Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

So that we don't get build failures once the implicit module.h
presence is removed.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

It may not be necessary to fail in certain cases (such as failing to idle)
on module unload, whereas on suspend it's important to ensure a consistent
state can be restored on resume.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The ability to use NVIDIA's fuc has been retained *temporarily* in order
to better debug any issues that may be lingering in our initial attempt
at writing this ucode.  Once I'm fairly confident we're okay, it'll be
removed.

There's a number of things not implemented by this fuc currently, but
most of it is sets of state that our context setup would not have used
anyway.  No doubt we'll find out what they're for at some point, and
implement it if required.

This has been tested on 0xc0/0xc4 thus far, and from what I could tell
it worked as well as NVIDIA's.  It's also been tested on 0xc1, but even
with NVIDIA's fuc that chipset doesn't work correctly with nouveau yet.

0xc3/0xc8/0xce should in theory be supported too, but I don't have the
hardware to check that.

There's no doubt numerous bugs to squash yet, please report any!
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Until we know these should work properly, would much rather default to
noaccel than risk giving people corruption/hangs out of the box..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This needs a massive cleanup, but to catch bugs from the interface changes
vs the engine code cleanup, this will be done later.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There's lots of more-or-less independant engines present on NVIDIA GPUs
these days, and we generally want to perform the same operations on them.
Implementing new ones requires hooking into lots of different places,
the aim of this work is to make this simpler and cleaner.

NV84:NV98 PCRYPT moved over as a test.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This abstracts the pci/platform interface out a step further,
we can go further but this is far enough for now to allow USB
to be plugged in.

The drivers now just call the init code directly for their
device type.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The -rt patches change the console_semaphore to console_mutex.  As a
result, a quite large chunk of the patches changes all
acquire/release_console_sem() to acquire/release_console_mutex()

This commit makes things use more neutral function names which dont make
implications about the underlying lock.

The only real change is the return value of console_trylock which is
inverted from try_acquire_console_sem()

This patch also paves the way to switching console_sem from a semaphore to
a mutex.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert]
Signed-off-by: NTorben Hohn <torbenh@gmx.de>
Cc: Thomas Gleixner <tglx@tglx.de>
Cc: Greg KH <gregkh@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to track the state of the switch in drivers, so that after s/r
we don't resume the card we've explicitly switched off before. Also
don't allow a userspace open to occur if we've switched the gpu off.
Signed-off-by: NDave Airlie <airlied@redhat.com>

As of this commit, it's guaranteed that if an object is in VRAM that its
GPU virtual address will be constant.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There have been reports of PFIFO cache errors during context take down
(fdo bug 31637). They are caused by some GPU objects being taken out
while the channel is still potentially processing commands. Make sure
that all the previous rendering has landed before releasing a GPU
object.
Reported-by: NGrzesiek Sójka <pld@pfu.pl>
Reported-by: NPatrice Mandin <patmandin@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_fence_* functions are not type safe, which could lead to bugs.
Additionally every use of nouveau_fence_unref had to cast struct
nouveau_fence to void **.
Fix it by renaming old functions and creating static inline functions with
new prototypes. We still need old functions, because we pass function
pointers to ttm.
As we are wrapping functions, drop unused "void *arg" parameter where possible.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Only supported on NV50+ so far, and disabled by default currently.  The
module parameter "msi=1" will enable it.

There's a kernel bug which will cause this to fail if the module (or the
NVIDIA binary driver) has ever been loaded before loading nouveau with
MSI enabled.  As such, this is only safe to enable if you have nouveau
load on boot, and don't wish to ever reload it.

The workaround is to "echo 0 > /sys/bus/pci/devices/<device>/enable"
until the enable count reads 0.  Then you should be able to load nouveau
with MSI enabled.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Guarded by a module parameter for the moment, read the code for the
magic value which enables it.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The drm device drivers currently allow seeking on the
character device but never care about the actual
file position.

When we change the default llseek operation to be
no_llseek, calling llseek on a drm device would
return an error condition, which is an API change.

Explicitly setting noop_llseek lets us keep the
current API.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org

Every driver used the default implementation. Fold that one into
the only callsite and drop the callback.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

All drivers happily copy&pasted the default implementation without
checking whether this callback is used at all. It's not. Sigh.

Kill it.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

BIOS scripts usually make an attempt to reset the AGP controller,
however on some nv4x cards doing it properly involves switching FW off
and on: if we do that without updating the AGP bridge settings
accordingly (e.g. with the corresponding calls to agp_enable()) we
will be locking ourselves out of the card MMIO space. Do it from
nouveau_mem_reset_agp() before the init scripts are executed.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Locking only makes sense in the VBIOS parsing code as it's executed
before CRTC init.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This was always really a developer option, and if it's really necessary we
can hack this in ourselves.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

It's far preferable to have the driver do nothing at all for "nomodeset".
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allow platform devices without PCI resources to be DRM devices.

[airlied: fixup warnings with dev pointers]
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- This isn't triggered yet on a normal kernel, because it still does a VT
switch, but it seemed like a good idea to fix this now.
Tested-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>