- 03 8月, 2007 6 次提交
-
-
由 David S. Miller 提交于
As discovered by Evegniy Polyakov, if we try to sendmsg after a connection reset, we can do incredibly stupid things. The core issue is that inet_sendmsg() tries to autobind the socket, but we should never do that for TCP. Instead we should just go straight into TCP's sendmsg() code which will do all of the necessary state and pending socket error checks. TCP's sendpage already directly vectors to tcp_sendpage(), so this merely brings sendmsg() in line with that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2007 1 次提交
-
-
由 Paul Moore 提交于
The security_secid_to_secctx() function returns memory that must be freed by a call to security_release_secctx() which was not always happening. This patch fixes two of these problems (all that I could find in the kernel source at present). Signed-off-by: NPaul Moore <paul.moore@hp.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 01 8月, 2007 6 次提交
-
-
由 Mariusz Kozlowski 提交于
When buf_check_overflow() returns != 0 we will hit kfree(ERR_PTR(err)) and it will not be happy about it. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Graf 提交于
replay label is unused otherwise. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Wilcox 提交于
All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Wilcox 提交于
During the transition to the ethtool_ops way of doing things, we supported calling the device's ->do_ioctl method to allow unconverted drivers to continue working. Those days are long behind us, all in-tree drivers use the ethtool_ops way, and so we no longer need to support this. The bonding driver is the biggest beneficiary of this; it no longer needs to call ioctl() as a fallback if ethtool_ops aren't supported. Also put a proper copyright statement on ethtool.c. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2007 27 次提交
-
-
由 Joakim Koskela 提交于
This patch modifies the xfrm state selection logic to use the inner addresses where the outer have been (incorrectly) used. This is required for beet mode in general and interfamily setups in both tunnel and beet mode. Signed-off-by: NJoakim Koskela <jookos@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDiego Beltrami <diego.beltrami@gmail.com> Signed-off-by: NMiika Komu <miika@iki.fi> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Similar to the issue we had with template families which specified the inner families of policies, we need to set the inner families of states as the main xfrm user Openswan leaves it as zero. af_key is unaffected because the inner family is set by it and not the KM. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It's possible that new SACK blocks that should trigger new LOST markings arrive with new data (which previously made is_dupack false). In addition, I think this fixes a case where we get a cumulative ACK with enough SACK blocks to trigger the fast recovery (is_dupack would be false there too). I'm not completely pleased with this solution because readability of the code is somewhat questionable as 'is_dupack' in SACK case is no longer about dupacks only but would mean something like 'lost_marker_work_todo' too... But because of Eifel stuff done in CA_Recovery, the FLAG_DATA_SACKED check cannot be placed to the if statement which seems attractive solution. Nevertheless, I didn't like adding another variable just for that either... :-) Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Actually, the ratehalving seems to work too well, as cwnd is reduced on every second ACK even though the packets in flight remains unchanged. Recoveries in a bidirectional flows suffer quite badly because of this, both NewReno and SACK are affected. After this patch, rate halving is performed for ACK only if packets in flight was supposedly changed too. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
The following code can now become static: - struct unix_socket_table - unix_table_lock Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
nf_ct_ipv6_skip_exthdr() can now become static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
Non-static inline code usually doesn't makes sense. In this case making is static and non-inline is the correct solution. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Johnson 提交于
ipv6_addr_type() doesn't check for 'Unique Local IPv6 Unicast Addresses' (RFC4193) and returns IPV6_ADDR_RESERVED for that range. SCTP uses this function and will fail bind() and connect() calls that use RFC4193 addresses, SCTP will also ignore inbound connections from RFC4193 addresses if listening on IPV6_ADDR_ANY. There may be other users of ipv6_addr_type() that could also have problems. Signed-off-by: NDave Johnson <djohnson@sw.starentnetworks.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
