- 05 4月, 2019 2 次提交
-
-
由 Alexey Kardashevskiy 提交于
Guest physical to user address translation uses KVM memslots and reading these requires holding the kvm->srcu lock. However recently introduced kvmppc_tce_validate() broke the rule (see the lockdep warning below). This moves srcu_read_lock(&vcpu->kvm->srcu) earlier to protect kvmppc_tce_validate() as well. ============================= WARNING: suspicious RCU usage 5.1.0-rc2-le_nv2_aikATfstn1-p1 #380 Not tainted ----------------------------- include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-system-ppc/8020: #0: 0000000094972fe9 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0xdc/0x850 [kvm] stack backtrace: CPU: 44 PID: 8020 Comm: qemu-system-ppc Not tainted 5.1.0-rc2-le_nv2_aikATfstn1-p1 #380 Call Trace: [c000003fece8f740] [c000000000bcc134] dump_stack+0xe8/0x164 (unreliable) [c000003fece8f790] [c000000000181be0] lockdep_rcu_suspicious+0x130/0x170 [c000003fece8f810] [c0000000000d5f50] kvmppc_tce_to_ua+0x280/0x290 [c000003fece8f870] [c00800001a7e2c78] kvmppc_tce_validate+0x80/0x1b0 [kvm] [c000003fece8f8e0] [c00800001a7e3fac] kvmppc_h_put_tce+0x94/0x3e4 [kvm] [c000003fece8f9a0] [c00800001a8baac4] kvmppc_pseries_do_hcall+0x30c/0xce0 [kvm_hv] [c000003fece8fa10] [c00800001a8bd89c] kvmppc_vcpu_run_hv+0x694/0xec0 [kvm_hv] [c000003fece8fae0] [c00800001a7d95dc] kvmppc_vcpu_run+0x34/0x48 [kvm] [c000003fece8fb00] [c00800001a7d56bc] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm] [c000003fece8fb90] [c00800001a7c3618] kvm_vcpu_ioctl+0x460/0x850 [kvm] [c000003fece8fd00] [c00000000041c4f4] do_vfs_ioctl+0xe4/0x930 [c000003fece8fdb0] [c00000000041ce04] ksys_ioctl+0xc4/0x110 [c000003fece8fe00] [c00000000041ce78] sys_ioctl+0x28/0x80 [c000003fece8fe20] [c00000000000b5a4] system_call+0x5c/0x70 Fixes: 42de7b9e ("KVM: PPC: Validate TCEs against preregistered memory page sizes", 2018-09-10) Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
-
由 Suraj Jitindar Singh 提交于
There is a hardware bug in some POWER9 processors where a treclaim in fake suspend mode can cause an inconsistency in the XER[SO] bit across the threads of a core, the workaround being to force the core into SMT4 when doing the treclaim. The FAKE_SUSPEND bit (bit 10) in the PSSCR is used to control whether a thread is in fake suspend or real suspend. The important difference here being that thread reconfiguration is blocked in real suspend but not fake suspend mode. When we exit a guest which was in fake suspend mode, we force the core into SMT4 while we do the treclaim in kvmppc_save_tm_hv(). However on the new exit path introduced with the function kvmhv_run_single_vcpu() we restore the host PSSCR before calling kvmppc_save_tm_hv() which means that if we were in fake suspend mode we put the thread into real suspend mode when we clear the PSSCR[FAKE_SUSPEND] bit. This means that we block thread reconfiguration and the thread which is trying to get the core into SMT4 before it can do the treclaim spins forever since it itself is blocking thread reconfiguration. The result is that that core is essentially lost. This results in a trace such as: [ 93.512904] CPU: 7 PID: 13352 Comm: qemu-system-ppc Not tainted 5.0.0 #4 [ 93.512905] NIP: c000000000098a04 LR: c0000000000cc59c CTR: 0000000000000000 [ 93.512908] REGS: c000003fffd2bd70 TRAP: 0100 Not tainted (5.0.0) [ 93.512908] MSR: 9000000302883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE,TM[SE]> CR: 22222444 XER: 00000000 [ 93.512914] CFAR: c000000000098a5c IRQMASK: 3 [ 93.512915] PACATMSCRATCH: 0000000000000001 [ 93.512916] GPR00: 0000000000000001 c000003f6cc1b830 c000000001033100 0000000000000004 [ 93.512928] GPR04: 0000000000000004 0000000000000002 0000000000000004 0000000000000007 [ 93.512930] GPR08: 0000000000000000 0000000000000004 0000000000000000 0000000000000004 [ 93.512932] GPR12: c000203fff7fc000 c000003fffff9500 0000000000000000 0000000000000000 [ 93.512935] GPR16: 2000000000300375 000000000000059f 0000000000000000 0000000000000000 [ 93.512951] GPR20: 0000000000000000 0000000000080053 004000000256f41f c000003f6aa88ef0 [ 93.512953] GPR24: c000003f6aa89100 0000000000000010 0000000000000000 0000000000000000 [ 93.512956] GPR28: c000003f9e9a0800 0000000000000000 0000000000000001 c000203fff7fc000 [ 93.512959] NIP [c000000000098a04] pnv_power9_force_smt4_catch+0x1b4/0x2c0 [ 93.512960] LR [c0000000000cc59c] kvmppc_save_tm_hv+0x40/0x88 [ 93.512960] Call Trace: [ 93.512961] [c000003f6cc1b830] [0000000000080053] 0x80053 (unreliable) [ 93.512965] [c000003f6cc1b8a0] [c00800001e9cb030] kvmhv_p9_guest_entry+0x508/0x6b0 [kvm_hv] [ 93.512967] [c000003f6cc1b940] [c00800001e9cba44] kvmhv_run_single_vcpu+0x2dc/0xb90 [kvm_hv] [ 93.512968] [c000003f6cc1ba10] [c00800001e9cc948] kvmppc_vcpu_run_hv+0x650/0xb90 [kvm_hv] [ 93.512969] [c000003f6cc1bae0] [c00800001e8f620c] kvmppc_vcpu_run+0x34/0x48 [kvm] [ 93.512971] [c000003f6cc1bb00] [c00800001e8f2d4c] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm] [ 93.512972] [c000003f6cc1bb90] [c00800001e8e3918] kvm_vcpu_ioctl+0x460/0x7d0 [kvm] [ 93.512974] [c000003f6cc1bd00] [c0000000003ae2c0] do_vfs_ioctl+0xe0/0x8e0 [ 93.512975] [c000003f6cc1bdb0] [c0000000003aeb24] ksys_ioctl+0x64/0xe0 [ 93.512978] [c000003f6cc1be00] [c0000000003aebc8] sys_ioctl+0x28/0x80 [ 93.512981] [c000003f6cc1be20] [c00000000000b3a4] system_call+0x5c/0x70 [ 93.512983] Instruction dump: [ 93.512986] 419dffbc e98c0000 2e8b0000 38000001 60000000 60000000 60000000 40950068 [ 93.512993] 392bffff 39400000 79290020 39290001 <7d2903a6> 60000000 60000000 7d235214 To fix this we preserve the PSSCR[FAKE_SUSPEND] bit until we call kvmppc_save_tm_hv() which will mean the core can get into SMT4 and perform the treclaim. Note kvmppc_save_tm_hv() clears the PSSCR[FAKE_SUSPEND] bit again so there is no need to explicitly do that. Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
-
- 21 3月, 2019 1 次提交
-
-
由 Michael Ellerman 提交于
When I updated the spectre_v2 reporting to handle software count cache flush I got the logic wrong when there's no software count cache enabled at all. The result is that on systems with the software count cache flush disabled we print: Mitigation: Indirect branch cache disabled, Software count cache flush Which correctly indicates that the count cache is disabled, but incorrectly says the software count cache flush is enabled. The root of the problem is that we are trying to handle all combinations of options. But we know now that we only expect to see the software count cache flush enabled if the other options are false. So split the two cases, which simplifies the logic and fixes the bug. We were also missing a space before "(hardware accelerated)". The result is we see one of: Mitigation: Indirect branch serialisation (kernel only) Mitigation: Indirect branch cache disabled Mitigation: Software count cache flush Mitigation: Software count cache flush (hardware accelerated) Fixes: ee13cb24 ("powerpc/64s: Add support for software count cache flush") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NMichael Neuling <mikey@neuling.org> Reviewed-by: NDiana Craciun <diana.craciun@nxp.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 20 3月, 2019 1 次提交
-
-
由 Ben Hutchings 提交于
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is enabled, and that was the case before commit 4ffe713b ("powerpc/mm: Increase the max addressable memory to 2PB"). On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now define it as 46. That is larger than the real number of physical address bits, and breaks calculations in zsmalloc: mm/zsmalloc.c:130:49: warning: right shift count is negative MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ^~ ... mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope struct size_class *size_class[ZS_SIZE_CLASSES]; ^~~~~~~~~~ Fixes: 4ffe713b ("powerpc/mm: Increase the max addressable memory to 2PB") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 18 3月, 2019 2 次提交
-
-
由 Christophe Leroy 提交于
Not only the 603 but all 6xx need SPRN_SPRG_PGDIR to be initialised at startup. This patch move it from __setup_cpu_603() to start_here() and __secondary_start(), close to the initialisation of SPRN_THREAD. Previously, virt addr of PGDIR was retrieved from thread struct. Now that it is the phys addr which is stored in SPRN_SPRG_PGDIR, hash_page() shall not convert it to phys anymore. This patch removes the conversion. Fixes: 93c4a162 ("powerpc/6xx: Store PGDIR physical address in a SPRG") Reported-by: NGuenter Roeck <linux@roeck-us.net> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
