mainline inclusion
from mainline-v5.16-rc1
commit d7268998
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4QCBG
CVE: NA

----------------------

The arch timer driver never reads the various TVAL registers, only
writes to them. It is thus pointless to provide accessors
for them and to implement errata workarounds.

Drop these read-side accessors, and add a couple of BUG() statements
for the time being. These statements will be removed further down
the line.
Reviewed-by: NOliver Upton <oupton@google.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-3-maz@kernel.orgSigned-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: NHanjun Guo <guohanjun@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.16-rc1
commit 4775bc63
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4QCBG
CVE: NA

--------------------------

As we are about to change the registers that are used by the driver,
start by adding build-time checks to ensure that we always handle
all registers and access modes.
Suggested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-2-maz@kernel.orgSigned-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: NHanjun Guo <guohanjun@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-5.12-rc1
commit 0de70e28
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4QAGM?from=project-issue

-------------------------------------------------

Multiple filters (struct can_filter) can be set with the setsockopt()
function, which was originally intended as a write-only operation.

As getsockopt() also provides a CAN_RAW_FILTER option to read back the
given filters, the caller has to provide an appropriate user space buffer.
In the case this buffer is too small the getsockopt() silently truncates
the filter information and gives no information about the needed space.
This is safe but not convenient for the programmer.

In net/core/sock.c the SO_PEERGROUPS sockopt had a similar requirement
and solved it by returning -ERANGE in the case that the provided data
does not fit into the given user space buffer and fills the required size
into optlen, so that the caller can retry with a matching buffer length.

This patch adopts this approach for CAN_RAW_FILTER getsockopt().
Reported-by: NPhillip Schichtel <phillip@schich.tel>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Tested-By: NPhillip Schichtel <phillip@schich.tel>
Link: https://lore.kernel.org/r/20201216174928.21663-1-socketcan@hartkopp.netSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NZiyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

euleros inclusion
category: feature
feature: etmem
bugzilla: https://gitee.com/openeuler/kernel/issues/I4OODH?from=project-issue
CVE: NA

-------------------------------------------------

Add proc/sys/vm/hugepage_nocache_copy switch. Set 1 to copy hugepage
with movnt SSE instructoin if cpu support it. Set 0 to copy hugepage
as usual.
Signed-off-by: NKemeng Shi <shikemeng@huawei.com>
Reviewed-by: Nlouhongxiang <louhongxiang@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 88f20cccbeec9a5e83621df5cc2453b5081454dc
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=88f20cccbeec9a5e83621df5cc2453b5081454dc

--------------------------------

commit be81992f upstream.

In case a guest isn't consuming incoming network traffic as fast as it
is coming in, xen-netback is buffering network packages in unlimited
numbers today. This can result in host OOM situations.

Commit f48da8b1 ("xen-netback: fix unlimited guest Rx internal
queue and carrier flapping") meant to introduce a mechanism to limit
the amount of buffered data by stopping the Tx queue when reaching the
data limit, but this doesn't work for cases like UDP.

When hitting the limit don't queue further SKBs, but drop them instead.
In order to be able to tell Rx packages have been dropped increment the
rx_dropped statistics counter in this case.

It should be noted that the old solution to continue queueing SKBs had
the additional problem of an overflow of the 32-bit rx_queue_len value
would result in intermittent Tx queue enabling.

This is part of XSA-392

Fixes: f48da8b1 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping")
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 525875c410df5d876b9615c44885ca7640aed6f2
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=525875c410df5d876b9615c44885ca7640aed6f2

--------------------------------

commit 6032046e upstream.

Commit 1d5d4852 ("xen-netback: require fewer guest Rx slots when
not using GSO") introduced a security problem in netback, as an
interface would only be regarded to be stalled if no slot is available
in the rx queue ring page. In case the SKB at the head of the queued
requests will need more than one rx slot and only one slot is free the
stall detection logic will never trigger, as the test for that is only
looking for at least one slot to be free.

Fix that by testing for the needed number of slots instead of only one
slot being available.

In order to not have to take the rx queue lock that often, store the
number of needed slots in the queue data. As all SKB dequeue operations
happen in the rx queue kernel thread this is safe, as long as the
number of needed slots is accessed via READ/WRITE_ONCE() only and
updates are always done with the rx queue lock held.

