Merge branches 'clk-uniphier', 'clk-warn-critical', 'clk-ux500', 'clk-kconfig' and 'clk-at91' into clk-next

 - Warn about critical clks that fail to enable or prepare
 - Detect more PRMCU variants in ux500 driver

* clk-uniphier:
  clk: uniphier: Add SCSSI clock gate for each channel

* clk-warn-critical:
  clk: Warn about critical clks that fail to enable
  clk: Don't try to enable critical clocks if prepare failed
  clk: tegra: Fix double-free in tegra_clk_init()
  clk: samsung: exynos5420: Keep top G3D clocks enabled
  clk: qcom: Avoid SMMU/cx gdsc corner cases
  clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs
  clk: Move clk_core_reparent_orphans() under CONFIG_OF
  clk: at91: fix possible deadlock
  clk: walk orphan list on clock provider registration
  clk: imx: pll14xx: fix clk_pll14xx_wait_lock
  clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table
  clk: imx: clk-composite-8m: add lock to gate/mux

* clk-ux500:
  clk: ux500: Fix up the SGA clock for some variants

* clk-kconfig:
  clk: Fix Kconfig indentation

* clk-at91:
  clk: at91: sam9x60: fix programmable clock prescaler
  clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value

 - Let clk_ops::init() return an error code
 - Add a clk_ops::terminate() callback to undo clk_ops::init()

* clk-init-allocation:
  clk: add terminate callback to clk_ops
  clk: let init callback return an error code
  clk: actually call the clock init before any other callback of the clock

* clk-unused:
  clk: bm1800: Remove set but not used variable 'fref'

* clk-register-dt-node-better:
  clk: Use parent node pointer during registration if necessary

The prescaler works as parent rate divided by (PRES + 1) (is_pres_direct == 1)
It does not work in the way of parent rate shifted to the right by (PRES + 1),
which means division by 2^(PRES + 1) (is_pres_direct == 0)
Thus is_pres_direct must be enabled for this SoC, to make the right computation.
This field was added in
commit 45b06682 ("clk: at91: fix programmable clock for sama5d2")
SAM9X60 has the same field as SAMA5D2 in the PCK

Fixes: 01e2113d ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1575977088-16781-1-git-send-email-eugen.hristev@microchip.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

Product datasheet recommends different values for UPLL and PLLA analog control
register.
Adapt accordingly.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1573478913-19737-1-git-send-email-eugen.hristev@microchip.comAcked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Link: https://lkml.kernel.org/r/1574306335-29026-1-git-send-email-krzk@kernel.org
[sboyd@kernel.org: Fixup mediatek to have two spaces for help indent]
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

Some of the special PRCMU firmware variants were not
properly detected in the Ux500 clock driver, resulting
in the wrong clock for the SGA.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://lkml.kernel.org/r/20191217210504.27888-1-linus.walleij@linaro.orgAcked-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

If we don't warn here users of the CLK_IS_CRITICAL flag may not know
that their clk isn't actually enabled because it silently fails to
enable. Let's print a warning in that case so developers find these
problems faster.
Suggested-by: NJerome Brunet <jbrunet@baylibre.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200102005503.71923-1-sboyd@kernel.orgReviewed-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>

SCSSI has clock gates for each channel in the SoCs newer than Pro4,
so this adds missing clock gates for channel 1, 2 and 3. And more, this
moves MCSSI clock ID after SCSSI.

Fixes: ff388ee3 ("clk: uniphier: add clock frequency support for SPI")
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/1577410925-22021-1-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

Sometimes clk drivers are attached to devices which are children of a
parent device that is connected to a node in DT. This happens when
devices are MFD-ish and the parent device driver mostly registers child
devices to match against drivers placed in their respective subsystem
directories like drivers/clk, drivers/regulator, etc. When the clk
driver calls clk_register() with a device pointer, that struct device
pointer won't have a device_node associated with it because it was
created purely in software as a way to partition logic to a subsystem.

