- 16 7月, 2018 1 次提交
-
-
由 Ryder Lee 提交于
Normally, we didn't release this kind of baord to user. This specific board exists only in the early stage of development inside MediaTek - and that may confuse peoples. Hence this patch removes related files accordingly. Cc: John Crispin <john@phrozen.org> Cc: Sean Wang <sean.wang@mediatek.com> Signed-off-by: NRyder Lee <ryder.lee@mediatek.com> Acked-by: NJohn Crispin <john@phrozen.org> Acked-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
- 26 5月, 2018 4 次提交
-
-
由 Sricharan R 提交于
Reviewed-by: NAbhishek Sahu <absahu@codeaurora.org> Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NSricharan R <sricharan@codeaurora.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Sricharan R 提交于
Reviewed-by: NAbhishek Sahu <absahu@codeaurora.org> Signed-off-by: NSricharan R <sricharan@codeaurora.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Sricharan R 提交于
Reviewed-by: NAbhishek Sahu <absahu@codeaurora.org> Signed-off-by: NSricharan R <sricharan@codeaurora.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Sricharan R 提交于
Reviewed-by: NAbhishek Sahu <absahu@codeaurora.org> Tested-by: NVaradarajan Narayanan <varada@codeaurora.org> Signed-off-by: NSricharan R <sricharan@codeaurora.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
- 25 5月, 2018 4 次提交
-
-
由 Attila Szöllősi 提交于
This patch adds a DTS file for Sony Xperia Z1 Compact with support for regulators, serial UART, eMMC/SD-card, USB, charger, backlight, coincell and buttons. Work based on arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts. Signed-off-by: NAttila Szöllősi <ata2001@airmail.cc> Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 James Feist 提交于
S2600WF is a Intel platform family with an ASPEED AST2500 BMC. Signed-off-by: NJames Feist <james.feist@linux.intel.com> Signed-off-by: NJoel Stanley <joel@jms.id.au>
-
由 Brian Yang 提交于
The Inventec Lanyang is Power 9 platform with ast2500 BMC. Signed-off-by: NBrian Yang <yang.brianc.w@inventec.com> Acked-by: NAndrew Jeffery <andrew@aj.id.au> Signed-off-by: NJoel Stanley <joel@jms.id.au>
-
由 Amithash Prasad 提交于
Initial introduction of Portwell Neptune family equipped with Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a ASPEED ast2500 BMC manufactured by Portwell. Specifically, This adds the neptune platform device tree file including the flash layout used by the neptune machines. Signed-off-by: NAmithash Prasad <amithash@fb.com> Acked-by: NAndrew Jeffery <andrew@aj.id.au> Signed-off-by: NJoel Stanley <joel@jms.id.au>
-
- 24 5月, 2018 2 次提交
-
-
由 Alexander Monakov 提交于
Valve Steam Link is a consumer device built around the Marvell BG2CD SoC. This board file enables the UART, USB and Ethernet interfaces as well as internal I2C and SDIO, and adds SoC voltage regulator and board-specific GPIO restart method info. Cc: Sam Lantinga <saml@valvesoftware.com> Signed-off-by: NAlexander Monakov <amonakov@ispras.ru> Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
-
由 Martin Blumenstingl 提交于
Currently there are two identical Kconfig options where only differences are the Kconfig help text and the list of .dtbs that are built: - MACH_MESON8 - MACH_MESON8B Build the Meson8b .dtbs when MACH_MESON8 is selected to get rid of the latter Kconfig symbol later. Suggested-by: NKevin Hilman <khilman@baylibre.com> Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
- 21 5月, 2018 1 次提交
-
-
由 Stefan Mavrodiev 提交于
With the new rev.E of A20-SOM-EVB, there is option for 16GB eMMC. Currently used card is KLMAG2GEND, wired to MMC2 slot. Signed-off-by: NStefan Mavrodiev <stefan@olimex.com> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
-
- 11 5月, 2018 3 次提交
-
-
由 Sean Wang 提交于
Add MT7623N reference board with eMMC. On the board, there is additional external PHY ICPlus IP1001 transceiver available by port 5 on the MDIO bus connectted with GMAC2. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Suggested-by: NRyder Lee <ryder.lee@mediatek.com> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
由 Sean Wang 提交于
