinity_hint()
  net/mlx5: Use irq_set_affinity_and_hint()
  hinic: Use irq_set_affinity_and_hint()
  scsi: lpfc: Use irq_set_affinity()
  mailbox: Use irq_update_affinity_hint()
  ixgbe: Use irq_update_affinity_hint()
  be2net: Use irq_update_affinity_hint()
  enic: Use irq_update_affinity_hint()
  RDMA/irdma: Use irq_update_affinity_hint()
  scsi: mpt3sas: Use irq_set_affinity_and_hint()
  ...

Pull clk updates from Stephen Boyd:
 "We have a couple patches in the framework core this time around but
  they're mostly minor cleanups and some debugfs stuff. The real work
  that's in here is the typical pile of clk driver updates and new SoC
  support.

  Per usual (or maybe just recent trends), Qualcomm gains a handful of
  SoC drivers additions and has the largest diffstat. After that there
  are quite a few updates to the Allwinner (sunxi) drivers to support
  modular drivers and Renesas is heavily updated to add more support for
  various clks.

  Overall it looks pretty normal.

  New Drivers:
   - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
   - MediaTek mt7986 SoC basic support
   - Clock and reset driver for Toshiba Visconti SoCs
   - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
   - Allwinner D1 clks
   - Lan966x Generic Clock Controller driver and associated DT bindings
   - Qualcomm SDX65, SM8450, and MSM8976 GCC clks
   - Qualcomm SDX65 and SM8450 RPMh clks

  Updates:
   - Set suppress_bind_attrs to true for i.MX8ULP driver
   - Switch from do_div to div64_ul for throughout all i.MX drivers
   - Fix imx8mn_clko1_sels for i.MX8MN
   - Remove unused IPG_AUDIO_ROOT from i.MX8MP
   - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
   - Removal of all remaining uses of __clk_lookup() in
     drivers/clk/samsung
   - Refactoring of the CPU clocks registration to use common interface
   - An update of the Exynos850 driver (support for more clock domains)
     required by the E850-96 development board
   - Prep for runtime PM and generic power domains on Tegra
   - Support modular Allwinner clk drivers via platform bus
   - Lan966x clock driver extended to support clock gating
   - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
     thermal (TSU) clocks and resets on Renesas RZ/G2L
   - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
     clock drivers, and in the Renesas SDHI driver
   - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
   - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
   - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
   - Add GPU clock and resets on Renesas RZ/G2L
   - Add clk-provider.h to various Qualcomm clk drivers
   - devm version of clk_hw_register_gate()
   - kerneldoc fixes in a couple drivers"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
  clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
  clk: mediatek: add mt7986 clock support
  clk: mediatek: add mt7986 clock IDs
  dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
  clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
  clk: x86: Fix clk_gate_flags for RV_CLK_GATE
  clk: x86: Use dynamic con_id string during clk registration
  ACPI: APD: Add a fmw property clk-name
  drivers: acpi: acpi_apd: Remove unused device property "is-rv"
  x86: clk: clk-fch: Add support for newer family of AMD's SOC
  clk: ingenic: Add MDMA and BDMA clocks
  dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
  clk: bm1880: remove kfrees on static allocations
  clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
  clk: st: clkgen-mux: search reg within node or parent
  clk: st: clkgen-fsyn: search reg within node or parent
  clk: Enable/Disable runtime PM for clk_summary
  MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
  clk: visconti: Add support common clock driver and reset driver
  ...

Pull LED updates from Pavel Machek:
 "Nothing major is happening here"

* tag 'leds-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: lp55xx: initialise output direction from dts
  ARM: dts: omap3-n900: Fix lp5523 for multi color
  leds: ktd2692: Drop calling dev_of_node() in ktd2692_parse_dt
  leds: lgm-sso: Get rid of duplicate of_node assignment
  leds: tca6507: Get rid of duplicate of_node assignment
  leds: leds-fsg: Drop FSG3 LED driver
  leds: lp50xx: remove unused variable
  dt-bindings: leds: Replace moonlight with indicator in mt6360 example
  leds: led-core: Update fwnode with device_set_node
  leds: tca6507: use swap() to make code cleaner
  leds: Add mt6360 driver
  dt-bindings: leds: Add bindings for MT6360 LED

Pull devicetree updates from Rob Herring:
 "Bindings:

   - DT schema conversions for Samsung clocks, RNG bindings, Qcom
     Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
     Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb

   - DT schema conversions for Broadcom platforms: interrupt
     controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
     iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
     SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
     arbiter, and SATA

   - Add binding schemas for Tegra210 EMC table, TI DC-DC converters,

   - Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues

   - More fixes due to 'unevaluatedProperties' enabling

   - Data type fixes and clean-ups of binding examples found in
     preparation to move to validating DTB files directly (instead of
     intermediate YAML representation.

   - Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus

   - Add various new compatible strings

  DT core:

   - Silence a warning for overlapping reserved memory regions

   - Reimplement unittest overlay tracking

   - Fix stack frame size warning in unittest

   - Clean-ups of early FDT scanning functions

   - Fix handling of "linux,usable-memory-range" on EFI booted systems

   - Add support for 'fail' status on CPU nodes

   - Improve error message in of_phandle_iterator_next()

   - kbuild: Disable duplicate unit-address warnings for disabled nodes"

* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
  dt-bindings: net: mdio: Drop resets/reset-names child properties
  dt-bindings: clock: samsung: convert S5Pv210 to dtschema
  dt-bindings: clock: samsung: convert Exynos5410 to dtschema
  dt-bindings: clock: samsung: convert Exynos5260 to dtschema
  dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
  dt-bindings: clock: samsung: convert Exynos7 to dtschema
  dt-bindings: clock: samsung: convert Exynos5433 to dtschema
  dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
  dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
  dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
  dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
  dt-bindings: clock: imx5: Drop clock consumer node from example
  dt-bindings: Drop required 'interrupt-parent'
  dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
  dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
  dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
  dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
  dt-bindings: net: stm32-dwmac: Make each example a separate entry
  dt-bindings: net: Cleanup MDIO node schemas
  ...

Pull xen updates from Juergen Gross:

 - a fix for the Xen gntdev driver

 - a fix for running as Xen dom0 booted via EFI and the EFI framebuffer
   being located above 4GB

 - a series for support of mapping other guest's memory by using zone
   device when running as Xen guest on Arm

* tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  dt-bindings: xen: Clarify "reg" purpose
  arm/xen: Read extended regions from DT and init Xen resource
  xen/unpopulated-alloc: Add mechanism to use Xen resource
  xen/balloon: Bring alloc(free)_xenballooned_pages helpers back
  arm/xen: Switch to use gnttab_setup_auto_xlat_frames() for DT
  xen/unpopulated-alloc: Drop check for virt_addr_valid() in fill_list()
  xen/x86: obtain upper 32 bits of video frame buffer address for Dom0
  xen/gntdev: fix unmap notification order

Pull x86 core updates from Borislav Petkov:

 - Get rid of all the .fixup sections because this generates
   misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
   LIVEPATCH as the backtrace misses the function which is being fixed
   up.

 - Add Straight Line Speculation mitigation support which uses a new
   compiler switch -mharden-sls= which sticks an INT3 after a RET or an
   indirect branch in order to block speculation after them. Reportedly,
   CPUs do speculate behind such insns.

 - The usual set of cleanups and improvements

* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  x86/entry_32: Fix segment exceptions
  objtool: Remove .fixup handling
  x86: Remove .fixup section
  x86/word-at-a-time: Remove .fixup usage
  x86/usercopy: Remove .fixup usage
  x86/usercopy_32: Simplify __copy_user_intel_nocache()
  x86/sgx: Remove .fixup usage
  x86/checksum_32: Remove .fixup usage
  x86/vmx: Remove .fixup usage
  x86/kvm: Remove .fixup usage
  x86/segment: Remove .fixup usage
  x86/fpu: Remove .fixup usage
  x86/xen: Remove .fixup usage
  x86/uaccess: Remove .fixup usage
  x86/futex: Remove .fixup usage
  x86/msr: Remove .fixup usage
  x86/extable: Extend extable functionality
  x86/entry_32: Remove .fixup usage
  x86/entry_64: Remove .fixup usage
  x86/copy_mc_64: Remove .fixup usage
  ...

Pull perf updates from Borislav Petkov:
 "Cleanup of the perf/kvm interaction."

* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Drop guest callback (un)register stubs
  KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
  KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
  KVM: arm64: Convert to the generic perf callbacks
  KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
  KVM: Move x86's perf guest info callbacks to generic KVM
  KVM: x86: More precisely identify NMI from guest when handling PMI
  KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
  perf/core: Use static_call to optimize perf_guest_info_callbacks
  perf: Force architectures to opt-in to guest callbacks
  perf: Add wrappers for invoking guest callbacks
  perf/core: Rework guest callbacks to prepare for static_call support
  perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
  perf: Stop pretending that perf can handle multiple guest callbacks
  KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
  KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
  perf: Protect perf_guest_cbs with RCU

Pull iommu updates from Joerg Roedel:

 - Identity domain support for virtio-iommu

 - Move flush queue code into iommu-dma

 - Some fixes for AMD IOMMU suspend/resume support when x2apic is used

 - Arm SMMU Updates from Will Deacon:
      - Revert evtq and priq back to their former sizes
      - Return early on short-descriptor page-table allocation failure
      - Fix page fault reporting for Adreno GPU on SMMUv2
      - Make SMMUv3 MMU notifier ops 'const'
      - Numerous new compatible strings for Qualcomm SMMUv2 implementations

 - Various smaller fixes and cleanups

* tag 'iommu-updates-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (38 commits)
  iommu/iova: Temporarily include dma-mapping.h from iova.h
  iommu: Move flush queue data into iommu_dma_cookie
  iommu/iova: Move flush queue code to iommu-dma
  iommu/iova: Consolidate flush queue code
  iommu/vt-d: Use put_pages_list
  iommu/amd: Use put_pages_list
  iommu/amd: Simplify pagetable freeing
  iommu/iova: Squash flush_cb abstraction
  iommu/iova: Squash entry_dtor abstraction
  iommu/iova: Fix race between FQ timeout and teardown
  iommu/amd: Fix typo in *glues … together* in comment
  iommu/vt-d: Remove unused dma_to_mm_pfn function
  iommu/vt-d: Drop duplicate check in dma_pte_free_pagetable()
  iommu/vt-d: Use bitmap_zalloc() when applicable
  iommu/amd: Remove useless irq affinity notifier
  iommu/amd: X2apic mode: mask/unmask interrupts on suspend/resume
  iommu/amd: X2apic mode: setup the INTX registers on mask/unmask
  iommu/amd: X2apic mode: re-enable after resume
  iommu/amd: Restore GA log/tail pointer on host resume
  iommu/iova: Move fast alloc size roundup into alloc_iova_fast()
  ...