This causes problems for the way we find parent clks for the clks
registered by these child devices because we look at the registering
device's device_node pointer to lookup 'clocks' and 'clock-names'
properties. Let's use the parent device's device_node pointer if the
registering device doesn't have a device_node but the parent does. This
simplifies clk registration code by avoiding the need to assign some
device_node to the device registering the clk.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org
[sboyd@kernel.org: Fixup kernel-doc notation]
Reviewed-by: NNiklas Cassel <nks@flawful.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The following traceback is seen if a critical clock fails to prepare.

bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL
------------[ cut here ]------------
Enabling unprepared plld_per
WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:1014 clk_core_enable+0xcc/0x2c0
...
Call trace:
 clk_core_enable+0xcc/0x2c0
 __clk_register+0x5c4/0x788
 devm_clk_hw_register+0x4c/0xb0
 bcm2835_register_pll_divider+0xc0/0x150
 bcm2835_clk_probe+0x134/0x1e8
 platform_drv_probe+0x50/0xa0
 really_probe+0xd4/0x308
 driver_probe_device+0x54/0xe8
 device_driver_attach+0x6c/0x78
 __driver_attach+0x54/0xd8
...

Check return values from clk_core_prepare() and clk_core_enable() and
bail out if any of those functions returns an error.

Cc: Jerome Brunet <jbrunet@baylibre.com>
Fixes: 99652a46 ("clk: migrate the count of orphaned clocks at init")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20191225163429.29694-1-linux@roeck-us.netSigned-off-by: NStephen Boyd <sboyd@kernel.org>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/clk/clk-bm1880.c: In function 'bm1880_pll_rate_calc':
drivers/clk/clk-bm1880.c:477:13: warning:
 variable 'fref' set but not used [-Wunused-but-set-variable]

It is never used, so remove it.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Link: https://lkml.kernel.org/r/20191129033534.188257-1-yuehaibing@huawei.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

It's unlikely to happen in practice ever, but makes static checkers happy.

Fixes: 535f296d ("clk: tegra: Add suspend and resume support on Tegra210")
Reported-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Link: https://lkml.kernel.org/r/20191210020512.6088-1-digetx@gmail.comAcked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

In Exynos542x/5800 SoCs, the G3D leaf clocks are located in the G3D power
domain. This is similar to the other hardware modules and their power
domains. However there is one thing specific to G3D clocks hierarchy.
Unlike other hardware modules, the G3D clocks hierarchy doesn't have any
gate clock between the TOP part of the hierarchy and the part located in
the power domain and some SoC internal busses are sourced directly from
the TOP muxes. The consequence of this design if the fact that the TOP
part of the hierarchy has to be enabled permanently to ensure proper
operation of the SoC power related components (G3D power domain and
Exynos Power Management Unit for system suspend/resume).

This patch adds an explicit call to clk_prepare_enable() on the last MUX
in the TOP part of G3D clock hierarchy to keep it enabled permanently to
ensure that the internal busses get their clock regardless of the main
G3D clock enablement status.

This fixes following imprecise abort issue observed on Odroid XU3/XU4
after enabling Panfrost driver by commit 1a5a85c5 "ARM: dts: exynos:
Add Mali/GPU node on Exynos5420 and enable it on Odroid XU3/4"):