Jakub Drnec reported: Setting the realtime clock can sometimes make the monotonic clock go back by over a hundred years. Decreasing the realtime clock across the y2k38 threshold is one reliable way to reproduce. Allegedly this can also happen just by running ntpd, I have not managed to reproduce that other than booting with rtc at >2038 and then running ntp. When this happens, anything with timers (e.g. openjdk) breaks rather badly. And included a test case (slightly edited for brevity): #define _POSIX_C_SOURCE 199309L #include <stdio.h> #include <time.h> #include <stdlib.h> #include <unistd.h> long get_time(void) { struct timespec tp; clock_gettime(CLOCK_MONOTONIC, &tp); return tp.tv_sec + tp.tv_nsec / 1000000000; } int main(void) { long last = get_time(); while(1) { long now = get_time(); if (now < last) { printf("clock went backwards by %ld seconds!\n", last - now); } last = now; sleep(1); } return 0; } Which when run concurrently with: # date -s 2040-1-1 # date -s 2037-1-1 Will detect the clock going backward. The root cause is that wtom_clock_sec in struct vdso_data is only a 32-bit signed value, even though we set its value to be equal to tk->wall_to_monotonic.tv_sec which is 64-bits. Because the monotonic clock starts at zero when the system boots the wall_to_montonic.tv_sec offset is negative for current and future dates. Currently on a freshly booted system the offset will be in the vicinity of negative 1.5 billion seconds. However if the wall clock is set past the Y2038 boundary, the offset from wall to monotonic becomes less than negative 2^31, and no longer fits in 32-bits. When that value is assigned to wtom_clock_sec it is truncated and becomes positive, causing the VDSO assembly code to calculate CLOCK_MONOTONIC incorrectly. That causes CLOCK_MONOTONIC to jump ahead by ~4 billion seconds which it is not meant to do. Worse, if the time is then set back before the Y2038 boundary CLOCK_MONOTONIC will jump backward. We can fix it simply by storing the full 64-bit offset in the vdso_data, and using that in the VDSO assembly code. We also shuffle some of the fields in vdso_data to avoid creating a hole. The original commit that added the CLOCK_MONOTONIC support to the VDSO did actually use a 64-bit value for wtom_clock_sec, see commit a7f290da ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") (Nov 2005). However just 3 days later it was converted to 32-bits in commit 0c37ec2a ("[PATCH] powerpc: vdso fixes (take #2)"), and the bug has existed since then AFAICS. Fixes: 0c37ec2a ("[PATCH] powerpc: vdso fixes (take #2)") Cc: stable@vger.kernel.org # v2.6.15+ Link: http://lkml.kernel.org/r/HaC.ZfES.62bwlnvAvMP.1STMMj@seznam.czReported-by: NJakub Drnec <jaydee@email.cz> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 17 3月, 2019 2 次提交
-
-
由 Masahiro Yamada 提交于
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 13 3月, 2019 7 次提交
-
-
由 Mathieu Malaterre 提交于
Make sure to include <asm/nmi.h> to provide the following prototype: hv_nmi_check_nonrecoverable. Remove the following warning treated as error (W=1): arch/powerpc/kernel/traps.c:393:6: error: no previous prototype for 'hv_nmi_check_nonrecoverable' Fixes: ccd47702 ("powerpc/64s: Fix HV NMI vs HV interrupt recoverability test") Signed-off-by: NMathieu Malaterre <malat@debian.org> Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Alexey Kardashevskiy 提交于
The functions returns s64 but the return statement is missing. This adds the missing return statement. Fixes: 75d9fc7f ("powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C") Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Mike Rapoport 提交于
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter and panics if the allocation fails. Replace its usage with memblock_phys_alloc_range() and make the callers check the return value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-10-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Make the memblock_phys_alloc() function an inline wrapper for memblock_phys_alloc_range() and update the memblock_phys_alloc() callers to check the returned value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-8-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The memblock_phys_alloc_try_nid() function tries to allocate memory from the requested node and then falls back to allocation from any node in the system. The memblock_alloc_base() fallback used by this function panics if the allocation fails. Replace the memblock_alloc_base() fallback with the direct call to memblock_alloc_range_nid() and update the memblock_phys_alloc_try_nid() callers to check the returned value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-7-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christophe Leroy 提交于
Since only the virtual address of allocated blocks is used, lets use functions returning directly virtual address. Those functions have the advantage of also zeroing the block. [rppt@linux.ibm.com: powerpc: remove duplicated alloc_stack() function] Link: http://lkml.kernel.org/r/20190226064032.GA5873@rapoport-lnx [rppt@linux.ibm.com: updated error message in alloc_stack() to be more verbose] [rppt@linux.ibm.com: convereted several additional call sites ] Link: http://lkml.kernel.org/r/1548057848-15136-3-git-send-email-rppt@linux.ibm.comSigned-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 3月, 2019 1 次提交
