There is a race between two __unregister_request() callers: the
reply path and the ceph_osdc_wait_request().  If we get a reply
*and* the timeout expires at roughly the same time, both callers
will try to unregister the request, and the second one will do bad
things.

Simply check if the request is still already unregistered; if so,
return immediately and do nothing.

Fixes http://tracker.newdream.net/issues/2420Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Move the addition of the authorizer buffer to a connection's
out_kvec out of get_connect_authorizer() and into its caller.  This
way, the caller--prepare_write_connect()--can avoid adding the
connect header to out_kvec before it has been fully initialized.

Prior to this patch, it was possible for a connect header to be
sent over the wire before the authorizer protocol or buffer length
fields were initialized.  An authorizer buffer associated with that
header could also be queued to send only after the connection header
that describes it was on the wire.

Fixes http://tracker.newdream.net/issues/2424Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Change the name of prepare_connect_authorizer().  The next
patch is going to make this function no longer add anything to the
connection's out_kvec, so it will no longer fit the pattern of
the rest of the prepare_connect_*() functions.

In addition, pass the address of a variable that will hold the
authorization protocol to use.  Move the assignment of that to the
connection's out_connect structure into prepare_write_connect().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Change prepare_connect_authorizer() so it returns a pointer (or
pointer-coded error).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Rather than passing a bunch of arguments to be filled in with the
content of the ceph_auth_handshake buffer now returned by the
get_authorizer method, just use the returned information in the
caller, and drop the unnecessary arguments.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Have the get_authorizer auth_client method return a ceph_auth
pointer rather than an integer, pointer-encoding any returned
error value.  This is to pave the way for making use of the
returned value in an upcoming patch.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In the create_authorizer method for both the mds and osd clients,
the auth_client->ops pointer is blindly dereferenced.  There is no
obvious guarantee that this pointer has been assigned.  And
furthermore, even if the ops pointer is non-null there is definitely
no guarantee that the create_authorizer or destroy_authorizer
methods are defined.

Add checks in both routines to make sure they are defined (non-null)
before use.  Add similar checks in a few other spots in these files
while we're at it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Make use of the new ceph_auth_handshake structure in order to reduce
the number of arguments passed to the create_authorizor method in
ceph_auth_client_ops.  Use a local variable of that type as a
shorthand in the get_authorizer method definitions.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

The definitions for the ceph_mds_session and ceph_osd both contain
five fields related only to "authorizers."  Encapsulate those fields
into their own struct type, allowing for better isolation in some
upcoming patches.

Fix the #includes in "linux/ceph/osd_client.h" to lay out their more
complete canonical path.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In prepare_connect_authorizer(), a connection's get_authorizer
method is called but ignores its return value.  This function can
return an error, so check for it and return it if that ever occurs.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Change prepare_connect_authorizer() so it returns without dropping
the connection mutex if the connection has no get_authorizer method.

Use the symbolic CEPH_AUTH_UNKNOWN instead of 0 when assigning
authorization protocols.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

prepare_write_connect() can return an error, but only one of its
callers checks for it.  All the rest are in functions that already
return errors, so it should be fine to return the error if one
gets returned.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

prepare_write_connect() prepares a connect message, then sets
WRITE_PENDING on the connection.  Then *after* this, it calls
prepare_connect_authorizer(), which updates the content of the
connection buffer already queued for sending.  It's also possible it
will result in prepare_write_connect() returning -EAGAIN despite the
WRITE_PENDING big getting set.

Fix this by preparing the connect authorizer first, setting the
WRITE_PENDING bit only after that is done.

Partially addresses http://tracker.newdream.net/issues/2424Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In all cases, the value passed as the msgr argument to
prepare_write_connect() is just con->msgr.  Just get the msgr
value from the ceph connection and drop the unneeded argument.

