No functional change.

Just sorting this "if" block from newer to older platform.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-2-rodrigo.vivi@intel.com

No functional change.

Just sorting this "if" block from newer to older platform.

v2: Invert gen9_bc and gen9_lp (Ville)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-1-rodrigo.vivi@intel.com

This patch defines DSI_CMD_RXCTL, DSI_CMD_TXCTL registers,
bitfields, masks and macros used for configuring DSI panel.

v2: Define remaining bitfields

v3 by Jani:
 - Alignment fix
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/37b41fe08ce50c3d9ef7d55c03d12a8a10a252d6.1539613303.git.jani.nikula@intel.com

This patch enables DSI transcoders by writing to
TRANS_CONF registers and wait for its state to be enabled.

v2 by Jani:
 - Rebase
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b8ea0298ef9d6832a2dd69c923832d0b7b58184.1539613303.git.jani.nikula@intel.com

This patch defines TRANS_CONF registers for DSI ports
0 and 1. Bitfields of these registers used for enabling
and reading the current state of transcoder.

v2: Add blank line before comment

v3 by Jani:
 - Move DSI specific .pipe_offsets to GEN11_FEATURES
 - Macro placement and comment juggling
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com

As part of DSI enable sequence, transcoder timings
(horizontal & vertical) need to be set so that transcoder
will generate the stream output as per those timings.
This patch set required transcoder timings as per BSPEC.

v2: Remove TRANS_TIMING_SHIFT usage

v3 by Jani:
 - Rebase
 - Reduce temp variable use
 - Checkpatch fix
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/525949ae4e919a4f2b807d606234322534656048.1539613303.git.jani.nikula@intel.com

This patch defines registers and bitfields used for
programming DSI transcoder's horizontal and vertical
timings.

v2: Remove TRANS_TIMING_SHIFT definition

v3 by Jani:
 - Group macros by transcoder
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dcc329280e3aca5b4fc3482c5bcaa0cac043c5d8.1539613303.git.jani.nikula@intel.com

This patch select input PIPE for DSI, data lanes width,
enable port sync mode and wait for DSI link to become ready.

v2 by Jani:
 - Use MISSING_CASE with fallthrough instead of DRM_ERROR
 - minor stylistic changes
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/080320dc9a9e321dbe73567c6a7aa1dcff0f21c2.1539613303.git.jani.nikula@intel.com

This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2
registers and their bitfields for DSI. These registers are used
for enabling port sync mode, input pipe select, data lane width
configuration etc.

v2: Changes:
    - Remove redundant extra line
    - Correct some of bitfield definition

v3 by Jani:
 - Move DSI transcoder offsets to GEN11_FEATURES
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com

We wrongly assumed that GuC is only using last scratch register
for G2H messages, but in fact it is also using register [14] to
report sleep state status. Remove that register from our H2G
send registers pool.

v2: No message from host to GuC uses more than 8 registers and
the GuC FW itself uses an 8-element array to store the H2G message,
so we may reduce our send array to just 8 registers (Daniele)
v3: use explicit define (Daniele)
v4: and explicit comment (Daniele)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019101725.14024-1-michal.wajdeczko@intel.com

This patch programs DSI operation mode, pixel format,
BGR info, link calibration etc for the DSI transcoder.
This patch also extract BGR info of the DSI panel from
VBT and save it inside struct intel_dsi which used for
configuring DSI transcoder.

v2: Rebase
v3: Use newly defined bitfields.

v4 by Jani:
 - Use intel_dsi_bitrate()
 - Make bgr_enabled bool
 - Use 0 instead of 0x0
 - Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode
 - Use is_vid_mode()
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7de4e39a4b2a18e53a2b9d9cea5b5b4c9d6eeb34.1539613303.git.jani.nikula@intel.com

This patch defines transcoder function configuration
registers and its bitfields for both DSI ports.
Used while programming/enabling DSI transcoder.

v2: Changes (Jani N)
    - Define _SHIFT and _MASK for bitfields
    - Define values for fields already shifted in place

v3 by Jani:
 - Fix _SHIFT fields copy-pasted from _MASK
 - Indentation fixes
 - Reduce S3D orientation to single macro
 - Wrap a macro parameter in parens
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f188d3e59f27cbcac87d331af3d0222249db7fe4.1539613303.git.jani.nikula@intel.com

