Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 11 1月, 2006 5 次提交
    • A
      [PATCH] TTY layer buffering revamp · 33f0f88f
      由 Alan Cox 提交于 
      The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.

This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.

When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.

For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).

Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.

The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.

I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.

Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real.  That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.

Description:

tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification].  It
does now also return the number of chars inserted

There are also

tty_buffer_request_room(tty, len)

which asks for a buffer block of the length requested and returns the space
found.  This improves efficiency with hardware that knows how much to
transfer.

and tty_insert_flip_string_flags(tty, str, flags, len)

to insert a string of characters and flags

For a smart interface the usual code is

    len = tty_request_buffer_room(tty, amount_hardware_says);
    tty_insert_flip_string(tty, buffer_from_card, len);

More description!

At the moment tty buffers are attached directly to the tty.  This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)

I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers.  This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.

So far so good.  Lots of drivers reference tty->flip.*.  Several of them also
call directly and unsafely into function pointers it provides.  This will all
break.  Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.

At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say

 int tty_buffer_request_room(tty, size)

Try and ensure at least size bytes are available, returns actual room (may be
zero).  At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative.  (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space.  The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.

 int tty_insert_flip_char(tty, ch, flag)

As before insert a character if there is room.  Now returns 1 for success, 0
for failure.

 int tty_insert_flip_string(tty, str, len)

Insert a block of non error characters.  Returns the number inserted.

 int tty_prepare_flip_string(tty, strptr, len)

Adjust the buffer to allow len characters to be added.  Returns a buffer
pointer in strptr and the length available.  This allows for hardware that
needs to use functions like insl or mencpy_fromio.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      33f0f88f
    • C
      [PATCH] don't include ioctl32.h in drivers · 7ff92053
      由 Christoph Hellwig 提交于 
      These days ioctl32.h is only used for communication of fs/compat.c and
fs/compat_ioctl.c and doesn't contain anything of interest to drivers.

Remove inclusion in various drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      7ff92053
    • C
      [PATCH] add ->compat_ioctl to dasd · 8262037f
      由 Christoph Hellwig 提交于 
      Add a compat_ioctl method to the dasd driver so the last entries in
arch/s390/kernel/compat_ioctl.c can go away.  Unlike the previous attempt this
one does not replace the ioctl method with an unlocked_ioctl method so that
the ioctl_by_bdev calls in s390 partition code continue to work.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      8262037f
    • C
      [PATCH] ->compat_ioctl for 390 tape_char · f042e0f8
      由 Christoph Hellwig 提交于 
      The only own ioctl, TAPE390_DISPLAY, is compat_clean, everything else is
routed through common translation code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      f042e0f8
    • C
      [PATCH] switch fs3270 to ->compat_ioctl · 0f75e00c
      由 Christoph Hellwig 提交于 
      Again easy because all ioctls are compat clean.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      0f75e00c
  3. 09 1月, 2006 1 次提交
    • C
      [PATCH] Add block_device_operations.getgeo block device method · a885c8c4
      由 Christoph Hellwig 提交于 
      HDIO_GETGEO is implemented in most block drivers, and all of them have to
duplicate the code to copy the structure to userspace, as well as getting
the start sector.  This patch moves that to common code [1] and adds a
->getgeo method to fill out the raw kernel hd_geometry structure.  For many
drivers this means ->ioctl can go away now.

[1] the s390 block drivers are odd in this respect.  xpram sets ->start
    to 4 always which seems more than odd, and the dasd driver shifts
    the start offset around, probably because of it's non-standard
    sector size.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@suse.de>
Cc: <mike.miller@hp.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      a885c8c4
  5. 07 1月, 2006 16 次提交
  7. 06 1月, 2006 1 次提交
    • T
      [BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn() · 8ffdc655
      由 Tejun Heo 提交于 
      add @uptodate argument to end_that_request_last() and @error
to rq_end_io_fn().  there's no generic way to pass error code
to request completion function, making generic error handling
of non-fs request difficult (rq->errors is driver-specific and
each driver uses it differently).  this patch adds @uptodate
to end_that_request_last() and @error to rq_end_io_fn().

for fs requests, this doesn't really matter, so just using the
same uptodate argument used in the last call to
end_that_request_first() should suffice.  imho, this can also
help the generic command-carrying request jens is working on.
Signed-off-by: Ntejun heo <htejun@gmail.com>
Signed-Off-By: NJens Axboe <axboe@suse.de>
      8ffdc655
  9. 05 1月, 2006 2 次提交
  11. 24 12月, 2005 3 次提交
    • F
      [PATCH] s390: remove redundant and useless code in qeth · 3df3cc6d
      由 Frank Pavlic 提交于 
      [patch 3/3] s390: remove redundant and useless code in qeth

From: Frank Pavlic <pavlic@de.ibm.com>
	- remove redundant and useless code in qeth for
	  procfs operations.
	- update Revision numbers
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_main.c |    6 -
 qeth_mpc.c  |    2
 qeth_mpc.h  |    2
 qeth_proc.c |  250 ++++++------------------------------------------------------
 qeth_sys.c  |    4
 qeth_tso.h  |    4
 6 files changed, 38 insertions(+), 230 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
      3df3cc6d
    • F
      [PATCH] s390: minor qeth network driver fixes · 4965e97f
      由 Frank Pavlic 提交于 
      [patch 2/3] s390: minor qeth network driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- use netif_carrier_on/off calls to tell network stack
	  link carrier state
	- fix possible kfree on NULL
	- PDU_LEN2 is at offset 0x29 otherwise OSN chpid won't initialize
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_eddp.c |    3 ++-
 qeth_main.c |   17 +++++++----------
 qeth_mpc.h  |    2 +-
 3 files changed, 10 insertions(+), 12 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
      4965e97f
    • F
      [PATCH] s390: some minor qeth driver fixes · 6c6b3e7c
      由 Frank Pavlic 提交于 
      [patch 1/3] s390: some minor qeth driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- let's have just one function for both ,input and output queue
	  to check qdio errors
	- add /proc/s390dbf/qeth_qerr entries for outbound processing
	- check removed for layer2 device in qeth_add_multicast_ipv6
	- NULL pointer dereference with bonding and VLAN device fixed
	- minimum length check for portname fixed
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>

diffstat:
qeth_main.c |   42 +++++++++++++++++++++---------------------
qeth_sys.c  |    6 +++---
2 files changed, 24 insertions(+), 24 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
      6c6b3e7c
  13. 02 12月, 2005 4 次提交
  15. 18 11月, 2005 1 次提交
  17. 11 11月, 2005 7 次提交