Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 06 5月, 2020 5 次提交
  3. 23 4月, 2020 1 次提交
    • J
      perf stat: Improve runtime stat for interval mode · 197ba86f
      由 Jin Yao 提交于 
      For interval mode, the metric is printed after the '#' character if it
exists. But it's not calculated by the counts generated in this
interval.

See the following examples:

  root@kbl-ppc:~# perf stat -M CPI -I1000 --interval-count 2
  #           time             counts unit events
       1.000422803            764,809      inst_retired.any          #      2.9 CPI
       1.000422803          2,234,932      cycles
       2.001464585          1,960,061      inst_retired.any          #      1.6 CPI
       2.001464585          4,022,591      cycles

The second CPI should not be 1.6 (4,022,591/1,960,061 is 2.1)

  root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
  #           time             counts unit events
       1.000429493          2,869,311      cycles
       1.000429493            816,875      instructions              #    0.28  insn per cycle
       2.001516426          9,260,973      cycles
       2.001516426          5,250,634      instructions              #    0.87  insn per cycle

The second 'insn per cycle' should not be 0.87 (5,250,634/9,260,973 is
0.57).

The current code uses a global variable 'rt_stat' for tracking and
updating the std dev of runtime stat. Unlike the counts, 'rt_stat' is not
reset for interval. While the counts are reset for interval.

  perf_stat_process_counter()
  {
          if (config->interval)
                  init_stats(ps->res_stats);
  }

So for interval mode, the 'rt_stat' variable should be reset too.

This patch resets 'rt_stat' before read_counters(), so the runtime stat
is only calculated by the counts generated in this interval.

With this patch:

  root@kbl-ppc:~# perf stat -M CPI -I1000 --interval-count 2
  #           time             counts unit events
       1.000420924          2,408,818      inst_retired.any          #      2.1 CPI
       1.000420924          5,010,111      cycles
       2.001448579          2,798,407      inst_retired.any          #      1.6 CPI
       2.001448579          4,599,861      cycles

  root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
  #           time             counts unit events
       1.000428555          2,769,714      cycles
       1.000428555            774,462      instructions              #    0.28  insn per cycle
       2.001471562          3,595,904      cycles
       2.001471562          1,243,703      instructions              #    0.35  insn per cycle

Now the second 'insn per cycle' and CPI are calculated by the counts
generated in this interval.
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-By: NKajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200420145417.6864-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      197ba86f
  5. 16 4月, 2020 1 次提交
  7. 04 3月, 2020 1 次提交
    • J
      perf stat: Show percore counts in per CPU output · 1af62ce6
      由 Jin Yao 提交于 
      We have supported the event modifier "percore" which sums up the event
counts for all hardware threads in a core and show the counts per core.

For example,

 # perf stat -e cpu/event=cpu-cycles,percore/ -a -A -- sleep 1

  Performance counter stats for 'system wide':

 S0-D0-C0                395,072      cpu/event=cpu-cycles,percore/
 S0-D0-C1                851,248      cpu/event=cpu-cycles,percore/
 S0-D0-C2                954,226      cpu/event=cpu-cycles,percore/
 S0-D0-C3              1,233,659      cpu/event=cpu-cycles,percore/

This patch provides a new option "--percore-show-thread". It is used
with event modifier "percore" together to sum up the event counts for
all hardware threads in a core but show the counts per hardware thread.

This is essentially a replacement for the any bit (which is gone in
Icelake). Per core counts are useful for some formulas, e.g. CoreIPC.
The original percore version was inconvenient to post process. This
variant matches the output of the any bit.

With this patch, for example,

 # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread  -- sleep 1

  Performance counter stats for 'system wide':

 CPU0               2,453,061      cpu/event=cpu-cycles,percore/
 CPU1               1,823,921      cpu/event=cpu-cycles,percore/
 CPU2               1,383,166      cpu/event=cpu-cycles,percore/
 CPU3               1,102,652      cpu/event=cpu-cycles,percore/
 CPU4               2,453,061      cpu/event=cpu-cycles,percore/
 CPU5               1,823,921      cpu/event=cpu-cycles,percore/
 CPU6               1,383,166      cpu/event=cpu-cycles,percore/
 CPU7               1,102,652      cpu/event=cpu-cycles,percore/

We can see counts are duplicated in CPU pairs (CPU0/CPU4, CPU1/CPU5,
CPU2/CPU6, CPU3/CPU7).

