Avoid accidental wrong builds, due to built-in rules working just a little
bit too well--but not quite as well as required for our situation here.

In other words, "make userfaultfd" (for example) is supposed to fail to
build at all, because this Makefile only supports either "make" (all), or
"make /full/path".  However, the built-in rules, if not suppressed, will
pick up CFLAGS and the initial LDLIBS (but not the target-specific LDLIBS,
because those are only set for the full path target!).  This causes it to
get pretty far into building things despite using incorrect values such as
an *occasionally* incomplete LDLIBS value.
Signed-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: https://lkml.kernel.org/r/20200915012901.1655280-3-jhubbard@nvidia.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "selftests/vm: fix some minor aggravating factors in the Makefile".

This fixes a couple of minor aggravating factors that I ran across while
trying to do some changes in selftests/vm.  These are simple things, but
like most things with GNU Make, it's rarely obvious what's wrong until you
understand *the entire Makefile and all of its includes*.

So while there is, of course, joy in learning those details, I thought I'd
fix these little things, so as to allow others to skip out on the Joy if
they so choose.  :)

First of all, if you have an item (let's choose userfaultfd for an
example) that fails to build, you might do this:

$ make -j32

    # ...you observe a failed item in the threaded output

# OK, let's get a closer look

$ make
    # ...but now the build quietly "succeeds".

That's what Patch 0001 fixes.

Second, if you instead attempt this approach for your closer look (a casual
mistake, as it's not supported):

$ make userfaultfd

    # ...userfaultfd fails to link, due to incomplete LDLIBS

That's what Patch 0002 fixes.

This patch (of 2):

If one or more of these selftest fail to build, then after the first
failure, subsequent invocations of "make" will make it appear that there
are no build failures, after all.

That's because the failed build products remain, with up-to-date
timestamps, thus tricking Make (and you!) into believing that there's
nothing else to build.

Fix this by telling Make to delete targets that didn't completely
succeed.
Signed-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: https://lkml.kernel.org/r/20200915012901.1655280-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20200915012901.1655280-2-jhubbard@nvidia.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages are
never handled.  Fix this by checking for non_swap_entry() after handling
device private swap PTEs.

I assume the memory cgroup accounting would be off somehow when moving
a process to another memory cgroup.  Currently, the device private page
is charged like a normal anonymous page when allocated and is uncharged
when the page is freed so I think that path is OK.
Signed-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lkml.kernel.org/r/20201009215952.2726-1-rcampbell@nvidia.com
xFixes: c733a828 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Object cgroup charging is done for all the objects during allocation, but
during freeing, uncharging ends up happening for only one object in the
case of bulk allocation/freeing.

Fix this by having a separate call to uncharge all the objects from
kmem_cache_free_bulk() and by modifying memcg_slab_free_hook() to take
care of bulk uncharging.

Fixes: 964d4bd3 ("mm: memcg/slab: save obj_cgroup for non-root slab objects"
Signed-off-by: NBharata B Rao <bharata@linux.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NRoman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201009060423.390479-1-bharata@linux.ibm.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 79dfdacc ("memcg: make oom_lock 0 and 1 based rather than
counter"), the mem_cgroup_unmark_under_oom() is added and the comment of
the mem_cgroup_oom_unlock() is moved here.  But this comment make no sense
here because mem_cgroup_oom_lock() does not operate on under_oom field.
So we reword the comment as this would be helpful.  [Thanks Michal Hocko
for rewording this comment.]
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: https://lkml.kernel.org/r/20200930095336.21323-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit bbec2e15 ("mm: rename page_counter's count/limit into
usage/max"), page_counter_limit() is renamed to page_counter_set_max().
So replace page_counter_limit with page_counter_set_max in comment.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20200917113629.14382-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the cgroup v1, we have a numa_stat interface.  This is useful for
providing visibility into the numa locality information within an memcg
since the pages are allowed to be allocated from any physical node.  One
of the use cases is evaluating application performance by combining this
information with the application's CPU allocation.  But the cgroup v2 does
not.  So this patch adds the missing information.
Suggested-by: NShakeel Butt <shakeelb@google.com>
Signed-off-by: NMuchun Song <songmuchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20200916100030.71698-2-songmuchun@bytedance.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The swap page counter is v2 only while memsw is v1 only.  As v1 and v2
controllers cannot be active at the same time, there is no point to keep
both swap and memsw page counters in mem_cgroup.  The previous patch has
made sure that memsw page counter is updated and accessed only when in v1
code paths.  So it is now safe to alias the v1 memsw page counter to v2
swap page counter.  This saves 14 long's in the size of mem_cgroup.  This
is a saving of 112 bytes for 64-bit archs.