The only msgr passed to prepare_write_banner() is also therefore
just the one from con->msgr, so change that function to drop the
msgr argument as well.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

prepare_write_connect() has an argument indicating whether a banner
should be sent out before sending out a connection message.  It's
only ever set in one of its callers, so move the code that arranges
to send the banner into that caller and drop the "include_banner"
argument from prepare_write_connect().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reset a connection's kvec fields in the caller rather than in
prepare_write_connect().   This ends up repeating a few lines of
code but it's improving the separation between distinct operations
on the connection, which we can take advantage of later.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Move the kvec reset for a connection out of prepare_write_banner and
into its only caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Old users may not expect EINVAL, and there is no clear user-visibile
behavior change now that we ignore it.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

When we are setting a new layout, fully initialize the structure:
 - zero it out
 - always set preferred_osd to -1
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Make the second argument to read_partial() be the ending input byte
position rather than the beginning offset it now represents.  This
amounts to moving the addition "to + size" into the caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

read_partial() always increases whatever "to" value is supplied by
adding the requested size to it, and that's the only thing it does
with that pointed-to value.

Do that pointer advance in the caller (and then only when the
updated value will be subsequently used), and change the "to"
parameter to be an in-only and non-pointer value.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

There are two blocks of code in read_partial_message()--those that
read the header and footer of the message--that can be replaced by a
call to read_partial().  Do that.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Each attribute is prefixed with "snap_".
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>

This function rereads the entire header and handles any changes in
it, not just changes in snapshots.
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>

Snapshot sizes should be the same type as regular image sizes. This
only affects their displayed size in sysfs, not the reported size of
an actual block device sizes.
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>

The snapid parameters passed to rbd_do_op() and rbd_req_sync_op()
are now always either a valid snapid or an explicit CEPH_NOSNAP.

[elder@dreamhost.com: Rephrased the description]
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>

When a device was open at a snapshot, and snapshots were deleted or
added, data from the wrong snapshot could be read. Instead of
assuming the snap context is constant, store the actual snap id when
the device is initialized, and rely on the OSDs to signal an error
if we try reading from a snapshot that was deleted.
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>

This is updated whenever a snapshot is added or deleted, and the
snapc pointer is changed with every refresh of the header.
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>

ondisk->snap_count is read from disk via rbd_req_sync_read() and thus
needs validation.  Otherwise, a bogus `snap_count' could overflow the
kmalloc() size, leading to memory corruption.

Also use `u32' consistently for `snap_count'.

[elder@dreamhost.com: changed to use UINT_MAX rather than ULONG_MAX]
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>

We should use the gfp_flags that the caller specified instead of
GFP_KERNEL here.

There is only one caller and it uses GFP_KERNEL, so this change is
just a cleanup and doesn't change how the code works.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>

Given a large n, the bounds check (*p + n > end) can be bypassed due to
pointer wraparound.  A safer check is (n > end - *p).

[elder@dreamhost.com: inverted test and renamed ceph_has_room()]
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>

From Al Viro <viro@zeniv.linux.org.uk>

Al Viro noticed that we were using a non-cpu-encoded value in
a switch statement in osd_req_encode_op().  The result would
clearly not work correctly on a big-endian machine.
Signed-off-by: NAlex Elder <elder@dreamhost.com>

If we get an error code from crush_do_rule(), print an error to the
console.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 46d63d98434b3bc9dad2fc9ab23cbaedc3bcb0e4.
Reported-by: NAlexander Lyakas <alex.bolshoy@gmail.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Fix the node weight lookup for tree buckets by using a correct accessor.

Reflects ceph.git commit d287ade5bcbdca82a3aef145b92924cf1e856733.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

These were used for the ill-fated forcefeed feature.  Remove them.

Reflects ceph.git commit ebdf80edfecfbd5a842b71fbe5732857994380c1.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Remove forcefeed functionality from CRUSH.  This is an ugly misfeature that
is mostly useless and unused.  Remove it.

Reflects ceph.git commit ed974b5000f2851207d860a651809af4a1867942.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Conflicts:

	net/ceph/crush/mapper.c

Use a temporary variable here to avoid repeated array lookups and clean up
the code a bit.

This reflects ceph.git commit 6b5be27634ad307b471a5bf0db85c4f5c834885f.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

If we get a map that doesn't make sense, error out or ignore the badness
instead of BUGging out.  This reflects the ceph.git commits
9895f0bff7dc68e9b49b572613d242315fb11b6c and
8ded26472058d5205803f244c2f33cb6cb10de79.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

This small adjustment reflects a change that was made in ceph.git commit
af6a9f30696c900a2a8bd7ae24e8ed15fb4964bb, about 6 months ago.  An N-1
search is not exhaustive.  Fixed ceph.git bug #1594.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>