It again looks all cargo-culted for no good reasons.

Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-13-daniel.vetter@ffwll.ch

It doesn't do anything in the driver load error paths that the drm
core doesn't also do (cleanup is done in drm_dev_fini).

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-10-daniel.vetter@ffwll.ch

VBLANK events are missed when the CRTC is being disabled because the
driver does not wait till the end of the frame before stopping the
HVS and PV blocks. In this case, we should explicitly issue a VBLANK
event if there's one waiting.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1497601833-24588-1-git-send-email-boris.brezillon@free-electrons.com

I've failed to remember that we have virtual drivers like vgem which
have no underlying struct device. Fix this asap.
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Fixes: 5c484cee ("drm: Remove drm_driver->set_busid hook")
Cc: Thierry Reding <treding@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621130429.20537-1-daniel.vetter@ffwll.ch

Undo preparation of a clock source, if sti_hqvdp_start_xp70 and
sti_hqvdp_atomic_check are not successful.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/7afad3012fb6e40f43a1eb5a64dc6364c38bd052.1498039961.git.arvind.yadav.cs@gmail.com

The expression &private->fbdev_helper can never be NULL, so the check is
completely unnecessary.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329144401.1804-12-thierry.reding@gmail.com

drm_fbdev_cma_hotplug_event() already checks for NULL pointers before
dereferencing, so callers don't need to do that.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329144401.1804-11-thierry.reding@gmail.com

of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   8836	    744	      0	   9580	   256c	drivers/gpu/drm/armada/armada_crtc.o

File size after constify armada_lcd_of_match:
   text	   data	    bss	    dec	    hex	filename
   9220	    328	      0	   9548	   254c	drivers/gpu/drm/armada/armada_crtc.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/ff9a9a908cf347775ab62cfadfde986de72dcf13.1497935382.git.arvind.yadav.cs@gmail.com

drm_fbdev_cma_set_suspend{,_unlocked} use an integer parameter
to describe whether the intended state is a suspend or a resume.
It then passes the value to drm_fb_helper_set_suspend{,_unlocked}
which uses a boolean. Switch to using bool everywhere.
Signed-off-by: NLiviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620102320.8849-1-Liviu.Dudau@arm.com

of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  15845	    640	      0	  16485	   4065	drivers/gpu/drm/sti/sti_hqvdp.o

File size after constify hqvdp_of_match:
   text	   data	    bss	    dec	    hex	filename
  16229	    224	      0	  16453	   4045	drivers/gpu/drm/sti/sti_hqvdp.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/0a6ae44cf7d0fb54380809ae0e52234dbd3f367a.1497934979.git.arvind.yadav.cs@gmail.com

of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   4222	    664	      0	   4886	   1316	drivers/gpu/drm/sti/sti_dvo.o

File size after constify dvo_of_match:
   text	   data	    bss	    dec	    hex	filename
   4638	    248	      0	   4886	   1316	drivers/gpu/drm/sti/sti_dvo.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/d5ac3cb4c43338419308d658b9bcb59b7540471e.1497868332.git.arvind.yadav.cs@gmail.com

It's not obvious that when using the new color manager stuff you still
need to wire up the legacy helper to get legacy LUT support. Improve
this with more links. drm_crtc_funcs->gamma_set already explains this
properly.

Cc: Peter Rosin <peda@axentia.se>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620094228.4757-1-daniel.vetter@ffwll.ch

Now that we have a callback to check if crtc and encoder supports a
given mode we can use it in vc4 so that we restrict the number of
probed modes to the ones we can actually display.

Also, remove the mode_fixup() calls as these are no longer needed
because mode_valid() will be called before.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Compile-tested and Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5bea792f91074688c88a2dab8b0a90eec6e98fdf.1495720737.git.joabreu@synopsys.com

I spotted a markup issue, plus adding the descriptions in drm_driver.
Plus a few more links while at it.

I'm still mildly unhappy with the split between fops and ioctls, but I
still think having the ioctls in the uapi chapter makes more sense. Oh
well ...

v2: Rebase.

v3: Move misplace hunk to the right patch.

