driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I72OPH
CVE: NA

----------------------------------------------------------------------

After the wol is commit to the linux community,
the code is different from the openEuler.
This patch synchronizes the kernel differences to the openEuler.
Signed-off-by: NHao Lan <lanhao@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I6YE0O
CVE: NA

----------------------------------------------------------------------

Add extend interface support for read and write
phy register with page. Sofar it supports only
Phy RTL8211 and YT8521.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I6YE0O
CVE: NA

----------------------------------------------------------------------

When the link status of the PF network port changes from up to down,
the IMP can quickly report the link down fault cause based on the
link status. If the hardware is faulty from the beginning and the
link is not up, the IMP does not report the link down event
because the status is not changed.

Therefore, an interface is provided to detect port faults.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I6A42Q
CVE: NA

----------------------------------------------------------------------

FD counter is used to count the number of times that the Flow Table rule
is hit. It is helpful when user want to take the accurate statistics of
some rules.
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I63AH1
CVE: NA

----------------------------------------------------------------------

Implement configuration and query WOL by ethtool and
added the needed device commands and structures to hns3.
Add it do not support suspend resume interface.
Signed-off-by: NHao Lan <lanhao@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

When serdes lane support setting 25Gb/s、50Gb/s speed and user wants to
set port speed as 50Gb/s, it can be setted as one 50Gb/s serdes lane or
two 25Gb/s serdes lanes.

So, this patch adds support to query and set lane number by sysfs
to satisfy this scenario.
Signed-off-by: NHao Chen <chenhao418@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

For the fd rule of queue bonding is created by hardware
automatically, the driver needs to specify the fd counter
for each function, then it's available to query how many
times the queue bonding fd rules hit.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

For device version V3, it supports queue bonding, which can
identify the tuple information of TCP stream, and create flow
director rules automatically, in order to keep the tx and rx
packets are in the same queue pair. The driver set FD_ADD
field of TX BD for TCP SYN packet, and set FD_DEL filed for
TCP FIN or RST packet. The hardware create or remove a fd rule
according to the TX BD, and it also support to age-out a rule
if not hit for a long time.

The queue bonding mode is default to be disabled, and can be
enabled/disabled with ethtool priv-flags command.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

In ROH mode, MAC address is related to the EID. If an
invalid MAC address is set, the mapping between MAC and
EID cannot be ensured, and communication may be abnormal.
Therefore, firmware verification is required to intercept
invalid MAC address set by user.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

HNAE3 framework supports ROH clients to register with HNAE3
devices and their associated operations.

The ROH driver works as a client at the HNAE layer. The NIC
driver needs to provide some necessary information, such as
the vector base address, and suppor the registration of the
ROH client.

This patch also supports roh device IDs in the hns3 and hclge
modules.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit 5c4f7284
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5c4f72842d1d

----------------------------------------------------------------------

This patch supports llrs fec mode in speed 200G for some new devices, and
suppoprts querying llrs fec ability from firmware.
Signed-off-by: NHao Lan <lanhao@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit eaf83ae5
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=eaf83ae59e18

----------------------------------------------------------------------

For some new devices, driver can queries fec ability from firmware to
decide which FEC mode can be supported.

If devices of old version which not support querying fec ability, driver
sets fixed ability according to current speed.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 43710bfe
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4Q02P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=43710bfebf23

----------------------------------------------------------------------

Currently PF and VF use two sets of command code for modules to interact
with firmware. These codes values are same espect the macro names. It is
redundent to keep two sets of command code for same functions between PF
and VF.

So this patch firstly creates a unified command code for PF and VF module.
We keep the macro name same with the PF command code name to avoid too many
meaningless modifications. Secondly the new common command codes are used
to replace the old ones in VF and deletes the old ones.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 07dce03c
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4Q02P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=07dce03cd5aa

----------------------------------------------------------------------

This patch uses common rss init APIs to replace the old APIs in PF rss
module and deletes the old PF rss init APIs. Some related subfunctions and
macros are also modified in this patch.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1813ee52
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4Q02P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1813ee524331

----------------------------------------------------------------------

This patch uses new common rss set APIs to replace the old APIs in PF rss
module and deletes the old rss set APIs. The related macros are also
modified.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-br26_refactor2
commit 8e2288ca
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4Q02P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8e2288cad6cb

----------------------------------------------------------------------

This patch uses common cmdq init and uninit APIs to replace the old APIs in
PF cmdq module init and uninit modules. Then the old PF init and uninit
APIs is deleted.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-br26_refactor2
commit d3c69a88
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4Q02P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d3c69a8812c2

----------------------------------------------------------------------

This patch uses common cmdq resource allocate/free/query APIs to replace
the old APIs in PF cmdq module and deletes the old cmdq resource APIs.
Still we kept hclge_cmd_setup_basic_desc name as a seam API to avoid too
many meaningless replacement.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-br26_refactor2
commit eaa5607d
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4Q02P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=eaa5607db377

----------------------------------------------------------------------

This patch firstly uses new hardware description struct hclge_comm_hw as
child member of hclge_hw and deletes the original child memebers of
hclge_hw. All the hclge_hw variables used in PF module is modified
according to the new hclge_hw.