This patch adds _MMIO_DSI macros for accessing DSI
transcoder registers.

v2: Use _MMIO_TRANS() (Ville)

Credits-to: Jani N

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3ab94184357d63f2f87b90ef6f5029fb19bef73a.1539613303.git.jani.nikula@intel.com

This patch adds a helper function to retrieve DSI
transcoder for a given DSI port using newly defined
enum names for DSI transcoders.
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f88ff26fa10c68e37b7838bb7c8573c881474e73.1539613303.git.jani.nikula@intel.com

This patch programs D-PHY timing parameters for the
bus turn around flow(in escape clocks) only if dsi link
frequency <=800 MHz using DPHY_TA_TIMING_PARAM and its
identical register DSI_TA_TIMING_PARAM (inside DSI
Controller within the Display Core).

v2: Changes
    - Don't use KHz() macro (Ville/Jani N)
    - Use newly defined bitfields

v3 by Jani:
 - Use intel_dsi_bitrate() in favor of a new field
 - Remove redundant parens
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c777092a748dfc973714399d8c19ed7a8c31a10.1539613303.git.jani.nikula@intel.com

This patch programs D-PHY timing parameters for the
clock and data lane (in escape clocks) of DSI
controller (DSI port 0 and 1).
These programmed timings would be used by DSI Controller
to calculate link transition latencies of the data and
clock lanes.

v2: Use newly defined bitfields for data and clock lane

v3 by Jani:
 - Rebase on dphy abstraction
 - Reduce local variables
 - Remove unrelated comment changes (Ville)
 - Use the same style for range checks as VLV (Ville)
 - Assign, don't OR dphy_reg contents
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70d491e2357f328a63b67ea3c43cb57a1d469c15.1539613303.git.jani.nikula@intel.com

This patch moves couple of legacy DSI functions to header and common DSI
files so that they can be re-used by Gen11 DSI. No functional change.

v2 by Jani:
 - Move intel_dsi_msleep() to intel_dsi_vbt.c
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bd1f5f3e96d3e1de4d359f4fd1b750ac7e3c87d4.1539613303.git.jani.nikula@intel.com

Will be needed in the future. No functional changes.

Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2cb427e5bc2ea88e4226bfcf162b3a6f307e32e1.1539613303.git.jani.nikula@intel.com

Currently the guest couldn't boot up under GVT-g environment as the
following call trace exists:
[  272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
[  272.504834] Call Trace:
[  272.504852]  execlists_context_pin+0x2b2/0x520 [i915]
[  272.504869]  intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915]
[  272.504887]  intel_vgpu_create_workload+0x3e2/0x570 [i915]
[  272.504901]  intel_vgpu_submit_execlist+0xc0/0x2a0 [i915]
[  272.504916]  elsp_mmio_write+0xc7/0x130 [i915]
[  272.504930]  intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915]
[  272.504944]  intel_vgpu_emulate_mmio_write+0xac/0x240 [i915]
[  272.504947]  intel_vgpu_rw+0x22d/0x270 [kvmgt]
[  272.504949]  intel_vgpu_write+0x164/0x1f0 [kvmgt]

GVT GEM context is created by i915_gem_context_create_gvt() which
doesn't allocate ppgtt. So GVT GEM context structure doesn't have
a valid i915_hw_ppgtt.

This patch create ppgtt table at GVT GEM context creation, then assign
shadow ppgtt's root table address to this ppgtt when shadow ppgtt will
be used on GPU. So GVT GEM context has valid ppgtt address. But note
that this ppgtt only contain valid ppgtt root table address, the table
entry in this ppgtt structure are invalid.

Fixes:4a3d3f67("drm/i915: Match code to comment and enforce ppgtt for execlists")
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1539841231-3157-1-git-send-email-xiong.y.zhang@intel.com

Replace the kvmalloc_array() with i915_gem_object_get_dma_address() when
populating rotated vmas. One random access mechanism ought to be enough
for everyone?

To calculate the size of the radix tree I think we can do
something like this (assuming 64bit pointers):
 num_pages = obj_size / 4096
 tree_height = ceil(log64(num_pages))
 num_nodes = sum(64^n, n, 0, tree_height-1)
 tree_size = num_nodes * 576

If we compare that with the object size we should get a relative
overhead of around .2% to 1% for reasonable sized objects,
which framebuffers tend to be.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016150413.11577-1-ville.syrjala@linux.intel.comReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Use single exit point to drop rpm wakeref in case of an error.