Cc: Stefan Agner <stefan@agner.ch>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531092045.3950-1-daniel.vetter@ffwll.ch

The magic switching between proper pci driver and shadow-attach isn't
useful anymore since there's no ums+kms drivers left. Let's split this
up properly, calling pci_register_driver for kms drivers and renaming
the shadow-attach init to drm_legacy_pci_init/exit.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch

The only special-case is pci devices, and we can easily handle this in
the core. Do so and drop a pile of boilerplate from drivers.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-5-daniel.vetter@ffwll.ch

Since

commit ca8e2ad7
Author: Thierry Reding <treding@nvidia.com>
Date:   Fri Apr 11 15:23:00 2014 +0200

    drm: Introduce drm_dev_set_unique()

the ->set_busid callback is optional. On top of that the udl one isn't
really fully compliant with the drm uabi, but since only modesetting
ever binds to it (there's no 3d accel on udl) it doesn't matter.

Still, can't harm to aling and use the default used by everyone else.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-4-daniel.vetter@ffwll.ch

We use drm_crtc_ for all the new-style vblank functions which directly
take a struct drm_crtc *. drm_accurate_vblank_count was the odd one
out, correct this to appease my OCD.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-13-daniel.vetter@ffwll.ch

I alwasy get confused about drm_wait_vblank for a split second until I
realize it's the ioctl handler. Unconfuse me, and do it for the legacy
modeset vblank control ioctl too.

While at it also noticed that I misplaced the irq ioctl handler in the
internal header file.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-12-daniel.vetter@ffwll.ch

Unify and review everything, plus make sure it's all correct markup.
Drop the kernel-doc for internal functions. Also rework the overview
section, it's become rather outdated.

Unfortuantely the kernel-doc in drm_driver isn't rendered yet, but
that will change as soon as drm_driver is kernel-docified properly.

Also document properly that drm_vblank_cleanup is optional, the core
calls this already.

v2: Make it clear that cleanup happens in drm_dev_fini for drivers
with their own ->release callback (Thierry).
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-11-daniel.vetter@ffwll.ch

I'm fed up staring at the error message from kernel-doc that
it can't find anything.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-10-daniel.vetter@ffwll.ch

Again, doesn't seem to serve a purpose.

Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-34-daniel.vetter@ffwll.ch

Seems entirely cargo-culted.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-31-daniel.vetter@ffwll.ch

The VC4 KMS driver is implementing its own ->atomic_commit() but there
are a few generic helpers we can use instead of open-coding the logic.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1496392332-8722-4-git-send-email-boris.brezillon@free-electrons.com

This allows mesa to set the tiling format for a BO and have that
tiling format be respected by mesa on the other side of an
import/export (and by vc4 scanout in the kernel), without defining a
protocol to pass the tiling through userspace.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608001336.12842-2-eric@anholt.netAcked-by: NDave Airlie <airlied@redhat.com>

The T tiling format is what V3D uses for textures, with no raster
support at all until later revisions of the hardware (and always at a
large 3D performance penalty).  If we can't scan out V3D's format,
then we often need to do a relayout at some stage of the pipeline,
either right before texturing from the scanout buffer (common in X11
without a compositor) or between a tiled screen buffer right before
scanout (an option I've considered in trying to resolve this
inconsistency, but which means needing to use the dirty fb ioctl and
having some update policy).

T-format scanout lets us avoid either of those shadow copies, for a
massive, obvious performance improvement to X11 window dragging
without a compositor.  Unfortunately, enabling a compositor to work
around the discrepancy has turned out to be too costly in memory
consumption for the Raspbian distribution.

Because the HVS operates a scanline at a time, compositing from T does
increase the memory bandwidth cost of scanout.  On my 1920x1080@32bpp
display on a RPi3, we go from about 15% of system memory bandwidth
with linear to about 20% with tiled.  However, for X11 this still ends
up being a huge performance win in active usage.

This patch doesn't yet handle src_x/src_y offsetting within the tiled
buffer.  However, we fail to do so for untiled buffers already.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608001336.12842-1-eric@anholt.netReviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Smaller scope reduces visibility of variable and makes usage of
uninitialized variable less possible.