Secondly hclge_cmd_send is refactored to use hclge_comm_cmd_send APIs. The
old functions called by hclge_cmd_send are deleted and hclge_cmd_send is
kept to avoid too many meaningless modifications.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-br26_refactor2
commit 0a7b6d22
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4Q02P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0a7b6d221868

----------------------------------------------------------------------

Currently PF and VF cmdq APIs use struct hclge(vf)_hw to describe cmdq
hardware information needed by hclge(vf)_cmd_send. There are a little
differences between its child struct hclge_cmq_ring and hclgevf_cmq_ring.
It is redundent to use two sets of structures to support same functions.

So this patch creates new set of common cmdq hardware description
structures(hclge_comm_hw) to unify PF and VF cmdq functions. The struct
hclge_desc is still kept to avoid too many meaningless replacement.

These new structures will be used to unify hclge(vf)_hw structures in PF
and VF cmdq APIs in next patches.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 3b6db4a0
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4I7P7
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3b6db4a0492b

----------------------------------------------------------------------

When the driver processes rx packets, the head pointer is updated only
after the number of received packets reaches 16. However, hardware
relies on the head pointer to calculate the number of FBDs. As a result,
the hardware calculates the FBD incorrectly. Therefore, the driver
proactively updates the head pointer in each common poll to ensure that
the number of FBDs calculated by the hardware is correct.

Fixes: 68752b24 ("net: hns3: schedule the polling again when allocation fails")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit c8af2887
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4I7P7
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c8af2887c941

----------------------------------------------------------------------

The mac statistics add pause/pfc durations in device version V3, we can
get total active cycle of pause/pfc from these durations.

As driver gets register number from firmware to calculate desc number to
query mac statistics, it needs to set mac statistics extended enable bit
in firmware command 0x701A to tell firmware that driver supports extended
mac statistics, otherwise firmware only returns register number of
version V1.

As pause/pfc durations are not supported by hardware of old version, they
should not been shown in command "ethtool -S ethX" in this case, so add
checking max register number of each mac statistic in their version.
If the max register number of one mac statistic is greater than register
number got from firmware, it means hardware does not support this mac
statistic, so ignore this statistic when get string and data of mac
statistic.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 5c56ff48
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4I7P7
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5c56ff486dfc

----------------------------------------------------------------------

The new firmware supports to divides the whole multicast MAC address space
equally to functions of all PFs, and calculates the space size of each PF
according to its function number.

To support this feature, PF driver adds querying multicast MAC address
space size from firmware and limits used number according to space size.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e435a6b5
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4I7P7
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e435a6b5315a

----------------------------------------------------------------------

Currently, there are two ways for PF to set the unicast MAC address space
size: specified by config parameters in firmware or set to default value.

That's mean if the config parameters in firmware is zero, driver will
divide the whole unicast MAC address space equally to 8 PFs. However, in
this case, the unicast MAC address space will be wasted a lot when the
hardware actually has less then 8 PFs. And in the other hand, if one PF has
much more VFs than other PFs, then each function of this PF will has much
less address space than other PFs.

In order to ameliorate the above two situations, introduce the third way
of unicast MAC address space assignment: firmware divides the whole unicast
MAC address space equally to functions of all PFs, and calculates the space
size of each PF according to its function number. PF queries the space size
by the querying device specification command when in initialization
process.

The third way assignment is lower priority than specified by config
parameters, only if the config parameters is zero can be used, and if
firmware does not support the third way assignment, then driver still
divides the whole unicast MAC address space equally to 8 PFs.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit 0cb07041
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0cb0704149f0d9d3b7c68ebab932fc27222c740b

----------------------------------------------------------------------

Add some required spaces in comment for cleanup.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit e1d93bc6
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e1d93bc6ef3bf497675f9ac2b35b79c48577b970

----------------------------------------------------------------------

The function hclge_parse_capability() uses too many if statement, and
it may add more in the future. To improve code readability, maintainability
and simplicity, refactor this function by using a bit mapping array of IMP
capabilities and driver capabilities.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit 5a24b1fd
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5a24b1fd301e0cf0fc58a76f2716c54d378002cf

----------------------------------------------------------------------

There are some repetitive macros have same meaning and value, this patch
merges them to make code clean.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit 4c116f85
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4c116f85ecf8c147450602ed47ee25de60807f45

----------------------------------------------------------------------

To improve code readability, replace digital numbers of mac speeds
defined by firmware command with macros.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14
commit a96d9330
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a96d9330b02a3d051ae689bc2c5e7d3a2ba25594

----------------------------------------------------------------------

After the cmdq registers are cleared, the firmware may take time to
clear out possible left over commands in the cmdq. Driver must release
cmdq memory only after firmware has completed processing of left over
commands.

