Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 30 5月, 2018 1 次提交
    • K
      perf parse-events: Handle uncore event aliases in small groups properly · 369b2308
      由 Kan Liang 提交于 
      Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:

  perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
  #           time             counts unit events
       1.000447342      <not counted>      unc_m_cas_count.all
       1.000447342      <not counted>      unc_m_clockticks
       2.000740654      <not counted>      unc_m_cas_count.all
       2.000740654      <not counted>      unc_m_clockticks

The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.

An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.

The right way is to split the big group into multiple small groups which
only include the events from the same PMU.

Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.

With the patch:
  #           time             counts unit events
     1.001557653            140,833      unc_m_cas_count.all
     1.001557653      1,330,231,332      unc_m_clockticks
     2.002709483             85,007      unc_m_cas_count.all
     2.002709483      1,429,494,563      unc_m_clockticks
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      369b2308
  3. 11 5月, 2018 4 次提交
    • A
      perf tools: Add missing newline when parsing empty BPF proggie · c23080a6
      由 Arnaldo Carvalho de Melo 提交于 
      This is not specific to BPF but was found when parsing a .c BPF proggie
that while valid, had no events attached to tracepoints, kprobes, etc:

Very minimal file that perf's BPF code can compile:

  # cat empty.c
  char _license[] __attribute__((section("license"), used)) = "GPL";
  int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE;
  #

Before this patch:

  # perf trace -e empty.c
  WARNING: event parser found nothinginvalid or unsupported event: 'empty.c'
  Run 'perf list' for a list of valid events

   Usage: perf trace [<options>] [<command>]
      or: perf trace [<options>] -- <command> [<options>]
      or: perf trace record [<options>] [<command>]
      or: perf trace record [<options>] -- <command> [<options>]

      -e, --event <event>   event/syscall selector. use 'perf list' to list available events
    #

After:

  # perf trace -e empty.c
  WARNING: event parser found nothing
  invalid or unsupported event: 'empty.c'
  Run 'perf list' for a list of valid events

   Usage: perf trace [<options>] [<command>]
      or: perf trace [<options>] -- <command> [<options>]
      or: perf trace record [<options>] [<command>]
      or: perf trace record [<options>] -- <command> [<options>]

      -e, --event <event>   event/syscall selector. use 'perf list' to list available events
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8ysughiz00h6mjpcot04qyjj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c23080a6
    • L
      perf cs-etm: Remove redundant space · 3a088799
      由 Leo Yan 提交于 
      There have two spaces ahead function name cs_etm__set_pid_tid_cpu(), so
remove one space and correct indentation.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1525924920-4381-2-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3a088799
    • L
      perf cs-etm: Support unknown_thread in cs_etm_auxtrace · 46d53620
      由 Leo Yan 提交于 
      CoreSight doesn't allocate thread structure for unknown_thread in ETM
auxtrace, so unknown_thread is NULL pointer.  If the perf data doesn't
contain valid tid and then cs_etm__mem_access() uses unknown_thread
instead as thread handler, this results in a segmentation fault when
thread__find_addr_map() accesses the thread handler.

This commit creates a new thread data which is used by unknown_thread, so
CoreSight tracing can roll back to use unknown_thread if perf data
doesn't include valid thread info.  This commit also releases thread
data for initialization failure case and for normal auxtrace free flow.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1525924920-4381-1-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      46d53620
    • J
      perf annotate: Display all available events on --stdio · 04d2600a
      由 Jin Yao 提交于 
      When we perform the following command lines:

  $ perf record -e "{cycles,branches}" ./div
  $ perf annotate main --stdio

The output shows only the first event, "cycles" and the displaying
format is not correct.

   Percent         |      Source code & Disassembly of div for cycles (44550 samples)
  -----------------------------------------------------------------------------------
                   :
                   :
                   :
                   :            Disassembly of section .text:
                   :
                   :            00000000004004b0 <main>:
                   :            main():
                   :
                   :                    return i;
                   :            }
                   :
                   :            int main(void)
                   :            {
      0.00 :   4004b0:       push   %rbx
                   :                    int i;
                   :                    int flag;
                   :                    volatile double x = 1212121212, y = 121212;
                   :
                   :                    s_randseed = time(0);
      0.00 :   4004b1:       xor    %edi,%edi
                   :                    srand(s_randseed);
      0.00 :   4004b3:       mov    $0x77359400,%ebx
                   :
                   :                    return i;
                   :            }

The issue is that the value of the 'nr_percent' variable is hardcoded to
1.  This patch fixes it.