While at it, also document which page counters are used in v1 and/or v2.
Signed-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200914024452.19167-4-longman@redhat.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_get_max() used to get memory+swap max from both the v1 memsw
and v2 memory+swap page counters & return the maximum of these 2 values.
This is redundant and it is more efficient to just get either the v1 or
the v2 values depending on which one is currently in use.

[longman@redhat.com: v4]
  Link: https://lkml.kernel.org/r/20200914150928.7841-1-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200914024452.19167-3-longman@redhat.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/memcg: Miscellaneous cleanups and streamlining", v2.

This patch (of 3):

Since commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API") and
commit 00501b53 ("mm: memcontrol: rewrite charge API") in v3.17, the
enum charge_type was no longer used anywhere.  However, the enum itself
was not removed at that time.  Remove the obsolete enum charge_type now.
Signed-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NChris Down <chris@chrisdown.name>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200914024452.19167-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20200914024452.19167-2-longman@redhat.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit bbec2e15 ("mm: rename page_counter's count/limit into
usage/max"), the arg @reclaim has no priority field anymore.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: https://lkml.kernel.org/r/20200913094129.44558-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_from_obj() checks the lowest bit of the page->mem_cgroup
pointer to determine if the page has an attached obj_cgroup vector instead
of a regular memcg pointer.  If it's not set, it simple returns the
page->mem_cgroup value as a struct mem_cgroup pointer.

The commit 10befea9 ("mm: memcg/slab: use a single set of kmem_caches
for all allocations") changed the moment when this bit is set: if
previously it was set on the allocation of the slab page, now it can be
set well after, when the first accounted object is allocated on this page.

It opened a race: if page->mem_cgroup is set concurrently after the first
page_has_obj_cgroups(page) check, a pointer to the obj_cgroups array can
be returned as a memory cgroup pointer.

A simple check for page->mem_cgroup pointer for NULL before the
page_has_obj_cgroups() check fixes the race.  Indeed, if the pointer is
not NULL, it's either a simple mem_cgroup pointer or a pointer to
obj_cgroup vector.  The pointer can be asynchronously changed from NULL to
(obj_cgroup_vec | 0x1UL), but can't be changed from a valid memcg pointer
to objcg vector or back.

If the object passed to mem_cgroup_from_obj() is a slab object and
page->mem_cgroup is NULL, it means that the object is not accounted, so
the function must return NULL.

I've discovered the race looking at the code, so far I haven't seen it in
the wild.

Fixes: 10befea9 ("mm: memcg/slab: use a single set of kmem_caches for all allocations")
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200910022435.2773735-1-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the preferred form for passing the size of a structure type.  The
alternative form where the structure type is spelled out hurts readability
and introduces an opportunity for a bug when the object type is changed
but the corresponding object identifier to which the sizeof operator is
applied is not.
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: https://lkml.kernel.org/r/773e013ff2f07fe2a0b47153f14dea054c0c04f1.1596214831.git.gustavoars@kernel.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make use of the flex_array_size() helper to calculate the size of a
flexible array member within an enclosing structure.

This helper offers defense-in-depth against potential integer overflows,
while at the same time makes it explicitly clear that we are dealing with
a flexible array member.

Also, remove unnecessary braces.
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: https://lkml.kernel.org/r/ddd60dae2d9aea1ccdd2be66634815c93696125e.1596214831.git.gustavoars@kernel.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While reviewing Protection Key Supervisor support it was pointed out that
using a counter to track static branch enable was an anti-pattern which
was better solved using the provided static_branch_{inc,dec} functions.[1]

Fix up devmap_managed_key to work the same way.  Also this should be safer
because there is a very small (very unlikely) race when multiple callers
try to enable at the same time.

[1] https://lore.kernel.org/lkml/20200714194031.GI5523@worktop.programming.kicks-ass.net/Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NWilliam Kucharski <william.kucharski@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lkml.kernel.org/r/20200810235319.2796597-1-ira.weiny@intel.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we failed to drain inode, we would forget to free the swap address
space allocated by init_swap_address_space() above.