Add a small helper for obtaining the number of free slots.

This is part of XSA-392

Fixes: 1d5d4852 ("xen-netback: require fewer guest Rx slots when not using GSO")
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 8fa3a370cc2af858a9ba662ca4f2bd0917550563
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8fa3a370cc2af858a9ba662ca4f2bd0917550563

--------------------------------

commit fe415186 upstream.

The Xen console driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using a lateeoi event
channel.

For the normal domU initial console this requires the introduction of
bind_evtchn_to_irq_lateeoi() as there is no xenbus device available
at the time the event channel is bound to the irq.

As the decision whether an interrupt was spurious or not requires to
test for bytes having been read from the backend, move sending the
event into the if statement, as sending an event without having found
any bytes to be read is making no sense at all.

This is part of XSA-391
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit d31b3379179d64724d3bbfa87bd4ada94e3237de
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d31b3379179d64724d3bbfa87bd4ada94e3237de

--------------------------------

commit b27d4795 upstream.

The Xen netfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

For being able to detect the case of no rx responses being added while
the carrier is down a new lock is needed in order to update and test
rsp_cons and the number of seen unconsumed responses atomically.

This is part of XSA-391
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 8ac3b6ee7c9ff2df7c99624bb1235e2e55623825
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8ac3b6ee7c9ff2df7c99624bb1235e2e55623825

--------------------------------

commit 0fd08a34 upstream.

The Xen blkfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

This is part of XSA-391
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 76ec7fe2d866b1299f759e0eb87443b03fced0ad
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=76ec7fe2d866b1299f759e0eb87443b03fced0ad

--------------------------------

commit 0706a78f upstream.

This reverts commit bd0687c1.

This patch causes a Tx only workload to go to sleep even when it does
not have to, leading to misserable performance in skb mode. It fixed
one rare problem but created a much worse one, so this need to be
reverted while I try to craft a proper solution to the original
problem.

Fixes: bd0687c1 ("xsk: Do not sleep in poll() when need_wakeup set")
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211217145646.26449-1-magnus.karlsson@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit e24fc8983025565e24f9438d3d514c280fecb0b7
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e24fc8983025565e24f9438d3d514c280fecb0b7

--------------------------------

commit 1b1da99b upstream.

Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not
used introduced by commit 9d881361 ("bus: ti-sysc: Add quirk handling
for reinit on context lost").
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 70692b06208c09c3cc2a0de2aaef63f4f139970a
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=70692b06208c09c3cc2a0de2aaef63f4f139970a

--------------------------------

commit 2431774f upstream.

This commit marks accesses to the rcu_state.n_force_qs.  These data
races are hard to make happen, but syzkaller was equal to the task.

Reported-by: syzbot+e08a83a1940ec3846cd5@syzkaller.appspotmail.com
Acked-by: NMarco Elver <elver@google.com>
Signed-off-by: NPaul E. McKenney <paulmck@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit a9078e791426c2cbbdf28a320c3670f6e0a611e6
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a9078e791426c2cbbdf28a320c3670f6e0a611e6

--------------------------------

commit e0a2c28d upstream.

In resp_mode_select() sanity check the block descriptor len to avoid UAF.

BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032

CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
 <TASK>
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113

Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.comReported-by: Nsyzkaller <syzkaller@googlegroups.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NGeorge Kennedy <george.kennedy@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit bdb854f134b964528fa543e0351022eb45bd7346
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bdb854f134b964528fa543e0351022eb45bd7346

--------------------------------

commit 36e07d7e upstream.

Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707

CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
 memcpy+0x23/0x60 mm/kasan/shadow.c:65
 memcpy include/linux/fortify-string.h:191 [inline]
 sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
 resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
 scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.comReported-by: Nsyzkaller <syzkaller@googlegroups.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NGeorge Kennedy <george.kennedy@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit aa1f912712a109b6306746133de7e5343f016b26
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=aa1f912712a109b6306746133de7e5343f016b26

--------------------------------

commit 3344b58b upstream.