Add MT7623A reference board with eMMC and NAND, respectively. The both boards compared against MT7623N BPI-R2, we could see there are UART[0-1] and USB2 being removed, I2C2 and SPI1 being added, I2C1, UART2 owning distinct pin usage and an extra WM8960 codec chip plugged into the I2C1 offering the functionality of audio player and recorder through SoC audio front-end engine (AFE). Signed-off-by: NSean Wang <sean.wang@mediatek.com> Suggested-by: NRyder Lee <ryder.lee@mediatek.com> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
由 Oleg Ivanov 提交于
The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as well as a Ricoh RN5T618 system power controller. It also comes with an Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and Bluetooth is currently not added because the Linux drivers currently only support one MMC controller and that is used for the SD card). Signed-off-by: NOleg Ivanov <balbes-150@yandex.ru> Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
- 10 5月, 2018 2 次提交
-
-
由 Dan Haab 提交于
It's an access point based on BCM47094 SoC with two BCM4366E wireless chipsets. Signed-off-by: NDan Haab <dan.haab@luxul.com> Acked-by: NRafał Miłecki <rafal@milecki.pl> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Dan Haab 提交于
Luxul XWR-3150 is a wireless router similar to the XWR-3100 except: 1) It has more RAM 2) Its NAND controller in running in BCH8 mode 3) LAN ports LEDs are hardware controlled Signed-off-by: NDan Haab <dan.haab@luxul.com> Acked-by: NRafał Miłecki <rafal@milecki.pl> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
- 04 5月, 2018 1 次提交
-
-
由 Linus Walleij 提交于
The U8540 was an evolved version of the U8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the U8500. Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 03 5月, 2018 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting server platforms but it did not make it to the market really. There are no development boards with it and probably there are no real products neither. The development for Exynos5440 ended in 2013 and since then the platform is in maintenance mode. Remove all Device Tree sources for Exynos5440, as first step of removal of the platform to simplify the code and drivers. Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Reviewed-by: NAndi Shyti <andi@etezian.org> Reviewed-by: NRob Herring <robh@kernel.org>
-
- 01 5月, 2018 1 次提交
-
-
由 Robert Nelson 提交于
PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer. This board family can be indentified by the A335PBGL in the at24 eeprom: A2: [aa 55 33 ee 41 33 33 35 50 42 47 4c 30 30 41 32 |.U3.A335PBGL00A2|] http://beagleboard.org/pocket https://github.com/beagleboard/pocketbeagleSigned-off-by: NRobert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> CC: Peter Robinson <pbrobinson@redhat.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 25 4月, 2018 3 次提交
-
-
由 Chen-Yu Tsai 提交于
This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit 6ca35864 ("ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
-
由 Chen-Yu Tsai 提交于
The dtb entry for the Banana Pi M2 Zero in the device tree makefile somehow ended up in between two Orange Pi boards. Move it so the list is properly sorted. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
-
由 Miquel Raynal 提交于
The Nintendo NES/SuperNES features an R16 already well supported in mainline. The console over UART0 may be wired on two ports of the R16, both available on the NES Classic PCB. Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
-
- 24 4月, 2018 1 次提交
-
-
由 Stefan Wahren 提交于
The Raspberry Pi 3 B+ has the following major differences compared to the model 3 B: * Microchip LAN7515 (Gigabit Ethernet with integrated USB 2.0 HUB) * Cypress CYW43455 (802.11n/ac and BT 4.2) We need to add the USB LAN chip so the bootloader can add the MAC address. This is necessary because there ain't an EEPROM or a valid OTP. Signed-off-by: NPhil Elwell <phil@raspberrypi.org> Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 23 4月, 2018 1 次提交
-
-
由 Lukasz Majewski 提交于
This commit adds device tree description of Kieback & Peter GmbH iMX6Q TPC board. Signed-off-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 18 4月, 2018 1 次提交
-
-
由 Jagan Teki 提交于