Fix the check in prio_tune() to see if sch->parent is TC_H_ROOT instead of sch->handle to load or reject the qdisc for multiqueue devices. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Fix sch_api to correctly set sch->parent for both ingress and egress qdiscs in qdisc_create(). Signed-off-by: NPatrick McHardy <trash@kaber.net> Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Fix handling of empty or completely non-matching filter chains. In that case -1 is returned and tcf_result is uninitialized, the qdisc should fall back to default classification in that case. Noticed by PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Now that netdev notifications can fail, we can use this to signal errors during registration for IPv4/IPv6. In particular, if we fail to allocate memory for the inet device, we can fail the netdev registration. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds code to allow errors to be passed up from event handlers of NETDEV_REGISTER and NETDEV_CHANGENAME. It also adds the notifier_from_errno/notifier_to_errnor helpers to pass the errno value up to the notifier caller. If an error is detected when a device is registered, it causes that operation to fail. A NETDEV_UNREGISTER will be sent to all event handlers. Similarly if NETDEV_CHANGENAME fails the original name is restored and a new NETDEV_CHANGENAME event is sent. As such all event handlers must be idempotent with respect to these events. When an event handler is registered NETDEV_REGISTER events are sent for all devices currently registered. Should any of them fail, we will send NETDEV_GOING_DOWN/NETDEV_DOWN/NETDEV_UNREGISTER events to that handler for the devices which have already been registered with it. The handler registration itself will fail. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When we added name-based hashing the dev_base_lock was designated as the lock to take when changing the name hash list. Unfortunately, because it was a preexisting lock that just happened to be taken in the right spots we neglected to take it in dev_change_name. The race can affect calles of __dev_get_by_name that do so without taking the RTNL. They may end up walking down the wrong hash chain and end up missing the device that they're looking for. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch makes register_netdevice call dev->uninit if the regsitration fails after dev->init has completed successfully. Very few drivers use the init/uninit calls but at least one (drivers/net/wan/sealevel.c) may leak without this change. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As a path that forwards packets, IPVS should be using skb_forward_csum instead of directly setting ip_summed to CHECKSUM_NONE. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Since nobody uses it after we convert it to host-endian, no need to do that at all. At that point l2cap is endian-clean. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
no code changes, just documenting existing types Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
We loop through psm values, calling __l2cap_get_sock_by_addr(psm, ...) until we get NULL; then we set ->psm of our socket to htobs(psm). IOW, we find unused psm value and put it into our socket. So far, so good, but... __l2cap_get_sock_by_addr() compares its argument with ->psm of sockets. IOW, the entire thing works correctly only on little-endian. On big-endian we'll get "no socket with such psm" on the first iteration, since we won't find a socket with ->psm == 0x1001. We will happily conclude that 0x1001 is unused and slap htobs(0x1001) (i.e. 0x110) into ->psm of our socket. Of course, the next time around the same thing will repeat and we'll just get a fsckload of sockets with the same ->psm assigned. Fix: pass htobs(psm) to __l2cap_get_sock_by_addr() there. All other callers are already passing little-endian values and all places that store something in ->psm are storing little-endian. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcel Holtmann 提交于
Adrian Bunk wrote: > Commit 8de0a154 added the following > use-after-free in net/bluetooth/rfcomm/tty.c: > > <-- snip --> > > ... > static int rfcomm_dev_add(struct rfcomm_dev_req *req, struct rfcomm_dlc *dlc) > { > ... > if (IS_ERR(dev->tty_dev)) { > list_del(&dev->list); > kfree(dev); > return PTR_ERR(dev->tty_dev); > } > ... > > <-- snip --> > > Spotted by the Coverity checker. really good catch. I fully overlooked that one. The attached patch should fix it. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Arlott 提交于
The ADVMSS value was incorrectly updated for ALL routes when the MTU is updated because it's outside the effect of the if statement's condition. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
if printbuf allocation or tipc_node_attach_link() fails, invalid references to the link are left in the associated node and bearer structures. Fix by allocating printbuf early and moving timer initialization and the addition of the new link to the b_ptr->links list after tipc_node_attach_link() succeeded. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix kernel-doc omissions in net/: Warning(linux-2.6.23-rc1//net/core/dev.c:2728): No description found for parameter 'addr' Warning(linux-2.6.23-rc1//net/core/dev.c:2752): No description found for parameter 'addr' Warning(linux-2.6.23-rc1//net/core/dev.c:3839): No description found for parameter 'net_dma' Warning(linux-2.6.23-rc1//net/core/dev.c:3877): No description found for parameter 'state' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Change HTCP to use measured RTT rather than smooth RTT. Srtt is computed using the TCP receive timestamp options, so it is vulnerable to hostile receivers. To avoid any problems this might cause use the measured RTT instead. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Remove use of received timestamp option value from RTT calculation in Cubic. A hostile receiver may be returning a larger timestamp option than the original value. This would cause the sender to believe the malevolent receiver had a larger RTT and because Cubic tries to provide some RTT friendliness, the sender would then favor the liar. Instead, use the jiffie resolutionRTT value already computed and passed back after ack. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-