- 21 1月, 2015 2 次提交
-
-
由 Anton Blanchard 提交于
KSM will only be used on areas marked for merging via madvise, and it is showing nice improvements on KVM workloads, so enable it by default. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
We are starting to see ppc64 boxes with SATA AHCI adapters in it, so enable it in our defconfigs. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 20 1月, 2015 1 次提交
-
-
由 Michael Ellerman 提交于
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 30 11月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
In commit 9c62a68d ("netpoll: Remove dead packet receive code (CONFIG_NETPOLL_TRAP)") this Kconfig option was removed. So remove references to it from all defconfigs as well. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2014 1 次提交
-
-
由 Anton Blanchard 提交于
Now KVM is working on LE, enable it. Also enable transarent hugepage which has already been enabled on BE. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 9月, 2014 1 次提交
-
-
由 Michal Marek 提交于
Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 9月, 2014 1 次提交
-
-
由 Cyril Bur 提交于
CONFIG_FHANDLE is a requirement for systemd and with the increasing uptake of systemd within distros it makes sense for 64 bit defconfigs to include it. Signed-off-by: NCyril Bur <cyril.bur@au1.ibm.com>
-
- 07 4月, 2014 1 次提交
-
-
由 Gautham R. Shenoy 提交于
Enable CPUFreq for PowerNV. Select "performance", "powersave", "userspace" and "ondemand" governors. Choose "ondemand" to be the default governor. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 24 3月, 2014 1 次提交
-
-
由 Anton Blanchard 提交于
Our netfilter options are stale and important things like masquerading are no longer enabled. Instead of trying to keep up with any updates, set CONFIG_NETFILTER_ADVANCED=n on ppc64* and pseries* defconfigs. This enables the most common netfilter modules for us. While here, enable the network bridge module which is heavily used in KVM setups. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 11月, 2013 1 次提交
-
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 10月, 2013 3 次提交
-
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Enable a few modules required to boot on a POWER multipath box. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Run savedefconfig over the ppc64, ppc64e and pseries config Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 26 7月, 2013 1 次提交
-
-
由 Bjorn Helgaas 提交于
Convert CONFIG_HOTPLUG_PCI from tristate to bool. This only affects the hotplug core; several of the hotplug drivers can still be modules. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NYinghai Lu <yinghai@kernel.org>
-
- 25 6月, 2013 1 次提交
-
-
由 Aruna Balakrishnaiah 提交于
Since now we have pstore support for nvram in pseries, enable it in the default config. With this config option enabled, pstore infra-structure will be used to read/write the messages from/to nvram. Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Acked-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 15 2月, 2013 1 次提交
-
-
由 Michael Neuling 提交于
Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 1月, 2013 3 次提交
-
-
由 Anton Blanchard 提交于
powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig We need devtmpfs enabled to boot on recent versions of Fedora. EFI partitions will be useful for large block devices. tmpfs ACL support is used by some distros for managing access to devices. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17 and RHEL6) as well as the x86 defconfigs. Userspace these days is most likely to expect utf8 anyway. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
No changes, just update the configs with savedefconfig. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 15 11月, 2012 1 次提交
-
-
由 Nishanth Aravamudan 提交于
Anticipating growth in coming years, we should ensure we are getting a good lead on testing. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 17 9月, 2012 1 次提交
-
-
由 Michael Neuling 提交于
On POWER6 and POWER7 if the input operand to an instruction is a denormalised single precision binary floating point value we can take a denormalisation exception where it's expected that the hypervisor (HV=1) will fix up the inputs before the instruction is run. This adds code to handle this denormalisation exception for POWER6 and POWER7. It also add a CONFIG_PPC_DENORMALISATION option and sets it in pseries/ppc64_defconfig. This is useful on bare metal systems only. Based on patch from Milton Miller. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 01 8月, 2012 1 次提交
-
-
由 Seth Jennings 提交于
This patch creates a new submenu for the NX cryptographic hardware accelerator and breaks the NX options into their own Kconfig file under drivers/crypto/nx/Kconfig. This will permit additional NX functionality to be easily and more cleanly added in the future without touching drivers/crypto/Makefile|Kconfig. Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 27 7月, 2012 1 次提交
-
-
由 Anton Blanchard 提交于
