Nothing inside the idle worker now requires struct_mutex, so we can
remove the indirection of using our own worker.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-9-chris@chris-wilson.co.uk

We don't need to hold struct_mutex now for retiring requests, so drop it
from i915_retire_requests() and i915_gem_wait_for_idle(), finally
removing I915_WAIT_LOCKED for good.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-8-chris@chris-wilson.co.uk

Forgo the struct_mutex serialisation for i915_active, and interpose its
own mutex handling for active/retire.

This is a multi-layered sleight-of-hand. First, we had to ensure that no
active/retire callbacks accidentally inverted the mutex ordering rules,
nor assumed that they were themselves serialised by struct_mutex. More
challenging though, is the rule over updating elements of the active
rbtree. Instead of the whole i915_active now being serialised by
struct_mutex, allocations/rotations of the tree are serialised by the
i915_active.mutex and individual nodes are serialised by the caller
using the i915_timeline.mutex (we need to use nested spinlocks to
interact with the dma_fence callback lists).

The pain point here is that instead of a single mutex around execbuf, we
now have to take a mutex for active tracker (one for each vma, context,
etc) and a couple of spinlocks for each fence update. The improvement in
fine grained locking allowing for multiple concurrent clients
(eventually!) should be worth it in typical loads.

v2: Add some comments that barely elucidate anything :(
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-6-chris@chris-wilson.co.uk

As we need to use a mutex to serialise i915_active activation
(because we want to allow the callback to sleep), we need to push the
i915_active.retire into a worker callback in case we get need to retire
from an atomic context.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-5-chris@chris-wilson.co.uk

Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the
shrinker (we require unbinding from inside fs-reclaim) and so we cannot
allocate while holding that mutex. Instead we have to preallocate
workers to do allocate and apply the PTE updates after we have we
reserved their slot in the drm_mm (using fences to order the PTE writes
with the GPU work and with later unbind).

In adding the asynchronous vma binding, one subtle requirement is to
avoid coupling the binding fence into the backing object->resv. That is
the asynchronous binding only applies to the vma timeline itself and not
to the pages as that is a more global timeline (the binding of one vma
does not need to be ordered with another vma, nor does the implicit GEM
fencing depend on a vma, only on writes to the backing store). Keeping
the vma binding distinct from the backing store timelines is verified by
a number of async gem_exec_fence and gem_exec_schedule tests. The way we
do this is quite simple, we keep the fence for the vma binding separate
and only wait on it as required, and never add it to the obj->resv
itself.

Another consequence in reducing the locking around the vma is the
destruction of the vma is no longer globally serialised by struct_mutex.
A natural solution would be to add a kref to i915_vma, but that requires
decoupling the reference cycles, possibly by introducing a new
i915_mm_pages object that is own by both obj->mm and vma->pages.
However, we have not taken that route due to the overshadowing lmem/ttm
discussions, and instead play a series of complicated games with
trylocks to (hopefully) ensure that only one destruction path is called!

v2: Add some commentary, and some helpers to reduce patch churn.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-4-chris@chris-wilson.co.uk

The premise here is to simply avoiding having to acquire the vm->mutex
inside vma create/destroy to update the vm->unbound_lists, to avoid some
nasty lock recursions later.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-2-chris@chris-wilson.co.uk

For selftests, we desire repeatability and so prefer using a prng with
known seed over true randomness. Extract random_offset() as a selftest
utility that can take the prng state.
Suggested-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002122430.23205-1-chris@chris-wilson.co.uk

On systems that have no runtime-pm, we mark the wakeref as being -1. We
therefore cannot use that value for the mock-gt indicator, so opt for
-ENODEV instead. The wakeref should never be an error value -- one
hopes!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-2-chris@chris-wilson.co.uk

Continuing the theme of breaking intel_pm.c up in a reasonable chunk of
powermanagement utilities, pull out the rc6 setup into its GT handler.

Based on a patch by Chris Wilson.
Signed-off-by: NAndi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919143840.20384-1-andi.shyti@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190927110849.28734-1-chris@chris-wilson.co.uk

The simplest and most maximal submission we can do, a thread to submit
requests unto each engine.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925193446.26007-1-chris@chris-wilson.co.uk

Before we submit the first context to HW, we need to construct a valid
image of the register state. This layout is defined by the HW and should
match the layout generated by HW when it saves the context image.
Asserting that this should be equivalent should help avoid any undefined
behaviour and verify that we haven't missed anything important!

