- 22 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
- replace NULL == xxx with !xxx - replace NULL != xxx with xxx - similar trivial cleanups Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
Fix a few uninitialized error checks that were introduced recently mistakenlly during the clean-up: sound/pci/ctxfi/ctamixer.c: In function ‘get_amixer_rsc’: sound/pci/ctxfi/ctamixer.c:261: warning: ‘err’ may be used uninitialized in this function sound/pci/ctxfi/ctamixer.c: In function ‘get_sum_rsc’: sound/pci/ctxfi/ctamixer.c:415: warning: ‘err’ may be used uninitialized in this function sound/pci/ctxfi/ctsrc.c: In function ‘get_srcimp_rsc’: sound/pci/ctxfi/ctsrc.c:742: warning: ‘err’ may be used uninitialized in this function Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 7月, 2009 2 次提交
-
-
由 Frank Roth 提交于
On Soundblaster X-FI Titanium with emu20k2 the SIDE and SURROUND channels were swapped and wrong. I double checked it with connector colors and creative soundblaster windows drivers. So I swapped them to the true order. Now "speaker-test -c6" and "speaker-test -c8" are working fine. Signed-off-by: NFrank Roth <frashman@freenet.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the native timer support for emu20k2, which gives much more accurate update timing than the system timer. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 7月, 2009 1 次提交
-
-
由 David Heidelberger 提交于
Simplify ALC882_TARGA and return gpio3 to ALC883_TARGA_DIG and ALC883_TARGA_2ch_DIG, which I accidentally removed in commit id 64a8be74Signed-off-by: NDavid Heidelberger <d.okias@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 7月, 2009 2 次提交
-
-
由 Paul Vojta 提交于
In the beep tone calculation for IDT/STAC codecs, lower numbers correspond to higher frequencies and vice versa. The current code has this backwards, resulting in beep frequencies which are way too high (and sound bad on tinny laptop speakers, resulting in complaints). [Also added hz <= 0 check by tiwai] Signed-off-by: NPaul Vojta <vojta@math.berkeley.edu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Joe Perches 提交于
Commit 5fd29d6c ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 7月, 2009 4 次提交
-
-
由 Darren Salt 提交于
There is a regression, introduced in aa202455 (in alsa-kernel) which I noticed when trying to use the headphone socket on my EeeCPC 901: the output was *very* quiet, practically silent. This patch corrects the control types to that which was obviously intended in the referenced commit. Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andiry Brienza 提交于
HDA driver disabled HD audio 64bit address support for all AMD SB600/SB700/SB800 platforms with commit 09240cf4 due to one SB600 issue reported by community, but we do not see the similar issue on SB700/SB800 platforms. This patch is to refine the workaround for SB600 only. Signed-off-by: NAndiry Xu <andiry.xu@amd.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Check the widget type and don't take invalid widgets while parsing the capture source in patch_via.c. Also, fixed some compile warnings introduced in the previous commit. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
The fixed widget NIDs in patch_via.c seem wrong for some codecs, and it resulted in the invalid capture source selection. This patch adds the code to parse the topology instead of using fixed numbers in order to get the right MUX widget id corresponding to the ADCs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
If the output pin is used and EAPD capability is present, turn on the EAPD bit. This fixes the silent output problem on ASUS laptops with VT1708S codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
Minor clean up for initializing the digital-in pin. No functional changes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Release resources cleanly after errors in the sanity check in azx_pcm_open(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 7月, 2009 4 次提交
-
-
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add some sanity checks of struct snd_pcm_hardware fields in the PCM open callback of hda driver. This makes a bit easier to debug any PCM setup errors in the codec side. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
The PCM rates bit field may have been changed by the codec open callback. In that case, we need to reset rate_min and rate_max. So, simply call snd_pcm_lib_hw_rates() again after the codec open callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
Check whether formats and rates don't result in zero due to the restriction of SPDIF sharing. If any of them can be zero, disable the SPDIF sharing mode instead. Otherwise it will lead to a PCM configuration error. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
The mixer elements created for ASUS eeePC 1000 with ALC269 aren't standard but strange words like "LineOut". Rename the element names to follow the standard one like "Headphone" and "Speaker". Also, split the volumes to each so that the virtual master can control them. The alc269_fujitsu_mixer is removed because it's now identical with the new eeepc mixer. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