panfrost 11800000.gpu: clock rate = 400000000
panfrost 11800000.gpu: failed to get regulator: -517
panfrost 11800000.gpu: regulator init failed -517
Power domain G3D disable failed
...
panfrost 11800000.gpu: clock rate = 400000000
8<--- cut here ---
Unhandled fault: imprecise external abort (0x1406) at 0x00000000
pgd = (ptrval)
[00000000] *pgd=00000000
Internal error: : 1406 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 7 PID: 53 Comm: kworker/7:1 Not tainted 5.4.0-rc8-next-20191119-00032-g56f1001191a6 #6923
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
PC is at panfrost_gpu_soft_reset+0x94/0x110
LR is at ___might_sleep+0x128/0x2dc
...
[<c05c231c>] (panfrost_gpu_soft_reset) from [<c05c2704>] (panfrost_gpu_init+0x10/0x67c)
[<c05c2704>] (panfrost_gpu_init) from [<c05c15d0>] (panfrost_device_init+0x158/0x2cc)
[<c05c15d0>] (panfrost_device_init) from [<c05c0cb0>] (panfrost_probe+0x80/0x178)
[<c05c0cb0>] (panfrost_probe) from [<c05cfaa0>] (platform_drv_probe+0x48/0x9c)
[<c05cfaa0>] (platform_drv_probe) from [<c05cd20c>] (really_probe+0x1c4/0x474)
[<c05cd20c>] (really_probe) from [<c05cd694>] (driver_probe_device+0x78/0x1bc)
[<c05cd694>] (driver_probe_device) from [<c05cb374>] (bus_for_each_drv+0x74/0xb8)
[<c05cb374>] (bus_for_each_drv) from [<c05ccfa8>] (__device_attach+0xd4/0x16c)
[<c05ccfa8>] (__device_attach) from [<c05cc110>] (bus_probe_device+0x88/0x90)
[<c05cc110>] (bus_probe_device) from [<c05cc634>] (deferred_probe_work_func+0x4c/0xd0)
[<c05cc634>] (deferred_probe_work_func) from [<c0149df0>] (process_one_work+0x300/0x864)
[<c0149df0>] (process_one_work) from [<c014a3ac>] (worker_thread+0x58/0x5a0)
[<c014a3ac>] (worker_thread) from [<c0151174>] (kthread+0x12c/0x160)
[<c0151174>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xee03dfb0 to 0xee03dff8)
...
Code: e594300c e5933020 e3130c01 1a00000f (ebefff50).
---[ end trace badde2b74a65a540 ]---

In the above case, the Panfrost driver disables G3D clocks after failure
of getting the needed regulator and return with -EPROVE_DEFER code. This
causes G3D power domain disable failure and then, during second probe
an imprecise abort is triggered due to undefined power domain state.

Fixes: 45f10dab ("clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path")
Fixes: c9f7567a ("clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU")
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lkml.kernel.org/r/20191216131407.17225-1-m.szyprowski@samsung.comAcked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

Add a terminate callback to the clk_ops to release the resources
claimed in .init()
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-4-jbrunet@baylibre.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

If the init callback is allowed to request resources, it needs a return
value to report the outcome of such a request.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-3-jbrunet@baylibre.comReviewed-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

 __clk_init_parent() will call the .get_parent() callback of the clock
 so .init() must run before.

Fixes: 541debae ("clk: call the clock init() callback before any other ops callback")
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-2-jbrunet@baylibre.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid
corner cases with SMMU per hardware documentation.

Fixes: 3f7df5ba ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver")
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

Commit 17269568 ("clk: qcom: Add Global Clock controller (GCC)
driver for SC7180") sets the VOTABLE flag in .pwrsts, but it needs
to be set in .flags, fix this.

Fixes: 17269568 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Link: https://lkml.kernel.org/r/20191204120341.1.I9971817e83ee890d1096c43c5a6ce6ced53d5bd3@changeidSigned-off-by: NStephen Boyd <sboyd@kernel.org>

A recent addition exposed a helper that is only used for CONFIG_OF. Move
it into the CONFIG_OF zone in this file to make the compiler stop
warning about an unused function.

Fixes: 66d95064 ("clk: walk orphan list on clock provider registration")
Signed-off-by: NOlof Johansson <olof@lixom.net>
Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org
[sboyd@kernel.org: "Simply" move the function instead]
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.
Reported-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.comTested-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>

Merge tag 'imx-clk-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-fixes

Pull i.MX clk fixes from Shawn Guo:

 - Add missing lock to divider in the composite driver for exclusive
   register access
 - Add missing sentinel for ulp_div_table in clk-imx7ulp driver
 - Fix clk_pll14xx_wait_lock() function which calls into
   readl_poll_timeout() with incorrect parameter

* tag 'imx-clk-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: pll14xx: fix clk_pll14xx_wait_lock
  clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table
  clk: imx: clk-composite-8m: add lock to gate/mux

So far, we walked the orphan list every time a new clock was registered
in CCF. This was fine since the clocks were only referenced by name.

