Modules: HDA Codec driver

Added the missing entries for Intel 945 boards.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

It seems that hardware requires some time to reset bus master registers.
We need to wait until ICH_RESETREGS bit is not released.

The suggestion and symptom was described by Mike Gorchak <lestat@i.com.ua>.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: ICE1712 driver

See ALSA bug#1806 for details.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: Digigram VX core,USB generic driver

There's no need to check pointers passed to vfree() for NULL.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Removed the duplicated entry in lm4550_restbl.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AD1816A driver

Fixed the bug of capture with Shark Predator ISA resulting in:
	arecord: pcm_read:1196: read error: Input/output error
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added dxs_support entry for FSC Amilo L7300.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

The following patch adds a 'test' ALC260 model specification to the
patch_realtek.c driver if CONFIG_SND_DEBUG is set.  This is similar to the
'test' ALC880 model in that it sets up mixer controls for almost everything
to make it easier for people to test their laptop/soundcard when working out
what pin widgets are connected to which real-world devices.

This patch assumes my previous patch (adding the second PCM to the ALC260)
has previously been applied since it uses infrastructure added by that
patch.

In developing this patch it was found that not all retasking pins accept all
the modes - in particular, some ignore the VREFxx variants.  The pin mode
control has therefore been tweaked to prevent this becoming a problem in
mixer applications.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Jonathan Woithe <jwoithe@physics.adelaide.edu.au>

The following patch changes the initverbs associated with the output sum
widgets 0x08, 0x09 and 0x0a used with the fujitsu model in patch_realtek.c.
It is against alsa 1.0.11rc3.

Currently these widgets have their output muted, but a close reading of the
datasheet suggests that they don't actually have an output mute.  They have
an *input* mute for each of their two inputs and a single output gain. This
patch therefore activates the input mutes and zeros the output gain.  It has
not yet been tested but the above interpretation of the ALC260 datasheet
seems correct.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

The following patch against alsa 1.0.11rc3 creates a PCM device (pcm1c) for
the second ADC present on the ALC260 codec used by the hda driver.  It also
defines a new mixer control allowing the mode of retasking pins to be set;
this means a user can (for example) designate the headphone jack to be a
second input. With this patch in place it is possible to do 4 channel
recording on laptops equipped with an ALC260 codec assuming both a stereo
line-in jack is provided in addition to a headphone jack.

Mixer controls are provided to allow the headphone jack to be switched as
an input.  In addition, an (input only) mode control is configured for
the line-in jack to allow a bias voltage to be requested (VREF80 or VREF50)
so headsets based on condensor microphones have a chance of working.

This patch has been tested on a Fujitsu S7020 laptop and as such these
features are currently only configured for the 'fujitsu' model.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Added a codec patch for LM4550.  It sets up a static volume resolution
table.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Added the support of static resolution table support for codecs
that the driver cannot probe the volume resolution properly.

The table pointer should be set in each codec patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Add a quirk entry for the Miditech Play'n Roll.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: BT87x driver

- added 0x107d:0x6606 to whitelist
- print also the pci device ID for developers when model is not known
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: ICE1712 driver

Change the value written to hardware configuration register of envy24 chip
in the case of Terratec DMX6fire to restrict the active ADCs & DACs to 6.

Also add the dxr_enable module option to eventually leave the old behaviour
when user requests.
Signed-off-by: NAlan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: USB generic driver

Rename QUIRK_MIDI_MIDITECH to QUIRK_MIDI_CME because Miditech keyboards
are built by CME and use the same protocol, and don't force a Miditech
product name for the USB ID used by both Miditech and CME UF-x
keyboards.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: I2C cs8427,ICE1712 driver

See ALSA bug#1785 for more details.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: Memalloc module

Removed unneeded page-reservation.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Memalloc module

Use dma_alloc_coherent() hack on i386 only (as a valid arch).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA<-OSS emulation

Fixed the missing mulaw -> linear conversion in OSS PCM emulation code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Add the notes on PM to ens1370/ens1371 sections.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Add comments with information about UM-1EX/UM-2EX devices.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

The G-70 has one MIDI port in each direction, no two.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: PCM Midlevel,USB generic driver

Because snd_pcm_format_name() function is used only for informational
purposes, it is no longer exported from the PCM midlevel to reduce
space and dependency. usbaudio module shows only numeric value for format.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: USB generic driver

Add a quirk entry for the Roland G-70.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: YMFPCI driver

Added rear_swap module option / kernel parameter to configure the rear
channel swapping. Default value is enable to make the AC3 passthrough
working, but analog only users might revert the previous behaviour.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fixed the structures for equalizer.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

Forth of 4 es18xx.c patches culminating in Zoom Video support.

This patch adds Zoom Video support for those chipsets that support it.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879. I could not test the Zoom Video function for an ES1878 or
ES1869.
Patches were created against the Sarge code and then edited to apply
correctly to the
ALSA cvs code. Lastly the patched ALSA cvs code was test for successful
compilation.
No additional testing was done on the ALSA cvs version.

One quirk (noted in my comments below) is that apparently the datasheet
is wrong
for one of the ES1879 Zoom Video 'enable' bits, because
 1) if you set this bit it messes up PCM playback (speaker_test play a
lower frequency)
 2) even if you don't set this bit Zoom Video still works.
I added a control to toggle the bit on just in case there might be a
version of the
ES1879 that requires it, but I expect noone will need it.
Signed-off-by: NMark Salazar <markTheCoder@justmyself.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

Third of 4 es18xx.c patches culminating in Zoom Video support.

This patch changes the Hardware Volume support to reflect the fact that
not all of the
supported chipsets have seperate registers dedicated to the Hardware
Volume inputs. Although
all the chipsets can generate an HWV interrupt whenever a Hardware
Volume input is received
only those with seperate HWV registers can split the HWV registers from
the Master volume
registers.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879 and an ES1878 machine. Patches were created against the
Sarge code and then edited
to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs
code was test for
successful compilation. No additional testing was done on the ALSA cvs
version.
Signed-off-by: NMark Salazar <markTheCoder@justmyself.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

Second of 4 es18xx.c patches culminating in Zoom Video support.

This patch changes the 'record source' mux routines to reflect the fact
that not all of the
supported chipsets have 8 possible inputs. Some have 4 and some have 5.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879 and an ES1878 machine. Patches were created against the
Sarge code and then edited
to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs
code was test for
successful compilation. No additional testing was done on the ALSA cvs
version.
Signed-off-by: NMark Salazar <markTheCoder@justmyself.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

First of 4 es18xx.c patches culminating in Zoom Video support.
While adding support for Zoom Video to the es18xx driver I found some of
the mixer controls
were wrong. Since you guys went to the trouble of supplying the
datasheets for the supported
chipsets I did a review of all of them and tried to get es18xx.c to
accurately reflect the
proper mixer controls for each chipset. If the datasheets are wrong then
so are my patches.

This first patch moves some controls from the common-to-all-chipsets array
'snd_es18xx_base_controls' to a chipset-specific array and adds code to
manage that new array.
Also while testing on my ES1878 test machine I discovered it needed a
couple of udelays in
the identify function so those are in this patch as well.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879 and an ES1878 machine. Patches were created against the
Sarge code and then edited
to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs
code was test for
successful compilation. No additional testing was done on the ALSA cvs
version.
Signed-off-by: NMark Salazar <markTheCoder@justmyself.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Add a quirk entry for the Edirol PC-50.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver

Replace snd_xxx_t typedefs with explicit structs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fix the driver codes to run on 64bit architectures.
The patch taken from ALSA BTS bug#1047.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Updated the description of ice1724 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>