- 30 7月, 2005 3 次提交
-
-
由 Jean Delvare 提交于
A few split string in i2c (and now hwmon) drivers lack a joining space, causing them to display incorrectly. This trivial patch fixes that up. Please apply, thanks. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ladislav Michl 提交于
DS1339 manual, page 6, chapter Date and time operation: The DS1339 can be run in either 12-hour or 24-hour mode. Bit 6 of the hours register is defined as the 12-hour or 24-hour mode-select bit. When high, the 12-hour mode is selected. Patch below makes ds1337 driver work as documented in manual. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kumar Gala 提交于
I2C-MPC: Restore code removed A previous patch to remove support for the OCP device model was way to generious and moved some of the platform device model code, oops. Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 7月, 2005 6 次提交
-
-
由 Jon Smirl 提交于
Fix a buffer overflow vunerabilty in previous cmap patch Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
This patch is an attempt to fix deadlocks discovered in the core dm. The problems boil down to md->lock having to be held in too many places, so I've split it into two: md->suspend_lock and md->io_lock. suspend_lock is now held throughout dm_suspended() as well as dm_resume() and dm_swap_table() so that these functions cannot run concurrently: there's no requirement for that and it added complexity. DMF_FS_LOCKED becomes redundant: DMF_SUSPENDED provides adequate protection. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Avoid another bdget_disk which can deadlock. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Some code tidy-ups in preparation for the next patches. Change dm_table_pre/postsuspend_targets to accept NULL. Use dm_suspended() throughout. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Felix 提交于
This patch adds functionality to check the PCI sub-class code of an AHCI capable device before disabling AHCI. It fixes a bug where an ICH7 sata controller is being setup by the BIOS as sub-class 1 (ide) and the AHCI control registers weren't being initialized, thus causing an IO error in piix_disable_ahci(). Signed-off-by: NGregory Felix <greg.felix@gmail.com>
-
由 Dave Jones 提交于
* ret has no need to be unsigned in cpufreq_driver_target() * ret has no need to be initialized in __cpufreq_governor() Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 28 7月, 2005 31 次提交
-
-
由 Bjorn Helgaas 提交于
If the PCDP supplies parity, use it (only none/even/odd supported), and don't append parity/stop bit arguments unless baud is present. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tony Luck 提交于
sys_reboot() now calls device_suspend(), so it is no longer necessary for the e1000 driver to register a reboot notifier [in fact doing so results in e1000_suspend() getting called twice]. (akpm: we need to fast-track this. It's causing ia64 to oops on shutdown) Signed-off-by: NTony Luck <tony.luck@intel.com> Cc: <cramerj@intel.com> Cc: <john.ronciak@intel.com> Cc: <ganesh.venkatesan@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <icampbell@arcom.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch adds per disk queue functionality to cciss. Sometime back I submitted a patch but it looks like only part of what I needed. In the 2.6 kernel if we have more than one logical volume the driver will Oops during rmmod. It seems all of the queues actually point back to the same queue. So after deleting the first volume you hit a null pointer on the second one. This has been tested in our labs. There is no difference in performance, it just fixes the Oops. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Ritz 提交于
Older O2Micro bridges have problems with both read prefetch and write burst depending on the combination of the chipset, bridge, cardbus card. safest is to disable read prefetch and write burst on those old bridges. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Ritz 提交于
Resume doesn't seem to work without. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Debugging and description from: Noah Misch <noah@cs.caltech.edu> When a driver calls pcmcia_request_irq with IRQ_HANDLE_PRESENT unset, it looks for an open IRQ by request_irq()ing with a dummy handler and NULL dev_info. free_irq uses dev_info as a key for identifying the handler to free among those sharing an IRQ, so request_irq returns -EINVAL if dev_info is NULL and the IRQ may be shared. That unknown error code is the -EINVAL. It looks like only pcnet_cs and axnet_cs are affected. Most other drivers let pcmcia_request_irq install their interrupt handlers. sym53c500_cs requests its IRQ manually, but it cannot share an IRQ. The appended patch changes pcmcia_request_irq to pass an arbitrary, unique, non-NULL dev_info with the dummy handler. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Komuro 提交于
If the product-id-string contains the '+' , '&' ,'_', it was not converted properly from the /etc/pcmcia/config(pcmcia-cs config file). Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Avoid double iounmap of one address, and disable cis_virt if set_mem_map failed. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Get the au1000 PCMCIA socket drivers to work. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jar 提交于
Remove duplicates from the device id table. Signed-off-by: NJarkko Raja <jar@pcuf.fi> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Roskin 提交于
There are two problems with the message about missing callback functions: it's not written in correct English and it lacks newline at the end. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Roskin 提交于
SanDisk ConnectPlus has two functions. Function 0 is prism2 card, currently only supported by HostAP (not in the kernel). Function 1 is 128M flash, supported by ide-cs. This patch adds an entry for function 1 to ide-cs.c. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Vasquez 提交于