If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR.  Because of
that, for a following NULL pointer check to work on the returned pointer,
kcalloc() must not be called with the size arg equal to zero. Return early
without error before the kcalloc() call if size arg is zero.

BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789

CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
 __kasan_report mm/kasan/report.c:446 [inline]
 kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
 memcpy+0x3b/0x60 mm/kasan/shadow.c:66
 memcpy include/linux/fortify-string.h:191 [inline]
 sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline]
 do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline]
 resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276
 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
 scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102
 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline]
 scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930
 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.comReported-by: Nsyzkaller <syzkaller@googlegroups.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NGeorge Kennedy <george.kennedy@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 6859985a2fbda5d1586bf44538853e1be69e85f7
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6859985a2fbda5d1586bf44538853e1be69e85f7

--------------------------------

commit 1f5573cf upstream.

Syzbot triggered the following warning in ovl_workdir_create() ->
ovl_create_real():

	if (!err && WARN_ON(!newdentry->d_inode)) {

The reason is that the cgroup2 filesystem returns from mkdir without
instantiating the new dentry.

Weird filesystems such as this will be rejected by overlayfs at a later
stage during setup, but to prevent such a warning, call ovl_mkdir_real()
directly from ovl_workdir_create() and reject this case early.

Reported-and-tested-by: syzbot+75eab84fd0af9e8bf66b@syzkaller.appspotmail.com
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 5fd7d62daa241f0d5c6d25b29b2ba4bba48872cb
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5fd7d62daa241f0d5c6d25b29b2ba4bba48872cb

--------------------------------

commit bda9a719 upstream.

Add missing inode lock annotatation; found by syzbot.

Reported-and-tested-by: syzbot+9f747458f5990eaa8d43@syzkaller.appspotmail.com
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit b99bdf127af91d53919e96292c05f737c45ea59a
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b99bdf127af91d53919e96292c05f737c45ea59a

--------------------------------

commit 44870a9e upstream.

Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.

Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:

	dvb_usbv2_init()
	  dvb_usbv2_adapter_init()
	    dvb_usbv2_adapter_frontend_init()
	      props->frontend_attach()

	  props->init()

Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex.

Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com

Fixes: 85722118 ("[media] mxl111sf: convert to new DVB USB")
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 0413f7a1a53306bc7a0b7e4d6f5dbf94761db406
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0413f7a1a53306bc7a0b7e4d6f5dbf94761db406

--------------------------------

commit bd0687c1 upstream.

Do not sleep in poll() when the need_wakeup flag is set. When this
flag is set, the application needs to explicitly wake up the driver
with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx
and/or Tx processing will be processed promptly. But the current code
in poll(), sleeps first then wakes up the driver. This means that no
driver processing will occur (baring any interrupts) until the timeout
has expired.

Fix this by checking the need_wakeup flag first and if set, wake the
driver and return to the application. Only if need_wakeup is not set
should the process sleep if there is a timeout set in the poll() call.

Fixes: 77cd0d7b ("xsk: add support for need_wakeup flag in AF_XDP rings")
Reported-by: NKeith Wiles <keith.wiles@intel.com>
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20211214102607.7677-1-magnus.karlsson@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 6b8d8ecdd980ce54fb7a51b0a0f8e3ad4ef577aa
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6b8d8ecdd980ce54fb7a51b0a0f8e3ad4ef577aa

--------------------------------

commit 737e65c7 upstream.

According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.

Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.

There are no devicetree users in mainline that use the old name,
so just remove the old entry.

Fixes: c201369d ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: NGeorge Makarov <georgemakarov1@gmail.com>
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 8affa1b68db647f854c2026fab6283673e94579f
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8affa1b68db647f854c2026fab6283673e94579f

--------------------------------

commit a02dcde5 upstream.

A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:

drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
        data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.

To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit aec5897b277b13acd8f913d777654d4d092a24f1
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=aec5897b277b13acd8f913d777654d4d092a24f1

--------------------------------

commit f3a8076e upstream.

should count on GC IP base address
Signed-off-by: NLe Ma <le.ma@amd.com>
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit c1d519263ded9a51560420e6c4a42fb02cc8c478
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c1d519263ded9a51560420e6c4a42fb02cc8c478

--------------------------------

commit 5da5231b upstream.