Fixes: dc617f29 ("vfs: don't allow writes to swap files")
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Link: https://lkml.kernel.org/r/20200930101803.53884-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's unnecessary to goto the out label while out label is just below.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200930102549.1885-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 9c4e6b1a ("mm, mlock, vmscan: no more skipping
pagevecs"), unevictable pages do not goes directly back onto zone's
unevictable list.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Shakeel Butt <shakeelb@google.com>
Link: https://lkml.kernel.org/r/20200927122209.59328-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The out label is only used in one place and return ret directly without
something like resource cleanup or lock release and so on.  So we should
remove this jump label and do some cleanup.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200927124032.22521-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

enable_swap_slots_cache() always return zero and its return value is just
ignored by the caller.  So make enable_swap_slots_cache() void.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200924113554.50614-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 07d80269 ("mm: devmap: refactor 1-based refcounting for
ZONE_DEVICE pages"), we have renamed the func put_devmap_managed_page() to
page_is_devmap_managed().
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: https://lkml.kernel.org/r/20200905084453.19353-1-linmiaohe@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To activate a page, mark_page_accessed() always holds a reference on it.
It either gets a new reference when adding a page to
lru_pvecs.activate_page or reuses an existing one it previously got when
it added a page to lru_pvecs.lru_add.  So it doesn't call SetPageActive()
on a page that doesn't have any reference left.  Therefore, the race is
impossible these days (I didn't brother to dig into its history).

For other paths, namely reclaim and migration, a reference count is always
held while calling SetPageActive() on a page.

SetPageSlabPfmemalloc() also uses SetPageActive(), but it's irrelevant to
LRU pages.
Signed-off-by: NYu Zhao <yuzhao@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NYang Shi <shy828301@gmail.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200818184704.3625199-2-yuzhao@google.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't initially add anon pages to active lruvec after commit
b518154e ("mm/vmscan: protect the workingset on anonymous LRU").
Remove activate_page() from unuse_pte(), which seems to be missed by the
commit.  And make the function static while we are at it.

Before the commit, we called lru_cache_add_active_or_unevictable() to add
new ksm pages to active lruvec.  Therefore, activate_page() wasn't
necessary for them in the first place.
Signed-off-by: NYu Zhao <yuzhao@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NYang Shi <shy828301@gmail.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200818184704.3625199-1-yuzhao@google.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SWP_FS is used to make swap_{read,write}page() go through the filesystem,
and it's only used for swap files over NFS for now.  Otherwise it will
directly submit IO to blockdev according to swapfile extents reported by
filesystems in advance.

As Matthew pointed out [1], SWP_FS naming is somewhat confusing, so let's
rename to SWP_FS_OPS.

[1] https://lore.kernel.org/r/20200820113448.GM17456@casper.infradead.orgSuggested-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NGao Xiang <hsiangkao@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200822113019.11319-1-hsiangkao@redhat.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As suggested by Dan Carpenter, fortify unpin_user_pages() just a bit,
against a typical caller mistake: check if the npages arg is really a
-ERRNO value, which would blow up the unpinning loop: WARN and return.

If this new WARN_ON() fires, then the system *might* be leaking pages (by
leaving them pinned), but probably not.  More likely, gup/pup returned a
hard -ERRNO error to the caller, who erroneously passed it here.
Signed-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lkml.kernel.org/r/20200917065706.409079-1-jhubbard@nvidia.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gup prohibits users from calling get_user_pages() with FOLL_PIN.  But it
allows users to call get_user_pages() with FOLL_LONGTERM only.  It seems
insensible.

Since FOLL_LONGTERM is a stricter case of FOLL_PIN, we should prohibit
users from calling get_user_pages() with FOLL_LONGTERM while not with
FOLL_PIN.

mm/gup_benchmark.c used to be the only user who did this improperly.
But it has been fixed by moving to use pin_user_pages().

[akpm@linux-foundation.org: fix CONFIG_MMU=n build]
  Link: https://lkml.kernel.org/r/CA+G9fYuNS3k0DVT62twfV746pfNhCSrk5sVMcOcQ1PGGnEseyw@mail.gmail.comSigned-off-by: NBarry Song <song.bao.hua@hisilicon.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: http://lkml.kernel.org/r/20200819110100.23504-1-song.bao.hua@hisilicon.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to Documentation/core-api/pin_user_pages.rst, FOLL_PIN is a
prerequisite to FOLL_LONGTERM.  Another way of saying that is,
FOLL_LONGTERM is a specific case, more restrictive case of FOLL_PIN.

Almost all kernel modules are using pin_user_pages() with FOLL_LONGTERM,
mm/gup_benchmark.c seems to the only exception in which FOLL_PIN is not a
prerequisite to FOLL_LONGTERM.
Signed-off-by: NBarry Song <song.bao.hua@hisilicon.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200815122056.29508-1-song.bao.hua@hisilicon.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the beginning, mm/gup_benchmark.c supported get_user_pages_fast() only,
but right now, it supports the benchmarking of a couple of
get_user_pages() related calls like:

* get_user_pages_fast()
* get_user_pages()
* pin_user_pages_fast()
* pin_user_pages()

The documentation is confusing and needs update.
Signed-off-by: NBarry Song <song.bao.hua@hisilicon.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20200821032546.19992-1-song.bao.hua@hisilicon.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Our users reported that there're some random latency spikes when their RT
process is running.  Finally we found that latency spike is caused by
FADV_DONTNEED.  Which may call lru_add_drain_all() to drain LRU cache on
remote CPUs, and then waits the per-cpu work to complete.  The wait time
is uncertain, which may be tens millisecond.