With this patch, the output is:

   Percent         |      Source code & Disassembly of div for cycles (44550 samples)
  -----------------------------------------------------------------------------------
                   :
                   :
                   :
                   :            Disassembly of section .text:
                   :
                   :            00000000004004b0 <main>:
                   :            main():
                   :
                   :                    return i;
                   :            }
                   :
                   :            int main(void)
                   :            {
      0.00    0.00 :   4004b0:       push   %rbx
                   :                    int i;
                   :                    int flag;
                   :                    volatile double x = 1212121212, y = 121212;
                   :
                   :                    s_randseed = time(0);
      0.00    0.00 :   4004b1:       xor    %edi,%edi
                   :                    srand(s_randseed);
      0.00    0.00 :   4004b3:       mov    $0x77359400,%ebx
                   :
                   :                    return i;
                   :            }
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f681d593 ("perf annotate: Remove disasm__calc_percent() from disasm_line__print()")
Link: http://lkml.kernel.org/r/1525881435-4092-1-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      04d2600a
  5. 08 5月, 2018 1 次提交
  7. 25 4月, 2018 3 次提交
    • K
      perf stat: Fix duplicate PMU name for interval print · 80ee8c58
      由 Kan Liang 提交于 
      PMU name is printed repeatedly for interval print, for example:

  perf stat --no-merge -e 'unc_m_clockticks' -a -I 1000
  #           time             counts unit events
     1.001053069        243,702,144      unc_m_clockticks [uncore_imc_4]
     1.001053069        244,268,304      unc_m_clockticks [uncore_imc_2]
     1.001053069        244,427,386      unc_m_clockticks [uncore_imc_0]
     1.001053069        244,583,760      unc_m_clockticks [uncore_imc_5]
     1.001053069        244,738,971      unc_m_clockticks [uncore_imc_3]
     1.001053069        244,880,309      unc_m_clockticks [uncore_imc_1]
     2.002024821        240,818,200      unc_m_clockticks [uncore_imc_4] [uncore_imc_4]
     2.002024821        240,767,812      unc_m_clockticks [uncore_imc_2] [uncore_imc_2]
     2.002024821        240,764,215      unc_m_clockticks [uncore_imc_0] [uncore_imc_0]
     2.002024821        240,759,504      unc_m_clockticks [uncore_imc_5] [uncore_imc_5]
     2.002024821        240,755,992      unc_m_clockticks [uncore_imc_3] [uncore_imc_3]
     2.002024821        240,750,403      unc_m_clockticks [uncore_imc_1] [uncore_imc_1]

For each print, the PMU name is unconditionally appended to the
counter->name.

Need to check the counter->name first. If the PMU name is already
appended, do nothing.

Committer notes:

Add and use perf_evsel->uniquified_name bool instead of doing the more
expensive strstr(event->name, pmu->name).
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 8c5421c0 ("perf pmu: Display pmu name when printing unmerged events in stat")
Link: http://lkml.kernel.org/r/1524594014-79243-5-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      80ee8c58
    • K
      perf evsel: Only fall back group read for leader · 121f325f
      由 Kan Liang 提交于 
      Perf doesn't support mixed events from different PMUs (except software
event) in a group. The perf stat should output <not counted>/<not
supported> for all events, but it doesn't. For example,

  perf stat -e '{cycles,uncore_imc_5/umask=0xF,event=0x4/,instructions}'
       <not counted>      cycles
       <not supported>    uncore_imc_5/umask=0xF,event=0x4/
           1,024,300      instructions

If perf fails to open an event, it doesn't error out directly. It will
disable some features and retry, until the event is opened or all
features are disabled. The disabled features will not be re-enabled. The
group read is one of these features.

For the example as above, the IMC event and the leader event "cycles"
are from different PMUs. Opening the IMC event must fail. The group read
feature must be disabled for IMC event and the followed event
"instructions". The "instructions" event has the same PMU as the leader
"cycles". It can be opened successfully. Since the group read feature
has been disabled, the "instructions" event will be read as a single
event, which definitely has a value.

The group read fallback is still useful for the case which kernel
doesn't support group read. It is good enough to be handled only by the
leader.

For the fallback request from members, it must be caused by an error.
The fallback only breaks the semantics of group.  Limit the group read
fallback only for the leader.

