Just like MGMT_OP_START_DISCOVERY, we should reject
MGMT_OP_START_SERVICE_DISCOVERY with MGMT_STATUS_BUSY when we are paused
for suspend.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Increment the mgmt revision due to the recently added new commands.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

For advertising, we wish to know the LE tx power capabilities of the
controller in userspace, so this patch edits the Security Info MGMT
command to be more generic, such that other various controller
capabilities can be included in the EIR data. This change also includes
the LE min and max tx power into this newly-named command.

The change was tested by manually verifying that the MGMT command
returns the tx power range as expected in userspace.
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch takes the min/max intervals and tx power optionally provided
in mgmt interface, stores them in the advertisement struct, and uses
them when configuring the hci requests. While tx power is not used if
extended advertising is unavailable, software rotation will use the min
and max advertising intervals specified by the client.

This change is validated manually by ensuring the min/max intervals are
propagated to the controller on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks, and that tx power is
propagated correctly on hatch. These tests are performed with multiple
advertisements simultaneously.
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch adds support for the new advertising add interface, with the
first command setting advertising parameters and the second to set
advertising data. The set parameters command allows the caller to leave
some fields "unset", with a params bitfield defining which params were
purposefully set. Unset parameters will be given defaults when calling
hci_add_adv_instance. The data passed to the param mgmt command is
allowed to be flexible, so in the future if bluetoothd passes a larger
structure with new params, the mgmt command will ignore the unknown
members at the end.

This change has been validated on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks running bluetoothd that
support this new interface. I ran the following manual tests:
- Set several (3) advertisements using modified test_advertisement.py
- For each, validate correct data and parameters in btmon trace
- Verified both for software rotation and extended adv

Automatic test suite also run, testing many (25) scenarios of single and
multi-advertising for data/parameter correctness.
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Signed-off-by: NReo Shiseki <reoshiseki@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead
of always reporting it as supported.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Update device disconnect event with reason 0x5 to indicate that device
disconnected because the controller is suspending.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Add the controller suspend and resume events, which will signal when
Bluetooth has completed preparing for suspend and when it's ready for
resume.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

For new advertising features, it will be important for userspace to
know the capabilities of the controller and kernel. If the controller
and kernel support extended advertising, we include flags indicating
hardware offloading support and support for setting tx power of adv
instances.

In the future, vendor-specific commands may allow the setting of tx
power in advertising instances, but for now this feature is only
marked available if extended advertising is supported.

This change is manually verified in userspace by ensuring the
advertising manager's supported_flags field is updated with new flags on
hatch chromebook (ext advertising supported).
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Here we make sure we properly report the number of supported
advertising slots when we are using hardware offloading. If no
hardware offloading is available, we default this value to
HCI_MAX_ADV_INSTANCES for use in software rotation as before.

This change has been tested on kukui (no ext adv) and hatch (ext adv)
chromebooks by verifying "SupportedInstances" shows 5 (the default) and
6 (slots supported by controller), respectively.
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

read_adv_mon_features() is leaking memory. Free `rp` before returning.

Fixes: e5e1e7fd ("Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURES")
Reported-and-tested-by: syzbot+f7f6e564f4202d8601c6@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=f7f6e564f4202d8601c6Signed-off-by: NPeilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Increment the mgmt revision due to the recently added new commands.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch adds support to enable the use of RPA Address resolution
using expermental feature mgmt command.
Signed-off-by: NSathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In this patch if le_create_conn process is started restrict to
disable address resolution and same is disabled during
le_enh_connection_complete
Signed-off-by: NSathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Add functionality to disable and remove advertising instances,
and use that functionality in MGMT add/remove advertising calls.

Currently, advertising is globally-disabled, i.e. all instances are
disabled together, even if hardware offloading is available. This
patch adds functionality to disable and remove individual adv
instances, solving two issues:

1. On new advertisement registration, a global disable was done, and
then only the new instance was enabled. This meant only the newest
instance was actually enabled.

2. On advertisement removal, the structure was removed, but the instance
was never disabled or removed, which is incorrect with hardware offload
support.
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Reviewed-by: NShyh-In Hwang <josephsih@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds an le_simult_central_peripheral features which allows a
clients to determine if the controller is able to support peripheral and
central connections separately and at the same time.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Adding hci_dev_lock since hci_conn_params_(lookup|add) require this
lock.
Suggested-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If user decides to cancel the ongoing pairing process (e.g. by clicking
the cancel button on pairing/passkey window), abort any ongoing pairing
and then terminate the link if it was created because of the pair
device action.
Signed-off-by: NManish Mandlik <mmandlik@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This calls hci_update_background_scan() when there is any update on the
advertisement monitors. If there is at least one advertisement monitor,
the filtering policy of scan parameters should be 0x00. This also reports
device found mgmt events if there is at least one monitor.

The following cases were tested with btmgmt advmon-* commands.
(1) add a ADV monitor and observe that the passive scanning is
triggered.
(2) remove the last ADV monitor and observe that the passive scanning is
terminated.
(3) with a LE peripheral paired, repeat (1) and observe the passive
scanning continues.
(4) with a LE peripheral paired, repeat (2) and observe the passive
scanning continues.
(5) with a ADV monitor, suspend/resume the host and observe the passive
scanning continues.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This notifies management sockets on MGMT_EV_ADV_MONITOR_REMOVED event.

