Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, the caller has to change the value of task->tk_priority if
it wants to select on which priority level the task will sleep.

This patch allows the caller to select a priority level at sleep time
rather than always using task->tk_priority.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow the number of available slots to grow with the TCP window size.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This throttles the allocation of new slots when the socket is busy
reconnecting and/or is out of buffer space.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Embed the necessary alias into the module rather than waiting for
someone to add it to /etc/modprobe.conf
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Somebody working on this code asked what the deal was with NFSv4, since
this comment notes that it's v2/v3's statelessness that requires
sillyrename.  Shouldn't hurt to document the answer.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is not part of an external ABI...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that the backchannel exports conform to the existing sunrpc
practice.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Change explicit references to CONFIG_NFS_V4_1 to implicit ones
Get rid of the unnecessary defines in backchannel_rqst.c and
bc_svc.c: the Makefile takes care of those dependency.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of
completely reinitialising the struct nfs_pageio_descriptor.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If an attempt to do pNFS fails, and we have to fall back to writing through
the MDS, then we may want to re-coalesce the requests that we already have
since the block size for the MDS read/writes may be different to that of
the DS read/writes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of looking up the rsize and wsize, the routines that generate the
RPC requests should really be using the pg_bsize, since that is what we
use when deciding whether or not to coalesce write requests...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and do the same for nfs_flush_multi/one.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Split them up into two parts: one which sets up the struct nfs_read/write_data,
the other which sets up the actual RPC call or pNFS call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we're writing back data, and the FLUSH_STABLE flag is set, then we
always want to use NFS_FILE_SYNC, since we're always in a situation where
we're doing page reclaim, and so we want to free up the page as quickly
as possible.

If we're in the FLUSH_COND_STABLE case, then we either want to use another
unstable write (if we have to do a commit anyway) or again, we want to
use NFS_FILE_SYNC because we know that we have no more pages to write
out.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Mark all deviceids established under an expired MDS clientid as invalid.
Stop all new i/o through DS and send through the MDS.
Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts
established under the expired MDS clientid.
Remove the MDS clientid deviceid and data servers reference
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since we take a reference to it, we really ought to pass the a pointer to
the layout header in the arguments instead of assuming that
NFS_I(inode)->layout will forever point to the correct object.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* Some leftovers from ancient times.
* This file will only define common types and client API.
  Remove server from comments

Signed-off-by: Boaz Harrosh <Boaz Harrosh bharrosh@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ask for whole file layouts. Until support for layout segments is fully
supported in the file layout code, discard non-whole file layouts.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The fact that the global device id cache holds a reference to the
nfs4_deviceid_node until it is invisible to rcu lookups implies that
we can always assume that the reference count is non-zero in
_find_get_deviceid.

Also clean up nfs4_put_deviceid_node and the removal of the device id
from the cache.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we always get a layout before setting up the i/o request.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We need to ensure that the layouts are set up before we can decide to
coalesce requests. To do so, we want to further split up the struct
nfs_pageio_descriptor operations into an initialisation callback, a
coalescing test callback, and a 'do i/o' callback.

This patch cleans up the existing callback methods before adding the
'initialisation' callback.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When recovering open files and locks, the stateid should be tested
against the server and freed if it is invalid.  This patch adds new
recovery functions for NFS v4.1.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

FREE_STATEID is used to tell the server that we want to free a stateid
that no longer has any locks associated with it.  This allows the client
to reclaim locks without encountering edge conditions documented in
section 8.4.3 of RFC 5661.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch adds in the xdr for doing a TEST_STATEID call with a single
stateid. RFC 5661 allows multiple stateids to be tested in a single
call, but only testing one keeps things simpler for now.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the client is using NFS v4.1, then we can use SECINFO_NO_NAME to find
the secflavor for the initial mount.  If the server doesn't support
SECINFO_NO_NAME then I fall back on the "guess and check" method used
for v4.0 mounts.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Layouts should be tracked per nfs_server (aka superblock)
instead of per struct nfs_client, which may have multiple FSIDs associated
with it.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We support IPv4 and IPv6 now.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

can be skipped if the "eir_server_scope" from the exchange_id proc differs from
previous calls.

Also, in the future server_scope will be useful for determining whether client
trunking is available
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't just use the first addr in the multipath list - instead, loop
over addresses when calling nfs4_set_ds_client() (which calls connect)
until it is successful.

Although this is not real multipath support, it's a quick fix to handle when
an MDS sends a list of addresses for a DS and some of the addr families are
unsupported or misconfigured (like no routable ipv6 addr assigned).
This will attempt all paths to the DS before giving up, instead of immediately
falling back to the MDS.

As before, an error encountered after a successful connect() will cause all
i/o to fall back to the MDS.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This parses and stores all addresses associated with each data server,
laying the groundwork for supporting multipath to data servers.

 - Skips over addresses that cannot be parsed (ie IPv6 addrs if v6 is not
   enabled).  Only fails if none of the addresses are recognizable
 - Currently only uses the first address that parsed cleanly
 - Tested against pynfs server (modified to support multipath)
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Handle ipv6 remote addresses from GETDEVICEINFO

 - supports netid "tcp" for ipv4 and "tcp6" for ipv6 as rfc 5665 specifies
 - added ds_remotestr to avoid having to handle different AFs in every dprintk
 - tested against pynfs 4.1 server, submitting ipv6 support patch to pynfs
 - tested with IPv6 disabled, it compiles cleanly and relies on rpc_pton to
   refuse to accept IPv6 addresses
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

lockd: server returns status 50331648
it's quite hard to understand that number in this message is 3 in big endian
Signed-off-by: NVasily Averin <vvs@sw.ru>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>