1. 04 9月, 2022 1 次提交
  2. 31 8月, 2022 2 次提交
    • S
      gpio: realtek-otto: switch to 32-bit I/O · ee0175b3
      Sander Vanheule 提交于
      By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
      on MIPS, the IMR can end up containing garbage. This then results in
      interrupt triggers for lines that don't have an interrupt handler
      associated. The irq_desc lookup fails, and the ISR will not be cleared,
      keeping the CPU busy until reboot, or until another IMR operation
      restores the correct value. This situation appears to happen very
      rarely, for < 0.5% of IMR writes.
      
      Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
      mapped peripheral registers, switch to using 32-bit I/O only, operating
      on the entire bank for all single bit line settings. For 2-bit line
      settings, with 16-bit port values, stick to manual (un)packing.
      
      This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
      GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
      
      Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> # DGS-1210-52
      Reported-by: Birger Koblitz <mail@birger-koblitz.de> # GS728TP
      Reported-by: Jan Hoffmann <jan@3e8.eu> # 1920-16G
      Fixes: 0d82fb11 ("gpio: Add Realtek Otto GPIO support")
      Signed-off-by: NSander Vanheule <sander@svanheule.net>
      Cc: Paul Cercueil <paul@crapouillou.net>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: NBartosz Golaszewski <brgl@bgdev.pl>
      ee0175b3
    • H
      gpio: pca953x: Add mutex_lock for regcache sync in PM · 518e26f1
      Haibo Chen 提交于
      The regcache sync will set the cache_bypass = true, at that
      time, when there is regmap write operation, it will bypass
      the regmap cache, then the regcache sync will write back the
      value from cache to register, which is not as our expectation.
      
      Though regmap already use its internal lock to avoid such issue,
      but this driver force disable the regmap internal lock in its
      regmap config: disable_locking = true
      
      To avoid this issue, use the driver's own lock to do the protect
      in system PM.
      
      Fixes: b7657430 ("gpio: pca953x: Restore registers after suspend/resume cycle")
      Signed-off-by: NHaibo Chen <haibo.chen@nxp.com>
      Signed-off-by: NBartosz Golaszewski <brgl@bgdev.pl>
      518e26f1
  3. 28 8月, 2022 1 次提交
  4. 19 8月, 2022 2 次提交
  5. 15 8月, 2022 6 次提交
    • L
      Linux 6.0-rc1 · 568035b0
      Linus Torvalds 提交于
      568035b0
    • Y
      radix-tree: replace gfp.h inclusion with gfp_types.h · 9f162193
      Yury Norov 提交于
      Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
      have gfp_types.h for this.
      
      Fixes powerpc allmodconfig build:
      
         In file included from include/linux/nodemask.h:97,
                          from include/linux/mmzone.h:17,
                          from include/linux/gfp.h:7,
                          from include/linux/radix-tree.h:12,
                          from include/linux/idr.h:15,
                          from include/linux/kernfs.h:12,
                          from include/linux/sysfs.h:16,
                          from include/linux/kobject.h:20,
                          from include/linux/pci.h:35,
                          from arch/powerpc/kernel/prom_init.c:24:
         include/linux/random.h: In function 'add_latent_entropy':
      >> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
            25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
               |                                              ^~~~~~~~~~~~~~
               |                                              add_latent_entropy
         include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
      Reported-by: Nkernel test robot <lkp@intel.com>
      CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      CC: Andrew Morton <akpm@linux-foundation.org>
      CC: Jason A. Donenfeld <Jason@zx2c4.com>
      Signed-off-by: NYury Norov <yury.norov@gmail.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9f162193
    • L
      Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 74cbb480
      Linus Torvalds 提交于
      Pull vfs lseek fix from Al Viro:
       "Fix proc_reg_llseek() breakage. Always had been possible if somebody
        left NULL ->proc_lseek, became a practical issue now"
      
      * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        take care to handle NULL ->proc_lseek()
      74cbb480
    • A
      take care to handle NULL ->proc_lseek() · 3f61631d
      Al Viro 提交于
      Easily done now, just by clearing FMODE_LSEEK in ->f_mode
      during proc_reg_open() for such entries.
      
      Fixes: 868941b1 "fs: remove no_llseek"
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      3f61631d
    • L
      Merge tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip · 5d6a0f4d
      Linus Torvalds 提交于
      Pull more xen updates from Juergen Gross:
      
       - fix the handling of the "persistent grants" feature negotiation
         between Xen blkfront and Xen blkback drivers
      
       - a cleanup of xen.config and adding xen.config to Xen section in
         MAINTAINERS
      
       - support HVMOP_set_evtchn_upcall_vector, which is more compliant to
         "normal" interrupt handling than the global callback used up to now
      
       - further small cleanups
      
      * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
        MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
        xen: remove XEN_SCRUB_PAGES in xen.config
        xen/pciback: Fix comment typo
        xen/xenbus: fix return type in xenbus_file_read()
        xen-blkfront: Apply 'feature_persistent' parameter when connect
        xen-blkback: Apply 'feature_persistent' parameter when connect
        xen-blkback: fix persistent grants negotiation
        x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
      5d6a0f4d
    • L
      Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of... · 96f86ff0
      Linus Torvalds 提交于
      Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
      
      Pull more perf tool updates from Arnaldo Carvalho de Melo:
      
       - 'perf c2c' now supports ARM64, adjust its output to cope with
         differences with what is in x86_64. Now go find false sharing on
         ARM64 (at least Neoverse) as well!
      
       - Refactor the JSON processing, making the output more compact and thus
         reducing the size of the resulting perf binary
      
       - Improvements for 'perf offcpu' profiling, including tracking child
         processes
      
       - Update Intel JSON metrics and events files for broadwellde,
         broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
         knightslanding, sapphirerapids, skylakex and snowridgex
      
       - Add 'perf stat' JSON output and a 'perf test' entry for it
      
       - Ignore memfd and anonymous mmap events if jitdump present
      
       - Refactor 'perf test' shell tests allowing subdirs
      
       - Fix an error handling path in 'parse_perf_probe_command()'
      
       - Fixes for the guest Intel PT tracing patchkit in the 1st batch of
         this merge window
      
       - Print debuginfod queries if -v option is used, to explain delays in
         processing when debuginfo servers are enabled to fetch DSOs with
         richer symbol tables
      
       - Improve error message for 'perf record -p not_existing_pid'
      
       - Fix openssl and libbpf feature detection
      
       - Add PMU pai_crypto event description for IBM z16 on 'perf list'
      
       - Fix typos and duplicated words on comments in various places
      
      * tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
        perf test: Refactor shell tests allowing subdirs
        perf vendor events: Update events for snowridgex
        perf vendor events: Update events and metrics for skylakex
        perf vendor events: Update metrics for sapphirerapids
        perf vendor events: Update events for knightslanding
        perf vendor events: Update metrics for jaketown
        perf vendor events: Update metrics for ivytown
        perf vendor events: Update events and metrics for icelakex
        perf vendor events: Update events and metrics for haswellx
        perf vendor events: Update events and metrics for cascadelakex
        perf vendor events: Update events and metrics for broadwellx
        perf vendor events: Update metrics for broadwellde
        perf jevents: Fold strings optimization
        perf jevents: Compress the pmu_events_table
        perf metrics: Copy entire pmu_event in find metric
        perf pmu-events: Hide the pmu_events
        perf pmu-events: Don't assume pmu_event is an array
        perf pmu-events: Move test events/metrics to JSON
        perf test: Use full metric resolution
        perf pmu-events: Hide pmu_events_map
        ...
      96f86ff0
  6. 14 8月, 2022 28 次提交