The interval mode also works. For example,

 # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread  -I 1000
 #           time CPU                    counts unit events
      1.000425421 CPU0                 925,032      cpu/event=cpu-cycles,percore/
      1.000425421 CPU1                 430,202      cpu/event=cpu-cycles,percore/
      1.000425421 CPU2                 436,843      cpu/event=cpu-cycles,percore/
      1.000425421 CPU3               1,192,504      cpu/event=cpu-cycles,percore/
      1.000425421 CPU4                 925,032      cpu/event=cpu-cycles,percore/
      1.000425421 CPU5                 430,202      cpu/event=cpu-cycles,percore/
      1.000425421 CPU6                 436,843      cpu/event=cpu-cycles,percore/
      1.000425421 CPU7               1,192,504      cpu/event=cpu-cycles,percore/

If we offline CPU5, the result is:

 # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1

  Performance counter stats for 'system wide':

 CPU0               2,752,148      cpu/event=cpu-cycles,percore/
 CPU1               1,009,312      cpu/event=cpu-cycles,percore/
 CPU2               2,784,072      cpu/event=cpu-cycles,percore/
 CPU3               2,427,922      cpu/event=cpu-cycles,percore/
 CPU4               2,752,148      cpu/event=cpu-cycles,percore/
 CPU6               2,784,072      cpu/event=cpu-cycles,percore/
 CPU7               2,427,922      cpu/event=cpu-cycles,percore/

        1.001416041 seconds time elapsed

 v4:
 ---
 Ravi Bangoria reports an issue in v3. Once we offline a CPU,
 the output is not correct. The issue is we should use the cpu
 idx in print_percore_thread rather than using the cpu value.

 v3:
 ---
 1. Fix the interval mode output error
 2. Use cpu value (not cpu index) in config->aggr_get_id().
 3. Refine the code according to Jiri's comments.

 v2:
 ---
 Add the explanation in change log. This is essentially a replacement
 for the any bit. No code change.
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200214080452.26402-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1af62ce6
  9. 29 11月, 2019 3 次提交
  11. 19 11月, 2019 1 次提交
    • I
      perf parse: Report initial event parsing error · a910e466
      由 Ian Rogers 提交于 
      Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:

  https://lkml.org/lkml/2019/10/28/680

An example error is:

  $ tools/perf/perf stat -e c/c/
  WARNING: multiple event parsing errors
  event syntax error: 'c/c/'
                         \___ unknown term

  valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore

Initial error:

  event syntax error: 'c/c/'
                      \___ Cannot find PMU `c'. Missing kernel support?
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

      -e, --event <event>   event selector. use 'perf list' to list available events
Signed-off-by: NIan Rogers <irogers@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a910e466
  13. 07 11月, 2019 1 次提交
    • J
      perf stat: Add --per-node agregation support · 86895b48
      由 Jiri Olsa 提交于 
      Adding new --per-node option to aggregate counts per NUMA
nodes for system-wide mode measurements.

You can specify --per-node in live mode:

  # perf stat  -a -I 1000 -e cycles --per-node
  #           time node   cpus             counts unit events
       1.000542550 N0       20          6,202,097      cycles
       1.000542550 N1       20            639,559      cycles
       2.002040063 N0       20          7,412,495      cycles
       2.002040063 N1       20          2,185,577      cycles
       3.003451699 N0       20          6,508,917      cycles
       3.003451699 N1       20            765,607      cycles
  ...

Or in the record/report stat session:

  # perf stat record -a -I 1000 -e cycles
  #           time             counts unit events
       1.000536937         10,008,468      cycles
       2.002090152          9,578,539      cycles
       3.003625233          7,647,869      cycles
       4.005135036          7,032,086      cycles
  ^C     4.340902364          3,923,893      cycles

  # perf stat report --per-node
  #           time node   cpus             counts unit events
       1.000536937 N0       20          9,355,086      cycles
       1.000536937 N1       20            653,382      cycles
       2.002090152 N0       20          7,712,838      cycles
       2.002090152 N1       20          1,865,701      cycles
       3.003625233 N0       20          6,604,441      cycles
       3.003625233 N1       20          1,043,428      cycles
       4.005135036 N0       20          6,350,522      cycles
       4.005135036 N1       20            681,564      cycles
       4.340902364 N0       20          3,403,188      cycles
       4.340902364 N1       20            520,705      cycles
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20190904073415.723-4-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      86895b48
  15. 15 10月, 2019 1 次提交
  17. 25 9月, 2019 2 次提交
  19. 21 9月, 2019 1 次提交
  21. 20 9月, 2019 4 次提交
    • S
      perf stat: Fix a segmentation fault when using repeat forever · 443f2d5b
      由 Srikar Dronamraju 提交于 
      Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.

Without fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
  #           time             counts unit events
       5.000211692  3,13,89,82,34,157      cycles
      10.000380119  1,53,98,52,22,294      cycles
      10.040467280       17,16,79,265      cycles
  Segmentation fault

This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..)  if interval is set.

With fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
   #           time             counts unit events
       5.019866622  3,15,14,43,08,697      cycles
      10.039865756  3,15,16,31,95,261      cycles
      10.059950628     1,26,05,47,158      cycles
       5.009902655  3,14,52,62,33,932      cycles
      10.019880228  3,14,52,22,89,154      cycles
      10.030543876       66,90,18,333      cycles
       5.009848281  3,14,51,98,25,437      cycles
      10.029854402  3,15,14,93,04,918      cycles
       5.009834177  3,14,51,95,92,316      cycles

Committer notes:

Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:

  (gdb) run stat -r0 -I500 sleep 1
  <SNIP>
  Program received signal SIGSEGV, Segmentation fault.
  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  866		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
  (gdb) bt
  #0  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  #1  0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
  #2  0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
  #3  0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
  #4  0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
  #5  0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
  #6  0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
  (gdb)

Mostly the same as just before this patch:

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  964		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
  (gdb) bt
  #0  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  #1  0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
      at util/stat-display.c:1172
  #2  0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
  #3  0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
  #4  0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
  #5  0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
  #6  0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
  #7  0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
  (gdb)

Fixes: d4f63a47 ("perf stat: Introduce print_counters function")
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      443f2d5b
    • S
      perf stat: Reset previous counts on repeat with interval · b63fd11c
      由 Srikar Dronamraju 提交于 
      When using 'perf stat' with repeat and interval option, it shows wrong
values for events.

The wrong values will be shown for the first interval on the second and
subsequent repetitions.

Without the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.000282489                 53      faults
     2.000282489                513      sched:sched_switch
     4.005478208              3,721      faults
     4.005478208              2,666      sched:sched_switch
     5.025470933                395      faults
     5.025470933              1,307      sched:sched_switch
     2.009602825 1,84,46,74,40,73,70,95,47,520      faults 		<------
     2.009602825 1,84,46,74,40,73,70,95,49,568      sched:sched_switch  <------
     4.019612206              4,730      faults
     4.019612206              2,746      sched:sched_switch
     5.039615484              3,953      faults
     5.039615484              1,496      sched:sched_switch
     2.000274620 1,84,46,74,40,73,70,95,47,520      faults		<------
     2.000274620 1,84,46,74,40,73,70,95,47,520      sched:sched_switch	<------
     4.000480342              4,282      faults
     4.000480342              2,303      sched:sched_switch
     5.000916811              1,322      faults
     5.000916811              1,064      sched:sched_switch
  #

prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.

The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.

On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.

Hence there is a possibility of events showing up as big number.

Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.

With the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.019349347              2,597      faults
     2.019349347              2,753      sched:sched_switch
     4.019577372              3,098      faults
     4.019577372              2,532      sched:sched_switch
     5.019415481              1,879      faults
     5.019415481              1,356      sched:sched_switch
     2.000178813              8,468      faults
     2.000178813              2,254      sched:sched_switch
     4.000404621              7,440      faults
     4.000404621              1,266      sched:sched_switch
     5.040196079              2,458      faults
     5.040196079                556      sched:sched_switch
     2.000191939              6,870      faults
     2.000191939              1,170      sched:sched_switch
     4.000414103                541      faults
     4.000414103                902      sched:sched_switch
     5.000809863                450      faults
     5.000809863                364      sched:sched_switch
  #

Committer notes:

This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.

Fixes: 13370a9b ("perf stat: Add interval printing")
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b63fd11c
    • A
      perf tools: Move event synthesizing routines to separate header · ea49e01c
      由 Arnaldo Carvalho de Melo 提交于 
      Those are the only routines using the perf_event__handler_t typedef and
are all related, so move to a separate header to reduce the header
dependency tree, lots of places were getting event.h and even stdio.h,
limits.h indirectly, so fix those as well.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ea49e01c
    • A
      perf stat: Move perf_stat_synthesize_config() to event.h · b251892d
      由 Arnaldo Carvalho de Melo 提交于 
      Together with the other synthsizers, and rename it to
perf_event__synthesize_stat_events().

This allows us to stop including event.h in util/stat.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-q5ebhrp44txboobs86htu5r9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b251892d
  23. 10 9月, 2019 1 次提交
  25. 01 9月, 2019 1 次提交
  27. 30 8月, 2019 2 次提交
  29. 29 8月, 2019 1 次提交
  31. 26 8月, 2019 1 次提交
  33. 23 8月, 2019 1 次提交
  35. 22 8月, 2019 1 次提交
  37. 30 7月, 2019 11 次提交