Fixes: 9d3eb2c3 ("drm/i915: Hold rpm wakeref for debugfs/i915_drop_caches_set")
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018092025.24076-1-joonas.lahtinen@linux.intel.com

The test requires driver tweaks to avoid causing error messages
on intentionally-triggered errors and to stop accessing non
existing register. However, this is a pure GuC FW interface test
and should be covered by FW validation, so it isn't really worth
tweaking the driver for it and we're better off dropping it instead.

Testing the driver running out of doorbells is already covered by
igt_guc_doorbells
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018004610.22895-1-daniele.ceraolospurio@intel.com

intel_dsi_vbt_init() has grown too unwieldy, and it's about to be
modified due to ICL DSI. Abstract out the VLV specific dphy param
init. No functional changes. Intentionally no stylistic changes during
code movement.

Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/96d15760db027a137f298ec330520ef8ec6474b0.1539613303.git.jani.nikula@intel.com

Abstract bitrate calculation to a newly resurrected intel_dsi.c file
that will contain common code for VLV and ICL DSI.

No functional changes.

Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/100e9721dfdec4f3987549ef24291bafc9cb0517.1539613303.git.jani.nikula@intel.com

Encoders are not alike, make enable and disable hooks optional like
other hooks. Utilize this in DSI code, and remove the silly nop hook.

v2: Add the check also to intel_sanitize_encoder() (Madhav)
Reviewed-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Acked-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016124134.10257-1-jani.nikula@intel.com

Pass the type we want to simplify. No functional changes.

v2: s/dev_priv/i915/g (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017093539.5468-1-jani.nikula@intel.com

In response for I915_PARAM_HAS_HUC we are returning value that
indicates if HuC firmware was loaded and verified. However, our
previously used positive value was based on specific register bit
which is about to change on future platform. Let's normalize our
return values to 0 and 1 before clients will start to use Gen9 value.

v2: use bool for implicit conversion (Chris)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Haihao Xiang <haihao.xiang@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> #1
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017195245.39644-1-michal.wajdeczko@intel.com

GEM_WARN_ON currently has dangerous semantics where it is completely
compiled out on !GEM_DEBUG builds. This can leave users who expect it to
be more like a WARN_ON, just without a warning in non-debug builds, in
complete ignorance.

Another gotcha with it is that it cannot be used as a statement. Which is
again different from a standard kernel WARN_ON.

This patch fixes both problems by making it behave as one would expect.

It can now be used both as an expression and as statement, and also the
condition evaluates properly in all builds - code under the conditional
will therefore not unexpectedly disappear.

To satisfy call sites which really want the code under the conditional to
completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the
callers to it. This one can also be used as both expression and statement.

>From the above it follows GEM_DEBUG_WARN_ON should be used in situations
where we are certain the condition will be hit during development, but at
a place in code where error can be handled to the benefit of not crashing
the machine.

GEM_WARN_ON on the other hand should be used where condition may happen in
production and we just want to distinguish the level of debugging output
emitted between the production and debug build.

v2:
 * Dropped BUG_ON hunk.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: NTomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com

Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.

Fixes: fb5c8e9d ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com

Unfortunately, it appears our fix in:
commit b5d29843 ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")

Which attempted to work around the problems introduced by:
commit 4d802739 ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")

Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().

So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.

Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.

Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
  patchset in igt@drv_module_reload@basic-reload-inject and
  igt@drv_module_reload@basic-reload by checking if the connector is
  registered instead of unregistered, as calling drm_connector_cleanup()
  on a connector that hasn't been registered with userspace yet should
  stay valid.
- Remove unregistered_connector_check(), and just go back to what we
  were doing before in commit 4d802739 ("drm/atomic_helper: Disallow
  new modesets on unregistered connectors") except replacing
  READ_ONCE(connector->registered) with drm_connector_is_unregistered().
  This gets rid of the behavior of allowing DPMS On<->Off, but that should
  be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.