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The highlight is initial support for CXL memory hotplug. The static
  NUMA node (ACPI SRAT Physical Address to Proximity Domain) information
  known to platform firmware is extended to support the potential
  performance-class / memory-target nodes dynamically created from
  available CXL memory device capacity.

  New unit test infrastructure is added for validating health
  information payloads.

  Fixes to module reload stress and stack usage from exposure in -next
  are included. A symbol rename and some other miscellaneous fixups are
  included as well.

  Summary:

   - Rework ACPI sub-table infrastructure to optionally be used outside
     of __init scenarios and use it for CEDT.CFMWS sub-table parsing.

   - Add support for extending num_possible_nodes by the potential
     hotplug CXL memory ranges

   - Extend tools/testing/cxl with mock memory device health information

   - Fix a module-reload workqueue race

   - Fix excessive stack-frame usage

   - Rename the driver context data structure from "cxl_mem" since that
     name collides with a proposed driver name

   - Use EXPORT_SYMBOL_NS_GPL instead of -DDEFAULT_SYMBOL_NAMESPACE at
     build time"

* tag 'cxl-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/core: Remove cxld_const_init in cxl_decoder_alloc()
  cxl/pmem: Fix module reload vs workqueue state
  ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT
  cxl/test: Mock acpi_table_parse_cedt()
  cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers
  ACPI: Add a context argument for table parsing handlers
  ACPI: Teach ACPI table parsing about the CEDT header format
  ACPI: Keep sub-table parsing infrastructure available for modules
  tools/testing/cxl: add mock output for the GET_HEALTH_INFO command
  cxl/memdev: Remove unused cxlmd field
  cxl/core: Convert to EXPORT_SYMBOL_NS_GPL
  cxl/memdev: Change cxl_mem to a more descriptive name
  cxl/mbox: Remove bad comment
  cxl/pmem: Fix reference counting for delayed work

Pull dax and libnvdimm updates from Dan Williams:
 "The bulk of this is a rework of the dax_operations API after
  discovering the obstacles it posed to the work-in-progress DAX+reflink
  support for XFS and other copy-on-write filesystem mechanics.

  Primarily the need to plumb a block_device through the API to handle
  partition offsets was a sticking point and Christoph untangled that
  dependency in addition to other cleanups to make landing the
  DAX+reflink support easier.

  The DAX_PMEM_COMPAT option has been around for 4 years and not only
  are distributions shipping userspace that understand the current
  configuration API, but some are not even bothering to turn this option
  on anymore, so it seems a good time to remove it per the deprecation
  schedule. Recall that this was added after the device-dax subsystem
  moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
  All recent functionality depends on /sys/bus/dax.

  Some other miscellaneous cleanups and reflink prep patches are
  included as well.

  Summary:

   - Simplify the dax_operations API:

      - Eliminate bdev_dax_pgoff() in favor of the filesystem
        maintaining and applying a partition offset to all its DAX iomap
        operations.

      - Remove wrappers and device-mapper stacked callbacks for
        ->copy_from_iter() and ->copy_to_iter() in favor of moving
        block_device relative offset responsibility to the
        dax_direct_access() caller.

      - Remove the need for an @bdev in filesystem-DAX infrastructure

      - Remove unused uio helpers copy_from_iter_flushcache() and
        copy_mc_to_iter() as only the non-check_copy_size() versions are
        used for DAX.

   - Prepare XFS for the pending (next merge window) DAX+reflink support

   - Remove deprecated DEV_DAX_PMEM_COMPAT support

   - Cleanup a straggling misuse of the GUID api"

* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
  iomap: Fix error handling in iomap_zero_iter()
  ACPI: NFIT: Import GUID before use
  dax: remove the copy_from_iter and copy_to_iter methods
  dax: remove the DAXDEV_F_SYNC flag
  dax: simplify dax_synchronous and set_dax_synchronous
  uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
  iomap: turn the byte variable in iomap_zero_iter into a ssize_t
  memremap: remove support for external pgmap refcounts
  fsdax: don't require CONFIG_BLOCK
  iomap: build the block based code conditionally
  dax: fix up some of the block device related ifdefs
  fsdax: shift partition offset handling into the file systems
  dax: return the partition offset from fs_dax_get_by_bdev
  iomap: add a IOMAP_DAX flag
  xfs: pass the mapping flags to xfs_bmbt_to_iomap
  xfs: use xfs_direct_write_iomap_ops for DAX zeroing
  xfs: move dax device handling into xfs_{alloc,free}_buftarg
  ext4: cleanup the dax handling in ext4_fill_super
  ext2: cleanup the dax handling in ext2_fill_super
  fsdax: decouple zeroing from the iomap buffered I/O code
  ...