Committer testing:

On a broadwell t450s notebook:

Before:

  # perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1

  Performance counter stats for 'sleep 1':

     <not counted>      cycles
   <not supported>      unc_cbo_cache_lookup.read_i
           818,206      instructions

       1.003170887 seconds time elapsed

  Some events weren't counted. Try disabling the NMI watchdog:
	echo 0 > /proc/sys/kernel/nmi_watchdog
	perf stat ...
	echo 1 > /proc/sys/kernel/nmi_watchdog

After:

  # perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1

  Performance counter stats for 'sleep 1':

     <not counted>      cycles
   <not supported>      unc_cbo_cache_lookup.read_i
     <not counted>      instructions

       1.001380511 seconds time elapsed

  Some events weren't counted. Try disabling the NMI watchdog:
	echo 0 > /proc/sys/kernel/nmi_watchdog
	perf stat ...
	echo 1 > /proc/sys/kernel/nmi_watchdog
  #
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes:  82bf311e ("perf stat: Use group read for event groups")
Link: http://lkml.kernel.org/r/1524594014-79243-3-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      121f325f
    • K
      perf pmu: Fix core PMU alias list for X86 platform · 292c34c1
      由 Kan Liang 提交于 
      When counting uncore event with alias, core event is mistakenly
involved, for example:

  perf stat --no-merge -e "unc_m_cas_count.all" -C0  sleep 1

  Performance counter stats for 'CPU(s) 0':

                 0      unc_m_cas_count.all [uncore_imc_4]
                 0      unc_m_cas_count.all [uncore_imc_2]
                 0      unc_m_cas_count.all [uncore_imc_0]
           153,640      unc_m_cas_count.all [cpu]
                 0      unc_m_cas_count.all [uncore_imc_5]
            25,026      unc_m_cas_count.all [uncore_imc_3]
                 0      unc_m_cas_count.all [uncore_imc_1]

       1.001447890 seconds time elapsed

The reason is that current implementation doesn't check PMU name of a
event when adding its alias into the alias list for core PMU. The
uncore event aliases are mistakenly added.

This bug was introduced in:
  commit 14b22ae0 ("perf pmu: Add helper function is_pmu_core to
  detect PMU CORE devices")

Checking the PMU name for all PMUs on X86 and other architectures except
ARM.
There is no behavior change for ARM.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 14b22ae0 ("perf pmu: Add helper function is_pmu_core to detect PMU CORE devices")
Link: http://lkml.kernel.org/r/1524594014-79243-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      292c34c1
  9. 23 4月, 2018 5 次提交
  11. 19 4月, 2018 3 次提交
  13. 17 4月, 2018 2 次提交
    • T
      perf list: Add s390 support for detailed/verbose PMU event description · 038586c3
      由 Thomas Richter 提交于 
      'perf list' with flags -d and -v print a description (-d) or a very
verbose explanation (-v) of CPU specific counter events.  These
descriptions are provided with the json files in directory
pmu-events/arch/s390/*.json.

Display of these descriptions on s390 requires the corresponding json
files.

On s390 this does not work because function is_pmu_core() does not
detect the s390 directory name where the CPU specific events are listed.
On x86 it is:

  /sys/bus/event_source/devices/cpu

whereas on s390 it is:

  /sys/bus/event_source/devices/cpum_cf
  /sys/bus/event_source/devices/cpum_sf

Fix this by adding s390 directory name testing to function
is_pmu_core(). This is the same approach as taken for the ARM platform.

Output before:

[root@s35lp76 perf]# ./perf list -d pmu
List of pre-defined events (to be used in -e):

  cpum_cf/AES_BLOCKED_CYCLES/      [Kernel PMU event]
  cpum_cf/AES_BLOCKED_FUNCTIONS/   [Kernel PMU event]
  cpum_cf/AES_CYCLES/              [Kernel PMU event]
  cpum_cf/AES_FUNCTIONS/           [Kernel PMU event]
  ....
  cpum_cf/TX_NC_TEND/              [Kernel PMU event]
  cpum_cf/VX_BCD_EXECUTION_SLOTS/  [Kernel PMU event]
  cpum_sf/SF_CYCLES_BASIC/         [Kernel PMU event]

Output after:

