Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 04 10月, 2017 11 次提交
    • C
      net: dsa: mt7530: make functions mt7530_phy_write static · 360cc342
      由 Colin Ian King 提交于 
      The function mt7530_phy_write is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warnings:
symbol 'mt7530_phy_write' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      360cc342
    • C
      net: dsa: lan9303: make functions lan9303_mdio_phy_{read|write} static · 161ae6b0
      由 Colin Ian King 提交于 
      The functions lan9303_mdio_phy_write and lan9303_mdio_phy_read are local
to the source and do not need to be in global scope, so make them static.

Cleans up sparse warnings:
symbol 'lan9303_mdio_phy_write' was not declared. Should it be static?
symbol 'lan9303_mdio_phy_read' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      161ae6b0
    • D
      Merge branch 'mlxsw-mc-route-offload' · da885b61
      由 David S. Miller 提交于 
      Jiri Pirko says:

====================
mlxsw: Add support for partial multicast route offload

Yotam says:

Previous patchset introduced support for offloading multicast MFC routes to
the Spectrum hardware. As described in that patchset, no partial offloading
is supported, i.e if a route has one output interface which is not a valid
offloadable device (e.g. pimreg device, dummy device, management NIC), the
route is trapped to the CPU and the forwarding is done in slow-path.

Add support for partial offloading of multicast routes, by letting the
hardware to forward the packet to all the in-hardware devices, while the
kernel ipmr module will continue forwarding to all other interfaces.

Similarly to the bridge, the kernel ipmr module will forward a marked
packet to an interface only if the interface has a different parent ID than
the packet's ingress interfaces.

The first patch introduces the offload_mr_fwd_mark skb field, which can be
used by offloading drivers to indicate that a packet had already gone
through multicast forwarding in hardware, similarly to the offload_fwd_mark
field that indicates that a packet had already gone through L2 forwarding
in hardware.

Patches 2 and 3 change the ipmr module to not forward packets that had
already been forwarded by the hardware, i.e. packets that are marked with
offload_mr_fwd_mark and the ingress VIF shares the same parent ID with the
egress VIF.

Patches 4, 5, 6 and 7 add the support in the mlxsw Spectrum driver for trap
and forward routes, while marking the trapped packets with the
offload_mr_fwd_mark.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      da885b61
    • Y
      mlxsw: spectrum: mr: Support trap-and-forward routes · f60c2549
      由 Yotam Gigi 提交于 
      Add the support of trap-and-forward route action in the multicast routing
offloading logic. A route will be set to trap-and-forward action if one (or
more) of its output interfaces is not offload-able, i.e. does not have a
valid Spectrum RIF.

This way, a route with mixed output VIFs list, which contains both
offload-able and un-offload-able devices can go through partial offloading
in hardware, and the rest will be done in the kernel ipmr module.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f60c2549
    • Y
      mlxsw: spectrum: mr_tcam: Add trap-and-forward multicast route · 607feade
      由 Yotam Gigi 提交于 
      In addition to the current multicast route actions, which include trap
route action and a forward route action, add the trap-and-forward multicast
route action, and implement it in the multicast routing hardware logic.

To implement that, add a trap-and-forward ACL action as the last action in
the route flexible action set. The used trap is the ACL2 trap, which marks
the packets with offload_mr_forward_mark, to prevent the packet from being
forwarded again by the kernel.

Note: At that stage the offloading logic does not support trap-and-forward
multicast routes. This patch adds the support only in the hardware logic.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      607feade
    • Y
      mlxsw: spectrum: Add trap for multicast trap-and-forward routes · a0040c8c
      由 Yotam Gigi 提交于 
      When a multicast route is configured with trap-and-forward action, the
packets should be marked with skb->offload_mr_fwd_mark, in order to prevent
the packets from being forwarded again by the kernel ipmr module.

