- 19 12月, 2011 5 次提交
-
-
由 Andrei Emeltchenko 提交于
Implement block size read function. Use different variables for packet-based and block-based flow control. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
This should simplify Bluetooth core processing a lot. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
As part of the moving on all the Bluetooth processing to Process context. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
It's pointless, we aren't protecting anything since btusb_notify() schedules a work to run, then all it operation happens without protection. If protection is really needed here, we will fix it further. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
As HCI rx path is now done in process context it makes sense to do all the timer in process context as well. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 03 12月, 2011 3 次提交
-
-
由 Andrei Emeltchenko 提交于
Make sure that code match exactly what comment says about pre 1.2 bluetooth version. Since this is HCI detail lmp_ver changed to hci_ver. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Use bluetooth names instead of BT SIG assigned numbers Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Check for hci_ver instead of lmp_ver Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 02 12月, 2011 3 次提交
-
-
由 Andre Guedes 提交于
This patch adds the parameter struct and the command complete event handler to the LE Set Scan Parameter HCI command. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch adds the dev_flags field to struct hci_dev. This new flags variable should be used to define flags related to BR/EDR and/or LE controller itself. It should be used to define flags which represents states from the controller. The dev_flags is cleared in case the controller sends a Reset Command Complete Event to the host. Also, this patch adds the HCI_LE_SCAN flag which was created to track if the controller is performing LE scan or not. The flag is set/cleared when the controller starts/stops scanning. This is an initial effort to stop using hdev->flags to define internal flags since it is exported to userspace by an ioctl. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Upstream Code Aurora function with minor trivial fixes. Origin: git://codeaurora.org/kernel/msm.gitSigned-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 01 12月, 2011 1 次提交
-
-
由 Brian Gix 提交于
Some MITM scenarios require handling of the User Passkey Request event, by querying the user, and passing the response back. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 17 11月, 2011 2 次提交
-
-
由 Andre Guedes 提交于
This patches creates mgmt_stop_discovery_failed() which removes pending MGMT_OP_STOP_DISCOVERY commands and sends proper command status events. This patch also fixes the MGMT_OP_STOP_DISCOVERY command leak in case cancel inquiry fails. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch renames the function mgmt_inquiry_failed() to mgmt_start_discovery_failed(). This function is more related to MGMT_OP_START_DISCOVERY command handling than to inquiry. Besides, this functions will be reused by LE based discovery procedures in case of failure. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 11 11月, 2011 2 次提交
-
-
由 Johan Hedberg 提交于
Since disconnecting may fail the status needs to be communicated to user space. This also updates the implementation to match the latest mgmt API specification. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
It's necessary to know the distinction between public and random LE addresses so the mgmt interface also needs to distinguish between them. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 09 11月, 2011 2 次提交
-
-
由 Johan Hedberg 提交于
Now that the pending commands are within struct hci_dev we can properly control access to them throught the hci_dev locking mechanism. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The current global pending command list in mgmt.c is racy. Possibly the simplest way to fix it is to have per-hci dev lists instead of a global one (all commands that need a pending struct are hci_dev specific). This way the list can be protected using the already existing per-hci dev lock. To enable this refactoring the first thing that needs to be done is to ensure that the mgmt functions have access to the hci_dev struct (instead of just the dev id). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 08 11月, 2011 7 次提交
-
-
由 Johan Hedberg 提交于
This patch adds address type info (typically BR/EDR vs LE) to management messages that need this. This also ensures conformance to the latest management API specification. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
A proper mgmt_command_status should be returned to user-space if either discoverable or connectable enabling fails. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Based on the revised mgmt API set_discoverable has a timeout parameter to specify how long the adapter will remain discoverable. A value of 0 means "indefinitively". Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