Fixes: b5d29843 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com

The ENTER/EXIT_S_STATE actions queue the save/restore operation in GuC
FW and then return, so waiting on the H2G is not enough to guarantee
GuC is done.
When all the processing is done, GuC writes 0 to scratch register 14,
so we can poll on that. Note that GuC does not ensure that the value
in the register is different from 0 while the action is in progress
so we need to take care of that ourselves as well.

v2: improve comment, return early on GuC error and improve error
    message (Michal)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016224648.2326-1-daniele.ceraolospurio@intel.com

Wait for idle, and iterate over connectors instead of encoders.
With this information we know crtc->state is the actual state,
and we can enable/disable drrs safely.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-2-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.

The problem was bisected to
commit 011f22eb ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.

Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dff ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com

In commit 4502e9ec ("drm/i915/uc: Unify firmware loading") we
stopped converting errors detected during firmware transfer into
-EAGAIN and this indirectly killed our workarounds for Gen9 GuC.
Reactivate those workarounds by looking for actual -ETIMEDOUT error.

Testcase: igt@drv_selftest@live_hangcheck
Reported-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
References: commit 4502e9ec ("drm/i915/uc: Unify firmware loading")
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016085931.23532-1-michal.wajdeczko@intel.com

Reduce intel_display.c by splitting out intel_quirks.c. No functional
changes.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016144228.18267-1-jani.nikula@intel.com

Clang build with UBSAN enabled leads to the following build error:

drivers/gpu/drm/i915/intel_engine_cs.o: In function `intel_engine_init_execlist':
drivers/gpu/drm/i915/intel_engine_cs.c:411: undefined reference to `__compiletime_assert_411'

Again, for this to work the code would first need to be inlined and then
constant folded, which doesn't work for Clang because semantic analysis
happens before optimization/inlining.

Use GEM_BUG_ON() instead of BUILD_BUG_ON().

v2: Use is_power_of_2() from log2.h (Chris)

References: http://mid.mail-archive.com/20181015203410.155997-1-swboyd@chromium.orgReported-by: NStephen Boyd <swboyd@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: NNathan Chancellor <natechancellor@gmail.com>
Tested-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-2-jani.nikula@intel.com

When building the kernel with Clang with defconfig and CONFIG_64BIT
disabled, vmlinux fails to link because of the BUILD_BUG in
_print_param.

ld: drivers/gpu/drm/i915/i915_params.o: in function `i915_params_dump':
i915_params.c:(.text+0x56): undefined reference to
`__compiletime_assert_191'

This function is semantically invalid unless the code is first inlined
then constant folded, which doesn't work for Clang because semantic
analysis happens before optimization/inlining.

[The above written by Nathan Chancellor <natechancellor@gmail.com>]

Use WARN_ONCE() instead of BUILD_BUG() to avoid the problem. The
WARN_ONCE() should get optimized away unless there's a type that's not
handled by _print_param().

References: https://github.com/ClangBuiltLinux/linux/issues/191
References: http://mid.mail-archive.com/20181009171401.14980-1-natechancellor@gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Reported-by: NNathan Chancellor <natechancellor@gmail.com>
Tested-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-1-jani.nikula@intel.com

Rename intel_get_pipe_from_connector() to intel_connector_get_pipe() and
move it near its connector function friends in intel_connector.c. No
functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016145044.3924-1-jani.nikula@intel.com

DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.

v2: Add fixes tag (Lucas)

Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com

combo-phy register instances are at same offset from base for each
combo-phy port, i.e.

Port A base offset: 0x16200
Port B base offset: 0x6C000

All the other addresses for both ports can be derived by calculating
offset to these base addresses.

PORT_CL_DW_OFFSET	0x0
PORT_CL_DW<x>		0 + x * 4

PORT_COMP_OFFSET	0x100
PORT_COMP_DW<x>		0x100 + x * 4

PORT_PCS_AUX_OFFSET     0x300
PORT_PCS_GRP_OFFSET     0x600
PORT_PCS_LN<y>_OFFSET   0x800 + y * 0x100

PORT_TX_AUX_OFFSET      0x380
PORT_TX_GRP_OFFSET      0x680
PORT_TX_LN<y>_OFFSET    0x880 + y * 0x100

And inside each PORT_TX_[AUX|GRP|LN] we add `dw * 4`.

Based on original patch by Mahesh Kumar <mahesh1.kumar@intel.com>.

v2: make port, dw and ln arguments follow the order in
    register's name
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023517.8576-1-lucas.demarchi@intel.com