Due to this, it is not possible to use the already existing multicast trap
(MLXSW_TRAP_ID_ACL1) as the packet should be marked differently. Add the
MLXSW_TRAP_ID_ACL2 which is for trap-and-forward multicast routes, and set
the offload_mr_fwd_mark skb field in its handler.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a0040c8c
    • Y
      mlxsw: acl: Introduce ACL trap and forward action · 26787243
      由 Yotam Gigi 提交于 
      Use trap/discard flex action to implement trap and forward. The action will
later be used for multicast routing, as the multicast routing mechanism is
done using ACL flexible actions in Spectrum hardware. Using that action, it
will be possible to implement a trap-and-forward route.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      26787243
    • Y
      ipv4: ipmr: Don't forward packets already forwarded by hardware · a5bc9294
      由 Yotam Gigi 提交于 
      Change the ipmr module to not forward packets if:
 - The packet is marked with the offload_mr_fwd_mark, and
 - Both input interface and output interface share the same parent ID.

This way, a packet can go through partial multicast forwarding in the
hardware, where it will be forwarded only to the devices that share the
same parent ID (AKA, reside inside the same hardware). The kernel will
forward the packet to all other interfaces.

To do this, add the ipmr_offload_forward helper, which per skb, ingress VIF
and egress VIF, returns whether the forwarding was offloaded to hardware.
The ipmr_queue_xmit frees the skb and does not forward it if the result is
a true value.

All the forwarding path code compiles out when the CONFIG_NET_SWITCHDEV is
not set.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a5bc9294
    • Y
      ipv4: ipmr: Add the parent ID field to VIF struct · 5d8b3e69
      由 Yotam Gigi 提交于 
      In order to allow the ipmr module to do partial multicast forwarding
according to the device parent ID, add the device parent ID field to the
VIF struct. This way, the forwarding path can use the parent ID field
without invoking switchdev calls, which requires the RTNL lock.

When a new VIF is added, set the device parent ID field in it by invoking
the switchdev_port_attr_get call.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5d8b3e69
    • Y
      skbuff: Add the offload_mr_fwd_mark field · abf4bb6b
      由 Yotam Gigi 提交于 
      Similarly to the offload_fwd_mark field, the offload_mr_fwd_mark field is
used to allow partial offloading of MFC multicast routes.

Switchdev drivers can offload MFC multicast routes to the hardware by
registering to the FIB notification chain. When one of the route output
interfaces is not offload-able, i.e. has different parent ID, the route
cannot be fully offloaded by the hardware. Examples to non-offload-able
devices are a management NIC, dummy device, pimreg device, etc.

Similar problem exists in the bridge module, as one bridge can hold
interfaces with different parent IDs. At the bridge, the problem is solved
by the offload_fwd_mark skb field.

Currently, when a route cannot go through full offload, the only solution
for a switchdev driver is not to offload it at all and let the packet go
through slow path.

Using the offload_mr_fwd_mark field, a driver can indicate that a packet
was already forwarded by hardware to all the devices with the same parent
ID as the input device. Further patches in this patch-set are going to
enhance ipmr to skip multicast forwarding to devices with the same parent
ID if a packets is marked with that field.

The reason why the already existing "offload_fwd_mark" bit cannot be used
is that a switchdev driver would want to make the distinction between a
packet that has already gone through L2 forwarding but did not go through
multicast forwarding, and a packet that has already gone through both L2
and multicast forwarding.

For example: when a packet is ingressing from a switchport enslaved to a
bridge, which is configured with multicast forwarding, the following
scenarios are possible:
 - The packet can be trapped to the CPU due to exception while multicast
   forwarding (for example, MTU error). In that case, it had already gone
   through L2 forwarding in the hardware, thus A switchdev driver would
   want to set the skb->offload_fwd_mark and not the
   skb->offload_mr_fwd_mark.
 - The packet can also be trapped due to a pimreg/dummy device used as one
   of the output interfaces. In that case, it can go through both L2 and
   (partial) multicast forwarding inside the hardware, thus a switchdev
   driver would want to set both the skb->offload_fwd_mark and
   skb->offload_mr_fwd_mark.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellaox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      abf4bb6b
    • A
      cxgb4: Update comment for min_mtu · a047fbae
      由 Arjun Vynipadath 提交于 
      We have lost a comment for minimum mtu value set for netdevice with
'commit d894be57 ("ethernet: use net core MTU range checking in
more drivers"). Updating it accordingly.
Signed-off-by: NArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a047fbae
  3. 03 10月, 2017 29 次提交