Now that the clock can be referenced through DT, it is not enough:
* Controller A register first a reference clocks from controller B
  through DT.
* Controller B register all its clocks then register the provider.

Each time controller B registers a new clock, the orphan list is walked
but it can't match since the provider is registered yet. When the
provider is finally registered, the orphan list is not walked unless
another clock is registered afterward.

This can lead to situation where some clocks remain orphaned even if
the parent is available.

Walking the orphan list on provider registration solves the problem.
Reported-by: NJian Hu <jian.hu@amlogic.com>
Fixes: fc0c209c ("clk: Allow parents to be specified without string names")
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

The usage of readl_poll_timeout is wrong, the 3rd parameter(cond)
should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US",
It is not check whether the pll locked, LOCK_STATUS reflects the mask,
not LOCK_TIMEOUT_US.

Fixes: 8646d4dc ("clk: imx: Add PLLs driver for imx8mm soc")
Cc: <stable@vger.kernel.org>
Reviewed-by: NAbel Vesa <abel.vesa@nxp.com>
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

There should be a sentinel of ulp_div_table, otherwise _get_table_div
may access data out of the array.

Fixes: b1260067 ("clk: imx: add imx7ulp clk driver")
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

There is a lock to divider in the composite driver, but that's not
enough. lock to gate/mux are also needed to provide exclusive access
to the register.

Fixes: d3ff9728 ("clk: imx: Add imx composite clock")
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Pull networking fixes from David Miller:

 1) More jumbo frame fixes in r8169, from Heiner Kallweit.

 2) Fix bpf build in minimal configuration, from Alexei Starovoitov.

 3) Use after free in slcan driver, from Jouni Hogander.

 4) Flower classifier port ranges don't work properly in the HW offload
    case, from Yoshiki Komachi.

 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.

 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.

 7) Fix flow dissection in dsa TX path, from Alexander Lobakin.

 8) Stale syncookie timestampe fixes from Guillaume Nault.

[ Did an evil merge to silence a warning introduced by this pull - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  r8169: fix rtl_hw_jumbo_disable for RTL8168evl
  net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
  r8169: add missing RX enabling for WoL on RTL8125
  vhost/vsock: accept only packets with the right dst_cid
  net: phy: dp83867: fix hfs boot in rgmii mode
  net: ethernet: ti: cpsw: fix extra rx interrupt
  inet: protect against too small mtu values.
  gre: refetch erspan header from skb->data after pskb_may_pull()
  pppoe: remove redundant BUG_ON() check in pppoe_pernet
  tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
  tcp: tighten acceptance of ACKs not matching a child socket
  tcp: fix rejected syncookies due to stale timestamps
  lpc_eth: kernel BUG on remove
  tcp: md5: fix potential overestimation of TCP option space
  net: sched: allow indirect blocks to bind to clsact in TC
  net: core: rename indirect block ingress cb function
  net-sysfs: Call dev_hold always in netdev_queue_add_kobject
  net: dsa: fix flow dissection on Tx path
  net/tls: Fix return values to avoid ENOTSUPP
  net: avoid an indirect call in ____sys_recvmsg()
  ...

Pull more SCSI updates from James Bottomley:
 "Eleven patches, all in drivers (no core changes) that are either minor
  cleanups or small fixes.