Of course, having insisted that the initial register state within the
LRC should match that returned by HW, we need to ensure that it does.

v2: Drop the RELATIVE_MMIO flag from gen11, we ignore it for
constructing the lrc image.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924145950.3011-1-chris@chris-wilson.co.uk

The request->timeline is only valid until the request is retired (i.e.
before it is completed). Upon retiring the request, the context may be
unpinned and freed, and along with it the timeline may be freed. We
therefore need to be very careful when chasing rq->timeline that the
pointer does not disappear beneath us. The vast majority of users are in
a protected context, either during request construction or retirement,
where the timeline->mutex is held and the timeline cannot disappear. It
is those few off the beaten path (where we access a second timeline) that
need extra scrutiny -- to be added in the next patch after first adding
the warnings about dangerous access.

One complication, where we cannot use the timeline->mutex itself, is
during request submission onto hardware (under spinlocks). Here, we want
to check on the timeline to finalize the breadcrumb, and so we need to
impose a second rule to ensure that the request->timeline is indeed
valid. As we are submitting the request, it's context and timeline must
be pinned, as it will be used by the hardware. Since it is pinned, we
know the request->timeline must still be valid, and we cannot submit the
idle barrier until after we release the engine->active.lock, ergo while
submitting and holding that spinlock, a second thread cannot release the
timeline.

v2: Don't be lazy inside selftests; hold the timeline->mutex for as long
as we need it, and tidy up acquiring the timeline with a bit of
refactoring (i915_active_add_request)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-1-chris@chris-wilson.co.uk

Check that we are correctly invalidating the TLB at the start of a
batch after updating the GTT.

v2: Comments and hold the request reference while spinning
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919131414.7495-1-chris@chris-wilson.co.uk

The media ranges extend beyond what gen11 gives so we can't piggypack
on gen11 ranges, even on read side.

Introduce a table for gen12 and accessors for it.

v2: correctly implement gen12_fwtable_write/read (Daniele)
v3: update with ranges from bspec.
v4: avoid GEN11_NEEDS_FORCEWAKE (Mika)
v5: bspec ref (Daniele)

BSpec: 52078
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913141652.27958-2-mika.kuoppala@linux.intel.com

In preparation for reducing struct_mutex stranglehold around the vm,
make the vma.flags atomic so that we can acquire a pin on the vma
atomically before deciding if we need to take the mutex.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911090243.16786-1-chris@chris-wilson.co.uk

Code in i915_gem_init_hw is all about GT init so move it to intel_gt.c
renaming to intel_gt_init_hw.

Existing intel_gt_init_hw is renamed to intel_gt_init_hw_early since it
is currently called from driver probe.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-2-tvrtko.ursulin@linux.intel.com

Being a "low-level" test, we opt to bypass the normal bind/unbind hooks
for the lower level insert_entries/clear_range. For ggtt, the
bind/unbind hooks provide the runtime wakeref and so we must also handle
this in exercising the low level hooks.

<4> [538.151672] RPM raw-wakeref not held
<4> [538.151825] WARNING: CPU: 0 PID: 11 at ./drivers/gpu/drm/i915/intel_runtime_pm.h:107 fwtable_read32+0x1be/0x300 [i915]
<4> [538.151830] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp btusb btrtl btbcm x86_pkg_temp_thermal coretemp btintel crct10dif_pclmul bluetooth crc32_pclmul snd_intel_nhlt snd_hda_codec ecdh_generic ghash_clmulni_intel ecc snd_hwdep snd_hda_core lpc_ich r8169 realtek snd_pcm mei_me mei prime_numbers pinctrl_broxton pinctrl_intel [last unloaded: i915]
<4> [538.151861] CPU: 0 PID: 11 Comm: migration/0 Tainted: G     U            5.3.0-rc7-CI-Trybot_4938+ #1
<4> [538.151864] Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0056.2018.0926.1100 09/26/2018
<4> [538.151960] RIP: 0010:fwtable_read32+0x1be/0x300 [i915]
<4> [538.151965] Code: e8 e7 f9 5f e0 e9 0b ff ff ff 80 3d d5 8d 26 00 00 0f 85 81 fe ff ff 48 c7 c7 ef 01 bd a0 c6 05 c1 8d 26 00 01 e8 b2 e4 6a e0 <0f> 0b e9 67 fe ff ff 80 3d ad 8d 26 00 00 0f 85 65 fe ff ff 48 c7
<4> [538.151969] RSP: 0018:ffffc9000007be10 EFLAGS: 00010086
<4> [538.151972] RAX: 0000000000000000 RBX: ffff88826be10d50 RCX: 0000000000000002
<4> [538.151975] RDX: 0000000080000002 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [538.151978] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
<4> [538.151981] R10: 0000000000000000 R11: ffffc9000007bcb0 R12: 0000000000101008
<4> [538.151984] R13: 0000000000000000 R14: ffffc9000036f638 R15: 0000000000000002
<4> [538.151987] FS:  0000000000000000(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
<4> [538.151990] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [538.151993] CR2: 00007fd48e7052f8 CR3: 0000000005210000 CR4: 00000000003406f0
<4> [538.151995] Call Trace:
<4> [538.152106]  bxt_vtd_ggtt_clear_range__cb+0x38/0x40 [i915]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-2-chris@chris-wilson.co.uk

