* Print info about overriding PIO mode in ide_get_best_pio_mode().

* Remove info about overriding PIO mode from cmd64{0,x} host drivers.

* Remove no longer needed ide_pio_data_t.overridden field.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add sil_tuneproc() wrapper for siimage_tuneproc() which also sets
  PIO mode on the device.

* Add missing ide_get_best_pio_mode() call to sil_tuneproc() so
  "pio" == 255 (autotune) is handled correctly (previously PIO0 was used)
  and "pio" values > 4 && < 255 are filtered to PIO4 (instead of PIO0).

* Add code limiting maximum PIO mode according to the pair device capabilities
  to sil_tuneproc().

* Convert users of config_siimage_chipset_for_pio() to use sil_tune_pio() and
  sil_tuneproc().  This fixes PIO fallback in siimage_config_drive_for_dma() to
  use max PIO mode available instead of PIO4 (config_siimage_chipset_for_pio()
  used wrong arguments for ide_get_best_pio_mode() and as a results always
  tried to set PIO4).

* Remove no longer needed siimage_taskfile_timing()
  and config_siimage_chipset_for_pio().

* Enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
  from siimage_speedproc()

* Bump driver version.

v2:
* Fix issues noticed by Sergei:
  - correct pair device check
  - trim only taskfile PIO to the slowest of the master/slave
  - enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
    from siimage_speedproc()
  - add TODO item for IORDY bugs
  - minor cleanups
Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Split off exisiting atiixp_tuneproc() into atiixp_tune_pio()
  and then add setting device PIO mode to atiixp_tuneproc().

* Add missing ide_get_best_pio_mode() call to atiixp_tuneproc() so
  "pio" == 255 (autotune) is handled correctly and "pio" values > 4 && < 255
  are filtered to PIO4 (previously "pio" == 5 could result in wrong timings
  being used and "pio" values > 4 && < 255 in an OOPS).

* Handle PIO modes early in atiixp_speedproc() so save_mdma_mode[]
  doesn't get cleared.

* In atiixp_dma_check():
  - fix max_mode argument for ide_get_best_pio_mode()
  - don't call atiixp_dma_2_pio() so PIO1 doesn't get remapped to PIO0
  - use atiixp_tuneproc() instead of atiixp_speedproc()

* Bump driver version.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Various old IDE drivers go mapping ROM devices for no apparent reason and
without using the ROM mapping API we now have. They don't actually use
the ROM they map and the new libata drivers are happy without it being
mapped so rather than port them lets just junk it for the next -rc1.
Signed-off-by: NAlan Cox <alan@redhat.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The two CONFIG variables

        CONFIG_ETRAX_IDE_CSE1_16_RESET
        CONFIG_ETRAX_IDE_CSP0_8_RESET

appear to have been dead since way back in 2.5.xx days:

http://www.linuxhq.com/kernel/v2.5/75/arch/cris/drivers/KconfigSigned-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Cc: Michael Starvik <starvik@axis.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

One card submitted by user.
Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Workaround for errata A308: turn down the UDMA mode and retry
the DMA command when the data lost condition is detected.

take2:
udma_filter() hook is used to limit ATAPI UDMA mode.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NAkira Iguchi <akira2.iguchi@toshiba.co.jp>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Move to using inline function variant of eieio instead of inline assmebly.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Cc: kou.ishizaki@toshiba.co.jp
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: use SECINITSID_NETMSG instead of SECINITSID_UNLABELED for NetLabel
  SELinux: enable dynamic activation/deactivation of NetLabel/SELinux enforcement

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Fix inode size update before data write in xfs_setattr
  [XFS] Allow punching holes to free space when at ENOSPC
  [XFS] Implement ->page_mkwrite in XFS.
  [FS] Implement block_page_mkwrite.

Manually fix up conflict with Nick's VM fault handling patches in
fs/xfs/linux-2.6/xfs_file.c
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, CONFIG_X86_CMPXCHG64 both enables boot-time checking of
the cmpxchg64b feature and enables compilation of the set_64bit() family.
Since the option is dependent on PAE, and since KVM depends on set_64bit(),
this effectively disables KVM on i386 nopae.

Simplify by removing the config option altogether: the boot check is made
dependent on CONFIG_X86_PAE directly, and the set_64bit() family is exposed
without constraints.  It is up to users to check for the feature flag (KVM
does not as virtualiation extensions imply its existence).
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.linux-nfs.org/pub/linux/nfs-2.6:
  NFSv4: handle lack of clientaddr in option string
  NFSv4: debug print ntohl(status) in nfs client callback xdr code
  SUNRPC: Clean up the sillyrename code
  NFS: Introduce struct nfs_removeargs+nfs_removeres
  NFS: Use dentry->d_time to store the parent directory verifier.
  SUNRPC: move bkl locking and xdr proc invocation into a common helper
  NFSv4: Fix the nfsv4 readlink reply buffer alignment
  NFSv4: Fix the readdir reply buffer alignment
  NFSv4: More NFSv4 xdr cleanups
  NFSv4: Try to recover from getfh failures in nfs4_xdr_dec_open
  NFSv4: 'constify' lookup arguments.
  NFSv4: Don't fail nfs4_xdr_dec_open if decode_restorefh() failed
  NFSv4: Fix open state recovery
  NFSD/SUNRPC: Fix the automatic selection of RPCSEC_GSS

With the new setup code, we generate a couple more files
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
[ .. and do the same for x86-64 - Alexey ]
Acked-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

83c54070 broke spufs by incorrectly
updating the code, this patch gets it to compile again.

It's probably still broken due to the scheduler changes, but this
at least makes sure cell kernels can still be built.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits)
  xtensa: use DATA_DATA in xtensa
  powerpc: add missing DATA_DATA to powerpc
  cris: use DATA_DATA in cris
  kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c
  kbuild: use -fno-optimize-sibling-calls unconditionally
  kconfig: reset generated values only if Kconfig and .config agree.
  kbuild: fix the warning when running make tags
  kconfig: strip 'CONFIG_' automatically in kernel configuration search
  kbuild: use POSIX BRE in headers install target
  Whitelist references from __dbe_table to .init
  modpost white list pattern adjustment
  kbuild: do section mismatch check on full vmlinux
  kbuild: whitelist references from variables named _timer to .init.text
  kbuild: remove hardcoded _logo names from modpost
  kbuild: remove hardcoded apic_es7000 from modpost
  kbuild: warn about references from .init.text to .exit.text
  kbuild: consolidate section checks
  kbuild: refactor code in modpost to improve maintainability
  kbuild: ignore section mismatch warnings originating from .note section
  kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it
  ...

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)
  i2c: Delete the i2c-isa pseudo bus driver
  hwmon: refuse to load abituguru driver on non-Abit boards
  hwmon: fix Abit Uguru3 driver detection on some motherboards
  hwmon/w83627ehf: Be quiet when no chip is found
  hwmon/w83627ehf: No need to initialize fan_min
  hwmon/w83627ehf: Export the thermal sensor types
  hwmon/w83627ehf: Enable VBAT monitoring
  hwmon/w83627ehf: Add support for the VID inputs
  hwmon/w83627ehf: Fix timing issues
  hwmon/w83627ehf: Add error messages for two error cases
  hwmon/w83627ehf: Convert to a platform driver
  hwmon/w83627ehf: Update the Kconfig entry
  make coretemp_device_remove() static
  hwmon: Add LM93 support
  hwmon: Improve the pwmN_enable documentation
  hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
  hwmon: Add support for newer uGuru's
  hwmon/f71805f: Add temperature-tracking fan control mode
  hwmon/w83627ehf: Preserve speed reading when changing fan min
  hwmon: fix detection of abituguru volt inputs
  ...

Manual fixup of trivial conflict in MAINTAINERS file

If root raised the default wakeup threshold over the size of the
output pool, the pool transfer function could overflow the stack with
RNG bytes, causing a DoS or potential privilege escalation.

(Bug reported by the PaX Team <pageexec@freemail.hu>)

Cc: Theodore Tso <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: ->fallocate() support

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  [PATCH] sched: implement cpu_clock(cpu) high-speed time source
  [PATCH] sched: fix the all pinned logic in load_balance_newidle()
  [PATCH] sched: fix newly idle load balance in case of SMT
  [PATCH] sched: sched_cacheflush is now unused

When a CONFIG_USER_NS=n and a user tries to unshare some namespace other
than the user namespace, the dummy copy_user_ns returns NULL rather than
the old_ns.

This value then gets assigned to task->nsproxy->user_ns, so that a
subsequent setuid, which uses task->nsproxy->user_ns, causes a NULL
pointer deref.

Fix this by returning old_ns.
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The slab and slob allocators already did this right, but slub would call
"get_object_page()" on the magic ZERO_SIZE_PTR, with all kinds of nasty
end results.

Noted by Ingo Molnar.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I suspect Christoph tested his code only in the NUMA configuration, for
the combination of SLAB+non-NUMA the zero-sized kmalloc's would not work.

Of course, this would only trigger in configurations where those zero-
sized allocations happen (not very common), so that may explain why it
wasn't more widely noticed.

Seen by by Andi Kleen under qemu, and there seems to be a report by
Michael Tsirkin on it too.

Cc: Andi Kleen <ak@suse.de>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement the cpu_clock(cpu) interface for kernel-internal use:
high-speed (but slightly incorrect) per-cpu clock constructed from
sched_clock().

This API, unused at the moment, will be used in the future by blktrace,
by the softlockup-watchdog, by printk and by lockstat.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

nr_moved is not the correct check for triggering all pinned logic. Fix
the all pinned logic in the case of load_balance_newidle().
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In the presence of SMT, newly idle balance was never happening for
multi-core and SMP domains (even when both the logical siblings are
idle).

If thread 0 is already idle and when thread 1 is about to go to idle,
newly idle load balance always think that one of the threads is not idle
and skips doing the newly idle load balance for multi-core and SMP
domains.

This is because of the idle_cpu() macro, which checks if the current
process on a cpu is an idle process. But this is not the case for the
thread doing the load_balance_newidle().

Fix this by using runqueue's nr_running field instead of idle_cpu(). And
also skip the logic of 'only one idle cpu in the group will be doing
load balancing' during newly idle case.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since Ingo's recent scheduler rewrite which was merged as commit
0437e109 sched_cacheflush is unused.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If a NFSv4 mount is attempted  with string based options, and the
option string doesn't contain a clientaddr= option, the kernel will
currently oops. Check for this situation and return a proper error.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

status in nfs client callback xdr code is passed in network order.
print it in host order for better readability.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix a couple of bugs:
 - Don't rely on the parent dentry still being valid when the call completes.
   Fixes a race with shrink_dcache_for_umount_subtree()

 - Don't remove the file if the filehandle has been labelled as stale.

Fix a couple of inefficiencies
 - Remove the global list of sillyrenamed files. Instead we can cache the
   sillyrename information in the dentry->d_fsdata
 - Move common code from unlink_setup/unlink_done into fs/nfs/unlink.c
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We need a common structure for setting up an unlink() rpc call in order to
fix the asynchronous unlink code.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will free up the d_fsdata field for other use.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since every invocation of xdr encode or decode functions takes the BKL now,
there's a lot of redundant lock_kernel/unlock_kernel pairs that we can pull
out into a common function.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Try harder to recover the open state if the server failed to return a
filehandle.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We can already easily recover from that inside _nfs4_proc_open().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that opendata->state is always initialised when we do state
recovery.

Ensure that we set the filehandle in the case where we're doing an
"OPEN_CLAIM_PREVIOUS" call due to a server reboot.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Bruce's patch broke the ability to compile RPCSEC_GSS as a module.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>