Changes in v2:
	- separate declaration and initialization
Changes in v3:
	- add missing signed-off-by tag
Signed-off-by: NDawid Kurek <dawikur@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615174556.GA8872@gmail.com

According to the eLCDIF initialization steps listed in the MX6SX
Reference Manual the eLCDIF block reset is mandatory.

Without performing the eLCDIF reset the display shows garbage content
when the kernel boots.

In earlier tests this issue has not been observed because the bootloader
was previously showing a splash screen and the bootloader display driver
does properly implement the eLCDIF reset.

Add the eLCDIF reset to the driver, so that it can operate correctly
independently of the bootloader.

Tested on a imx6sx-sdb board.

Cc: <stable@vger.kernel.org>
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1494007301-14535-1-git-send-email-fabio.estevam@nxp.com

Forward declarations in C are great but I'm pretty sure one is enough.
Signed-off-by: NDawid Kurek <dawikur@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170614213518.GA3554@gmail.com

This patch supports TM2e panel and the panel has 1600x2560 resolution
in 5.65" physical.

This identify panel type with compatibility string, also invoke
display mode that matches the type. So add the check code for s6e3ha2
compatibility and s6e3hf2 type and select the drm_display_mode of
default and edge type.
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NInki Dae <inki.dae@samsung.com>
[treding@nvidia.com: fixup checkpatch warnings]
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-3-git-send-email-hoegeun.kwon@samsung.com

The samsung s6e3hf2 panel is a 5.65" 1600x2560 AMOLED panel connected
using MIPI-DSI interfaces.

The s6e3hf2 is add to samsung,s6e3ha2.txt binding because it is a
panel similar to the s6e3ha2. So add the compatible string and
comments.
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-2-git-send-email-hoegeun.kwon@samsung.com

Without the dependency, we run into a link error:

drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe':
panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node'

Fixes: 7142afb3 ("drm/panel: Add driver for sitronix ST7789V LCD controller")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419180326.303994-1-arnd@arndb.de

The new S6E3HA2 driver fails to link when backlight is disabled:

ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!

This adds a Kconfig dependency like we have it for some other panel drivers.

Fixes: ed29f942 ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419175939.189098-2-arnd@arndb.de

This adds support for the AU Optronics Corporation 31.5"
FHD (1920x1080) LVDS TFT LCD panel, which can be supported
by the simple panel driver
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-4-l.stach@pengutronix.de

This adds support for the NLT Technologies NL192108AC18-02D
15.6" LVDS FullHD TFT LCD panel, which can be supported
by the simple panel driver.

Timings are taken from the preliminary datasheet, as a final
one is not yet available.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-3-l.stach@pengutronix.de

NLT technologies is the former NEC display business, but changed its
name to NLT Technologies when forming a joint venture with
Shenzhen AVIC OPTOELECTRONICS, Ltd.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-2-l.stach@pengutronix.de

This adds support for the NEC LCD Technologies, Ltd. 12.1"
WXGA (1280x800) LVDS TFT LCD panel, which can be supported
by the simple panel driver.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-1-l.stach@pengutronix.de

Support Innolux P079ZCA 7.85" 768x1024 TFT LCD panel, it is a MIPI DSI
panel.
Signed-off-by: NChris Zhong <zyw@rock-chips.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Tested-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490316692-20506-2-git-send-email-zyw@rock-chips.com

The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
connected to DSI using four lanes.
Signed-off-by: NChris Zhong <zyw@rock-chips.com>
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490316692-20506-1-git-send-email-zyw@rock-chips.com

If one 'drm_gem_handle_create()' fails, we leak somes handles and some
memory.

In order to fix it:
  - move the 'free(bo_state)' at the end of the function so that it is also
    called in the eror handling path. This has the side effect to also try
    to free it if the first 'kcalloc' fails. This is harmless.
  - add a new label, err_delete_handle, in order to delete already
    allocated handles in error handling path
  - remove the now useless 'err' label

The way the code is now written will also delete the handles if the
'copy_to_user()' call fails.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.fr