[root@s35lp76 perf]# ./perf list -d pmu
List of pre-defined events (to be used in -e):

  cpum_cf/AES_BLOCKED_CYCLES/      [Kernel PMU event]
  cpum_cf/AES_BLOCKED_FUNCTIONS/   [Kernel PMU event]
  cpum_cf/AES_CYCLES/              [Kernel PMU event]
  cpum_cf/AES_FUNCTIONS/           [Kernel PMU event]
  ....
  cpum_cf/TX_NC_TEND/              [Kernel PMU event]
  cpum_cf/VX_BCD_EXECUTION_SLOTS/  [Kernel PMU event]
  cpum_sf/SF_CYCLES_BASIC/         [Kernel PMU event]

3906:
  bcd_dfp_execution_slots
       [BCD DFP Execution Slots]
  decimal_instructions
       [Decimal Instructions]
  dtlb2_gpage_writes
       [DTLB2 GPAGE Writes]
  dtlb2_hpage_writes
       [DTLB2 HPAGE Writes]
  dtlb2_misses
       [DTLB2 Misses]
  dtlb2_writes
       [DTLB2 Writes]
  itlb2_misses
       [ITLB2 Misses]
  itlb2_writes
       [ITLB2 Writes]
  l1c_tlb2_misses
       [L1C TLB2 Misses]
  .....

cfvn 3:
  cpu_cycles
       [CPU Cycles]
  instructions
       [Instructions]
  l1d_dir_writes
       [L1D Directory Writes]
  l1d_penalty_cycles
       [L1D Penalty Cycles]
  l1i_dir_writes
       [L1I Directory Writes]
  l1i_penalty_cycles
       [L1I Penalty Cycles]
  problem_state_cpu_cycles
       [Problem State CPU Cycles]
  problem_state_instructions
       [Problem State Instructions]
  ....

csvn generic:
  aes_blocked_cycles
       [AES Blocked Cycles]
  aes_blocked_functions
       [AES Blocked Functions]
  aes_cycles
       [AES Cycles]
  aes_functions
       [AES Functions]
  dea_blocked_cycles
       [DEA Blocked Cycles]
  dea_blocked_functions
       [DEA Blocked Functions]
  ....
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180416132314.33249-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      038586c3
    • A
      perf report: Extend raw dump (-D) out with switch out event type · b3f35b5d
      由 Alexey Budankov 提交于 
      Print additional 'preempt' tag for PERF_RECORD_SWITCH[_CPU_WIDE] OUT records when
event header misc field contains PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit set
designating preemption context switch out event:

tools/perf/perf report -D -i perf.data | grep _SWITCH

0 768361415226 0x27f076 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:     8/8
4 768362216813 0x28f45e [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:     0/0
4 768362217824 0x28f486 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:  4073/4073
0 768362414027 0x27f0ce [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:     8/8
0 768362414367 0x27f0f6 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:     0/0
Signed-off-by: NAlexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/6f5aebb9-b96c-f304-f08f-8f046d38de4f@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b3f35b5d
  15. 13 4月, 2018 3 次提交
    • A
      perf annotate: Allow setting the offset level in .perfconfig · 43c40231
      由 Arnaldo Carvalho de Melo 提交于 
      The default is 1 (jump_target):

  # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
  Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574
  _raw_spin_lock_irqsave() /proc/kcore
    0.26        nop
    4.61        push   %rbx
   19.33        pushfq
    7.97        pop    %rax
    0.32        nop
    0.06        mov    %rax,%rbx
   14.63        cli
    0.06        nop
                xor    %eax,%eax
                mov    $0x1,%edx
   49.94        lock   cmpxchg %edx,(%rdi)
    0.16        test   %eax,%eax
              ↓ jne    2b
    2.66        mov    %rbx,%rax
                pop    %rbx
              ← retq
          2b:   mov    %eax,%esi
              → callq  *ffffffffb30eaed0
                mov    %rbx,%rax
                pop    %rbx
              ← retq
  #

But one can ask for showing offsets for call instructions by setting
this:

  # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
  Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574
  _raw_spin_lock_irqsave() /proc/kcore
    0.26        nop
    4.61        push   %rbx
   19.33        pushfq
    7.97        pop    %rax
    0.32        nop
    0.06        mov    %rax,%rbx
   14.63        cli
    0.06        nop
                xor    %eax,%eax
                mov    $0x1,%edx
   49.94        lock   cmpxchg %edx,(%rdi)
    0.16        test   %eax,%eax
              ↓ jne    2b
    2.66        mov    %rbx,%rax
                pop    %rbx
              ← retq
          2b:   mov    %eax,%esi
          2d: → callq  *ffffffffb30eaed0
                mov    %rbx,%rax
                pop    %rbx
              ← retq
  #