That behavior is unreasonable, because this process is bound to a specific
CPU and the file is only accessed by itself, IOW, there should be no
pagecache pages on a per-cpu pagevec of a remote CPU.  That unreasonable
behavior is partially caused by the wrong comparation of the number of
invalidated pages and the number of the target.  For example,

        if (count < (end_index - start_index + 1))

The count above is how many pages were invalidated in the local CPU, and
(end_index - start_index + 1) is how many pages should be invalidated.
The usage of (end_index - start_index + 1) is incorrect, because they are
virtual addresses, which may not mapped to pages.  Besides that, there may
be holes between start and end.  So we'd better check whether there are
still pages on per-cpu pagevec after drain the local cpu, and then decide
whether or not to call lru_add_drain_all().

After I applied it with a hotfix to our production environment, most of
the lru_add_drain_all() can be avoided.
Suggested-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20200923133318.14373-1-laoar.shao@gmail.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We dereference page->mapping and page->index directly after calling
find_subpage() and these fields are not valid for tail pages.  While
commit 4101196b ("mm: page cache: store only head pages in i_pages")
introduced the call to find_subpage(), the problem existed prior to this;
I'm going to suggest all the way back to when THPs first existed.

The user-visible effects of this are almost negligible.  To hit it, you
have to mmap a tmpfs file at an unaligned address and then it's only a
disabled optimisation causing page faults to happen more frequently than
they otherwise would.

Fix this by keeping both head and page pointers and checking the
appropriate one.  We could use page_mapping() and page_to_index(), but
that's higher overhead.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200911012532.24761-1-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a new FGP_HEAD flag which avoids calling find_subpage() and add a
convenience wrapper for it.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-9-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert shmem_getpage_gfp() (the only remaining caller of
find_lock_entry()) to cope with a head page being returned instead of
the subpage for the index.

[willy@infradead.org: fix BUG()s]
  Link https://lore.kernel.org/linux-mm/20200912032042.GA6583@casper.infradead.org/Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-8-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are only four callers remaining of find_get_entry().
get_shadow_from_swap_cache() only wants to see shadow entries and doesn't
care about which page is returned.  Push the find_subpage() call into
find_lock_entry(), find_get_incore_page() and pagecache_get_page().

[willy@infradead.org: fix oops]
  Link: https://lkml.kernel.org/r/20200914112738.GM6583@casper.infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-7-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i915 does not want to see value entries.  Switch it to use
find_lock_page() instead, and remove the export of find_lock_entry().
Move find_lock_entry() and find_get_entry() to mm/internal.h to discourage
any future use.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-6-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid bumping the refcount on pages when we're only interested in the
swap entries.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-5-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of calling find_get_entry() for every page index, use an XArray
iterator to skip over NULL entries, and avoid calling get_page(),
because we only want the swap entries.

[willy@infradead.org: fix LTP soft lockups]
  Link: https://lkml.kernel.org/r/20200914165032.GS6583@casper.infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Qian Cai <cai@redhat.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-4-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current code does not protect against swapoff of the underlying
swap device, so this is a bug fix as well as a worthwhile reduction in
code complexity.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-3-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "Return head pages from find_*_entry", v2.

This patch series started out as part of the THP patch set, but it has
some nice effects along the way and it seems worth splitting it out and
submitting separately.

Currently find_get_entry() and find_lock_entry() return the page
corresponding to the requested index, but the first thing most callers do
is find the head page, which we just threw away.  As part of auditing all
the callers, I found some misuses of the APIs and some plain
inefficiencies that I've fixed.

The diffstat is unflattering, but I added more kernel-doc and a new wrapper.

This patch (of 8);

Provide this functionality from the swap cache.  It's useful for
more than just mincore().
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20200910183318.20139-2-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename head_pincount() --> head_compound_pincount().  These names are more
accurate (or less misleading) than the original ones.
Signed-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200807183358.105097-1-jhubbard@nvidia.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__dump_page() checks i_dentry is fetchable and i_ino is earlier in the
struct than i_ino, so it ought to work fine, but it's possible that struct
randomisation has reordered i_ino after i_dentry and the pointer is just
wild enough that i_dentry is fetchable and i_ino isn't.

Also print the inode number if the dentry is invalid.
Reported-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200819185710.28180-1-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>