Avoid data corruption by rejecting pass-through commands where
T_LENGTH is zero (No data is transferred) and the dma direction
is not DMA_NONE.

Cc: <stable@vger.kernel.org>
Reported-by: syzkaller<syzkaller@googlegroups.com>
Signed-off-by: George Kennedy<george.kennedy@oracle.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 6471ebcd6f15ee9decf9d2f4acc49073215933e0
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6471ebcd6f15ee9decf9d2f4acc49073215933e0

--------------------------------

commit 6c33ff72 upstream.

Commit fab8a02b ("serial: 8250_fintek: Enable high speed mode on Fintek F81866")
introduced support to use high baudrate with Fintek SuperIO UARTs. It'll
change clocksources when the UART probed.

But when user add kernel parameter "console=ttyS0,115200 console=tty0" to make
the UART as console output, the console will output garbled text after the
following kernel message.

[    3.681188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

The issue is occurs in following step:
	probe_setup_port() -> fintek_8250_goto_highspeed()

It change clocksource from 115200 to 921600 with wrong time, it should change
clocksource in set_termios() not in probed. The following 3 patches are
implemented change clocksource in fintek_8250_set_termios().

Commit 58178914 ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H")
Commit 195638b6 ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81866")
Commit 423d9118 ("serial: 8250_fintek: Add F81966 Support")

Due to the high baud rate had implemented above 3 patches and the patch
Commit fab8a02b ("serial: 8250_fintek: Enable high speed mode on Fintek F81866")
is bugged, So this patch will remove it.

Fixes: fab8a02b ("serial: 8250_fintek: Enable high speed mode on Fintek F81866")
Signed-off-by: NJi-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20211215075835.2072-1-hpeter+linux_kernel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit a7c80674538f15f85d68138240aae440b8039519
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a7c80674538f15f85d68138240aae440b8039519

--------------------------------

commit edaa2633 upstream.

The donation calculation logic assumes that the donor has non-zero
after-donation hweight, so the lowest active hweight a donating cgroup can
have is 2 so that it can donate 1 while keeping the other 1 for itself.
Earlier, we only donated from cgroups with sizable surpluses so this
condition was always true. However, with the precise donation algorithm
implemented, f1de2439 ("blk-iocost: revamp donation amount
determination") made the donation amount calculation exact enabling even low
hweight cgroups to donate.

This means that in rare occasions, a cgroup with active hweight of 1 can
enter donation calculation triggering the following warning and then a
divide-by-zero oops.

 WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867]
 ...
 RIP: 0010:transfer_surpluses.cold+0x0/0x53
 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0
4
 ...
 Call Trace:
  <IRQ>
  ioc_timer_fn+0x1043/0x1390
  call_timer_fn+0xa1/0x2c0
  __run_timers.part.0+0x1ec/0x2e0
  run_timer_softirq+0x35/0x70
 ...
 iocg: invalid donation weights in /a/b: active=1 donating=1 after=0

Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding
these extreme low hweight donations shouldn't affect work conservation in
any meaningful way.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: f1de2439 ("blk-iocost: revamp donation amount determination")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/Ybfh86iSvpWKxhVM@slm.duckdns.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit bcebb8eb1948c412189f087c0d0d073bc8f960d9
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bcebb8eb1948c412189f087c0d0d073bc8f960d9

--------------------------------

commit 8ffea259 upstream.

Add MODULE_ALIAS_FS() to load the module automatically when you do "mount
-t zonefs".

Fixes: 8dcc1a9d ("fs: New zonefs file system")
Cc: stable <stable@vger.kernel.org> # 5.6+
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: NJohannes Thumshirn <jth@kernel.org>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 1c414ff63b2ddb2e4125ce071ddf87e0ec03de46
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1c414ff63b2ddb2e4125ce071ddf87e0ec03de46

--------------------------------

commit 33fab972 upstream.