  They were late arriving, but still safe for -rc1"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
  scsi: megaraid_sas: Make poll_aen_lock static
  scsi: sd_zbc: Improve report zones error printout
  scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  scsi: qla2xxx: unregister ports after GPN_FT failure
  scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  scsi: pm80xx: Remove unused include of linux/version.h
  scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
  scsi: scsi_transport_sas: Fix memory leak when removing devices
  scsi: lpfc: size cpu map by last cpu id set
  scsi: ibmvscsi_tgt: Remove unneeded variable rc

Pull cifs fixes from Steve French:
 "Nine cifs/smb3 fixes:

   - one fix for stable (oops during oplock break)

   - two timestamp fixes including important one for updating mtime at
     close to avoid stale metadata caching issue on dirty files (also
     improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
     wire)

   - two fixes for "modefromsid" mount option for file create (now
     allows mode bits to be set more atomically and accurately on create
     by adding "sd_context" on create when modefromsid specified on
     mount)

   - two fixes for multichannel found in testing this week against
     different servers

   - two small cleanup patches"

* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: improve check for when we send the security descriptor context on create
  smb3: fix mode passed in on create for modetosid mount option
  cifs: fix possible uninitialized access and race on iface_list
  cifs: Fix lookup of SMB connections on multichannel
  smb3: query attributes on file close
  smb3: remove unused flag passed into close functions
  cifs: remove redundant assignment to pointer pneg_ctxt
  fs: cifs: Fix atime update check vs mtime
  CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks

Pull misc vfs cleanups from Al Viro:
 "No common topic, just three cleanups".

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make __d_alloc() static
  fs/namespace: add __user to open_tree and move_mount syscalls
  fs/fnctl: fix missing __user in fcntl_rw_hint()

Pull NTB update from Jon Mason:
 "Just a simple patch to add a new Hygon Device ID to the AMD NTB device
  driver"

* tag 'ntb-5.5' of git://github.com/jonmason/ntb:
  NTB: Add Hygon Device ID

Pull more input updates from Dmitry Torokhov:

 - fixups for Synaptics RMI4 driver

 - a quirk for Goodinx touchscreen on Teclast tablet

 - a new keycode definition for activating privacy screen feature found
   on a few "enterprise" laptops

 - updates to snvs_pwrkey driver

 - polling uinput device for writing (which is always allowed) now works

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
  Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
  Input: goodix - add upside-down quirk for Teclast X89 tablet
  Input: add privacy screen toggle keycode
  Input: uinput - fix returning EPOLLOUT from uinput_poll
  Input: snvs_pwrkey - remove gratuitous NULL initializers
  Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q

Pull iomap fixes from Darrick Wong:
 "Fix a race condition and a use-after-free error:

   - Fix a UAF when reporting writeback errors

   - Fix a race condition when handling page uptodate on fragmented file
     with blocksize < pagesize"

* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: stop using ioend after it's been freed in iomap_finish_ioend()
  iomap: fix sub-page uptodate handling

Pull xfs fixes from Darrick Wong:
 "Fix a couple of resource management errors and a hang:

   - fix a crash in the log setup code when log mounting fails

   - fix a hang when allocating space on the realtime device

   - fix a block leak when freeing space on the realtime device"

* tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix mount failure crash on invalid iclog memory access
  xfs: don't check for AG deadlock for realtime files in bunmapi
  xfs: fix realtime file data space leak

Pull orangefs update from Mike Marshall:
 "orangefs: posix open permission checking...

  Orangefs has no open, and orangefs checks file permissions on each
  file access. Posix requires that file permissions be checked on open
  and nowhere else. Orangefs-through-the-kernel needs to seem posix
  compliant.

  The VFS opens files, even if the filesystem provides no method. We can
  see if a file was successfully opened for read and or for write by
  looking at file->f_mode.

  When writes are flowing from the page cache, file is no longer
  available. We can trust the VFS to have checked file->f_mode before
  writing to the page cache.

  The mode of a file might change between when it is opened and IO
  commences, or it might be created with an arbitrary mode.

  We'll make sure we don't hit EACCES during the IO stage by using
  UID 0"

[ This is "posixish", but not a great solution in the long run, since a
  proper secure network server shouldn't really trust the client like this.
  But proper and secure POSIX behavior requires an open method and a
  resulting cookie for IO of some kind, or similar.    - Linus ]

* tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: posix open permission checking...

Pull nfsd updates from Bruce Fields:
 "This is a relatively quiet cycle for nfsd, mainly various bugfixes.