Enable the hardware RNG and crypto modules. I verified they both autoload via the VIO subsystem, so there is no need to build them in. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 03 7月, 2012 1 次提交
-
-
由 Anton Blanchard 提交于
When looking through some instruction traces I noticed our tracepoint checks were inline. It turns out we don't have CONFIG_JUMP_LABEL enabled. By enabling CONFIG_JUMP_LABEL we replace a load/compare/branch with a nop at every tracepoint call. For example in do_IRQ: CONFIG_JUMP_LABEL disabled: stdx 3,11,9 lwz 0,8(29) cmpwi 7,0,0 bne- 7,.L124 bl .irq_enter CONFIG_JUMP_LABEL enabled: stdx 3,11,9 nop bl .irq_enter Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 3月, 2012 1 次提交
-
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 08 12月, 2011 1 次提交
-
-
由 Anton Blanchard 提交于
Most distros use it so we may as well enable it and get regular compile testing. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 08 11月, 2011 1 次提交
-
-
由 Michael Neuling 提交于
Add HV mode KVM to Book3 server 64bit defconfigs as a module. Doesn't add much to the size: text data bss dec hex filename 8244109 4686767 994000 13924876 d47a0c vmlinux.vanilla 8256092 4691607 994128 13941827 d4bc43 vmlinux.kvm This should enable more testing of this configuration. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 19 7月, 2011 2 次提交
-
-
由 Anton Blanchard 提交于
As a result of changes to Kconfig files, we no longer enable the lockup and hung task detectors. Both are very light weight and provide useful information in the event of a hang, so reenable them. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Add mpt2sas driver to pseries and ppc64 defconfig. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 6月, 2011 1 次提交
-
-
由 Michael Neuling 提交于
Remove duplicate assignment of SCSI_BNX2_ISCSI in pseries_defconfig introduced by: 37e0c21e powerpc/pseries: Enable iSCSI support for a number of cards causes warning: arch/powerpc/configs/pseries_defconfig:151:warning: override: reassigning to symbol SCSI_BNX2_ISCSI Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 5月, 2011 1 次提交
-
-
由 Daniel Lezcano 提交于
The ns_cgroup is an annoying cgroup at the namespace / cgroup frontier and leads to some problems: * cgroup creation is out-of-control * cgroup name can conflict when pids are looping * it is not possible to have a single process handling a lot of namespaces without falling in a exponential creation time * we may want to create a namespace without creating a cgroup The ns_cgroup was replaced by a compatibility flag 'clone_children', where a newly created cgroup will copy the parent cgroup values. The userspace has to manually create a cgroup and add a task to the 'tasks' file. This patch removes the ns_cgroup as suggested in the following thread: https://lists.linux-foundation.org/pipermail/containers/2009-June/018616.html The 'cgroup_clone' function is removed because it is no longer used. This is a userspace-visible change. Commit 45531757 ("cgroup: notify ns_cgroup deprecated") (merged into 2.6.27) caused the kernel to emit a printk warning users that the feature is planned for removal. Since that time we have heard from XXX users who were affected by this. Signed-off-by: NDaniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: NSerge E. Hallyn <serge.hallyn@canonical.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jamal Hadi Salim <hadi@cyberus.ca> Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPaul Menage <menage@google.com> Acked-by: NMatt Helsley <matthltc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 5月, 2011 2 次提交
-
-
由 Anton Blanchard 提交于
Enable iSCSI support for a number of cards. We had the base networking devices enabled but forgot to enable iSCSI. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Enable the Qlogic and Emulex 10Gbit adapters. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 3月, 2011 1 次提交
-
-
由 Anton Blanchard 提交于
Ensure the Chelsio T3/T4 network drivers and iWARP drivers are enabled in the pseries config. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 1月, 2011 3 次提交
-
-
由 Nishanth Aravamudan 提交于
Upcoming servers will include a Broadcom NIC, add to the defconfig to increase testing coverage and make sure mainline builds come up with networking. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
- Enable 64kB pages so it gets some regular testing. - The largest POWER7 has 1024 threads so bump NR_CPUS it to match. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
IRQSOFF_TRACER and STACK_TRACER force the kernel to be built with -pg which is a substantial overhead. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 8月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This trims all our defconfigs using make savedefconfig Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 15 6月, 2010 1 次提交
-
-
由 Grant Likely 提交于
Acked-by: NGrant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 5月, 2010 1 次提交
-
-
由 Michael Neuling 提交于
The e1000e device is becoming more common these days, so let's just build it in for pseries & ppc64_defconfig. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-