By using periodic inquiry command we're not able to detect correctly when the controller has started inquiry. Today we have this workaround in inquiry result event handler to set the HCI_INQUIRY flag when it sees the first inquiry result event. This workaround isn't enough because the device may be performing an inquiry but the HCI_INQUIRY flag is not set. For instance, if there is no device in range, no inquiry result event is generated, consequently, the HCI_INQUIRY flags isn't set when it should so. We rely on HCI_INQUIRY flag to implement the discovery procedure properly. So, as we aren't able to clear/set the HCI_INQUIRY flag in a reliable manner, periodic inquiry events shouldn't change the HCI_INQUIRY flag. Thus, due to that issue and in order to keep compatibility with userspace, periodic inquiry events shouldn't send mgmt discovering events. In future, we might track if periodic inquiry is enabled or not. By tracking this state we'll be able to do some improvements in Discovery such as failing MGMT_OP_START_DISCOVERY command in case periodic inquiry is on. We can also send no mgmt_device_found event if periodic inquiry is on. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Use HCI error reasons instead of magic numbers. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a new label to hci_cc_write_scan_enable to avoid unnecessary indentation. This will be convenient especially when new code for the discoverable timeout gets added. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds the necessary code to send proper command status or command complete events to the start/stop discovery management commands. Before this patch these events were completely missing. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 10月, 2011 1 次提交
-
-
由 Andrei Emeltchenko 提交于
Implementation of Read Local AMP Info Command Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 12 10月, 2011 1 次提交
-
-
由 Gustavo F. Padovan 提交于
With 0444 it is impossible to change the param, changing it to 0644. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 30 9月, 2011 2 次提交
-
-
由 Andre Guedes 提交于
There is no reason to treat the first advertising entry differently from the potential other ones. Besides, the current implementation can easily leads to typos. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
Checking conn->pending_sec_level if there is no connection leads to potential null pointer dereference. Don't process pin_code_request_event at all if no connection exists. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 21 9月, 2011 3 次提交
-
-
由 Andre Guedes 提交于
This patch reduces the critial region (protected by hdev->lock) in hci_cc_le_set_scan_enable(). This way, only really required code is synchronized. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
The HIGH security level requires a 16 digit pin code for non-SSP bondings. Sometimes this requirement is not acceptable and we still want protection againts MITM attacks (which is something that the MEDIUM security level doesn't provide), for that we should allow another way to request authentication without using the HIGH security level. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
One piece of information that was lost when using the mgmt interface, was the type of the connection. Using HCI events we used to know the type of the connection based on the type of the event, e.g. HCI_LE_Connection_Complete for LE links. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 15 9月, 2011 1 次提交
-
-
由 Oliver Neukum 提交于
The checks for HCI_INQUIRY and HCI_MGMT were in the wrong order, so that second scans always failed. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 09 7月, 2011 2 次提交
-
-
由 Vinicius Costa Gomes 提交于
In some cases it will be useful having the key size used for encrypting the link. For example, some profiles may restrict some operations depending on the key length. The key size is stored in the key that is passed to userspace using the pin_length field in the key structure. For now this field is only valid for LE controllers. 3.0+HS controllers define the Read Encryption Key Size command, this field is intended for storing the value returned by that command. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
Now that we have methods to finding keys by its parameters we can reject an encryption request if the key isn't found. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 07 7月, 2011 3 次提交
-
-
由 Andre Guedes 提交于
This patch adds a new module parameter to enable/disable host LE support. By default host LE support is disabled. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch adds a handler to Write LE Host Supported command complete events. Once this commands has completed successfully, we should read the extended LMP features and update the extfeatures field in hci_dev. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This new field holds the extended LMP features value. Some LE mechanism such as discovery procedure needs to read the extended LMP features to work properly. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 6月, 2011 2 次提交
-
-
由 Vinicius Costa Gomes 提交于
This patch implements a simple version of the SMP Pairing Features exchange procedure (Vol. 3 Part H, Section 2.3.5.1). For now, everything that would cause a Pairing Method different of Just Works to be chosen is rejected. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
As the default security level (BT_SECURITY_SDP) doesn't make sense for LE links, initialize LE links with something that makes sense. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-