-
-
由 Mahesh Salgaonkar 提交于
The kcov instrumentation inside SLB routines causes duplicate SLB entries to be added resulting into SLB multihit machine checks. Disable kcov instrumentation on slb.o Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 08 3月, 2019 3 次提交
-
-
由 Mike Rapoport 提交于
There are several early memory allocations in arch/ code that use memblock_phys_alloc() to allocate memory, convert the returned physical address to the virtual address and then set the allocated memory to zero. Exactly the same behaviour can be achieved simply by calling memblock_alloc(): it allocates the memory in the same way as memblock_phys_alloc(), then it performs the phys_to_virt() conversion and clears the allocated memory. Replace the longer sequence with a simpler call to memblock_alloc(). Link: http://lkml.kernel.org/r/1546248566-14910-6-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Patch series "memblock: simplify several early memory allocation", v4. These patches simplify some of the early memory allocations by replacing usage of older memblock APIs with newer and shinier ones. Quite a few places in the arch/ code allocated memory using a memblock API that returns a physical address of the allocated area, then converted this physical address to a virtual one and then used memset(0) to clear the allocated range. More recent memblock APIs do all the three steps in one call and their usage simplifies the code. It's important to note that regardless of API used, the core allocation is nearly identical for any set of memblock allocators: first it tries to find a free memory with all the constraints specified by the caller and then falls back to the allocation with some or all constraints disabled. The first three patches perform the conversion of call sites that have exact requirements for the node and the possible memory range. The fourth patch is a bit one-off as it simplifies openrisc's implementation of pte_alloc_one_kernel(), and not only the memblock usage. The fifth patch takes care of simpler cases when the allocation can be satisfied with a simple call to memblock_alloc(). The sixth patch removes one-liner wrappers for memblock_alloc on arm and unicore32, as suggested by Christoph. This patch (of 6): There are a several places that allocate memory using memblock APIs that return a physical address, convert the returned address to the virtual address and frequently also memset(0) the allocated range. Update these places to use memblock allocators already returning a virtual address. Use memblock functions that clear the allocated memory instead of calling memset(0) where appropriate. The calls to memblock_alloc_base() that were not followed by memset(0) are replaced with memblock_alloc_try_nid_raw(). Since the latter does not panic() when the allocation fails, the appropriate panic() calls are added to the call sites. Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Greentime Hu <green.hu@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mark Salter <msalter@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Brodkin 提交于
This Kconfig option was removed during v4.19 development in commit 771c0353 ("deprecate the '__deprecated' attribute warnings entirely and for good") so there's no point to keep it in defconfigs any longer. FWIW defconfigs were patched with: --------------------------->8---------------------- find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \; --------------------------->8---------------------- Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.comSigned-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 3月, 2019 7 次提交
-
-
由 Alexey Dobriyan 提交于
Number of NUMA nodes can't be negative. This saves a few bytes on x86_64: add/remove: 0/0 grow/shrink: 4/21 up/down: 27/-265 (-238) Function old new delta hv_synic_alloc.cold 88 110 +22 prealloc_shrinker 260 262 +2 bootstrap 249 251 +2 sched_init_numa 1566 1567 +1 show_slab_objects 778 777 -1 s_show 1201 1200 -1 kmem_cache_init 346 345 -1 __alloc_workqueue_key 1146 1145 -1 mem_cgroup_css_alloc 1614 1612 -2 __do_sys_swapon 4702 4699 -3 __list_lru_init 655 651 -4 nic_probe 2379 2374 -5 store_user_store 118 111 -7 red_zone_store 106 99 -7 poison_store 106 99 -7 wq_numa_init 348 338 -10 __kmem_cache_empty 75 65 -10 task_numa_free 186 173 -13 merge_across_nodes_store 351 336 -15 irq_create_affinity_masks 1261 1246 -15 do_numa_crng_init 343 321 -22 task_numa_fault 4760 4737 -23 swapfile_init 179 156 -23 hv_synic_alloc 536 492 -44 apply_wqattrs_prepare 746 695 -51 Link: http://lkml.kernel.org/r/20190201223029.GA15820@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