Or using a big value to ask for all offsets to be shown:

  # cat ~/.perfconfig
  [annotate]

	offset_level = 100

	hide_src_code = true
  # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
  Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574
  _raw_spin_lock_irqsave() /proc/kcore
    0.26   0:   nop
    4.61   5:   push   %rbx
   19.33   6:   pushfq
    7.97   7:   pop    %rax
    0.32   8:   nop
    0.06   d:   mov    %rax,%rbx
   14.63  10:   cli
    0.06  11:   nop
          17:   xor    %eax,%eax
          19:   mov    $0x1,%edx
   49.94  1e:   lock   cmpxchg %edx,(%rdi)
    0.16  22:   test   %eax,%eax
          24: ↓ jne    2b
    2.66  26:   mov    %rbx,%rax
          29:   pop    %rbx
          2a: ← retq
          2b:   mov    %eax,%esi
          2d: → callq  *ffffffffb30eaed0
          32:   mov    %rbx,%rax
          35:   pop    %rbx
          36: ← retq
   #

This also affects the TUI, i.e. the default 'perf annotate' and 'perf
top/report' -> A hotkey -> annotate interfaces, when slang-devel is present
in the build, i.e.:

  # perf version --build-options | grep slang
              libslang: [ on  ]  # HAVE_SLANG_SUPPORT
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-venm6x5zrt40eu8hxdsmqxz6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      43c40231
    • A
      perf report: Fix switching to another perf.data file · 7b366142
      由 Arnaldo Carvalho de Melo 提交于 
      In the TUI the 's' hotkey can be used to switch to another perf.data
file in the current directory, but that got broken in Fixes:
b01141f4 ("perf annotate: Initialize the priv are in symbol__new()"),
that would show this once another file was chosen:

    ┌─Fatal Error─────────────────────────────────────┐
    │Annotation needs to be init before symbol__init()│
    │                                                 │
    │                                                 │
    │Press any key...                                 │
    └─────────────────────────────────────────────────┘

Fix it by just silently bailing out if symbol__annotation_init() was already
called, just like is done with symbol__init(), i.e. they are done just once at
session start, not when switching to a new perf.data file.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: b01141f4 ("perf annotate: Initialize the priv are in symbol__new()")
Link: https://lkml.kernel.org/n/tip-ogppdtpzfax7y1h6gjdv5s6u@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7b366142
    • T
      perf record: Change warning for missing sysfs entry to debug · 4f75f1cb
      由 Thomas Richter 提交于 
      Using perf on 4.16.0 kernel on s390 shows this warning:

   failed: can't open node sysfs data

each time I run command perf record ... for example:

  [root@s35lp76 perf]# ./perf record -e rB0000 -- sleep 1
  [ perf record: Woken up 1 times to write data ]
  failed: can't open node sysfs data
  [ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ]
  [root@s35lp76 perf]#

It turns out commit e2091ced ("perf tools: Add MEM_TOPOLOGY feature
to perf data file") tries to open directory named /sys/devices/system/node/
which does not exist on s390.

This is the call stack:
 __cmd_record
 +---> perf_session__write_header
       +---> perf_header__adds_write
             +---> do_write_feat
	           +---> write_mem_topology
		         +---> build_mem_topology
			       prints warning

The issue starts in do_write_feat() which unconditionally loops over all
features and now includes HEADER_MEM_TOPOLOGY and calls write_mem_topology().

Function record__init_features() at the beginning of __cmd_record() sets
all features and then turns off some of them.

Fix this by changing the warning to a level 2 debug output statement.

So it is only shown when debug level 2 or higher is set.
Signed-off-by: NThomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180412133246.92801-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4f75f1cb
  17. 12 4月, 2018 3 次提交
  19. 09 4月, 2018 3 次提交
    • S
      perf tests clang: Fix function name for clang IR test · fcbd8fa4
      由 Sandipan Das 提交于 
      As stated in tests/llvm-src-base.c, the name of the bpf function should
be "bpf_func__SyS_epoll_pwait" but this clang test fails as it tries to
lookup "bpf_func__SyS_epoll_wait".

