max_vruntime() simplification.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

fix sched_fork(): large latencies at new task creation time because
the ->vruntime was not fixed up cross-CPU, if the parent got migrated
after the child's CPU got set up.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

fix sign check error in place_entity() - we'd get excessive
latencies due to negatives being converted to large u64's.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

undo some of the recent changes that are not needed after all,
such as last_min_vruntime.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

remove last_min_vruntime use - prepare to remove it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

remove condition from set_task_cpu(). Now that ->vruntime
is not global anymore, it should (and does) work fine without
it too.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

entity_key() fix - we'd occasionally end up with a 0 vruntime
in the !initial case.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

debug feature: check how well we schedule within a reasonable
vruntime 'spread' range. (note that CPU overload can increase
the spread, so this is not a hard condition, but normal loads
should be within the spread.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

more width for parameter printouts in /proc/sched_debug.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

add vslice: the load-dependent "virtual slice" a task should
run ideally, so that the observed latency stays within the
sched_latency window.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

print the current value of all tunables in /proc/sched_debug output.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

remove unneeded tunables.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

build fix for the SCHED_DEBUG && !SCHEDSTATS case.
Signed-off-by: NS.Ceglar Onur <caglar@pardus.org.tr>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

add per task and per rq BKL usage statistics.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

enable CONFIG_FAIR_GROUP_SCHED=y by default.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

fair-group sched, cleanups.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Enable user-id based fair group scheduling. This is useful for anyone
who wants to test the group scheduler w/o having to enable
CONFIG_CGROUPS.

A separate scheduling group (i.e struct task_grp) is automatically created for 
every new user added to the system. Upon uid change for a task, it is made to 
move to the corresponding scheduling group.

A /proc tunable (/proc/root_user_share) is also provided to tune root
user's quota of cpu bandwidth.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

With the view of supporting user-id based fair scheduling (and not just
container-based fair scheduling), this patch renames several functions
and makes them independent of whether they are being used for container
or user-id based fair scheduling.

Also fix a problem reported by KAMEZAWA Hiroyuki (wrt allocating
less-sized array for tg->cfs_rq[] and tf->se[]).
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

- Print &rq->cfs statistics as well (useful for group scheduling)
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

- print nr_running and load information for cfs_rq in /proc/sched_debug
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

- fix a minor bug in yield (seen for CONFIG_FAIR_GROUP_SCHED),
  group scheduling would skew when yield was called.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Revert removal of set_curr_task.
Use put_prev_task/set_curr_task when changing groups/policies

Signed-off-by: Srivatsa Vaddagiri < vatsa@linux.vnet.ibm.com>
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

some trivial whitespace cleanups.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

fix formatting of /proc/sched_debug
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

enhance debug output by changing 12345678 nsecs to 12.345678 output,
this is more human-readable.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

print the correct amount of dashes in /proc/sched_debug.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

rework enqueue/dequeue_entity() to get rid of 
sched_class::set_curr_task(). This simplifies sched_setscheduler(), 
rt_mutex_setprio() and sched_move_tasks().

   text    data     bss     dec     hex filename
  24330    2734      20   27084    69cc sched.o.before
  24233    2730      20   26983    6967 sched.o.after
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

the 'p' (task_struct) parameter in the sched_class :: yield_task() is
redundant as the caller is always the 'current'. Get rid of it.

   text    data     bss     dec     hex filename
  24341    2734      20   27095    69d7 sched.o.before
  24330    2734      20   27084    69cc sched.o.after
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

due to the fact that we no longer keep the 'current' within the tree, 
dequeue/enqueue_entity() is useless for the 'current' in 
task_new_fair(). We are about to reschedule and 
sched_class->put_prev_task() will put the 'current' back into the tree, 
based on its new key.

   text    data     bss     dec     hex filename
  24388    2734      20   27142    6a06 sched.o.before
  24341    2734      20   27095    69d7 sched.o.after
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

fix delay accounting performance regression - those sched_clock()
calls are not needed.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Get rid of 'sched_entity::fair_key'.

As a side effect, 'current' is not kept withing the tree for 
SCHED_NORMAL/BATCH tasks anymore. This simplifies some parts of code 
(e.g. entity_tick() and yield_task_fair()) and also somewhat optimizes 
them (e.g. a single update_curr() now vs. dequeue/enqueue() before in 
entity_tick()).
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

p->sched_class->set_curr_task() has to be called before 
activate_task()/enqueue_task() in rt_mutex_setprio(), 
sched_setschedule() and sched_move_task() in order to set up 
'cfs_rq->curr'. The logic of enqueueing depends on whether a task to be 
inserted is 'current' or not.
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Fix a problem in the 'sched-group' patch for !CONFIG_FAIR_GROUP_SCHED.

description:

sched_setscheduler()
{
...
if (task_running()) p->sched_class->put_prev_entity();

[ this one sets up cfs_rq->curr to NULL ]

...

if (task_running) p->sched_class->set_curr_task();

[ and this one is a _NOP_ (empty) for !CONFIG_FAIR_GROUP_SCHED ]

As a result, the task continues to run with cfs_rq->curr == NULL... no 
crashes (due to checks for !NULL in place) but e.g. update_curr() 
effectively becomes a NOP... i.e. runtime statistics for this task is 
not accounted untill it's rescheduled anew.
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Add interface to control cpu bandwidth allocation to task-groups.

(not yet configurable, due to missing CONFIG_CONTAINERS)
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

fix SMP migration latencies: the vruntimes of different CPUs are
at incompatible offsets so they have to be fixed up when migrating
a task across CPUs.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Better min_vruntime tracking: update it every time 'curr' is
updated - not just when a task is enqueued into the tree.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

sched.o gets smaller and faster if we compile it with -fomit-frame-pointers,
so make this a config option. The cost is the loss of multi-depth wchan
lookups - but SysRq-T is a sufficient replacement for them anyway, so their
utility is much lower these days.

the size difference is significant:

   text    data     bss     dec     hex filename
  34005    3462      24   37491    9273 sched.o.before
  33470    3462      24   36956    905c sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Better placement of #ifdef CONFIG_SCHEDSTAT block in dequeue_entity().
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

remove wait_runtime based fields and features, now that the CFS
math has been changed over to the vruntime metric.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

remove the wait_runtime-limit fields and the code depending on it, now
that the math has been changed over to rely on the vruntime metric.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>