THP pages can get split during different code paths. An incremented reference count does imply we will not split the compound page. But the pmd entry can be converted to level 4 pte entries. Keep the code simpler by allowing large IOMMU page size only if the guest ram is backed by hugetlb pages. Link: http://lkml.kernel.org/r/20190114095438.32470-6-aneesh.kumar@linux.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
The current code doesn't do page migration if the page allocated is a compound page. With HugeTLB migration support, we can end up allocating hugetlb pages from CMA region. Also, THP pages can be allocated from CMA region. This patch updates the code to handle compound pages correctly. The patch also switches to a single get_user_pages with the right count, instead of doing one get_user_pages per page. That avoids reading page table multiple times. This is done by using get_user_pages_longterm, because that also takes care of DAX backed pages. DAX pages lifetime is dictated by file system rules and as such, we need to make sure that we free these pages on operations like truncate and punch hole. If we have long term pin on these pages, which are mostly return to userspace with elevated page count, the entity holding the long term pin may not be aware of the fact that file got truncated and the file system blocks possibly got reused. That can result in corruption. The patch also converts the hpas member of mm_iommu_table_group_mem_t to a union. We use the same storage location to store pointers to struct page. We cannot update all the code path use struct page *, because we access hpas in real mode and we can't do that struct page * to pfn conversion in real mode. [aneesh.kumar@linux.ibm.com: address review feedback, update changelog] Link: http://lkml.kernel.org/r/20190227144736.5872-4-aneesh.kumar@linux.ibm.com Link: http://lkml.kernel.org/r/20190114095438.32470-5-aneesh.kumar@linux.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Hildenbrand 提交于
The VDSO is part of the kernel image and therefore the struct pages are marked as reserved during boot. As we install a special mapping, the actual struct pages will never be exposed to MM via the page tables. We can therefore leave the pages marked as reserved. Link: http://lkml.kernel.org/r/20190114125903.24845-4-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
NestMMU requires us to mark the pte invalid and flush the tlb when we do a RW upgrade of pte. We fixed a variant of this in the fault path in bd5050e3 ("powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang"). Link: http://lkml.kernel.org/r/20190116085035.29729-6-aneesh.kumar@linux.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
NestMMU requires us to mark the pte invalid and flush the tlb when we do a RW upgrade of pte. We fixed a variant of this in the fault path in bd5050e3 ("powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang"). Do the same for mprotect upgrades. Hugetlb is handled in the next patch. Link: http://lkml.kernel.org/r/20190116085035.29729-4-aneesh.kumar@linux.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anshuman Khandual 提交于
Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 3月, 2019 4 次提交
-
-
由 Jason Yan 提交于
This code is dead. Just remove it. Signed-off-by: NJason Yan <yanaijie@huawei.com> Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Joel Stanley 提交于
This updates the skiroot defconfig with the version from the OpenPower firmwre build tree. Important changes are the addition of QED and E1000E ethernet drivers. Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We added runtime allocation of 16G pages in commit 4ae279c2 ("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") That was done to enable 16G allocation on PowerNV and KVM config. In case of KVM config, we mostly would have the entire guest RAM backed by 16G hugetlb pages for this to work. PAPR do support partial backing of guest RAM with hugepages via ibm,expected#pages node of memory node in the device tree. This means rest of the guest RAM won't be backed by 16G contiguous pages in the host and hence a hash page table insertion can fail in such case. An example error message will look like hash-mmu: mm: Hashing failure ! EA=0x7efc00000000 access=0x8000000000000006 