This adds the appropriate FW_LOADER pre-requisite and a separate entry for ISP24xx support. Thanks to Adrian Bunk and Jesper Juhl for their efforts in fixing this quirk. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hal Rosenstock 提交于
Only print debug messages when debug_level is set. Eliminate NULL checks prior to calling kfree. Signed-off-by: NHal Rosenstock <halr@voltaire.com> Signed-off-by: NLibor Michalek <libor@topspin.com>
-
由 Linus Torvalds 提交于
If we haven't configured the qla24xx driver, then the Makefile shouldn't do it for us. This also means that we can avoid the unnecessary selection of FC_ATTRS. Debugged by James Bottomley
-
由 Jesper Juhl 提交于
a) update entry in CREDITS for Jesper Juhl b) remove email address from source files so it's only listed in credits. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
`gcc -W' likes to complain if the static keyword is not at the beginning of the declaration. This patch fixes all remaining occurrences of "inline static" up with "static inline" in the entire kernel tree (140 occurrences in 47 files). While making this change I came across a few lines with trailing whitespace that I also fixed up, I have also added or removed a blank line or two here and there, but there are no functional changes in the patch. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Januszewski 提交于
The fb_info struct, as defined in include/linux/fb.h, contains an element that is supposed to hold the current color map: struct fb_cmap cmap; /* Current cmap */ This cmap is currently never updated when either fb_set_cmap() or fb_set_user_cmap() are called. As a result, info->cmap contains the default cmap that was set by a device driver/fbcon and a userspace application using the FBIOGETCMAP ioctl will not always get the *currently* used color map. The patch fixes this by making sure the cmap is copied to info->cmap after it is set correctly. It moves most of the code that is responsible for setting the cmap to fb_set_cmap() and out of fb_set_user_cmap() to avoid code-duplication. Signed-off-by: NMichal Januszewski <spock@gentoo.org> Cc: <linux-fbdev-devel@lists.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Januszewski 提交于
Currently even when the cursor is disabled (`setterm -cursor off`), it is still repainted as a black rectangle the size of a single char. This can be seen, for example, by chvt'ing to a free tty, disabling the cursor and doing `dd if=3D/dev/urandom of=3D/dev/fb0`. The patch changes this behaviour by avoiding painting anything when the cursor is disabled. Signed-off-by: NMichal Januszewski <spock@gentoo.org> Cc: <linux-fbdev-devel@lists.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Smirl 提交于
Color maps have up to 256 entries. 4096/256 allows for 16 characters per line. The format for a cmap entry is "%02x%c%4x%4x%4x\n" %02x entry %c transp %4x red %4x blue %4x green You can read the color_map with cat fb0/color_map. Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Smirl 提交于
radeonfb does not clean up EDID sysfs attribute Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Smirl 提交于
fbdev is missing unregister_chrdev() on unload. Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Smirl 提交于
Fix rounding error when mode frequency is very close to monitor limit Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Acked-by: NJames Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcelo Tosatti 提交于
m8xx_cpm_hostalloc() can't rely on using the coherent DMA allocator early on boot because the VM is not fully up yet. Change it to use the on-board DPRAM instead. The current code relies on the "bootmem_page" allocated by m8xx_cpm_reset(), which must be killed. This is done in v2.4 but has never been forward ported to v2.6. Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Pantelis Antoniou <panto@intracom.gr> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Rename lgdt3302 to lgdt330x, to make way for the addition of lgdt3303 support in future revisions. I am changing the name of this module now so that hopefully the name will be changed before the release of 2.6.13 ... It wouldn't make sense to release 2.6.13 with the name lgdt3302 in it, which will only be renamed to lgdt330x in later versions. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Hunold 提交于
I noticed that some past changes to the gerneric Video4Linux tuner module for analog tuners broke my "Multimedia eXtension Board" driver. The tuner driver was made aware of Video4Linux2 tuning ioctls, but my driver was not ported and still uses the Video4Linux1 ioctls. This does not work anymore as intendend, the tuning is currently broken. The attached patch fixes non-working tuning in MXB driver introduced by some recent generic tuner changes by replacing Video4Linux1 tuner ioctls with proper Video4Linux2 tuner ioctls. - fix non-working tuning in MXB driver introduced by some recent generic tuner changes by replacing Video4Linux1 tuner ioctls with proper Video4Linux2 tuner ioctls Signed-off-by: NMichael Hunold <hunold@linuxtv.org> Cc: Michael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
The #define CONFIG_DVB_* are actually CFLAGS set by Makefile. CONFIG_* namespace is reserved for Kconfig. This renames them back to HAVE_* Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
This patch moves #define from cx88-dvb.c and saa7134-dvb.c into Makefile as CFLAGS, allowing code compatability with video4linux cvs. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
This patch adds a missing #ifdef to saa7134-dvb.c (thanks to Mauro Carvalho Chehab) and changes #if to #ifdef in both files. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Remove unneeded comment. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-