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application. notable features: CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz Memory Up to 2 GB DDR3-1066 Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4 port 8 bit CSI INPUT MIPI-CSI INPUT 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 16 4月, 2018 3 次提交
-
-
由 Marek Vasut 提交于
Add support for the DH i.MX6 Quad based SoM and a PDK2 evaluation board. The evaluation board features three serial ports, USB OTG, USB host with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, mSATA, analog audio, PCIe and HDMI video output. All of the aforementioned features are supported by this patch. Signed-off-by: NMarek Vasut <marex@denx.de> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Biju Das 提交于
Add support for iWave iW-RainboW-G23S single board computer based on RZ/G1C. Signed-off-by: NBiju Das <biju.das@bp.renesas.com> Reviewed-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Jagan Teki 提交于
This patch adds initial support for BTicino i.MX6DL Mamoj board. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NSimone CIANNI <simone.cianni@bticino.it> Signed-off-by: NRaffaele RECALCATI <raffaele.recalcati@bticino.it> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 05 4月, 2018 1 次提交
-
-
由 Tomer Maimon 提交于
Signed-off-by: NTomer Maimon <tmaimon77@gmail.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 20 3月, 2018 1 次提交
-
-
由 Linus Walleij 提交于
The Versatile board can be equipped with a interface board just named "IB2". This was created in the early 2000s for prototyping GSM candybar phone form factor products. The IB2 board contains: - Cascaded interrupt controller - Enfora Enabler GSM0308 quad-band module with antenna and separate audio jack - Keypad with joystick - Sanyo 2.5" color display - A 28-pin connector for mounting a camera This adds a DTS file for the combination of the Versatile AB with an IB2 daughterboard mounted, making the LED blink and making the system controller available for drivers, such as the panel driver. The device tree bindings already exist in Documentation/devicetree/bindings/arm/arm-boards. Cc: Mali DP Maintainers <malidp@foss.arm.com> Reviewed-by: NLiviu Dudau <liviu.dudau@arm.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 17 3月, 2018 1 次提交
-
-
由 Marek Vasut 提交于
Stout base board support making use of 1 GiB of memory, the Renesas H2 r8a7790 SoC with the SCIFA0 serial port and CA15 with ARM architected timer. Furthermore, this device tree contains entries for: - 4x LEDs - SDHI SD/MMC controller - Display unit with HDMI output - SH fast ethernet controller - QSPI controller with S25FL512S attached to it - I2C controller with DA9210 and DA 9063 PMICs Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 14 3月, 2018 1 次提交
-
-
由 Ken Chen 提交于
The Qualcomm Centriq 2400 REP (Reference Evaluation Platform) is an aarch64 Armv8 server platform with an ast2520 BMC. Signed-off-by: NKen Chen <chen.kenyy@inventec.com> Acked-by: NAndrew Jeffery <andrew@aj.id.au> Signed-off-by: NJoel Stanley <joel@jms.id.au>
-
- 09 3月, 2018 1 次提交
-
-
由 Daniele Debernardi 提交于
This DTS has support for the Samsung Galaxy S5 (codenamed klte). Initial version have support just for serial console. Cc: Andy Gross <andy.gross@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Signed-off-by: NDaniele Debernardi <drebrez@gmail.com> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
- 08 3月, 2018 6 次提交
-
-
由 Marcel Ziswiler 提交于
Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Nobuhiro Iwamatsu 提交于
This add a DTS for the Digilent Zybo Z7 board. This board is the successor board of Zybo, these are almost the same except for ps-clk-frequency specifications. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, ethernet, i2c, qspi, spi and uart. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NRob Herring <robh@kernel.org>
-
由 Michal Simek 提交于
zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, 2x i2c, nor flash, spi and uart. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NRob Herring <robh@kernel.org>
-
由 Michal Simek 提交于
zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, i2c, nand uart, spi and usb. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NRob Herring <robh@kernel.org>
-
由 Michal Simek 提交于
zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NRob Herring <robh@kernel.org>
-