Before applying patch:

55: builtin clang support                                 :
55.1: builtin clang compile C source to IR                : FAILED!
55.2: builtin clang compile C source to ELF object        : Skip

After applying patch:

55: builtin clang support                                 :
55.1: builtin clang compile C source to IR                : Ok
55.2: builtin clang compile C source to ELF object        : Ok
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: e67d52d4 ("perf clang: Update test case to use real BPF script")
Link: http://lkml.kernel.org/r/20180404180419.19056-3-sandipan@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fcbd8fa4
    • S
      perf clang: Add support for recent clang versions · 7854e499
      由 Sandipan Das 提交于 
      The clang API calls used by perf have changed in recent releases and
builds succeed with libclang-3.9 only. This introduces compatibility
with libclang-4.0 and above.

Without this patch, we will see the following compilation errors with
libclang-4.0+:

 util/c++/clang.cpp: In function ‘clang::CompilerInvocation* perf::createCompilerInvocation(llvm::opt::ArgStringList, llvm::StringRef&, clang::DiagnosticsEngine&)’:
 util/c++/clang.cpp:62:33: error: ‘IK_C’ was not declared in this scope
   Opts.Inputs.emplace_back(Path, IK_C);
                                  ^~~~
 util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::Module> perf::getModuleFromSource(llvm::opt::ArgStringList, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)’:
 util/c++/clang.cpp:75:26: error: no matching function for call to ‘clang::CompilerInstance::setInvocation(clang::CompilerInvocation*)’
   Clang.setInvocation(&*CI);
                           ^
 In file included from util/c++/clang.cpp:14:0:
 /usr/include/clang/Frontend/CompilerInstance.h:231:8: note: candidate: void clang::CompilerInstance::setInvocation(std::shared_ptr<clang::CompilerInvocation>)
    void setInvocation(std::shared_ptr<CompilerInvocation> Value);
         ^~~~~~~~~~~~~

Committer testing:

Tested on Fedora 27 after installing the clang-devel and llvm-devel
packages, versions:

  # rpm -qa | egrep llvm\|clang
  llvm-5.0.1-6.fc27.x86_64
  clang-libs-5.0.1-5.fc27.x86_64
  clang-5.0.1-5.fc27.x86_64
  clang-tools-extra-5.0.1-5.fc27.x86_64
  llvm-libs-5.0.1-6.fc27.x86_64
  llvm-devel-5.0.1-6.fc27.x86_64
  clang-devel-5.0.1-5.fc27.x86_64
  #

Make sure you don't have some older version lying around in /usr/local,
etc, then:

  $ make LIBCLANGLLVM=1 -C tools/perf install-bin

And in the end perf will be linked agains these libraries:

  # ldd ~/bin/perf | egrep -i llvm\|clang
	libclangAST.so.5 => /lib64/libclangAST.so.5 (0x00007f8bb2eb4000)
	libclangBasic.so.5 => /lib64/libclangBasic.so.5 (0x00007f8bb29e3000)
	libclangCodeGen.so.5 => /lib64/libclangCodeGen.so.5 (0x00007f8bb23f7000)
	libclangDriver.so.5 => /lib64/libclangDriver.so.5 (0x00007f8bb2060000)
	libclangFrontend.so.5 => /lib64/libclangFrontend.so.5 (0x00007f8bb1d06000)
	libclangLex.so.5 => /lib64/libclangLex.so.5 (0x00007f8bb1a3e000)
	libclangTooling.so.5 => /lib64/libclangTooling.so.5 (0x00007f8bb17d4000)
	libclangEdit.so.5 => /lib64/libclangEdit.so.5 (0x00007f8bb15c5000)
	libclangSema.so.5 => /lib64/libclangSema.so.5 (0x00007f8bb0cc9000)
	libclangAnalysis.so.5 => /lib64/libclangAnalysis.so.5 (0x00007f8bb0a23000)
	libclangParse.so.5 => /lib64/libclangParse.so.5 (0x00007f8bb0725000)
	libclangSerialization.so.5 => /lib64/libclangSerialization.so.5 (0x00007f8bb039a000)
	libLLVM-5.0.so => /lib64/libLLVM-5.0.so (0x00007f8bace98000)
	libclangASTMatchers.so.5 => /lib64/../lib64/libclangASTMatchers.so.5 (0x00007f8bab735000)
	libclangFormat.so.5 => /lib64/../lib64/libclangFormat.so.5 (0x00007f8bab4b2000)
	libclangRewrite.so.5 => /lib64/../lib64/libclangRewrite.so.5 (0x00007f8bab2a1000)
	libclangToolingCore.so.5 => /lib64/../lib64/libclangToolingCore.so.5 (0x00007f8bab08e000)
  #
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 00b86691 ("perf clang: Add builtin clang support ant test case")
Link: http://lkml.kernel.org/r/20180404180419.19056-2-sandipan@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7854e499
    • A
      perf tools: No need to include namespaces.h in util.h · ad0902e0
      由 Arnaldo Carvalho de Melo 提交于 
      The only thing that is needed there is a forward declaration for 'struct
nsinfo', so disentanble this, which in turns allows built-in clang
builds, i.e. 'make LIBCLANGLLVM=1 -C tools/perf'.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vq26rsuwq1cqylpcyvq89c84@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ad0902e0
  21. 06 4月, 2018 2 次提交
  23. 05 4月, 2018 2 次提交
  25. 04 4月, 2018 2 次提交
  27. 03 4月, 2018 3 次提交
  29. 02 4月, 2018 1 次提交
    • K
      perf tools: Add a "dso_size" sort order · b74d12d5
      由 Kim Phillips 提交于 
      Add DSO size to perf report/top sort output list.