HP laptops with AD1984A codecs (at least mobile models) need to set GPIO1 appropriately to indicate the mute state. The BIOS checks this bit to judge whether the mute on or off is sent via F8 key. Without changing this bit, the BIOS can be confused and may toggle the mute wrongly. Reference: Novell bnc#515266 https://bugzilla.novell.com/show_bug.cgi?id=515266Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 7月, 2009 2 次提交
-
-
由 Clemens Ladisch 提交于
When resuming, we better take the DACs out of the reset state before trying to use them. Reference: kernel bug #13599 http://bugzilla.kernel.org/show_bug.cgi?id=13599Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a quirk model=laptop for HP 6930p (103c:30dc) with AD1984A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 6月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
During the changes to clean up / fix the realtek codec initialization routines in commit 4a79ba34, I forgot to add the check for ALC268 and ALC269. This resulted in the missing EAPD and COEF setup for these codecs. This patch adds the missing checks for these codecs. Reference: bko#13633 http://bugzilla.kernel.org/show_bug.cgi?id=13633Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
The Line In connector is set up as PIN_IN by default, using VREF_HIZ. It is connected to both ADCs, so add it to both input selectors. Also add the ability to use the input mix (on a SoundBlaster one would call this "What You Hear"). Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 6月, 2009 7 次提交
-
-
由 Clemens Ladisch 提交于
The microphone input and its volume register have only one channel, so we have to make the corresponding mixer control a mono control. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tim Blechmann 提交于
as long as the io channel number is not set by the driver, the card is not visible from the ethersound network Signed-off-by: NTim Blechmann <tim@klingt.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Joe Perches 提交于
Here's a patch on top of the others to use CREATIVE and ECTIVA Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
For Acer Aspire 6930G (1025:015e), acre-aspire-6530g model matches obviously better. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Emilio López 提交于
Fix the following bugs of acer-aspire-6530g model with ALC888: - HP jack to mute all speaker outputs including LFE - Make digital built-in mic working Signed-off-by: NEmilio López <buhitoescolar@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Realtek codecs require the pin-sense trigger call before actually reading the pin-sense. Without this, the pin-detection might not be done accurately. This patch adds the pin-capability check and issues the trigger call if required. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 6月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
Samsung P50 requires the HP auto-muting unlike other Samsung models. Added a new model=samsung-p50 to support this. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
Add a new flag to ad_spec struct so that the same hack can be used for any other models (if any). This also allows other models to reuse the auto-mute functions. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
Split mixer element arrays of AD1986A models to several pieces so that each model can share the same mixer arrays. This removes lots of duplicated data. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 6月, 2009 5 次提交
-
-
由 Takashi Iwai 提交于
Make the jack-plug notification via input layer selectable via Kconfig. This is often unnecessary, and the similr function will be provided using the ALSA control API in near future anyway. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Wai Yew CHAY 提交于
Added the suspend/resume support to ctxfi driver. The team tested on the following seems ok: AMD Athlon 64 3500+ / ASUS A8N-E / 512MB DDR ATI / Radeon X1300 20k1 & 20k2 cards Signed-off-by: NWai Yew CHAY <wychay@ctl.creative.com> Singed-off-by: NRyan RICHARDS <ryan_richards@creativelabs.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add the digital-mic support with ALC262 auto model. The new ALC262 models have the digital mic at NID 0x12. This widget isn't checked in the current alc262_auto_create_analog_input_ctls() since it's under 0x18. So, just reuse the routine for alc269 to fix the behavior. But, it doesn't suffice: the digital mic is supported only with the ADC0, we have to exclude other ADCs when d-mic is detected. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
Fix the check of the input-source type by checking the widget type of each capture-source item. Since some codecs can have both the mixer and selector types depending on the ADC, alc_mux_enum_put() needs to check each widget. With this change, spec->capture_style gets unneeded, so it's removed, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
It needs model=toshiba-s06 to work with the digital-mic. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-