As soon as we re-enable the various functions within the HW, they may go
off and read data via a GGTT offset. Hence, if we have not yet restored
the GGTT PTE before then, they may read and even *write* random locations
in memory.

Detected by DMAR faults during resume.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk

Try to tidy up the cache-coloring such that we rid the code of any
mm.color_adjust assumptions, this should hopefully make it more obvious
in the code when we need to actually use the cache-level as the color,
and as a bonus should make adding a different color-scheme simpler.
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-3-matthew.auld@intel.com

Make it clear that the color adjust callback applies to the ggtt.
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-2-matthew.auld@intel.com

Refactor the GT power management interface to work through the GT now
that it is under the control of gt/

Based on a patch by Chris Wilson.
Signed-off-by: NAndi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905111403.10071-1-andi.shyti@intel.com

The sg_table for our backing store might contain addresses from
stolen-memory or in the future local-memory, at which point this is no
longer a dma-iterator. As a consequence we should now break on NULL
iter.sgp, instead of dmap == 0 which is considered an invalid dma
address.

As a bonus, gcc much prefers this construct,

  Function                                     old     new   delta
  gen8_ggtt_insert_entries                     211     192     -19
  gen6_ggtt_insert_entries                     292     262     -30
  i915_error_object_create                     996     954     -42
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829201919.21493-1-matthew.auld@intel.com

Let the scheduler have a breather in between passes of the longer buddy
tests. Important if we are running under kasan etc and this takes far
longer than usual!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829170848.969-1-chris@chris-wilson.co.uk

In commit 70d6894d ("drm/i915: Serialize against vma moves")
I managed to miss a couple of i915_vma_move_to_active() that had not
serialised against an async vma pinning. Add the missing
i915_request_await.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821193851.18232-1-chris@chris-wilson.co.uk

Make sure that when submitting requests, we always serialize against
potential vma moves and clflushes.

Time for a i915_request_await_vma() interface!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819112033.30638-1-chris@chris-wilson.co.uk

Errors spread like wildfire, and must eventually be returned to the
user. They need to be captured and passed along the flow of fences,
infecting each in turn with the existing error, until finally they fall
out of a user visible result.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817232511.11391-1-chris@chris-wilson.co.uk

As every i915_active_request should be serialised by a dedicated lock,
i915_active consists of a tree of locks; one for each node. Markup up
the i915_active_request with what lock is supposed to be guarding it so
that we can verify that the serialised updated are indeed serialised.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816121000.8507-2-chris@chris-wilson.co.uk

Dan reported the following static checker warning:

drivers/gpu/drm/i915/selftests/i915_buddy.c:670 igt_buddy_alloc_range()
error: we previously assumed 'block' could be null (see line 665)
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815103210.11802-1-matthew.auld@intel.com

Simple buddy allocator. We want to allocate properly aligned
power-of-two blocks to promote usage of huge-pages for the GTT, so 64K,
2M and possibly even 1G. While we do support allocating stuff at a
specific offset, it is more intended for preallocating portions of the
address space, say for an initial framebuffer, for other uses drm_mm is
probably a much better fit. Anyway, hopefully this can all be thrown
away if we eventually move to having the core MM manage device memory.
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809202926.14545-2-matthew.auld@intel.com

Move the timeline from being inside the intel_ring to intel_context
itself. This saves much pointer dancing and makes the relations of the
context to its timeline much clearer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-4-chris@chris-wilson.co.uk

As we need to acquire a mutex to serialise the final
intel_wakeref_put, we need to ensure that we are in process context at
that time. However, we want to allow operation on the intel_wakeref from
inside timer and other hardirq context, which means that need to defer
that final put to a workqueue.