Merge tag 'fscache-rewrite-20220111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull fscache rewrite from David Howells:
 "This is a set of patches that rewrites the fscache driver and the
  cachefiles driver, significantly simplifying the code compared to
  what's upstream, removing the complex operation scheduling and object
  state machine in favour of something much smaller and simpler.

  The series is structured such that the first few patches disable
  fscache use by the network filesystems using it, remove the cachefiles
  driver entirely and as much of the fscache driver as can be got away
  with without causing build failures in the network filesystems.

  The patches after that recreate fscache and then cachefiles,
  attempting to add the pieces in a logical order. Finally, the
  filesystems are reenabled and then the very last patch changes the
  documentation.

  [!] Note: I have dropped the cifs patch for the moment, leaving local
      caching in cifs disabled. I've been having trouble getting that
      working. I think I have it done, but it needs more testing (there
      seem to be some test failures occurring with v5.16 also from
      xfstests), so I propose deferring that patch to the end of the
      merge window.

  WHY REWRITE?
  ============

  Fscache's operation scheduling API was intended to handle sequencing
  of cache operations, which were all required (where possible) to run
  asynchronously in parallel with the operations being done by the
  network filesystem, whilst allowing the cache to be brought online and
  offline and to interrupt service for invalidation.

  With the advent of the tmpfile capacity in the VFS, however, an
  opportunity arises to do invalidation much more simply, without having
  to wait for I/O that's actually in progress: Cachefiles can simply
  create a tmpfile, cut over the file pointer for the backing object
  attached to a cookie and abandon the in-progress I/O, dismissing it
  upon completion.

  Future work here would involve using Omar Sandoval's vfs_link() with
  AT_LINK_REPLACE[1] to allow an extant file to be displaced by a new
  hard link from a tmpfile as currently I have to unlink the old file
  first.

  These patches can also simplify the object state handling as I/O
  operations to the cache don't all have to be brought to a stop in
  order to invalidate a file. To that end, and with an eye on to writing
  a new backing cache model in the future, I've taken the opportunity to
  simplify the indexing structure.

  I've separated the index cookie concept from the file cookie concept
  by C type now. The former is now called a "volume cookie" (struct
  fscache_volume) and there is a container of file cookies. There are
  then just the two levels. All the index cookie levels are collapsed
  into a single volume cookie, and this has a single printable string as
  a key. For instance, an AFS volume would have a key of something like
  "afs,example.com,1000555", combining the filesystem name, cell name
  and volume ID. This is freeform, but must not have '/' chars in it.

  I've also eliminated all pointers back from fscache into the network
  filesystem. This required the duplication of a little bit of data in
  the cookie (cookie key, coherency data and file size), but it's not
  actually that much. This gets rid of problems with making sure we keep
  netfs data structures around so that the cache can access them.

  These patches mean that most of the code that was in the drivers
  before is simply gone and those drivers are now almost entirely new
  code. That being the case, there doesn't seem any particular reason to
  try and maintain bisectability across it. Further, there has to be a
  point in the middle where things are cut over as there's a single
  point everything has to go through (ie. /dev/cachefiles) and it can't
  be in use by two drivers at once.

  ISSUES YET OUTSTANDING
  ======================

  There are some issues still outstanding, unaddressed by this patchset,
  that will need fixing in future patchsets, but that don't stop this
  series from being usable:

  (1) The cachefiles driver needs to stop using the backing filesystem's
      metadata to store information about what parts of the cache are
      populated. This is not reliable with modern extent-based
      filesystems.

      Fixing this is deferred to a separate patchset as it involves
      negotiation with the network filesystem and the VM as to how much
      data to download to fulfil a read - which brings me on to (2)...

  (2) NFS (and CIFS with the dropped patch) do not take account of how
      the cache would like I/O to be structured to meet its granularity
      requirements. Previously, the cache used page granularity, which
      was fine as the network filesystems also dealt in page
      granularity, and the backing filesystem (ext4, xfs or whatever)
      did whatever it did out of sight. However, we now have folios to
      deal with and the cache will now have to store its own metadata to
      track its contents.

      The change I'm looking at making for cachefiles is to store
      content bitmaps in one or more xattrs and making a bit in the map
      correspond to something like a 256KiB block. However, the size of
      an xattr and the fact that they have to be read/updated in one go
      means that I'm looking at covering 1GiB of data per 512-byte map
      and storing each map in an xattr. Cachefiles has the potential to
      grow into a fully fledged filesystem of its very own if I'm not
      careful.

      However, I'm also looking at changing things even more radically
      and going to a different model of how the cache is arranged and
      managed - one that's more akin to the way, say, openafs does
      things - which brings me on to (3)...

  (3) The way cachefilesd does culling is very inefficient for large
      caches and it would be better to move it into the kernel if I can
      as cachefilesd has to keep asking the kernel if it can cull a
      file. Changing the way the backend works would allow this to be
      addressed.

  BITS THAT MAY BE CONTROVERSIAL
  ==============================

  There are some bits I've added that may be controversial:

  (1) I've provided a flag, S_KERNEL_FILE, that cachefiles uses to check
      if a files is already being used by some other kernel service
      (e.g. a duplicate cachefiles cache in the same directory) and
      reject it if it is. This isn't entirely necessary, but it helps
      prevent accidental data corruption.

      I don't want to use S_SWAPFILE as that has other effects, but
      quite possibly swapon() should set S_KERNEL_FILE too.

      Note that it doesn't prevent userspace from interfering, though
      perhaps it should. (I have made it prevent a marked directory from
      being rmdir-able).

  (2) Cachefiles wants to keep the backing file for a cookie open whilst
      we might need to write to it from network filesystem writeback.
      The problem is that the network filesystem unuses its cookie when
      its file is closed, and so we have nothing pinning the cachefiles
      file open and it will get closed automatically after a short time
      to avoid EMFILE/ENFILE problems.

      Reopening the cache file, however, is a problem if this is being
      done due to writeback triggered by exit(). Some filesystems will
      oops if we try to open a file in that context because they want to
      access current->fs or suchlike.

      To get around this, I added the following:

      (A) An inode flag, I_PINNING_FSCACHE_WB, to be set on a network
          filesystem inode to indicate that we have a usage count on the
          cookie caching that inode.

      (B) A flag in struct writeback_control, unpinned_fscache_wb, that
          is set when __writeback_single_inode() clears the last dirty
          page from i_pages - at which point it clears
          I_PINNING_FSCACHE_WB and sets this flag.

          This has to be done here so that clearing I_PINNING_FSCACHE_WB
          can be done atomically with the check of PAGECACHE_TAG_DIRTY
          that clears I_DIRTY_PAGES.

      (C) A function, fscache_set_page_dirty(), which if it is not set,
          sets I_PINNING_FSCACHE_WB and calls fscache_use_cookie() to
          pin the cache resources.

      (D) A function, fscache_unpin_writeback(), to be called by
          ->write_inode() to unuse the cookie.

      (E) A function, fscache_clear_inode_writeback(), to be called when
          the inode is evicted, before clear_inode() is called. This
          cleans up any lingering I_PINNING_FSCACHE_WB.

      The network filesystem can then use these tools to make sure that
      fscache_write_to_cache() can write locally modified data to the
      cache as well as to the server.

      For the future, I'm working on write helpers for netfs lib that
      should allow this facility to be removed by keeping track of the
      dirty regions separately - but that's incomplete at the moment and
      is also going to be affected by folios, one way or another, since
      it deals with pages"

Link: https://lore.kernel.org/all/510611.1641942444@warthog.procyon.org.uk/
Tested-by: Dominique Martinet <asmadeus@codewreck.org> # 9p
Tested-by: kafs-testing@auristor.com # afs
Tested-by: Jeff Layton <jlayton@kernel.org> # ceph
Tested-by: Dave Wysochanski <dwysocha@redhat.com> # nfs
Tested-by: Daire Byrne <daire@dneg.com> # nfs

* tag 'fscache-rewrite-20220111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (67 commits)
  9p, afs, ceph, nfs: Use current_is_kswapd() rather than gfpflags_allow_blocking()
  fscache: Add a tracepoint for cookie use/unuse
  fscache: Rewrite documentation
  ceph: add fscache writeback support
  ceph: conversion to new fscache API
  nfs: Implement cache I/O by accessing the cache directly
  nfs: Convert to new fscache volume/cookie API
  9p: Copy local writes to the cache when writing to the server
  9p: Use fscache indexing rewrite and reenable caching
  afs: Skip truncation on the server of data we haven't written yet
  afs: Copy local writes to the cache when writing to the server
  afs: Convert afs to use the new fscache API
  fscache, cachefiles: Display stat of culling events
  fscache, cachefiles: Display stats of no-space events
  cachefiles: Allow cachefiles to actually function
  fscache, cachefiles: Store the volume coherency data
  cachefiles: Implement the I/O routines
  cachefiles: Implement cookie resize for truncate
  cachefiles: Implement begin and end I/O operation
  cachefiles: Implement backing file wrangling
  ...

Pull fuse updates from Miklos Szeredi:

 - Fix a regression introduced in 5.15

 - Extend the size of the FUSE_INIT request to accommodate for more
   flags. There's a slight possibility of a regression for obscure fuse
   servers; if this happens, then more complexity will need to be added
   to the protocol

 - Allow the DAX property to be controlled by the server on a per-inode
   basis in virtiofs

 - Allow sending security context to the server when creating a file or
   directory

* tag 'fuse-update-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  Documentation/filesystem/dax: DAX on virtiofs
  fuse: mark inode DONT_CACHE when per inode DAX hint changes
  fuse: negotiate per inode DAX in FUSE_INIT
  fuse: enable per inode DAX
  fuse: support per inode DAX in fuse protocol
  fuse: make DAX mount option a tri-state
  fuse: add fuse_should_enable_dax() helper
  fuse: Pass correct lend value to filemap_write_and_wait_range()
  fuse: send security context of inode on file
  fuse: extend init flags

Pull UDF / reiserfs updates from Jan Kara:
 "One UDF fix and one reiserfs cleanup"

* tag 'fs_for_v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix error handling in udf_new_inode()
  reiserfs: don't use congestion_wait()

Pull fanotify updates from Jan Kara:
 "Support for new FAN_RENAME fanotify event and support for reporting
  child info in directory fanotify events (FAN_REPORT_TARGET_FID)"

* tag 'fsnotify_for_v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: wire up FAN_RENAME event
  fanotify: report old and/or new parent+name in FAN_RENAME event
  fanotify: record either old name new name or both for FAN_RENAME
  fanotify: record old and new parent and name in FAN_RENAME event
  fanotify: support secondary dir fh and name in fanotify_info
  fanotify: use helpers to parcel fanotify_info buffer
  fanotify: use macros to get the offset to fanotify_info buffer
  fsnotify: generate FS_RENAME event with rich information
  fanotify: introduce group flag FAN_REPORT_TARGET_FID
  fsnotify: separate mark iterator type from object type enum
  fsnotify: clarify object type argument

Pull iomap updates from Matthew Wilcox:
 "Convert xfs/iomap to use folios.

  This should be all that is needed for XFS to use large folios. There
  is no code in this pull request to create large folios, but no
  additional changes should be needed to XFS or iomap once they are
  created.

  Usually this would have come from Darrick, and we had intended that it
  would come that route. Between the holidays and various things which
  Darrick needed to work on, he asked if I could send things directly.

  There weren't any other iomap patches pending for this release, which
  probably also played a role"

* tag 'iomap-5.17' of git://git.infradead.org/users/willy/linux: (26 commits)
  iomap: Inline __iomap_zero_iter into its caller
  xfs: Support large folios
  iomap: Support large folios in invalidatepage
  iomap: Convert iomap_migrate_page() to use folios
  iomap: Convert iomap_add_to_ioend() to take a folio
  iomap: Simplify iomap_do_writepage()
  iomap: Simplify iomap_writepage_map()
  iomap,xfs: Convert ->discard_page to ->discard_folio
  iomap: Convert iomap_write_end_inline to take a folio
  iomap: Convert iomap_write_begin() and iomap_write_end() to folios
  iomap: Convert __iomap_zero_iter to use a folio
  iomap: Allow iomap_write_begin() to be called with the full length
  iomap: Convert iomap_page_mkwrite to use a folio
  iomap: Convert readahead and readpage to use a folio
  iomap: Convert iomap_read_inline_data to take a folio
  iomap: Use folio offsets instead of page offsets
  iomap: Convert bio completions to use folios
  iomap: Pass the iomap_page into iomap_set_range_uptodate
  iomap: Add iomap_invalidate_folio
  iomap: Convert iomap_releasepage to use a folio
  ...

Pull folio conversion updates from Matthew Wilcox:
 "Convert much of the page cache to use folios

  This stops just short of actually enabling large folios. It converts
  everything that I noticed needs to be converted, but there may still
  be places I've overlooked which still have page size assumptions.

  The big change here is using large entries in the page cache XArray
  instead of many small entries. That only affects shmem for now, but
  it's a pretty big change for shmem since it changes where memory needs
  to be allocated (at split time instead of insertion)"

* tag 'folio-5.17' of git://git.infradead.org/users/willy/pagecache: (49 commits)
  mm: Use multi-index entries in the page cache
  XArray: Add xas_advance()
  truncate,shmem: Handle truncates that split large folios
  truncate: Convert invalidate_inode_pages2_range to folios
  fs: Convert vfs_dedupe_file_range_compare to folios
  mm: Remove pagevec_remove_exceptionals()
  mm: Convert find_lock_entries() to use a folio_batch
  filemap: Return only folios from find_get_entries()
  filemap: Convert filemap_get_read_batch() to use a folio_batch
  filemap: Convert filemap_read() to use a folio
  truncate: Add invalidate_complete_folio2()
  truncate: Convert invalidate_inode_pages2_range() to use a folio
  truncate: Skip known-truncated indices
  truncate,shmem: Add truncate_inode_folio()
  shmem: Convert part of shmem_undo_range() to use a folio
  mm: Add unmap_mapping_folio()
  truncate: Add truncate_cleanup_folio()
  filemap: Add filemap_release_folio()
  filemap: Use a folio in filemap_page_mkwrite
  filemap: Use a folio in filemap_map_pages
  ...

Pull SPDX/License update from Greg KH:
 "Here is a single change that fixes up the description of the 'LGPL-2.1
  or later' identifiers so that the tools properly acknowledge that this
  is a valid license.

  This change has been in linux-next for weeks with no reported problems"

* tag 'spdx-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers

Pull USB and Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for
  5.17-rc1.

  Nothing major in here, just lots of little updates and cleanups. These
  include:

   - some USB header fixes picked from Ingo's header-splitup work

   - more USB4/Thunderbolt hardware support added

   - USB gadget driver updates and additions

   - USB typec additions (includes some acpi changes, which were acked
     by the ACPI maintainer)

   - core USB fixes as found by syzbot that were too late for 5.16-final

   - USB dwc3 driver updates

   - USB dwc2 driver updates

   - platform_get_irq() conversions of some USB drivers

   - other minor USB driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
  docs: ABI: fixed formatting in configfs-usb-gadget-uac2
  usb: gadget: u_audio: Subdevice 0 for capture ctls
  usb: gadget: u_audio: fix calculations for small bInterval
  usb: dwc2: gadget: initialize max_speed from params
  usb: dwc2: do not gate off the hardware if it does not support clock gating
  usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
  headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
  USB: common: debug: add needed kernel.h include
  headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
  headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
  headers/prep: usb: gadget: Fix namespace collision
  USB: core: Fix bug in resuming hub's handling of wakeup requests
  USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
  usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
  usb: gadget: clear related members when goto fail
  usb: gadget: don't release an existing dev->buf
  usb: dwc2: Simplify a bitmap declaration
  usb: Remove usb_for_each_port()
  usb: typec: port-mapper: Convert to the component framework
  usb: Link the ports to the connectors they are attached to
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 5.17-rc1.

  Nothing major in here, just lots of good updates and fixes, including:

   - more tty core cleanups from Jiri as well as mxser driver cleanups.
     This is the majority of the core diffstat

   - tty documentation updates from Jiri

   - platform_get_irq() updates

   - various serial driver updates for new features and hardware

   - fifo usage for 8250 console, reducing cpu load a lot

   - LED fix for keyboards, long-time bugfix that went through many
     revisions

   - minor cleanups

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: core: Keep mctrl register state and cached copy in sync
  serial: stm32: correct loop for dma error handling
  serial: stm32: fix flow control transfer in DMA mode
  serial: stm32: rework TX DMA state condition
  serial: stm32: move tx dma terminate DMA to shutdown
  serial: pl011: Drop redundant DTR/RTS preservation on close/open
  serial: pl011: Drop CR register reset on set_termios
  serial: pl010: Drop CR register reset on set_termios
  serial: liteuart: fix MODULE_ALIAS
  serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
  Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
  tty: goldfish: Use platform_get_irq() to get the interrupt
  serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
  tty: serial: meson: Drop the legacy compatible strings and clock code
  serial: pmac_zilog: Use platform_get_irq() to get the interrupt
  serial: bcm63xx: Use platform_get_irq() to get the interrupt
  serial: ar933x: Use platform_get_irq() to get the interrupt
  serial: vt8500: Use platform_get_irq() to get the interrupt
  serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
  serial: pxa: Use platform_get_irq() to get the interrupt
  ...

Pull staging driver updates from Greg KH:
 "Here's the big set of staging driver updates for 5.17-rc1

  Nothing major in here at all, just lots and lots of tiny cleanups.
  Overall more code was removed than added, which is always nice, but
  not a huge change.

  Majority of the work happened in the r8188eu driver, that had hundreds
  of cleanups happen on it, but almost all other staging drivers had
  cleanups as well. No new functionality was added, cleanups only.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (308 commits)
  staging: r8188eu: rename camelcase variable uintPeerChannel
  staging: r8188eu: make BW20_24G_Diff a 1-D array
  staging: r8188eu: make OFDM_24G_Diff a 1-D array
  staging: r8188eu: BW40_24G_Diff is set but not used
  staging: r8188eu: CCK_24G_Diff is set but not used
  staging: r8188eu: make Index24G_BW40_Base a 1-D array
  staging: r8188eu: make Index24G_CCK_Base a 1-D array
  staging: r8188eu: rfPath is always 0
  staging: r8188eu: remove unneeded parameter from rtl8188e_SetHalODMVar
  staging: pi433: add comment to rx_lock mutex definition
  staging: pi433: fix frequency deviation check
  staging: vc04_services: rename BM2835 to BCM2835 in headers comments
  staging: vc04_services: rename string literal containing bm2835_* to bcm2835*_
  staging: vc04_services: rename variables containing bm2835_* to bcm2835_*
  staging: vc04_services: rename functions containing bm2835_* to bcm2835_*
  staging: vc04_services: rename structures bm2835_mmal_dev and bm2835_mmal_v4l2_ctrl
  staging: greybus: audio: Check null pointer
  staging: r8188eu: add spaces around P2P_AP_P2P_CH_SWITCH_PROCESS_WK
  staging: r8188eu: turbo scan is always off for r8188eu
  staging: r8188eu: cmd_issued_cnt is set but not used
  ...

Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of changes for the driver core for 5.17-rc1.

  Lots of little things here, including:

   - kobj_type cleanups

   - auxiliary_bus documentation updates

   - auxiliary_device conversions for some drivers (relevant subsystems
     all have provided acks for these)

   - kernfs lock contention reduction for some workloads

   - other tiny cleanups and changes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
  kobject documentation: remove default_attrs information
  drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
  debugfs: lockdown: Allow reading debugfs files that are not world readable
  driver core: Make bus notifiers in right order in really_probe()
  driver core: Move driver_sysfs_remove() after driver_sysfs_add()
  firmware: edd: remove empty default_attrs array
  firmware: dmi-sysfs: use default_groups in kobj_type
  qemu_fw_cfg: use default_groups in kobj_type
  firmware: memmap: use default_groups in kobj_type
  sh: sq: use default_groups in kobj_type
  headers/uninline: Uninline single-use function: kobject_has_children()
  devtmpfs: mount with noexec and nosuid
  driver core: Simplify async probe test code by using ktime_ms_delta()
  nilfs2: use default_groups in kobj_type
  kobject: remove kset from struct kset_uevent_ops callbacks
  driver core: make kobj_type constant.
  driver core: platform: document registration-failure requirement
  vdpa/mlx5: Use auxiliary_device driver data helpers
  net/mlx5e: Use auxiliary_device driver data helpers
  soundwire: intel: Use auxiliary_device driver data helpers
  ...