current=readback hash-mmu: trap=0x300 vsid=0x67af789 ssize=1 base psize=14 psize 14 pte=0xc000000400000386 readback[12260]: unhandled signal 7 at 00007efc00000000 nip 00000000100012d0 lr 000000001000127c code 2 This patch address that by preventing runtime allocation of 16G hugepages in LPAR config. To allocate 16G hugetlb one need to kernel command line hugepagesz=16G hugepages=<number of 16G pages> With radix translation mode we don't run into this issue. This change will prevent runtime allocation of 16G hugetlb pages on kvm with hash translation mode. However, with the current upstream it was observed that 16G hugetlbfs backed guest doesn't boot at all. We observe boot failure with the below message: [131354.647546] KVM: map_vrma at 0 failed, ret=-4 That means this patch is not resulting in an observable regression. Once we fix the boot issue with 16G hugetlb backed memory, we need to use ibm,expected#pages memory node attribute to indicate 16G page reservation to the guest. This will also enable partial backing of guest RAM with 16G pages. Fixes: 4ae279c2 ("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Linus Torvalds 提交于
Every in-kernel use of this function defined it to KERNEL_DS (either as an actual define, or as an inline function). It's an entirely historical artifact, and long long long ago used to actually read the segment selector valueof '%ds' on x86. Which in the kernel is always KERNEL_DS. Inspired by a patch from Jann Horn that just did this for a very small subset of users (the ones in fs/), along with Al who suggested a script. I then just took it to the logical extreme and removed all the remaining gunk. Roughly scripted with git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/' git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d' plus manual fixups to remove a few unusual usage patterns, the couple of inline function cases and to fix up a comment that had become stale. The 'get_ds()' function remains in an x86 kvm selftest, since in user space it actually does something relevant. Inspired-by: NJann Horn <jannh@google.com> Inspired-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 3月, 2019 1 次提交
-
-
由 Christophe Leroy 提交于
Clear the on-stack STACK_FRAME_REGS_MARKER on exception exit in order to avoid confusing stacktrace like the one below. Call Trace: [c0e9dca0] [c01c42a0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c4684] kasan_report+0xfc/0x180 [c0e9dd10] [c0895130] memchr+0x24/0x74 [c0e9dd30] [c00a9e38] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab710] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc60] vprintk_emit+0x188/0x1c4 --- interrupt: c0e9df00 at 0x400f330 LR = init_stack+0x1f00/0x2000 [c0e9de80] [c00ae3c4] printk+0xa8/0xcc (unreliable) [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 With this patch the trace becomes: Call Trace: [c0e9dca0] [c01c42c0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c46a4] kasan_report+0xfc/0x180 [c0e9dd10] [c0895150] memchr+0x24/0x74 [c0e9dd30] [c00a9e58] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab730] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc80] vprintk_emit+0x188/0x1c4 [c0e9de80] [c00ae3e4] printk+0xa8/0xcc [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 Cc: stable@vger.kernel.org Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 02 3月, 2019 5 次提交
-
-
由 Joe Lawrence 提交于
As tglx points out, there are no in-tree module users of save_stack_trace_tsk_reliable() and its x86 counterpart is not exported, so remove the powerpc symbol export. Suggested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJoe Lawrence <joe.lawrence@redhat.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Qian Cai 提交于
The commit 24b6d416 ("mm: pass the vmem_altmap to vmemmap_free") removed a line in vmemmap_free(), altmap = to_vmem_altmap((unsigned long) section_base); but left a variable no longer used. arch/powerpc/mm/init_64.c: In function 'vmemmap_free': arch/powerpc/mm/init_64.c:277:16: error: variable 'section_base' set but not used [-Werror=unused-but-set-variable] Signed-off-by: NQian Cai <cai@lca.pw> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Qian Cai 提交于
Fix compiler warning: arch/powerpc/mm/hugetlbpage-hash64.c: In function '__hash_page_huge': arch/powerpc/mm/hugetlbpage-hash64.c:29:28: warning: variable 'sz' set but not used [-Wunused-but-set-variable] mpe: The last usage of sz was removed in 0895ecda ("powerpc/mm: Bring hugepage PTE accessor functions back into sync with normal accessors"). Signed-off-by: NQian Cai <cai@lca.pw> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Rashmica Gupta 提交于