Fixes: 232d0d55 ("net: hns3: uninitialize command queue while unloading PF driver")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14
commit 1a6d2819
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1a6d281946c330cee2855f6d0cd796616e54601f

----------------------------------------------------------------------

If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit f5c2b9f0
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5c2b9f0fc078308a88de807d60cd4e352a165fc

----------------------------------------------------------------------

In order to know the reason of link up failure, add supporting ethtool
extended link state. Driver reads the link status code from firmware if
in link down state and converts it to ethtool extended link state.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 03a92fe8
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=03a92fe8cedb6f619df416d38d0b57fd55070cd7

----------------------------------------------------------------------

Previously, the flow director counter is not enabled. To improve the
maintainability for chechking whether flow director hit or not, enable
flow director counter for each function, and add debugfs query inerface
to query the counters for each function.

The debugfs command is below:
cat fd_counter
func_id    hit_times
pf         0
vf0        0
vf1        0
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1a00197b
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1a00197b7d2fe57f0be93037d5090e19a9b178c8

----------------------------------------------------------------------

Add support to query tx spare buffer size from configuration
file, and use this info to do spare buffer initialization when
the module parameter 'tx_spare_buf_size' is not specified.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0bf5eb78
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0bf5eb788512187b744ef7f79de835e6cbe85b9c

----------------------------------------------------------------------

Adds PTP support for HNS3 ethernet driver.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e65e9f5c
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e65e9f5c2e4efc17657d016d767eb7010d9dd598

----------------------------------------------------------------------

IMP(Intelligent Management Processor) firmware add a new feature to
handle and consolidate RAS information for new devices, NIC driver
only needs to query the reported RAS information. NIC driver adds
support for this feature.

Driver queries device capability to check whether IMP support this
feature, If yes, execute the new RAS processing branch.

In order to add a method to check whether PF supports imp-handle RAS
feature, add dumping this info in debugfs.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2e2deee7
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2e2deee7618b062efe3aba9fcb017dadcf148819

----------------------------------------------------------------------

To adapt to hardware modification and ensure that the driver is
compatible with the original error handling content, we need to add the
RAS compatibility adaptation solution.

Add a processing branch to the driver during error handling. In the new
processing branch, NIC fault information is integrated by the IMP. An
interaction command is added between the driver and IMP to query
and clear the fault source and interrupt source. The IMP integrates
error information and reports the highest reset level to the driver.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2ba30662
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2ba306627f5950c9a7850f3b0499d39e522dc249

----------------------------------------------------------------------

Previously, with hardware limitation, the port VLAN filter are
effective for both PF and its VFs simultaneously, so a single
function is not able to enable/disable separately, and the VLAN
filter state is default enabled. Now some device supports each
function to bypass port VLAN filter, then each function can
switch VLAN filter separately. Add capability flag to check
whether the device supports modify VLAN filter state. If flag
on, user will be able to modify the VLAN filter state by ethtool
-K.

Furtherly, the default VLAN filter state is also changed
according to whether non-zero VLAN used. Then the device can
receive packet with any VLAN tag if only VLAN 0 used.

The function hclge_need_enable_vport_vlan_filter() is used to
help implement above changes. And the VLAN filter handle for
promisc mode can also be simplified by this function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0b198b0d
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0b198b0d80ea091f2a917536a097adefb2eaa52f

----------------------------------------------------------------------

Currently, the debugfs command for m7 info is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"imp_info" for it, and query it by command "cat imp_info",
return the result to userspace, rather than record in dmesg.

The display style is below:
$cat imp_info
offset | data
0x0000 | 0x00000000  0x00000000
0x0008 | 0x00000000  0x00000000
0x0010 | 0x00000000  0x00000001
0x0018 | 0x00000000  0x00000000
0x0020 | 0x00000000  0x00000000
0x0028 | 0x00000000  0x00000000
0x0030 | 0x00000000  0x00000000
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 79664077
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=796640778c26f3d99fde173bb7b1d726b5f0d816

----------------------------------------------------------------------

Currently, the driver gets packet type by parsing the
L3_ID/L4_ID/OL3_ID/OL4_ID from RX descriptor, it's
time-consuming.

Now some new devices support RXD advanced layout, which combines
previous OL3_ID/OL4_ID to 8bit ptype field, so the driver gets
packet type by looking up only one table, and L3_ID/L4_ID become
reserved fields.

Considering compatibility, the firmware will report capability of
RXD advanced layout, the driver will identify and enable it by
default. This patch provides basic function: identify and enable
the RXD advanced layout, and refactor out hns3_rx_checksum() by
using ptype table to handle RX checksum if supported.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8fa86551
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8fa865510069aa1364f50761d38418dec4c163df

----------------------------------------------------------------------

Currently, the queue reset process needs to be performed one by
one, which is inefficient. However, the queue reset of the same
function is always performed at the same time. Therefore, according
to the UM, command HCLGE_OPC_CFG_RST_TRIGGER can be used to reset
all queues of the same function at a time, in order to optimize
the queue reset process.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 43f8b933
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=43f8b9333d86d4e3a42e55a6e41c78c249ac0216

----------------------------------------------------------------------

Vmdq is not supported yet, the num_vmdq_vport is always 0,
it's a bit confusing when using the num_vport, so remove
these unused codes of vmdq.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>