Pull pin control bulk updates from Linus Walleij:
 "Core changes:

   - New standard enumerator and corresponding device tree bindings for
     output impedance pin configuration. (Implemented and used in the
     Renesas rzg2l driver.)

   - Cleanup of Kconfig and Makefile to be somewhat orderly and
     alphabetic.

  New drivers:

   - Samsung Exynos 7885 pin controller.

   - Ocelot LAN966x pin controller.

   - Qualcomm SDX65 pin controller.

   - Qualcomm SM8450 pin controller.

   - Qualcomm PM8019, PM8226 and PM2250 pin controllers.

   - NXP/Freescale i.MXRT1050 pin controller.

   - Intel Thunder Bay pin controller.

  Enhancements:

   - Introduction of the string library helper function
     "kasprintf_strarray()" and subsequent use in Rockchip, ST and
     Armada pin control drivers, as well as the GPIO mockup driver.

   - The Ocelot pin controller has been extensively rewritten to use
     regmap and other modern kernel infrastructure.

   - The Microchip SGPIO driver has been converted to use regmap.

   - The SPEAr driver had been converted to use regmap.

   - Substantial cleanups and janitorial on the Apple pin control driver
     that was merged for v5.16.

   - Janitorial to remove of_node assignments in the GPIO portions that
     anyway get this handled in the GPIO core.

   - Minor cleanups and improvements in several pin controllers"

* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
  pinctrl: imx: fix assigning groups names
  dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
  pinctrl: bcm: ns: use generic groups & functions helpers
  pinctrl: imx: fix allocation result check
  pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
  pinctrl: Propagate firmware node from a parent device
  dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
  pinctrl: add one more "const" for generic function groups
  pinctrl: keembay: rework loops looking for groups names
  pinctrl: keembay: comment process of building functions a bit
  pinctrl: imx: prepare for making "group_names" in "function_desc" const
  ARM: dts: gpio-ranges property is now required
  pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
  pinctrl: Get rid of duplicate of_node assignment in the drivers
  pinctrl-sunxi: don't call pinctrl_gpio_direction()
  pinctrl-bcm2835: don't call pinctrl_gpio_direction()
  pinctrl: bcm2835: Silence uninit warning
  pinctrl: Sort Kconfig and Makefile entries alphabetically
  pinctrl: Add Intel Thunder Bay pinctrl driver
  dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
  ...

Commit a5d3d1ad ("leds: lp55xx: Initialize enable GPIO direction to
output") attempts to fix this, but the fix did not work since at least
for the Nokia N900 the value needs to be set to HIGH, per the device
tree. So rather than hardcoding the value to a potentially invalid value
for some devices, let's set direction in lp55xx_init_device.

Fixes: a5d3d1ad ("leds: lp55xx: Initialize enable GPIO direction to output")
Fixes: 92a81562 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3 ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: NMerlijn Wajer <merlijn@wizzup.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NPavel Machek <pavel@ucw.cz>

Since the LED multicolor framework support was added in commit
92a81562 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.

Fixes: 92a81562 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3 ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: NMerlijn Wajer <merlijn@wizzup.org>
Signed-off-by: NSicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: NPavel Machek <pavel@ucw.cz>

output of dev_of_node() is already assigned to "np" variable in
ktd2692_parse_dt(). Use "np" variable to check if OF node is NULL
instead of calling dev_of_node() again.
Signed-off-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: NPavel Machek <pavel@ucw.cz>

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.

For the details one may look into the of_gpio_dev_init() implementation.

Call graph:
   --> sso_gpio_gc_init()
     --> devm_gpiochip_add_data
       --> devm_gpiochip_add_data_with_key
         --> gpiochip_add_data_with_key()
           --> of_gpio_dev_init()
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NPavel Machek <pavel@ucw.cz>

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.

For the details one may look into the of_gpio_dev_init() implementation.

Call graph:
   --> tca6507_probe_gpios()
     --> gpiochip_add_data()
       --> gpiochip_add_data_with_key()
         --> of_gpio_dev_init()
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NPavel Machek <pavel@ucw.cz>

The board file using this driver has been deleted and the
FSG3 LEDs can be modeled using a system controller and some
register bit LEDs in the device tree so this driver is no
longer needed.
Reported-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: Rod Whitby <rod@whitby.id.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NPavel Machek <pavel@ucw.cz>

During code review this unused variable was found. Remove it.
Signed-off-by: NSven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: NPavel Machek <pavel@ucw.cz>

Replace moonlight with indicator in mt6360 example to prevent the below
build error:

Error: Documentation/devicetree/bindings/leds/leds-mt6360.example.dts:114.24-25
syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:385:
Documentation/devicetree/bindings/leds/leds-mt6360.example.dt.yaml]
Error 1

Link: https://lore.kernel.org/lkml/CAL_JsqJRMVE163LaHTbtFARc4f_qg33bfQx+sD3ukce_xQF+gA@mail.gmail.com/Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: NGene Chen <gene_chen@richtek.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NPavel Machek <pavel@ucw.cz>