We were always calling base_hpte_find() with primary = true, even when we wanted to check the secondary table. mpe: I broke this when refactoring Rashmica's original patch. Fixes: 1515ab93 ("powerpc/mm: Dump hash table") Signed-off-by: NRashmica Gupta <rashmica.g@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Firoz Khan 提交于
The __SYSCALL macro's arguments are system call number, system call entry name and number of arguments for the system call. Argument- nargs in __SYSCALL(nr, entry, nargs) is neither calculated nor used anywhere. So it would be better to keep the implementaion as __SYSCALL(nr, entry). This will unifies the implementation with some other architetures too. Signed-off-by: NFiroz Khan <firoz.khan@linaro.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 01 3月, 2019 2 次提交
-
-
由 Nicholas Piggin 提交于
The recent commit got this test wrong, it declared the assembler symbols the wrong way, and also used the wrong symbol name (xxx_start rather than start_xxx, see asm/head-64.h). Fixes: ccd47702 ("powerpc/64s: Fix HV NMI vs HV interrupt recoverability test") Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Suraj Jitindar Singh 提交于
Add KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST & KVM_PPC_CPU_BEHAV_FLUSH_COUNT_CACHE to the characteristics returned from the H_GET_CPU_CHARACTERISTICS H-CALL, as queried from either the hypervisor or the device tree. Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
-
- 28 2月, 2019 1 次提交
-
-
由 Alexey Kardashevskiy 提交于
We store 2 multilevel tables in iommu_table - one for the hardware and one with the corresponding userspace addresses. Before allocating the tables, the iommu_table_group_ops::get_table_size() hook returns the combined size of the two and VFIO SPAPR TCE IOMMU driver adjusts the locked_vm counter correctly. When the table is actually allocated, the amount of allocated memory is stored in iommu_table::it_allocated_size and used to decrement the locked_vm counter when we release the memory used by the table; .get_table_size() and .create_table() calculate it independently but the result is expected to be the same. However the allocator does not add the userspace table size to .it_allocated_size so when we destroy the table because of VFIO PCI unplug (i.e. VFIO container is gone but the userspace keeps running), we decrement locked_vm by just a half of size of memory we are releasing. To make things worse, since we enabled on-demand allocation of indirect levels, it_allocated_size contains only the amount of memory actually allocated at the table creation time which can just be a fraction. It is not a problem with incrementing locked_vm (as get_table_size() value is used) but it is with decrementing. As the result, we leak locked_vm and may not be able to allocate more IOMMU tables after few iterations of hotplug/unplug. This sets it_allocated_size in the pnv_pci_ioda2_ops::create_table() hook to what pnv_pci_ioda2_get_table_size() returns so from now on we have a single place which calculates the maximum memory a table can occupy. The original meaning of it_allocated_size is somewhat lost now though. We do not ditch it_allocated_size whatsoever here and we do not call get_table_size() from vfio_iommu_spapr_tce.c when decrementing locked_vm as we may have multiple IOMMU groups per container and even though they all are supposed to have the same get_table_size() implementation, there is a small chance for failure or confusion. Fixes: 090bad39 ("powerpc/powernv: Add indirect levels to it_userspace") Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 27 2月, 2019 1 次提交
-
-
由 Christophe Leroy 提交于
The commit identified below adds MC_BTB_FLUSH macro only when CONFIG_PPC_FSL_BOOK3E is defined. This results in the following error on some configs (seen several times with kisskb randconfig_defconfig) arch/powerpc/kernel/exceptions-64e.S:576: Error: Unrecognized opcode: `mc_btb_flush' make[3]: *** [scripts/Makefile.build:367: arch/powerpc/kernel/exceptions-64e.o] Error 1 make[2]: *** [scripts/Makefile.build:492: arch/powerpc/kernel] Error 2 make[1]: *** [Makefile:1043: arch/powerpc] Error 2 make: *** [Makefile:152: sub-make] Error 2 This patch adds a blank definition of MC_BTB_FLUSH for other cases. Fixes: 10c5e83a ("powerpc/fsl: Flush the branch predictor at each kernel entry (64bit)") Cc: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NDaniel Axtens <dja@axtens.net> Reviewed-by: NDiana Craciun <diana.craciun@nxp.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-