  Possibly most interesting is Trond's fixes for some callback races
  that were due to my incomplete understanding of rpc client shutdown.
  Unfortunately at the last minute I've started noticing a new
  intermittent failure to send callbacks. As the logic seems basically
  correct, I'm leaving Trond's patches in for now, and hope to find a
  fix in the next week so I don't have to revert those patches"

* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
  nfsd: depend on CRYPTO_MD5 for legacy client tracking
  NFSD fixing possible null pointer derefering in copy offload
  nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
  nfsd: Ensure CLONE persists data and metadata changes to the target file
  SUNRPC: Fix backchannel latency metrics
  nfsd: restore NFSv3 ACL support
  nfsd: v4 support requires CRYPTO_SHA256
  nfsd: Fix cld_net->cn_tfm initialization
  lockd: remove __KERNEL__ ifdefs
  sunrpc: remove __KERNEL__ ifdefs
  race in exportfs_decode_fh()
  nfsd: Drop LIST_HEAD where the variable it declares is never used.
  nfsd: document callback_wq serialization of callback code
  nfsd: mark cb path down on unknown errors
  nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
  nfsd: minor 4.1 callback cleanup
  SUNRPC: Fix svcauth_gss_proxy_init()
  SUNRPC: Trace gssproxy upcall results
  sunrpc: fix crash when cache_head become valid before update
  nfsd: remove private bin2hex implementation
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:

   - NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
     copy of a file from one source server to a different target
     server).

   - New RDMA tracepoints for debugging congestion control and Local
     Invalidate WRs.

  Bugfixes and cleanups

   - Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
     layoutreturn

   - Handle bad/dead sessions correctly in nfs41_sequence_process()

   - Various bugfixes to the delegation return operation.

   - Various bugfixes pertaining to delegations that have been revoked.

   - Cleanups to the NFS timespec code to avoid unnecessary conversions
     between timespec and timespec64.

   - Fix unstable RDMA connections after a reconnect

   - Close race between waking an RDMA sender and posting a receive

   - Wake pending RDMA tasks if connection fails

   - Fix MR list corruption, and clean up MR usage

   - Fix another RPCSEC_GSS issue with MIC buffer space"

* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  SUNRPC: Capture completion of all RPC tasks
  SUNRPC: Fix another issue with MIC buffer space
  NFS4: Trace lock reclaims
  NFS4: Trace state recovery operation
  NFSv4.2 fix memory leak in nfs42_ssc_open
  NFSv4.2 fix kfree in __nfs42_copy_file_range
  NFS: remove duplicated include from nfs4file.c
  NFSv4: Make _nfs42_proc_copy_notify() static
  NFS: Fallocate should use the nfs4_fattr_bitmap
  NFS: Return -ETXTBSY when attempting to write to a swapfile
  fs: nfs: sysfs: Remove NULL check before kfree
  NFS: remove unneeded semicolon
  NFSv4: add declaration of current_stateid
  NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
  NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
  nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
  SUNRPC: Avoid RPC delays when exiting suspend
  NFS: Add a tracepoint in nfs_fh_to_dentry()
  NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
  NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
  ...

We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.

Add check for that mount flag before calling ad_sd_context in
open init.
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>

Pull VFIO updates from Alex Williamson:

 - Remove hugepage checks for reserved pfns (Ben Luo)

 - Fix irq-bypass unregister ordering (Jiang Yi)

* tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/pci: call irq_bypass_unregister_producer() before freeing irq
  vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()

Pull more xen updates from Juergen Gross:

 - a patch to fix a build warning

 - a cleanup of no longer needed code in the Xen event handling

 - a small series for the Xen grant driver avoiding high order
   allocations and replacing an insane global limit by a per-call one

 - a small series fixing Xen frontend/backend module referencing

* tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-blkback: allow module to be cleanly unloaded
  xen/xenbus: reference count registered modules
  xen/gntdev: switch from kcalloc() to kvcalloc()
  xen/gntdev: replace global limit of mapped pages by limit per call
  xen/gntdev: remove redundant non-zero check on ret
  xen/events: remove event handling recursion detection