When creating a subvolume, at create_subvol(), we allocate an anonymous
device and later call btrfs_get_new_fs_root(), which in turn just calls
btrfs_get_root_ref(). There we call btrfs_init_fs_root() which assigns
the anonymous device to the root, but if after that call there's an error,
when we jump to 'fail' label, we call btrfs_put_root(), which frees the
anonymous device and then returns an error that is propagated back to
create_subvol(). Than create_subvol() frees the anonymous device again.

When this happens, if the anonymous device was not reallocated after
the first time it was freed with btrfs_put_root(), we get a kernel
message like the following:

  (...)
  [13950.282466] BTRFS: error (device dm-0) in create_subvol:663: errno=-5 IO failure
  [13950.283027] ida_free called for id=65 which is not allocated.
  [13950.285974] BTRFS info (device dm-0): forced readonly
  (...)

If the anonymous device gets reallocated by another btrfs filesystem
or any other kernel subsystem, then bad things can happen.

So fix this by setting the root's anonymous device to 0 at
btrfs_get_root_ref(), before we call btrfs_put_root(), if an error
happened.

Fixes: 2dfb1e43 ("btrfs: preallocate anon block device at first phase of snapshot creation")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 005d9292b5b2e71a009f911bd85d755009b37242
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=005d9292b5b2e71a009f911bd85d755009b37242

--------------------------------

commit f35838a6 upstream.

Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(),
but  when the function returns in line 1184 (#4) victim_name allocated
by line 1169 (#3) is not freed, which will lead to a memory leak.
There is a similar snippet of code in this function as allocating a memory
chunk for victim_name in line 1104 (#1) as well as releasing the memory
in line 1116 (#2).

We should kfree() victim_name when the return value of backref_in_log()
is less than zero and before the function returns in line 1184 (#4).

1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans,
1058 				  struct btrfs_root *root,
1059 				  struct btrfs_path *path,
1060 				  struct btrfs_root *log_root,
1061 				  struct btrfs_inode *dir,
1062 				  struct btrfs_inode *inode,
1063 				  u64 inode_objectid, u64 parent_objectid,
1064 				  u64 ref_index, char *name, int namelen,
1065 				  int *search_done)
1066 {

1104 	victim_name = kmalloc(victim_name_len, GFP_NOFS);
	// #1: kmalloc (victim_name-1)
1105 	if (!victim_name)
1106 		return -ENOMEM;

1112	ret = backref_in_log(log_root, &search_key,
1113			parent_objectid, victim_name,
1114			victim_name_len);
1115	if (ret < 0) {
1116		kfree(victim_name); // #2: kfree (victim_name-1)
1117		return ret;
1118	} else if (!ret) {

1169 	victim_name = kmalloc(victim_name_len, GFP_NOFS);
	// #3: kmalloc (victim_name-2)
1170 	if (!victim_name)
1171 		return -ENOMEM;

1180 	ret = backref_in_log(log_root, &search_key,
1181 			parent_objectid, victim_name,
1182 			victim_name_len);
1183 	if (ret < 0) {
1184 		return ret; // #4: missing kfree (victim_name-2)
1185 	} else if (!ret) {

1241 	return 0;
1242 }

Fixes: d3316c82 ("btrfs: Properly handle backref_in_log retval")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJianglei Nie <niejianglei2021@163.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit cd98cb5216a01f13296f759f790a1310c648d4c9
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cd98cb5216a01f13296f759f790a1310c648d4c9

--------------------------------

commit 2b503c85 upstream.

Add the following Telit FN990 compositions:

0x1070: tty, adb, rmnet, tty, tty, tty, tty
0x1071: tty, adb, mbim, tty, tty, tty, tty
0x1072: rndis, tty, adb, tty, tty, tty, tty
0x1073: tty, adb, ecm, tty, tty, tty, tty
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 5c93584d9a2fd7e9e4238868c754b5eb0acf5452
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5c93584d9a2fd7e9e4238868c754b5eb0acf5452

--------------------------------

commit 83b67041 upstream.

When generalising GPIO support and adding support for CP2102N, the GPIO
registration for some CP2105 devices accidentally broke. Specifically,
when all the pins of a port are in "modem" mode, and thus unavailable
for GPIO use, the GPIO chip would now be registered without having
initialised the number of GPIO lines. This would in turn be rejected by
gpiolib and some errors messages would be printed (but importantly probe
would still succeed).