The following test was performed.
- Start two btmgmt consoles, issue a btmgmt advmon-remove command on one
console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This notifies management sockets on MGMT_EV_ADV_MONITOR_ADDED event.

The following test was performed.
- Start two btmgmt consoles, issue a btmgmt advmon-add command on one
console and observe a MGMT_EV_ADV_MONITOR_ADDED event on the other
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This adds the request handler of MGMT_OP_REMOVE_ADV_MONITOR command.
Note that the controller-based monitoring is not yet in place. This
removes the internal monitor(s) without sending HCI traffic, so the
request returns immediately.

The following test was performed.
- Issue btmgmt advmon-remove with valid and invalid handles.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This adds the request handler of MGMT_OP_ADD_ADV_PATTERNS_MONITOR command.
Note that the controller-based monitoring is not yet in place. This tracks
the content of the monitor without sending HCI traffic, so the request
returns immediately.

The following manual test was performed.
- Issue btmgmt advmon-add with valid and invalid inputs.
- Issue btmgmt advmon-add more the allowed number of monitors.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This adds the request handler of MGMT_OP_READ_ADV_MONITOR_FEATURES
command. Since the controller-based monitoring is not yet in place, this
report only the supported features but not the enabled features.

The following test was performed.
- Issuing btmgmt advmon-features.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Add the get device flags and set device flags mgmt ops and the device
flags changed event. Their behavior is described in detail in
mgmt-api.txt in bluez.

Sample btmon trace when a HID device is added (trimmed to 75 chars):

@ MGMT Command: Unknown (0x0050) plen 11        {0x0001} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00                 ...........
@ MGMT Event: Unknown (0x002a) plen 15          {0x0004} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00     ...............
@ MGMT Event: Unknown (0x002a) plen 15          {0x0003} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00     ...............
@ MGMT Event: Unknown (0x002a) plen 15          {0x0002} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00     ...............
@ MGMT Event: Command Compl.. (0x0001) plen 10  {0x0001} [hci0] 18:06:14.98
      Unknown (0x0050) plen 7
        Status: Success (0x00)
        90 c5 13 cd f3 cd 02                             .......
@ MGMT Command: Add Device (0x0033) plen 8      {0x0001} [hci0] 18:06:14.98
        LE Address: CD:F3:CD:13:C5:90 (Static)
        Action: Auto-connect remote device (0x02)
@ MGMT Event: Device Added (0x001a) plen 8      {0x0004} [hci0] 18:06:14.98
        LE Address: CD:F3:CD:13:C5:90 (Static)
        Action: Auto-connect remote device (0x02)
@ MGMT Event: Device Added (0x001a) plen 8      {0x0003} [hci0] 18:06:14.98
        LE Address: CD:F3:CD:13:C5:90 (Static)
        Action: Auto-connect remote device (0x02)
@ MGMT Event: Device Added (0x001a) plen 8      {0x0002} [hci0] 18:06:14.98
        LE Address: CD:F3:CD:13:C5:90 (Static)
        Action: Auto-connect remote device (0x02)
@ MGMT Event: Unknown (0x002a) plen 15          {0x0004} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00     ...............
@ MGMT Event: Unknown (0x002a) plen 15          {0x0003} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00     ...............
@ MGMT Event: Unknown (0x002a) plen 15          {0x0002} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00     ...............
@ MGMT Event: Unknown (0x002a) plen 15          {0x0001} [hci0] 18:06:14.98
        90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00     ...............
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

In order to more easily add device flags to classic devices, create
a new type of bdaddr_list that supports setting flags.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This adds the required read/set commands for runtime configuration. Even
while currently no parameters are specified, the commands are made
available.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch implements the read default system parameters and the set
default system parameters mgmt commands.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In case dynamic debug is disabled, this feature allows a vendor platform
to provide debug statement printing.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

To enable platform specific experimental features, introduce this new set of
management commands and events.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The majority of management interaction are based on a controller index
and have a hci_dev associated with it. So use bt_dev_dbg to have a clean
way of indentifying the controller the debug message belongs to.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The event MGMT_EV_PHY_CONFIGURATION_CHANGED wasn't listed in the list of
supported events. So add it.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Increment the mgmt revision due to the recently added new commands.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

To allow userspace to make correcty security policy decision, the kernel
needs to export a few details of the supported security features and
encryption key size information. This command exports this information
and also allows future extensions if needed.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

To prevent spurious wake ups, we disable any discovery or advertising
when we enter suspend and restore it when we exit suspend. While paused,
we disable any management requests to modify discovery or advertising.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If an error occurs during request building in add_advertising(),
remember to send MGMT_STATUS_FAILED command status back to bluetoothd.
Signed-off-by: NJoseph Hwang <josephsih@chromium.org>
Signed-off-by: NManish Mandlik <mmandlik@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Increment the mgmt revision due to the recently added setting and
command.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This change introduces a wide band speech setting which allows higher
level clients to query the local controller support for wide band speech
as well as set the setting state when the radio is powered off.
Internally, this setting controls if erroneous data reporting is enabled
on the controller.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>