Inside the final wakeref puts, we are safe to operate in any context, as
we are simply marking up the HW and state tracking for the potential
sleep. It's only the serialisation with the potential sleeping getting
that requires careful wait avoidance. This allows us to retain the
immediate processing as before (we only need to sleep over the same
races as the current mutex_lock).

v2: Add a selftest to ensure we exercise the code while lockdep watches.
v3: That test was extremely loud and complained about many things!
v4: Not a whale!

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111295
References: https://bugs.freedesktop.org/show_bug.cgi?id=111245
References: https://bugs.freedesktop.org/show_bug.cgi?id=111256
Fixes: 18398904 ("drm/i915: Only recover active engines")
Fixes: 51fbd8de ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808202758.10453-1-chris@chris-wilson.co.uk

Grr, missed one*. For using the legacy engine map, we should use
engine->legacy_idx. Ideally, we should know the intel_context in the
selftest and avoid all the fiddling around with unwanted GEM contexts.

* In my defence, the conflict was added in another patch after it was
tested by CI.

v2: mock engines needs legacy love as well

Fixes: f1c4d157 ("drm/i915: Fix up the inverse mapping for default ctx->engines[]")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808194525.9410-2-chris@chris-wilson.co.uk

Modernise the mock_request factory to take intel_context not a (GEM
context, intel_engine_cs) tuple.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808115640.20552-1-chris@chris-wilson.co.uk

As we store a pointer to i915 in the drvdata field (as the pointer is both
an alias to the drm_device and drm_i915_private), we can use the stored
pointer directly as the i915 device.

v2: Store and use i915 inside drv_get_drvdata()
v3: Only expect i915 inside drv_get_drvdata() so drop the assumed
i915/drm equivalence.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806074219.11043-1-chris@chris-wilson.co.uk

By placing our idle-barriers in the i915_active fence tree, we expose
those for reuse by other components that are issuing requests along the
kernel_context. Reusing the proto-barrier active_node is perfectly fine
as the new request implies a context-switch, and so an opportune point
to run the idle-barrier. However, the proto-barrier is not equivalent
to a normal active_node and care must be taken to avoid dereferencing the
ERR_PTR used as its request marker.

v2: Comment the more egregious cheek
v3: A glossary!
Reported-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: ce476c80 ("drm/i915: Keep contexts pinned until after the next kernel context switch")
Fixes: a9877da2 ("drm/i915/oa: Reconfigure contexts on the fly")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802100015.1281-1-chris@chris-wilson.co.uk

Teach igt_spinner to only use our internal structs, decoupling the
interface from the GEM contexts. This makes it easier to avoid
requiring ce->gem_context back references for kernel_context that may
have them in future.

v2: Lift engine lock to verify_wa() caller.
v3: Less than v2, but more so
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731081126.9139-1-chris@chris-wilson.co.uk

Give the scheduler a chance to breathe by calling cond_resched() as some
of the loops may take some time on slower machines, and so catch the
attention of the watchdogs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111196Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723095800.2820-1-chris@chris-wilson.co.uk

Maxime didn't really compile-test this :-/

We need to re-apply

commit e4fa8457
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jun 14 22:35:25 2019 +0200

    drm/prime: Align gem_prime_export with obj_funcs.export

plus make sure i915_gem_dma_buf.c doesn't get zombie-resurrect. It
moved in

commit 10be98a7
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue May 28 10:29:49 2019 +0100

    drm/i915: Move more GEM objects under gem/

v2: Remember the selftests (Chris).

Fixes: 03b0f2ce ("Merge v5.3-rc1 into drm-misc-next")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722213759.26612-1-daniel.vetter@ffwll.ch

Both microcontrollers are part of the GT HW and are closely related to
GT operations. To keep all the files cleanly together, they've been
placed in their own subdir inside the gt/ folder
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-6-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Having taken the first step in encapsulating the functionality by moving
the related files under gt/, the next step is to start encapsulating by
passing around the relevant structs rather than the global
drm_i915_private. In this step, we pass intel_gt to intel_reset.c
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk