Since serpent_sse2_glue.c uses cryptd, CRYPTO_SERPENT_SSE2_X86_64 and
CRYPTO_SERPENT_SSE2_586 should be selecting CRYPTO_CRYPTD.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that serpent.c has been cleaned from checkpatch warnings,
we can do clean rename.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Do checkpatch fixes before rename to keep rename patch simple and clean.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

specifically, add these algorithm combinations:

authenc-hmac-md5-cbc-aes-caam
authenc-hmac-md5-cbc-des3_ede-caam
authenc-hmac-md5-cbc-des-caam
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some later SEC v3.x are equipped with a second IRQ line.
By correctly assigning IRQ affinity, this feature can be
used to increase performance on dual core parts, like the
MPC8572E and P2020E.

The existence of the 2nd IRQ is determined from the device
node's interrupt property.  If present, the driver remaps
two of four channels, which in turn makes those channels
trigger their interrupts on the 2nd line instead of the first.
To handle single- and dual-IRQ combinations efficiently,
talitos gets two new interrupt handlers and back-half workers.

[includes a fix to MCR_LO's address.]
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a reg member to the channel struct and use it to
access channels.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

talitos prints every algorithm it registers at module load time.
Algorithms are being added that make for an excessively noisy console
(latest HMACs patch makes an SEC 3.1 print 20 lines).
Instead, display the SEC h/w version number, and inform the
user of algorithm registration status in /proc/crypto, like so:

talitos ffe30000.crypto: fsl,sec3.1 algorithms registered in /proc/crypto
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add these hmac algorithms to talitos:
    hmac(md5),
    hmac(sha1),
    hmac(sha224),
    hmac(sha256),
    hmac(sha384),
    hmac(sha512).
These are all type ahash.
Signed-off-by: NLee Nipper <lee.nipper@gmail.com>

Fixed up to not register HMAC algorithms on sec2.0 devices.
Rationale (from Lee):

on an 8349E Rev1.1, there's a problem with hmac for any talitos
hmac sequence requiring an intermediate hash context (Pointer
DWORD 1); the result is an incorrect hmac.  An intermediate hash
context is required for something longer than (65536-blocksize),
and for other cases when update/finup/final are used inefficiently.
Interestingly, a normal hash (without hmac) works perfectly
when using an intermediate context.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

LRW/XTS patches for serpent-sse2 forgot to add this. CRYPTO_TFM_REQ_MAY_SLEEP
should be cleared as sleeping between kernel_fpu_begin()/kernel_fpu_end() is
not allowed.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch adds XTS support for serpent-sse2 by using xts_crypt(). Patch has been
tested with tcrypt and automated filesystem tests.

Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios):

Intel Celeron T1600 (x86_64) (fam:6, model:15, step:13):
size    xts-enc xts-dec
16B     0.98x   1.00x
64B     1.00x   1.01x
256B    2.78x   2.75x
1024B   3.30x   3.26x
8192B   3.39x   3.30x

AMD Phenom II 1055T (x86_64) (fam:16, model:10):
size    xts-enc xts-dec
16B     1.05x   1.02x
64B     1.04x   1.03x
256B    2.10x   2.05x
1024B   2.34x   2.35x
8192B   2.34x   2.40x

Intel Atom N270 (i586):
size    xts-enc xts-dec
16B     0.95x   0.96x
64B     1.53x   1.50x
256B    1.72x   1.75x
1024B   1.88x   1.87x
8192B   1.86x   1.83x
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch adds LRW support for serpent-sse2 by using lrw_crypt(). Patch has been
tested with tcrypt and automated filesystem tests.

Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios):

Benchmark results with tcrypt:

Intel Celeron T1600 (x86_64) (fam:6, model:15, step:13):
size    lrw-enc lrw-dec
16B     1.00x   0.96x
64B     1.01x   1.01x
256B    3.01x   2.97x
1024B   3.39x   3.33x
8192B   3.35x   3.33x

AMD Phenom II 1055T (x86_64) (fam:16, model:10):
size    lrw-enc lrw-dec
16B     0.98x   1.03x
64B     1.01x   1.04x
256B    2.10x   2.14x
1024B   2.28x   2.33x
8192B   2.30x   2.33x

Intel Atom N270 (i586):
size    lrw-enc lrw-dec
16B     0.97x   0.97x
64B     1.47x   1.50x
256B    1.72x   1.69x
1024B   1.88x   1.81x
8192B   1.84x   1.79x
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch adds i586/SSE2 assembler implementation of serpent cipher. Assembler
functions crypt data in four block chunks.

Patch has been tested with tcrypt and automated filesystem tests.

Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios):

Intel Atom N270:

size    ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec
16      0.95x   1.12x   1.02x   1.07x   0.97x   0.98x
64      1.73x   1.82x   1.08x   1.82x   1.72x   1.73x
256     2.08x   2.00x   1.04x   2.07x   1.99x   2.01x
1024    2.28x   2.18x   1.05x   2.23x   2.17x   2.20x
8192    2.28x   2.13x   1.05x   2.23x   2.18x   2.20x

Full output:
 http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-generic.txt
 http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-sse2.txt

Userspace test results:

Encryption/decryption of sse2-i586 vs generic on Intel Atom N270:
 encrypt: 2.35x
 decrypt: 2.54x

Encryption/decryption of sse2-i586 vs generic on AMD Phenom II:
 encrypt: 1.82x
 decrypt: 2.51x

Encryption/decryption of sse2-i586 vs generic on Intel Xeon E7330:
 encrypt: 2.99x
 decrypt: 3.48x
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler
functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations
in parallel to improve performance on out-of-order CPUs). Glue code is based
on one from AES-NI implementation, so requests from irq context are redirected
to cryptd.

v2:
 - add missing include of linux/module.h
   (appearently crypto.h used to include module.h, which changed for 3.2 by
    commit 7c926402)

Patch has been tested with tcrypt and automated filesystem tests.

Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios):

AMD Phenom II 1055T (fam:16, model:10):

size    ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec
16B     1.03x   1.01x   1.03x   1.05x   1.00x   0.99x
64B     1.00x   1.01x   1.02x   1.04x   1.02x   1.01x
256B    2.34x   2.41x   0.99x   2.43x   2.39x   2.40x
1024B   2.51x   2.57x   1.00x   2.59x   2.56x   2.56x
8192B   2.50x   2.54x   1.00x   2.55x   2.57x   2.57x

Intel Celeron T1600 (fam:6, model:15, step:13):

size    ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec
16B     0.97x   0.97x   1.01x   1.01x   1.01x   1.02x
64B     1.00x   1.00x   1.00x   1.02x   1.01x   1.01x
256B    3.41x   3.35x   1.00x   3.39x   3.42x   3.44x
1024B   3.75x   3.72x   0.99x   3.74x   3.75x   3.75x
8192B   3.70x   3.68x   0.99x   3.68x   3.69x   3.69x

Full output:
 http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt
 http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt
 http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt
 http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txtSigned-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix a typo in the Kconfig file help text.
Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We leak the crypto instance when we unregister an instance with
crypto_del_alg(). Therefore we introduce crypto_unregister_instance()
to unlink the crypto instance from the template's instances list and
to free the recources of the instance properly.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Apparently, NIST is tightening up its requirements for FIPS validation
with respect to RNGs. Its always been required that in fips mode, the
ansi cprng not be fed key and seed material that was identical, but
they're now interpreting FIPS 140-2, section AS07.09 as requiring that
the implementation itself must enforce the requirement. Easy fix, we
just do a memcmp of key and seed in fips_cprng_reset and call it a day.

v2: Per Neil's advice, ensure slen is sufficiently long before we
compare key and seed to avoid looking at potentially unallocated mem.

CC: Stephan Mueller <smueller@atsec.com>
CC: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch adds XTS support for twofish-x86_64-3way by using xts_crypt(). Patch has
been tested with tcrypt and automated filesystem tests.

Tcrypt benchmarks results (twofish-3way/twofish-asm speed ratios):

Intel Celeron T1600 (fam:6, model:15, step:13):

size    xts-enc xts-dec
16B     0.98x   1.00x
64B     1.14x   1.15x
256B    1.23x   1.25x
1024B   1.26x   1.29x
8192B   1.28x   1.30x

AMD Phenom II 1055T (fam:16, model:10):

size    xts-enc xts-dec
16B     1.03x   1.03x
64B     1.13x   1.16x
256B    1.20x   1.20x
1024B   1.22x   1.22x
8192B   1.22x   1.21x
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors for xts(twofish). These are generated from xts(twofish) test vectors.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors for xts(serpent). These are generated from xts(aes) test vectors.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add xts_crypt() function that can be used by cipher implementations that can
benefit from parallelized cipher operations.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

XTS has fixed blocksize of 16. Define XTS_BLOCK_SIZE and use in place of
crypto_cipher_blocksize().
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch adds LRW support for twofish-x86_64-3way by using lrw_crypt(). Patch has
been tested with tcrypt and automated filesystem tests.

Tcrypt benchmarks results (twofish-3way/twofish-asm speed ratios):

Intel Celeron T1600 (fam:6, model:15, step:13):

size	lrw-enc	lrw-dec
16B	0.99x	1.00x
64B	1.17x	1.17x
256B	1.26x	1.27x
1024B	1.30x	1.31x
8192B	1.31x	1.32x

AMD Phenom II 1055T (fam:16, model:10):

size	lrw-enc	lrw-dec
16B	1.06x	1.01x
64B	1.08x	1.14x
256B	1.19x	1.20x
1024B	1.21x	1.22x
8192B	1.23x	1.24x
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors for lrw(twofish). These are generated from lrw(aes) test vectors.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors for lrw(serpent). These are generated from lrw(aes) test vectors.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Export gf128mul table initialization routines and add lrw_crypt() function
that can be used by cipher implementations that can benefit from parallelized
cipher operations.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Split gf128mul initialization from setkey so that it can be used outside
lrw-module.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

LRW has fixed blocksize of 16. Define LRW_BLOCK_SIZE and use in place of
crypto_cipher_blocksize().
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

LRW module leaks child cipher memory when init_tfm() fails because of child
block size not being 16.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Rename module from serpent.ko to serpent_generic.ko and add module alias. This
is to allow assembler implementation to autoload on 'modprobe serpent'. Also
add driver_name and priority for serpent cipher.

CC: Dag Arne Osvik <osvik@ii.uib.no>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Serpent SSE2 assembler implementations only provide 4-way/8-way parallel
functions and need setkey and one-block encrypt/decrypt functions.

CC: Dag Arne Osvik <osvik@ii.uib.no>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test_acipher_speed for testing async block ciphers.

Also include tests for aes/des/des3/ede as these appear to have ablk_cipher
implementations available.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add new serpent tests for serpent_sse2 x86_64/i586 8-way/4-way code paths.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

.. with new name.  Because nothing says "really solid kernel release"
like naming it after an extinct animal that just happened to be in the
news lately.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
  ...

Mountpoint crossing is similar to following procfs symlinks - we do
not get ->d_revalidate() called for dentry we have arrived at, with
unpleasant consequences for NFS4.

Simple way to reproduce the problem in mainline:

    cat >/tmp/a.c <<'EOF'
    #include <unistd.h>
    #include <fcntl.h>
    #include <stdio.h>
    main()
    {
            struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1};
            if (fcntl(0, F_SETLK, &fl))
                    perror("setlk");
    }
    EOF
    cc /tmp/a.c -o /tmp/test

then on nfs4:

    mount --bind file1 file2
    /tmp/test < file1		# ok
    /tmp/test < file2		# spews "setlk: No locks available"...

What happens is the missing call of ->d_revalidate() after mountpoint
crossing and that's where NFS4 would issue OPEN request to server.

The fix is simple - treat mountpoint crossing the same way we deal with
following procfs-style symlinks.  I.e.  set LOOKUP_JUMPED...

Cc: stable@kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>