Separate Kconfig/Makefile glue from dream into subdirectory. I plan to
add few more drivers, and changing staging/Makefile each time sounds
like inviting conflicts.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the Hyper-V virtual bus to the kernel build system.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This provides Makefile/Kconfig glue for HTC Dream staging parts.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Cc: Brian Swetland <swetland@google.com>
Cc: Iliyan Malchev <ibm@android.com>
Cc: San Mehat <san@android.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch is of the "works as far as it goes" variety, in that the
module compiles and loads, the device nodes are registered and the unit
switched on, but nothing actually works. On the other hand, it doesn't
panic the kernel, as far as I know.
Signed-off-by: NRichard Ash <richard@audacityteam.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Integrate drivers/staging/vt6656 into build system.
Signed-off-by: NForest Bond <forest@alittletooquiet.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the vendor driver for the Ralink RT3090 chipset.

It should be later cleaned and ported to use the existing rt2x00
infrastructure or just replaced by the proper version.

[ Unfortunately since it follows the same design/implementation like
  rt{286,287,307}0 drivers (already present in the staging tree)
  it is highly unlikely that it will see much love from the wireless
  development community.. ]

However since the development of the cleaner/proper version can take
significant time lets give distros (i.e. openSUSE seems to already
have the package with the original vendor driver) and users "something"
to use in the meantime.

I forward ported it to 2.6.31-rc1, ported to the Linux build system
and did some initial cleanups.  More fixes/cleanups to come later
(it seems that the driver can be made to share most of its code with
the other Ralink drivers already present in the staging tree).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver is not needed, as the existing mos7840 driver works
properly for this device.

Thanks to Russell Lang for doing the work to figure this out.

Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the udlfb driver to the build system

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cc: Kevin Huang  <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver from Realtek for the Realtek RTL8192 USB wifi device

Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and
others.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the cpc-usb driver to the kernel build

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Integrate drivers/staging/vt6655 into build system.
Signed-off-by: NForest Bond <forest@alittletooquiet.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui
ports present on the Cavium OCTEON family of SOCs.  These SOCs are
multi-core mips64 processors with existing support over in arch/mips.

The driver files can be categorized into three basic groups:

1) Register definitions, these are named cvmx-*-defs.h

2) Main driver code, these have names that don't start cvmx-.

3) Interface specific functions and other utility code, names starting
with cvmx-
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add kernel modesetting support to radeon driver, use the ttm memory
manager to manage memory and DRM/GEM to provide userspace API.
In order to avoid backward compatibility issue and to allow clean
design and code the radeon kernel modesetting use different code path
than old radeon/drm driver.

When kernel modesetting is enabled the IOCTL of radeon/drm
driver are considered as invalid and an error message is printed
in the log and they return failure.

KMS enabled userspace will use new API to talk with the radeon/drm
driver. The new API provide functions to create/destroy/share/mmap
buffer object which are then managed by the kernel memory manager
(here TTM). In order to submit command to the GPU the userspace
provide a buffer holding the command stream, along this buffer
userspace have to provide a list of buffer object used by the
command stream. The kernel radeon driver will then place buffer
in GPU accessible memory and will update command stream to reflect
the position of the different buffers.

The kernel will also perform security check on command stream
provided by the user, we want to catch and forbid any illegal use
of the GPU such as DMA into random system memory or into memory
not owned by the process supplying the command stream. This part
of the code is still incomplete and this why we propose that patch
as a staging driver addition, future security might forbid current
experimental userspace to run.

This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX
(radeon up to X1950). Works is underway to provide support for R6XX,
R7XX and newer hardware (radeon from HD2XXX to HD4XXX).

Authors:
    Jerome Glisse <jglisse@redhat.com>
    Dave Airlie <airlied@redhat.com>
    Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add support for all Quatech usb to serial devices.

Based on an original driver from Quatech.

Cleaned up and forward ported by me.

It's a mess, uses it's own tty layer interface, and the coding style is
horrible.

Cc: Tim Gobeli <tgobeli@quatech.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the line6 driver to the build system.

Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the Ralink RT3070 driver from the company that does horrible
things like reading a config file from /etc.  However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).

So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.

Ported to the Linux build system, fixed lots of build issues, forward
ported to the current kernel version, and other minor cleanups were all
done by me.

Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Intel Management Engine Interface (aka HECI: Host Embedded
Controller Interface ) enables communication between the host OS and
the Management Engine firmware. MEI is bi-directional, and either the
host or Intel AMT firmware can initiate transactions.

The core hardware architecture of Intel Active Management Technology
(Intel AMT) is resident in firmware. The micro-controller within the
chipset's graphics and memory controller (GMCH) hub houses the
Management Engine (ME) firmware, which implements various services
on behalf of management applications.

Some of the ME subsystems that can be access via MEI driver:

- Intel(R) Quiet System Technology (QST) is implemented as a firmware
subsystem  that  runs in the ME.  Programs that wish to expose the
health monitoring and fan speed control capabilities of Intel(R) QST
will need to use the MEI driver to communicate with the ME sub-system.
- ASF is the "Alert Standard Format" which is an DMTF manageability
standard. It is implemented in the PC's hardware and firmware, and is
managed from a remote console.

Most recent Intel desktop chipsets have one or more of the above ME
services. The MEI driver will make it possible to support the above
features on Linux and provides applications access to the ME and it's
features.
Signed-off-by: NAnas Nashif <anas.nashif@intel.com>
Signed-off-by: NMarcin Obara <marcin.obara@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the p9auth code to the kernel build

Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Basically, update driver to run with 2.6.28
    - Conversion from struct class_device to struct device.
    - Conversion from .nopfn to .fault in vm_operations_struct.
    - Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN.
    - Update use of pci_dma_mapping_error.
- Minor code cleanup and integration with kernel build system.
Signed-off-by: NJustin Bronder <jsbronder@brontes3d.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Many thanks to Russell Lang <gsview@ghostgum.com.au> for his
help in getting this working on newer kernel versions and
for pointing out this driver in the first place.

Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds a new driver called stlc45xx, which supports wi-fi chipsets
stlc4550 and stlc4560 from ST-NXP Wireless. The chipset can be found, for
example, from Nokia N800 and N810 products.

The driver is implemented based on the firmware interface information
published by ST-NXP Wireless here:

http://wireless.kernel.org/en/developers/Documentation/specs#STMicroelectronicshardware

Currently only SPI interface is supported.
Signed-off-by: NKalle Valo <kalle.valo@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds Kconfig and Makefile entries and exports to
VFS functions to be used by POHMELFS.
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NEvgeniy Polaykov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The benet driver is now in the proper place in drivers/net/benet, so we
can remove the staging version.
Acked-by: NSathya Perla <sathyap@serverengines.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This prepares us to start adding the android drivers
to the build.

The dummy android.c file will go away in the next few patches, as it
will not be needed once drivers/staging/android/ has a driver in it.

Cc: Robert Love <rlove@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the openPOWERLINK network stack from systec electronic.

It's a bit messed up as there is a driver mixed into the
middle of it, lots of work needs to be done to unwind the
different portions to make it sane.

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adds the tranzport and alphatrack drivers to the staging tree.

Cc: David Taht <d@teklibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the Ralink RT2870 driver from the company that does horrible
things like reading a config file from /etc.  However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).

So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.

Ported to the Linux build system and cleaned up a bit already by me.

Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the Mimio Xi interactive whiteboard driver to the tree.

It was originally written by mwilder@cs.nmsu.edu, but cleaned up and
forward ported by me to the latest kernel version.


Cc: Phil Hannent <phil@hannent.co.uk>
Cc: <mwilder@cs.nmsu.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adds the driver for the Princeton Instruments USB camera.

Needs a lot of work...

TODO:
	- make checkpatch.pl clean
	- coding style fixups (typedefs, etc.)
	- get it to build properly
	- audit ioctls
	- remove ioctls if possible
	- assign proper minor number
	- remove dbg() macro
	- lots of general cleanups
	- review locking

Cc: Judd Montgomery <judd@jpilot.org>
Cc: Jeff Frontz <jeff.frontz@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a driver for the Realtek 8187 "SE" wireless PCI devices in some
netbook computers (MSI Wind, and others).  It includes its own copy of
the ieee80211 stack, but it is compiled into the driver to prevend
duplicate symbol issues.

This version comes from Ralink with no authorship, but it is based
on an old version of the rtl8180 driver from Andrea Merello.  It was
hacked up a bit to get it to build properly within the kernel tree and
to properly handle the merged wireless stack within the driver.

Cc: Andrea Merello <andreamrl@tiscali.it>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Altera PCI Express Chaining DMA driver

A reference driver that exercises the Chaining DMA logic reference
design generated along the Altera FPGA PCI Express soft or hard core,
only if instantiated using the MegaWizard, not the SOPC builder, of
Quartus 8.1.

This driver can be used to test the logic instantiation and PCI
Express layers and acts as a starting point for driving custom logic
connected to the PCI Express End Point Chaining DMA engines.
Signed-off-by: NLeon Woestenberg <leon@sidebranch.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the lcd-panel parallel port driver to the staging tree.

See the file, drivers/staging/panel/TODO for what needs to be fixed up
in order for this to be properly merged into the rest of the kernel
tree.

Cc: Willy Tarreau <w@1wt.eu>
Cc: Frank Menne <frank.menne@hsm.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de>
and Krzysztof Gantzke <k.gantzke@meilhaus.de>

This is the drv/lnx/mod directory of ME-IDS 1.2.9 tarball with
some files from drv/lnx/include.
Signed-off-by: NDavid Kiliani <mail@davidkiliani.de>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Cc: Krzysztof Gantzke <k.gantzke@meilhaus.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver for the OLED tiny display on some Asus laptops.

From: Jakub Schmidtke <sjakub@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the Comedi core to the staging tree.
This is a data acquision infrastructure for Linux, providing a common
interface for these types of drivers.

Taken directly from the comedi git tree, with only minor tweaks
by Greg to get it to build properly within the kernel tree.

From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NFrank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>