Fix this by initialising the number of GPIO lines before registering the
GPIO chip.

Note that as for the other device types, and as when all CP2105 pins are
muxed for LED function, the GPIO chip is registered also when no pins
are available for GPIO use.
Reported-by: NMaarten Brock <m.brock@vanmierlo.com>
Link: https://lore.kernel.org/r/5eb560c81d2ea1a2b4602a92d9f48a89@vanmierlo.com
Fixes: c8acfe0a ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org      # 4.19
Cc: Karoly Pados <pados@pados.hu>
Link: https://lore.kernel.org/r/20211126094348.31698-1-johan@kernel.orgReviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: NMaarten Brock <m.brock@vanmierlo.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 8f207f12630bc52221accb8f89957425e27bcfa0
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8f207f12630bc52221accb8f89957425e27bcfa0

--------------------------------

commit f886d4fb upstream.

AMD's Yellow Carp platform has few more XHCI controllers,
enable the runtime power management support for the same.
Signed-off-by: NNehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit e5949933f313c9e2c30ba05b977a047148b5e38c
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e5949933f313c9e2c30ba05b977a047148b5e38c

--------------------------------

commit 83dbf898 upstream.

Masking all unused MSI-X entries is done to ensure that a crash kernel
starts from a clean slate, which correponds to the reset state of the
device as defined in the PCI-E specificion 3.0 and later:

 Vector Control for MSI-X Table Entries
 --------------------------------------

 "00: Mask bit:  When this bit is set, the function is prohibited from
                 sending a message using this MSI-X Table entry.
                 ...
                 This bit’s state after reset is 1 (entry is masked)."

A Marvell NVME device fails to deliver MSI interrupts after trying to
enable MSI-X interrupts due to that masking. It seems to take the MSI-X
mask bits into account even when MSI-X is disabled.

While not specification compliant, this can be cured by moving the masking
into the success path, so that the MSI-X table entries stay in device reset
state when the MSI-X setup fails.

[ tglx: Move it into the success path, add comment and amend changelog ]

Fixes: aa8092c1d1f1 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211210161025.3287927-1-sr@denx.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit f8aa09186c3068478133dcd129a2f3ba39e104af
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f8aa09186c3068478133dcd129a2f3ba39e104af

--------------------------------

commit 94185adb upstream.

PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X
interrupt setup time. It's cleared on success, but the error handling path
only clears the PCI_MSIX_FLAGS_ENABLE bit.

That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is
zero. That can be observed via lspci:

        Capabilities: [b0] MSI-X: Enable- Count=67 Masked+

Clear the bit in the error path to restore the reset state.

Fixes: 43855395 ("PCI/MSI: Enable and mask MSI-X early")
Reported-by: NStefan Roese <sr@denx.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NStefan Roese <sr@denx.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglxSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit d17c5a389768eb658b6a36eab3c25326813d46b1
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d17c5a389768eb658b6a36eab3c25326813d46b1

--------------------------------

commit fac6bf87 upstream.

When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies
on sensing comparators. This detection needs time to stabilize.
A delay was already applied in dwc2_resume() when reactivating the
detection, but it wasn't done in dwc2_probe().
This patch adds delay after enabling STM ID/VBUS detection. Then, ID state
is good when initializing gadget and host, and avoid to get a wrong
Connector ID Status Change interrupt.

Fixes: a415083a ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS")
Cc: stable <stable@vger.kernel.org>
Acked-by: NMinas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: NAmelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 2b2edc8fc5a8b4a5ff953a395f8aeeb5413299b6
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2b2edc8fc5a8b4a5ff953a395f8aeeb5413299b6

--------------------------------

commit 0ad3bd56 upstream.

This device doesn't work well with LPM, losing connectivity intermittently.
Disable LPM to resolve the issue.

Reviewed-by: <markpearson@lenovo.com>
Signed-off-by: NJimmy Wang <wangjm221@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211214012652.4898-1-wangjm221@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit fd623e16b2ff83ce8579f1ce11ad5f2debeabfbb
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fd623e16b2ff83ce8579f1ce11ad5f2debeabfbb

--------------------------------

commit 1ee33b1c upstream.

syzbot is reporting that an unprivileged user who logged in from tty
console can crash the system using a reproducer shown below [1], for
n_hdlc_tty_wakeup() is synchronously calling n_hdlc_send_frames().

----------
  #include <sys/ioctl.h>
  #include <unistd.h>

  int main(int argc, char *argv[])
  {
    const int disc = 0xd;

    ioctl(1, TIOCSETD, &disc);
    while (1) {
      ioctl(1, TCXONC, 0);
      write(1, "", 1);
      ioctl(1, TCXONC, 1); /* Kernel panic - not syncing: scheduling while atomic */
    }
  }
----------

Linus suspected that "struct tty_ldisc"->ops->write_wakeup() must not
sleep, and Jiri confirmed it from include/linux/tty_ldisc.h. Thus, defer
n_hdlc_send_frames() from n_hdlc_tty_wakeup() to a WQ context like
net/nfc/nci/uart.c does.

Link: https://syzkaller.appspot.com/bug?extid=5f47a8cea6a12b77a876 [1]
Reported-by: Nsyzbot <syzbot+5f47a8cea6a12b77a876@syzkaller.appspotmail.com>
Cc: stable <stable@vger.kernel.org>
Analyzed-by: NFabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Confirmed-by: NJiri Slaby <jirislaby@kernel.org>
Reviewed-by: NFabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/40de8b7e-a3be-4486-4e33-1b1d1da452f8@i-love.sakura.ne.jpSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 9439fabfc349c3e8eacfb6b0856d6739de129969
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9439fabfc349c3e8eacfb6b0856d6739de129969

--------------------------------

[ Upstream commit 1aa2abb3 ]

The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should
not depend on guest visible CPUID entries, even if just to allow
creating/restoring guest MSRs and CPUIDs in any sequence.

Fixes: 27461da3 ("KVM: x86/pmu: Support full width counting")
Suggested-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-3-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 5fe305c6d485e55f964f5b60923234cedf24d57a
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5fe305c6d485e55f964f5b60923234cedf24d57a

--------------------------------

[ Upstream commit c4d936ef ]

This reverts commit 796eed4b.

This change causes boot lockups when using "arlyprintk=xdbc" because
ktime can not be used at this point in time in the boot process.  Also,
it is not needed for very small delays like this.
Reported-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Fixes: 796eed4b ("usb: early: convert to readl_poll_timeout_atomic()")
Link: https://lore.kernel.org/r/c2b5c9bb-1b75-bf56-3754-b5b18812d65e@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit fcf9194d366c5c2e903c4f0f594d6bffbd92da8e
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fcf9194d366c5c2e903c4f0f594d6bffbd92da8e

--------------------------------

[ Upstream commit c2fcbf81 ]

The libbpf CI reported occasional failure in btf_skc_cls_ingress:

  test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
  bpf prog error at line 97

"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received.  It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".

The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.

The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.

Fixes: 9a856cae ("bpf: selftest: Add test_btf_skc_cls_ingress")
Reported-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.88
commit 6f46c59e60b64620d5d386c8ee2eaa11ebe3b595
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f46c59e60b64620d5d386c8ee2eaa11ebe3b595

--------------------------------

[ Upstream commit e28587cc ]

ipip6_dev_free is sit dev->priv_destructor, already called
by register_netdevice() if something goes wrong.

Alternative would be to make ipip6_dev_free() robust against
multiple invocations, but other drivers do not implement this
strategy.

syzbot reported:

dst_release underflow
WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173
Modules linked in:
CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173
Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48
RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246
RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000
RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c
R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358
R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000
FS:  00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160
 ipip6_dev_free net/ipv6/sit.c:1414 [inline]
 sit_init_net+0x229/0x550 net/ipv6/sit.c:1936
 ops_init+0x313/0x430 net/core/net_namespace.c:140
 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326
 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470
 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226
 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075
 __do_sys_unshare kernel/fork.c:3146 [inline]
 __se_sys_unshare kernel/fork.c:3144 [inline]
 __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f66c882ce99
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200
RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000
 </TASK>

Fixes: cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211216111741.1387540-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>