This includes adding a map__size fn to map.h, which is
approximately equal to the DSO data file_size:

  DSO				file size	map (end-start)	file / (end-start)
  libwebkit2gtk-4.0.so.37.24.9	43260072	41295872	95%
  libglib-2.0.so.0.5400.1		 1125680	 1118208	99%
  libc-2.26.so			 1960656 	 1925120	101%
  libdbus-1.so.3.14.13		  309456 	  303104	102%

Sample output:

  $ ./perf report -s dso_size,dso
  Samples: 2K of event 'cycles:uppp', Event count (approx.): 128373340
  Overhead  DSO size  Shared Object
    90.62%   unknown  [unknown]
     2.87%   1118208  libglib-2.0.so.0.5400.1
     1.92%    303104  libdbus-1.so.3.14.13
     1.42%   1925120  libc-2.26.so
     0.77%  41295872  libwebkit2gtk-4.0.so.37.24.9
     0.61%    335872  libgobject-2.0.so.0.5400.1
     0.41%   1052672  libgdk-3.so.0.2200.25
     0.36%    106496  libpthread-2.26.so
     0.29%    221184  dbus-daemon
     0.17%    159744  ld-2.26.so
     0.13%     49152  libwayland-client.so.0.3.0
     0.12%   1642496  libgio-2.0.so.0.5400.1
     0.09%   73277443  libgtk-3.so.0.2200.25
     0.09%  12324864  libmozjs-52.so.0.0.0
     0.05%   4796416  perf
     0.04%    843776  libgjs.so.0.0.0
     0.03%   1409024  libmutter-clutter-1.so

Committer testing:

To sort by DSO size, use:

  # perf report -F dso_size,dso,overhead -s dso_size
  <SNIP>
     3465216  libdns-export.so.174.0.1   0.00%
     3522560  libgc.so.1.0.3             0.00%
     3538944  libbfd-2.29-13.fc27.so     0.59%
     3670016  libunistring.so.2.1.0      0.00%
     3723264  libguile-2.0.so.22.8.1     0.00%
     3776512  libgio-2.0.so.0.5400.3     0.00%
     3891200  libc-2.26.so               0.96%
     3944448  libmozjs-17.0.so           0.00%
     4218880  libperl.so.5.26.1          0.18%
     4452352  libpython2.7.so.1.0        0.02%
     4472832  perf                       0.02%
     4603904  git                        0.01%
     4751360  libcrypto.so.1.1.0g        0.00%
     5005312  libslang.so.2.3.1          0.00%
     7315456  libgtk-3.so.0.2200.26      0.09%
     8818688  i965_dri.so                2.46%
     8818688  i965_dri.so (deleted)      1.26%
    12414976  libmozjs-52.so.0.0.0       0.03%
    23642112  cc1                        2.02%
    27889664  [kernel.kallsyms]         25.41%
    80834560  libxul.so (deleted)       15.68%
    98078720  chrome                    32.03%
  1056964608  [kernel.kallsyms]          1.59%
  #
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180327060956.1c01ebe67a2a941bb4468c6f@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b74d12d5
  31. 28 3月, 2018 2 次提交